URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [rtos/] [ecos-3.0/] [packages/] [cygmon/] [current/] [ChangeLog] - Rev 790
Go to most recent revision | Compare with Previous | Blame | View Log
2000-12-04 Drew Moseley <dmoseley@redhat.com>
* misc/monitor_cmd.c (breakpoint_cmd): Fix typo in printf
formatting for error message.
2000-11-20 Drew Moseley <dmoseley@redhat.com>
* cdl/cygmon.cdl: Make sure we don't specify vectors.o and target.ld twice.
2000-11-03 Jonathan Larmour <jlarmour@redhat.com>
* cdl/cygmon.cdl: Improve cygmon.elf make dependencies
2000-10-17 Drew Moseley <dmoseley@redhat.com>
* misc/utils.c: Fix a typo. Also make sure we are ignoring the
'+' characters from gdb.
* misc/monitor_cmd.c: Add a few cache flushes.
* misc/monitor.h: Use the debug port for xvprintf.
2000-08-14 Drew Moseley <dmoseley@redhat.com>
* misc/ecos_bsp.c: Added some include files to fix some build
failures on partially unsupported systems. (ie non-cygmon, etc).
2000-08-12 Drew Moseley <dmoseley@redhat.com>
* misc/bsp/common/debug-io.c (bsp_debug_write): Use
output_gdb_string when stub_is_active.
2000-08-10 Drew Moseley <dmoseley@redhat.com>
* misc/utils.c: Removed some unused functions. Also handle
printing invalid registers.
* misc/monitor_cmd.c: Handle some unprintable characters better.
Also handle displaying of invalid memory locations better.
Add handling for register validity checking.
* misc/monitor.h: Add a conditional field "reg_valid" to struct
regstruct.
* misc/monitor.c: Added a call to a conditionally defined routine
INITIALIZE_MON_EACH_TIME(). This is called everytime the monitor
is invoked. For instance, this is used to determine which
registers have actually been read.
* misc/generic_mem.c: Allow Cygmon to use the Safe memory routines
in the HAL.
* misc/board.h: Added MN10300 basic support.
* misc/cpu-mon.c: Ditto.
* misc/cpu_info.h: Ditto.
* misc/bsp/cpu.h: Ditto.
* misc/bsp/mn10300/gdb-cpu.c: Ditto. New file.
* misc/bsp/mn10300/gdb-cpu.h: Ditto. New file.
* misc/bsp/mn10300/gdb.h: Ditto. New file.
* misc/bsp/mn10300/insn.h: Ditto. New file.
* misc/bsp/mn10300/singlestep.c: Ditto. New file.
* misc/mn10300/board.h: Ditto. New file.
* misc/mn10300/cpu.h: Ditto. New file.
* misc/mn10300/cpu_info.h: Ditto. New file.
* misc/mn10300/mn10300-mon.c: Ditto. New file.
* cdl/cygmon.cdl: Removed dependency on the kernel and Serial I/O.
* misc/ecos_bsp.c: Ditto.
* misc/ecos_dummy.c: Ditto.
2000-07-21 Drew Moseley <dmoseley@redhat.com>
* misc/ecos_bsp.c: Rearrange the linkage between Cygmon and HAL so
that Cygmon needs HAL but not vice-versa. ie HAL no longer calls
any Cygmon functions.
* misc/monitor.c: Ditto.
2000-07-14 Drew Moseley <dmoseley@redhat.com>
* misc/bsp/mips/gdb-cpu.c: New files. Mips based Cygmon now running on top of eCos HAL.
* misc/bsp/mips/gdb-cpu.h: Ditto.
* misc/bsp/mips/gdb.h: Ditto.
* misc/bsp/mips/insn.h: Ditto.
* misc/bsp/mips/singlestep.c: Ditto.
* misc/mips/board.h: Ditto.
* misc/mips/cpu.h: Ditto.
* misc/mips/cpu_info.h: Ditto.
* misc/mips/mips-mon.c: Ditto.
* misc/bsp/common/syscall.c: Added SYS_meminfo call to find out
how much RAM we have.
* misc/bsp/common/syscall.h: Ditto.
* misc/bsp/common/breakpoint.c: Added __ECOS__ support.
* misc/monitor_cmd.c: Cleanup. Added some more error handling.
* misc/utils.c: Ditto.
* misc/monitor.c: Added basic syscall handling to support libgloss.
Added support for using more features of the HAL (ie breakpoints
and exceptions).
* misc/monitor.h: Ditto.
* misc/tservice.h: Ditto.
* misc/bsp/bsp.h: Ditto.
* misc/arm/cpu_info.h: Ditto.
* misc/ledit.c: Cleanup.
* misc/ecos_dummy.c: Support for reset through the HAL.
* misc/ecos_bsp.c: Filled in uart_control function for setting baud rate
through the HAL. Also added VIRTUAL_VECTOR_SUPPORT and support of the
low-level HAL-based serial driver. Also added set_memsize() support.
* misc/bplist-dynamic.c: Added option for using breakpoints in the HAL.
Also, various cleanups of build warnings, etc.
* misc/breakpoints.c: Ditto.
* cdl/cygmon.cdl: Allow cygmon to be built for either Arm or Mips.
* misc/board.h: Move architecture-dependent things out.
* misc/cpu-mon.c: Ditto.
* misc/cpu_info.h: Ditto.
* misc/bsp/cpu.h: Ditto.
* misc/bsp/common/gdb-cpu.c: Ditto.
* misc/bsp/common/gdb-cpu.h: Ditto.
* misc/bsp/common/singlestep.c: Ditto.
2000-01-28 Jesper Skov <jskov@redhat.com>
* misc/Notes_CygMon_PID: Added.
2000-01-27 Jesper Skov <jskov@redhat.com>
* cdl/cygmon.cdl: Include hal.h config for CygMon options defined
by platform CDL.
2000-01-26 Jonathan Larmour <jlarmour@redhat.co.uk>
* cdl/cygmon.cdl: Remove CYGDAT_CYGMON_ENABLE - no longer required
2000-01-25 Jesper Skov <jskov@cygnus.co.uk>
* cdl/cygmon.cdl: Moved console device config to target CDL.
Let target CDL handle binary conversion.
1999-12-17 Bart Veer <bartv@cygnus.co.uk>
* cdl/cygmon.cdl:
Fix a requires property, getting the quoting right
1999-12-14 John Dallaway <jld@cygnus.co.uk>
* cdl/cygmon.cdl: Add custom make rule to build CygMon.
1999-12-06 Gary Thomas <gthomas@cygnus.co.uk>
* misc/arm/arm-mon.c (machine_syscall):
* misc/ecos_bsp.c (_bsp_handle_exception):
* misc/PKGconf.mak: Adding 'syscall' support.
* misc/CygMon_PID.cfg:
* misc/bsp/common/syscall.h:
* misc/bsp/common/syscall.c: New file(s).
1999-11-26 Jonathan Larmour <jlarmour@cygnus.co.uk>
* misc/CygMon_EDB7211.cfg: Rename to misc/CygMon/EDB7xxx.cfg
* misc/CygMon_EDB7xxx.cfg: New file
1999-11-26 Gary Thomas <gthomas@cygnus.co.uk>
* misc/ecos_bsp.c (_bsp_board_init): Use/define HAL symbols
for board/cpu information.
(_bsp_memory_list): Use MLT information here.
* misc/CygMon_EDB7211.cfg: Fix typo. Change startup to be
ROM which gives more useful RAM information.
1999-11-19 Gary Thomas <gthomas@cygnus.co.uk>
* misc/CygMon_EDB7211.cfg: Add platform parameter. Update
patch for latest changes.
1999-11-03 Jesper Skov <jskov@cygnus.co.uk>
* cdl/cygmon.cdl: Added.
1999-10-27 Gary Thomas <gthomas@cygnus.co.uk>
* misc/PKGconf.mak: Add new targets (.bin .srec images).
* include/pkgconf/cygmon.h: Update strings to be more conformant.
* misc/CygMon_EDB7211.cfg: New file for building CygMon.
* include/pkgconf/cygmon.h: Add work-around because packages
can't be disabled by default.
1999-10-26 Gary Thomas <gthomas@cygnus.co.uk>
* include/pkgconf/cygmon.h: Fix typo 'CYGPKC_LIBC'=>'CYGPKG_LIBC'
Also, node type was wrong ('radio' instead of 'boolean')
1999-10-25 Gary Thomas <gthomas@cygnus.co.uk>
* include/pkgconf/cygmon.h: Add configuration options for
console device [name] and extended help. Remove duplicate
boilerplate.
* misc/board.h: Enable "help" via configuration option.
* misc/ecos_bsp.c: Cleanup/remove extra (debug) code.
Add support for console port configuration.
* misc/monitor.c:
* misc/monitor_cmd.c: Cleanup/remove some debug code.
//===========================================================================
// ####GPLCOPYRIGHTBEGIN####
// -------------------------------------------
// This file is part of eCos, the Embedded Configurable Operating System.
// Copyright (C) 1998, 1999, 2000, 2001, 2002 Free Software Foundation, Inc.
//
// This program is free software; you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation; either version 2 or (at your option) any
// later version.
//
// This program is distributed in the hope that it will be useful, but
// WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
// General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program; if not, write to the
// Free Software Foundation, Inc., 51 Franklin Street,
// Fifth Floor, Boston, MA 02110-1301, USA.
// -------------------------------------------
// ####GPLCOPYRIGHTEND####
//===========================================================================
Go to most recent revision | Compare with Previous | Blame | View Log