Subversion Repositories openrisc

# ====================================================================
#
#      adc_at91.cdl
#
#      eCos AT91 ADC configuration data
#
# ====================================================================
## ####ECOSGPLCOPYRIGHTBEGIN####                                            
## -------------------------------------------                              
## This file is part of eCos, the Embedded Configurable Operating System.   
## Copyright (C) 2008 Free Software Foundation, Inc.                        
##
## eCos is free software; you can redistribute it and/or modify it under    
## the terms of the GNU General Public License as published by the Free     
## Software Foundation; either version 2 or (at your option) any later      
## version.                                                                 
##
## eCos is distributed in the hope that it will be useful, but WITHOUT      
## ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or    
## FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License    
## for more details.                                                        
##
## You should have received a copy of the GNU General Public License        
## along with eCos; if not, write to the Free Software Foundation, Inc.,    
## 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.            
##
## As a special exception, if other files instantiate templates or use      
## macros or inline functions from this file, or you compile this file      
## and link it with other works to produce a work based on this file,       
## this file does not by itself cause the resulting work to be covered by   
## the GNU General Public License. However the source code for this file    
## must still be made available in accordance with section (3) of the GNU   
## General Public License v2.                                               
##
## This exception does not invalidate any other reasons why a work based    
## on this file might be covered by the GNU General Public License.         
## -------------------------------------------                              
## ####ECOSGPLCOPYRIGHTEND####                                              
# ====================================================================
######DESCRIPTIONBEGIN####
#
# Author(s):      ccoutand@stmi.com
# Contributors:   
# Date:           2010-02-12
#
#####DESCRIPTIONEND####
#
# ====================================================================


cdl_package CYGPKG_DEVS_ADC_ARM_AT91 {
    display     "ADC hardware device driver for AT91 family of ARM controllers"
    
    parent      CYGPKG_IO_ADC_DEVICES
    active_if   CYGPKG_IO_ADC_DEVICES
    active_if   CYGPKG_HAL_ARM_AT91
    description " 
           This package provides a generic ADC device driver for the on-chip
           ADC peripherals in AT91 processors."
           
    include_dir cyg/io
    compile     -library=libextras.a adc_at91.c
    
    define_proc {
      puts $::cdl_system_header "#define CYGDAT_DEVS_ADC_ARM_AT91_INL <cyg/io/adc_at91.inl>"
    }
    
    # 
    # Primary ADC ( ADC0 )
    #
    cdl_component CYGPKG_DEVS_ADC_ARM_AT91_ADC0 {
       display       "Atmel AT91 ADC port 0 driver"
       flavor        bool
       default_value 1
       description "
           This option includes the device driver for the on-chip ADC 0 of the
           AT91 processors"
    
    
       cdl_interface CYGINT_DEVS_ADC_ARM_AT91_ADC0_CHANNELS {
          display "Number of ADC0 channels"
       }  
   
       cdl_option CYGNUM_DEVS_ADC_ARM_AT91_ADC0_SELECT_TIMER {
          display       "Interrupt priority"
          flavor        data
          legal_values {0 1 2}
          default_value 1
          description   "
              This option selects the timer channel to be used for 
              generating the sampling interval. Timer channel 0 can 
              be assigned as Real Time Kernel clock so timer channel 
              1 is set to be the default value."
       }

       cdl_option CYGNUM_DEVS_ADC_ARM_AT91_ADC0_PRESCAL {
           display       "ADC clock setting"
           flavor        data
           legal_values  0 to 255
           default_value 128
           description   "
               This option sets the AT91 ADC PRESCAL value. 
               ADCClock = MCK / ((PRESCAL + 1) * 2)"
       }

       cdl_option CYGNUM_DEVS_ADC_ARM_AT91_ADC0_STARTUP_TIME {
           display       "ADC start-up time"
           flavor        data
           legal_values  0 to 255
           default_value 128
           description   "
               This option sets the AT91 ADC start-up time value. 
               ADC start-up time = (STARTUP+1) * 8 / ADCClock"
       }

       cdl_option CYGNUM_DEVS_ADC_ARM_AT91_ADC0_SHTIM {
           display       "ADC start up time"
           flavor        data
           legal_values  0 to 15
           default_value 7
           description   "
               This option sets the AT91 ADC Sample and Hold Time. 
               Sample and Hold Time = SHTIM / ADCClock"
       }

       cdl_option CYGNUM_DEVS_ADC_ARM_AT91_ADC0_INTPRIO {
           display       "Interrupt priority"
           flavor        data
           legal_values  0 to 15
           default_value 15
           description   "
               This option selects the interrupt priority for the ADC
               interrupts.  Timer x is used for generating the sample
               clock. So this option configures the interrupt priority
               for timer x. There are 16 priority levels corresponding to
               the values 0 through 15 decimal, of which 15 is the lowest
               priority. The reset value of these registers defaults all
               interrupts to the lowest priority, allowing a single write
               to elevate the priority of an individual interrupt."
       }

       cdl_option CYGNUM_DEVS_ADC_ARM_AT91_ADC0_DEFAULT_RATE {
           display "Default sample rate"
           flavor   data
           legal_values 1 to 10000
           default_value 100
           description "
               The driver will be initialized with the default sample rate.
               If you raise the default sample rate you might need to increase
               the buffer size for each channel."
       }
                
       # Support up to 8 ADC channels
       for { set ::channel 0 } { $::channel < 8 } { incr ::channel } {  
    
           cdl_component CYGPKG_DEVS_ADC_ARM_AT91_ADC0_CHANNEL[set ::channel] {
               display        "Access ADC channel [set ::channel]"
               flavor          bool
               default_value   [set ::channel] == 0
               implements      CYGINT_DEVS_ADC_ARM_AT91_ADC0_CHANNELS
               description "
                   If the application needs to access the on-chip ADC
                   channel [set ::channel] via an eCos ADC driver then
                   this option should be enabled."
     
               cdl_option CYGDAT_DEVS_ADC_ARM_AT91_ADC0_CHANNEL[set ::channel]_NAME {
                   display "Device name"
                   flavor      data
                   default_value   [format {"\"/dev/adc0%d\""} $::channel]
                   description "
                       This option controls the name that an eCos application
                       should use to access this device via cyg_io_lookup(),
                       open(), or similar calls."
               }
        
               cdl_option CYGDAT_DEVS_ADC_ARM_AT91_ADC0_CHANNEL[set ::channel]_BUFSIZE {
                   display "Size of data buffer"
                   flavor  data
                   legal_values  0x01 to 0x2000000
                   default_value 512
                   description "
                       This option controls the number of samples the
                       buffer can store. The required RAM depends on the
                       sample size and on the number of samples. If the
                       sample size is <= 8 bit the the required RAM =
                       size of data buffer. If the sample size is 9 or 10
                       bit then required RAM = size of data buffer * 2."
               } 
           } 
        }
     }
     
    # 
    # ADC1
    #
    cdl_component CYGPKG_DEVS_ADC_ARM_AT91_ADC1 {
       display       "Atmel AT91 ADC port 1 driver"
       flavor        bool
       default_value 0
       
       requires      { CYGHWR_HAL_ARM_AT91 == "M55800A" }
       
       description "
           This option includes the device driver for the on-chip ADC 1 of the
           AT91 processors"
    
    
       cdl_interface CYGINT_DEVS_ADC_ARM_AT91_ADC1_CHANNELS {
          display "Number of ADC1 channels"
       }  
   
       cdl_option CYGNUM_DEVS_ADC_ARM_AT91_ADC1_SELECT_TIMER {
          display       "Interrupt priority"
          flavor        data
          legal_values {0 1 2}
          default_value 2
          description   "
              This option selects the timer channel to be used for 
              generating the sampling interval. Timer channel 0 can 
              be assigned as Real Time Kernel clock so timer channel 
              1 is set to be the default value."
       }

       cdl_option CYGNUM_DEVS_ADC_ARM_AT91_ADC1_PRESCAL {
           display       "ADC clock setting"
           flavor        data
           legal_values  0 to 255
           default_value 128
           description   "
               This option sets the AT91 ADC PRESCAL value. 
               ADCClock = MCK / ((PRESCAL + 1) * 2)"
       }

       cdl_option CYGNUM_DEVS_ADC_ARM_AT91_ADC1_STARTUP_TIME {
           display       "ADC start-up time"
           flavor        data
           legal_values  0 to 255
           default_value 128
           description   "
               This option sets the AT91 ADC start-up time value. 
               ADC start-up time = (STARTUP+1) * 8 / ADCClock"
       }

       cdl_option CYGNUM_DEVS_ADC_ARM_AT91_ADC1_SHTIM {
           display       "ADC start up time"
           flavor        data
           legal_values  0 to 15
           default_value 7
           description   "
               This option sets the AT91 ADC Sample and Hold Time. 
               Sample and Hold Time = SHTIM / ADCClock"
       }

       cdl_option CYGNUM_DEVS_ADC_ARM_AT91_ADC1_INTPRIO {
           display       "Interrupt priority"
           flavor        data
           legal_values  0 to 15
           default_value 15
           description   "
               This option selects the interrupt priority for the ADC
               interrupts.  Timer x is used for generating the sample
               clock. So this option configures the interrupt priority
               for timer x. There are 16 priority levels corresponding to
               the values 0 through 15 decimal, of which 15 is the lowest
               priority. The reset value of these registers defaults all
               interrupts to the lowest priority, allowing a single write
               to elevate the priority of an individual interrupt."
       }

       cdl_option CYGNUM_DEVS_ADC_ARM_AT91_ADC1_DEFAULT_RATE {
           display "Default sample rate"
           flavor   data
           legal_values 1 to 10000
           default_value 100
           description "
               The driver will be initialized with the default sample rate.
               If you raise the default sample rate you might need to increase
               the buffer size for each channel."
       }
                
       # Support up to 8 ADC channels
       for { set ::channel 0 } { $::channel < 8 } { incr ::channel } {  
    
           cdl_component CYGPKG_DEVS_ADC_ARM_AT91_ADC1_CHANNEL[set ::channel] {
               display        "Access ADC channel [set ::channel]"
               flavor          bool
               default_value   [set ::channel] == 0
               implements      CYGINT_DEVS_ADC_ARM_AT91_ADC1_CHANNELS
               description "
                   If the application needs to access the on-chip ADC
                   channel [set ::channel] via an eCos ADC driver then
                   this option should be enabled."
     
               cdl_option CYGDAT_DEVS_ADC_ARM_AT91_ADC1_CHANNEL[set ::channel]_NAME {
                   display "Device name"
                   flavor      data
                   default_value   [format {"\"/dev/adc1%d\""} $::channel]
                   description "
                       This option controls the name that an eCos application
                       should use to access this device via cyg_io_lookup(),
                       open(), or similar calls."
               }
        
               cdl_option CYGDAT_DEVS_ADC_ARM_AT91_ADC1_CHANNEL[set ::channel]_BUFSIZE {
                   display "Size of data buffer"
                   flavor  data
                   legal_values  0x01 to 0x2000000
                   default_value 512
                   description "
                       This option controls the number of samples the
                       buffer can store. The required RAM depends on the
                       sample size and on the number of samples. If the
                       sample size is <= 8 bit the the required RAM =
                       size of data buffer. If the sample size is 9 or 10
                       bit then required RAM = size of data buffer * 2."
               } 
           } 
        }
     }     
     
     cdl_option CYGPKG_DEVS_ADC_ARM_AT91_DEBUG_LEVEL {
         display "Driver debug output level"
         flavor  data
         legal_values {0 1}
         default_value 0
         description   "
              This option specifies the level of debug data output by
              the AT91 ADC device driver. A value of 0 signifies
              no debug data output; 1 signifies normal debug data
              output. If an overrun occurred then this can only be
              detected by debug output messages."         
     }     

     cdl_component CYGSEM_DEVS_ADC_ARM_AT91_SAMPLE_SIZE_LIMIT {
         display       "Sample size limit"
         flavor          bool
         calculated    1
         requires      { ( CYGNUM_IO_ADC_SAMPLE_SIZE == 8 )
                            || ( CYGNUM_IO_ADC_SAMPLE_SIZE == 10 ) }
         description   "
             This component forces a limit (or rounds) the sample
             size for AT91 ADC channels which in the most are 10-bit."
     }

    cdl_option CYGPKG_DEVS_ADC_ARM_AT91_TESTS {
        display "Tests for AT91 ADC driver"
        flavor  data
        no_define
        calculated { "tests/at91_adc_test" }
        description   "
            This option specifies the set of tests for the AT91
            ADC device driver."
    }

}