OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [rtos/] [ecos-3.0/] [packages/] [devs/] [disk/] [ide/] [current/] [src/] [ide_disk.h] - Rev 838

Go to most recent revision | Compare with Previous | Blame | View Log

#ifndef CYGONCE_IDE_DISK_H
#define CYGONCE_IDE_DISK_H
//==========================================================================
//
//      ide_disk.h
//
//      IDE polled mode disk driver  defines
//
//==========================================================================
// ####ECOSGPLCOPYRIGHTBEGIN####                                            
// -------------------------------------------                              
// This file is part of eCos, the Embedded Configurable Operating System.   
// Copyright (C) 1998, 1999, 2000, 2001, 2002, 2004 Free Software Foundation, Inc.
//
// eCos is free software; you can redistribute it and/or modify it under    
// the terms of the GNU General Public License as published by the Free     
// Software Foundation; either version 2 or (at your option) any later      
// version.                                                                 
//
// eCos is distributed in the hope that it will be useful, but WITHOUT      
// ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or    
// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License    
// for more details.                                                        
//
// You should have received a copy of the GNU General Public License        
// along with eCos; if not, write to the Free Software Foundation, Inc.,    
// 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.            
//
// As a special exception, if other files instantiate templates or use      
// macros or inline functions from this file, or you compile this file      
// and link it with other works to produce a work based on this file,       
// this file does not by itself cause the resulting work to be covered by   
// the GNU General Public License. However the source code for this file    
// must still be made available in accordance with section (3) of the GNU   
// General Public License v2.                                               
//
// This exception does not invalidate any other reasons why a work based    
// on this file might be covered by the GNU General Public License.         
// -------------------------------------------                              
// ####ECOSGPLCOPYRIGHTEND####                                              
//==========================================================================
//#####DESCRIPTIONBEGIN####
//
// Author(s):    iz
// Contributors: 
// Date:         2004-10-16
//
//####DESCRIPTIONEND####
//
//==========================================================================
 
// IDE Register Indices
#define IDE_REG_DATA      0
#define IDE_REG_ERROR     1
#define IDE_REG_FEATURES  1
#define IDE_REG_COUNT     2
#define IDE_REG_REASON    2  // ATAPI
#define IDE_REG_LBALOW    3
#define IDE_REG_LBAMID    4
#define IDE_REG_LBAHI     5
#define IDE_REG_DEVICE    6
#define IDE_REG_STATUS    7
#define IDE_REG_COMMAND   7
 
#define IDE_STAT_BSY      0x80
#define IDE_STAT_DRDY     0x40
#define IDE_STAT_SERVICE  0x10
#define IDE_STAT_DRQ      0x08
#define IDE_STAT_CORR     0x04
#define IDE_STAT_ERR      0x01
 
#define IDE_REASON_REL    0x04
#define IDE_REASON_IO     0x02
#define IDE_REASON_COD    0x01
 
/* flag values */
#define IDE_DEV_PRESENT  1  // Device is present
#define IDE_DEV_PACKET   2  // Supports packet interface
#define IDE_DEV_ADDR48   3  // Supports 48bit addressing
 
typedef struct ide_identify_data_t_ {        
    cyg_uint16 general_conf;         // 00    : general configuration   
    cyg_uint16 num_cylinders;        // 01    : number of cylinders (default CHS trans) 
    cyg_uint16 reserved0;            // 02    : reserved 
    cyg_uint16 num_heads;            // 03    : number of heads (default CHS trans) 
    cyg_uint16 num_ub_per_track;     // 04    : number of unformatted bytes per track 
    cyg_uint16 num_ub_per_sector;    // 05    : number of unformatted bytes per sector 
    cyg_uint16 num_sectors;          // 06    : number of sectors per track (default CHS trans) 
    cyg_uint16 num_card_sectors[2];  // 07-08 : number of sectors per card 
    cyg_uint16 reserved1;            // 09    : reserved 
    cyg_uint16 serial[10];           // 10-19 : serial number (string) 
    cyg_uint16 buffer_type;          // 20    : buffer type (dual ported) 
    cyg_uint16 buffer_size;          // 21    : buffer size in 512 increments 
    cyg_uint16 num_ECC_bytes;        // 22    : number of ECC bytes passed on R/W Long cmds 
    cyg_uint16 firmware_rev[4];      // 23-26 : firmware revision (string)
    cyg_uint16 model_num[20];        // 27-46 : model number (string)
    cyg_uint16 rw_mult_support;      // 47    : max number of sectors on R/W multiple cmds
    cyg_uint16 reserved2;            // 48    : reserved 
    cyg_uint16 capabilities;         // 49    : LBA, DMA, IORDY support indicator 
    cyg_uint16 reserved3;            // 50    : reserved 
    cyg_uint16 pio_xferc_timing;     // 51    : PIO data transfer cycle timing mode 
    cyg_uint16 dma_xferc_timing;     // 52    : single word DMA data transfer cycle timing mode 
    cyg_uint16 cur_field_validity;   // 53    : words 54-58 validity (0 == not valid) 
    cyg_uint16 cur_cylinders;        // 54    : number of current cylinders 
    cyg_uint16 cur_heads;            // 55    : number of current heads 
    cyg_uint16 cur_spt;              // 56    : number of current sectors per track 
    cyg_uint16 cur_capacity[2];      // 57-58 : current capacity in sectors 
    cyg_uint16 mult_sectors;         // 59    : multiple sector setting 
    cyg_uint16 lba_total_sectors[2]; // 60-61 : total sectors in LBA mode 
    cyg_uint16 sw_dma;               // 62    : single word DMA support 
    cyg_uint16 mw_dma;               // 63    : multi word DMA support 
    cyg_uint16 apio_modes;           // 64    : advanced PIO transfer mode supported 
    cyg_uint16 min_dma_timing;       // 65    : minimum multiword DMA transfer cycle 
    cyg_uint16 rec_dma_timing;       // 66    : recommended multiword DMA cycle 
    cyg_uint16 min_pio_timing;       // 67    : min PIO transfer time without flow control 
    cyg_uint16 min_pio_iordy_timing; // 68    : min PIO transfer time with IORDY flow control 
//  cyg_uint16 reserved4[187];       // 69-255: reserved 
} ide_identify_data_t;
 
 
typedef struct ide_disk_info_t_ {
    cyg_uint8 port;
    cyg_uint8 chan;
} ide_disk_info_t;
 
// ----------------------------------------------------------------------------
 
static cyg_bool ide_disk_init(struct cyg_devtab_entry *tab);
 
static Cyg_ErrNo ide_disk_read(disk_channel *chan, 
                              void         *buf,
                              cyg_uint32    len, 
                              cyg_uint32    block_num); 
 
 
static Cyg_ErrNo ide_disk_write(disk_channel *chan, 
                               const void   *buf,
                               cyg_uint32    len, 
                               cyg_uint32    block_num); 
 
static Cyg_ErrNo ide_disk_get_config(disk_channel *chan, 
                                    cyg_uint32    key,
                                    const void   *xbuf, 
                                    cyg_uint32   *len);
 
static Cyg_ErrNo ide_disk_set_config(disk_channel *chan, 
                                    cyg_uint32    key,
                                    const void   *xbuf, 
                                    cyg_uint32   *len);
 
static Cyg_ErrNo ide_disk_lookup(struct cyg_devtab_entry **tab,
                                struct cyg_devtab_entry  *sub_tab,
                                const char               *name);
 
DISK_FUNS(ide_disk_funs, 
          ide_disk_read, 
          ide_disk_write, 
          ide_disk_get_config,
          ide_disk_set_config
);
 
// ----------------------------------------------------------------------------
 
#define IDE_DISK_INSTANCE(_number_,_port_,_chan_,_mbr_supp_,_name_)     \
static ide_disk_info_t ide_disk_info##_number_ = {                      \
    port: (cyg_uint8) _port_,                                           \
    chan: (cyg_uint8) _chan_                                            \
};                                                                      \
DISK_CHANNEL(ide_disk_channel##_number_,                                \
             ide_disk_funs,                                             \
             ide_disk_info##_number_,                                   \
             ide_disk_controller,                                       \
             _mbr_supp_,                                                \
             4                                                          \
);                                                                      \
BLOCK_DEVTAB_ENTRY(ide_disk_io##_number_,                               \
                   _name_,                                              \
                   0,                                                   \
                   &cyg_io_disk_devio,                                  \
                   ide_disk_init,                                       \
                   ide_disk_lookup,                                     \
                   &ide_disk_channel##_number_                          \
);
 
// ----------------------------------------------------------------------------
 
#endif // CYGONCE_IDE_DISK_H
 

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.