Subversion Repositories openrisc

#==========================================================================
#
#      lpc2xxx_eth.cdl
#
#      Ethernet driver for NXP LPC2xxx Cores
#
#==========================================================================
## ####ECOSGPLCOPYRIGHTBEGIN####                                            
## -------------------------------------------                              
## This file is part of eCos, the Embedded Configurable Operating System.   
## Copyright (C) 2008 Free Software Foundation, Inc.                        
##
## eCos is free software; you can redistribute it and/or modify it under    
## the terms of the GNU General Public License as published by the Free     
## Software Foundation; either version 2 or (at your option) any later      
## version.                                                                 
##
## eCos is distributed in the hope that it will be useful, but WITHOUT      
## ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or    
## FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License    
## for more details.                                                        
##
## You should have received a copy of the GNU General Public License        
## along with eCos; if not, write to the Free Software Foundation, Inc.,    
## 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.            
##
## As a special exception, if other files instantiate templates or use      
## macros or inline functions from this file, or you compile this file      
## and link it with other works to produce a work based on this file,       
## this file does not by itself cause the resulting work to be covered by   
## the GNU General Public License. However the source code for this file    
## must still be made available in accordance with section (3) of the GNU   
## General Public License v2.                                               
##
## This exception does not invalidate any other reasons why a work based    
## on this file might be covered by the GNU General Public License.         
## -------------------------------------------                              
## ####ECOSGPLCOPYRIGHTEND####                                              
#==========================================================================
######DESCRIPTIONBEGIN####
#
# Author(s):    Uwe Kindler
# Contributors: ilijak
# Date:         2008-08-05
#
#####DESCRIPTIONEND####
#
#========================================================================*/

cdl_package CYGPKG_DEVS_ETH_ARM_LPC2XXX {
    display       "NXP LPC2xxx ethernet driver"
    parent        CYGPKG_IO_ETH_DRIVERS
    active_if     CYGPKG_IO_ETH_DRIVERS
    implements    CYGHWR_NET_DRIVERS
    implements    CYGHWR_NET_DRIVER_ETH0

    include_dir   net
    description   "
       Ethernet driver for NXP LPC2xxx core. This has been tested with the 
       LPC2468, but should be easy to get to work on other LPC2xxx cores that
       have the EMAC peripheral."

    compile       -library=libextras.a if_lpc2xxx.c

    cdl_option CYGPKG_DEVS_ETH_ARM_LPC2XXX_DEBUG_LEVEL {
         display "Driver debug output level"
         flavor  data
         legal_values {0 1 2 3}
         default_value 1
         description   "
             This option specifies the level of debug data output by
             the LPC2XXX ethernet device driver. A value of 0 signifies
             no debug data output; 1 signifies normal debug data
             output; and 2 signifies maximum debug data output (not
             suitable when GDB and application are sharing an ethernet
             port). Debug level 3 is a special kind of debug level. 
             It prints the same debug messages like level 2 but it forces 
             the debug output to the second serial port. This is 
             required for debugging the ethernet driver if the stand-alone 
             network stack from redboot is used. It is possible to print 
             debug messages while an application is loaded and run via GDB
             TCP/IP connection"
    }

    # For backward compatibility with LPC24xx platforms
    # that do not have CYGNUM_HAL_IRQ_PRIORITY_MIN defined.
    cdl_option CYGNUM_DEVS_ETH_IRQ_PRIORITY_MIN {
        display       "Interrupt priority levels"
        flavor        data
        calculated    { CYGNUM_HAL_IRQ_PRIORITY_MIN ? CYGNUM_HAL_IRQ_PRIORITY_MIN : 15 }
        description   "
            For backward compatibility with LPC 24XX plarforms that do
            not have CYGNUM_HAL_IRQ_PRIORITY_MIN defined."
    }

    cdl_option CYGPKG_DEVS_ETH_ARM_LPC2XXX_INTPRIO {
        display       "Interrupt priority"
        flavor        data
        legal_values  0 to CYGNUM_DEVS_ETH_IRQ_PRIORITY_MIN
        default_value CYGNUM_DEVS_ETH_IRQ_PRIORITY_MIN
        description   "
            This option selects the interrupt priority for the EMAC
            interrupts.  The reset value
            of these registers defaults all interrupts to the lowest
            priority, allowing a single write to elevate the priority
            of an individual interrupt."
    }

    cdl_option CYGNUM_DEVS_ETH_ARM_LPC2XXX_RX_BUFS {
        display       "Number of RX buffers"
        flavor        data
        default_value 4
        legal_values  2 to 4
        description   "
            Number of receive buffers. The number of receive buffers defines 
            the number of descriptors in the descriptor array. Each receive 
            descriptor element in the descriptor array has an associated status 
            field which consists of the HashCRC word and Status Information 
            word. Because of a device errata the status words are updated 
            incorrectly if the number of descriptors set is greater than or 
            equal to 5. Therefore the Rx buffers are limited to a maximum 
            of 4. Each buffer is 1536 (0x600) bytes in size"
    }

    cdl_option CYGNUM_DEVS_ETH_ARM_LPC2XXX_TX_BUFS {
        display       "Number of TX descriptors"
        flavor        data
        default_value 10
        legal_values  2 to 10
        description   "
            Number of transmit buffer descriptors. We need one descriptor
            for each element in the scatter/gather list."
    }


    cdl_component CYGPKG_DEVS_ETH_ARM_LPC2XXX_REDBOOT_HOLDS_ESA {
        display         "RedBoot manages ESA initialization data"
        flavor          bool
        default_value   0

        active_if     CYGSEM_HAL_VIRTUAL_VECTOR_SUPPORT
        active_if     (CYGPKG_REDBOOT || CYGSEM_HAL_USE_ROM_MONITOR)

        description   "
            Enabling this option will allow the ethernet station
            address to be acquired from RedBoot's configuration data,
            stored in flash memory.  It can be overridden individually
            by the 'Set the ethernet station address' option for each
            interface."


        cdl_component CYGPKG_DEVS_ETH_ARM_LPC2XXX_REDBOOT_HOLDS_ESA_VARS {
            display        "Export RedBoot command to set ESA in FLASH config"
            flavor         none
            no_define
            description "
                This component contains options which, when enabled, allow
                RedBoot to support the setting of the ESA in the FLASH
                configuration. This can then subsequently be accessed by
                applications using virtual vector calls if those applications
                are also built with
                CYGPKG_DEVS_ETH_ARM_LPC2XXX_REDBOOT_HOLDS_ESA enabled."

            cdl_option CYGSEM_DEVS_ETH_ARM_LPC2XXX_REDBOOT_HOLDS_ESA_ETH0 {
                display         "RedBoot manages ESA for eth0"
                flavor          bool
                default_value   1
                active_if       CYGSEM_REDBOOT_FLASH_CONFIG
                active_if       CYGPKG_REDBOOT_NETWORKING
            }
        }
    }
    cdl_option CYGPKG_DEVS_ETH_ARM_LPC2XXX_MACADDR {
        display "Ethernet station (MAC) address for eth0"
        flavor  data
        default_value {"0x12, 0x34, 0x56, 0x78, 0x9A, 0xBC"}
        description   "The default ethernet station address. This is the
                       MAC address used when no value is found in the
                       RedBoot FLASH configuration field."
    }

    cdl_option  CYGPKG_DEVS_ETH_ARM_LPC2XXX_CFLAGS_ADD {
        display "Additional compiler flags"
        flavor  data
        no_define
        default_value { "-D_KERNEL -D__ECOS" }
        description   "
            This option modifies the set of compiler flags for
            building the Atmel LPC2XXX ethernet driver package.
            These flags are used in addition to the set of global flags."
    }
}

# EOF LPC2XXX_eth.cdl