URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [rtos/] [ecos-3.0/] [packages/] [devs/] [eth/] [arm/] [olpce2294/] [current/] [cdl/] [olpce2294_eth_drivers.cdl] - Rev 798
Go to most recent revision | Compare with Previous | Blame | View Log
# ====================================================================
#
# olpce2294_eth_drivers.cdl
#
# Ethernet drivers - platform dependent support for OLPCE2294
#
# ====================================================================
## ####ECOSGPLCOPYRIGHTBEGIN####
## -------------------------------------------
## This file is part of eCos, the Embedded Configurable Operating System.
## Copyright (C) 1998, 1999, 2000, 2001, 2002, 2008 Free Software Foundation, Inc.
##
## eCos is free software; you can redistribute it and/or modify it under
## the terms of the GNU General Public License as published by the Free
## Software Foundation; either version 2 or (at your option) any later
## version.
##
## eCos is distributed in the hope that it will be useful, but WITHOUT
## ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
## FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
## for more details.
##
## You should have received a copy of the GNU General Public License
## along with eCos; if not, write to the Free Software Foundation, Inc.,
## 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
##
## As a special exception, if other files instantiate templates or use
## macros or inline functions from this file, or you compile this file
## and link it with other works to produce a work based on this file,
## this file does not by itself cause the resulting work to be covered by
## the GNU General Public License. However the source code for this file
## must still be made available in accordance with section (3) of the GNU
## General Public License v2.
##
## This exception does not invalidate any other reasons why a work based
## on this file might be covered by the GNU General Public License.
## -------------------------------------------
## ####ECOSGPLCOPYRIGHTEND####
# ====================================================================
######DESCRIPTIONBEGIN####
#
# Author(s): Sergei Gavrikov
# Contributors: Sergei Gavrikov
# Date: 2008-08-31
#
#####DESCRIPTIONEND####
#
# ====================================================================
cdl_package CYGPKG_DEVS_ETH_ARM_OLPCE2294 {
display "LAN ethernet driver for Olimex LPC-E2294"
parent CYGPKG_IO_ETH_DRIVERS
active_if CYGPKG_IO_ETH_DRIVERS
active_if CYGPKG_HAL_ARM_LPC2XXX_OLPCE2294
implements CYGINT_DEVS_ETH_CL_CS8900A_REQUIRED
requires CYGPKG_DEVS_ETH_CL_CS8900A
# Olimex LPC-E2294 development board has Cirrus Logic CS8900A ethernet
# controller had been wired in a dumb 8-bit mode.
requires CYGIMP_DEVS_ETH_CL_CS8900A_DATABUS_8BIT
include_dir cyg/io
description "
Ethernet driver for Olimex LPC-E2294 board."
cdl_interface CYGINT_DEVS_ETH_CL_CS8900A_REQUIRED {
display "CL CS8900A ethernet driver required"
}
define_proc {
puts $::cdl_system_header "/***** ethernet driver proc output start *****/"
puts $::cdl_system_header "#define CYGDAT_DEVS_ETH_CL_CS8900A_INL <cyg/io/devs_eth_arm_olpce2294.inl>"
puts $::cdl_system_header "#define CYGDAT_DEVS_ETH_CL_CS8900A_CFG <pkgconf/devs_eth_arm_olpce2294.h>"
puts $::cdl_system_header "/***** ethernet driver proc output end *****/"
}
cdl_component CYGSEM_DEVS_ETH_CL_CS8900A_NOINTS {
display "Interrupts are not supported"
calculated 1
description "
Interrups are not supported in 8-bit mode. Polled mode must
be used."
}
cdl_component CYGPKG_DEVS_ETH_ARM_OLPCE2294_ETH0 {
display "OLPCE2294 ethernet port driver"
flavor bool
default_value 1
description "
This option includes the ethernet device driver for the
OLPCE2294 port."
implements CYGHWR_NET_DRIVER_ETH0
implements CYGINT_DEVS_ETH_CL_CS8900A_REQUIRED
implements CYGINT_DEVS_ETH_CL_CS8900A_DATABUS_8BIT
cdl_option CYGDAT_DEVS_ETH_ARM_OLPCE2294_ETH0_NAME {
display "Device name for the ETH0 ethernet driver"
flavor data
default_value {"\"eth0\""}
description "
This option sets the name of the ethernet device."
}
cdl_component CYGSEM_DEVS_ETH_ARM_OLPCE2294_ETH0_SET_ESA {
display "Set the ethernet station address"
flavor bool
calculated 1
description "Enabling this option will allow the ethernet
station address to be forced to the value set by the
configuration."
cdl_option CYGDAT_DEVS_ETH_ARM_OLPCE2294_ETH0_ESA {
display "The ethernet station address"
flavor data
default_value {"{0x08, 0x88, 0x12, 0x34, 0x56, 0x78}"}
description "The ethernet station address"
}
}
}
}
Go to most recent revision | Compare with Previous | Blame | View Log