Subversion Repositories openrisc

2002-11-04  Gary Thomas  <gthomas@ecoscentric.com>

        * src/if_sc_lpe.c (do_delay): Fix problem with overloaded name 'ticks'.
        n.b. the FreeBSD stack has this defined for it's own use.

2002-06-14  Gary Thomas  <gary@chez-thomas.org>

        * src/if_sc_lpe.c: 
        Need to include <pkgconf/io_eth_drivers.h> for proper configuration
        of stand-alone (polled) vs. system (interrupt driven) mode.

2002-05-30  Jonathan Larmour  <jlarmour@redhat.com>

        * src/if_sc_lpe.c: Conditionalize use of thread on CYGPKG_KERNEL
        not CYGPKG_NET.

2002-04-12  Gary Thomas  <gthomas@redhat.com>

        * src/if_sc_lpe.c: Clean up warnings.

2001-10-16  Jesper Skov  <jskov@redhat.com>

        * include/devs_eth_cf.inl: Added buffer parameters.

2001-08-25  Gary Thomas  <gthomas@redhat.com>

        * src/if_sc_lpe.c (sc_lpe_card_handler): Rework ESA discovery code.

2001-08-22  Gary Thomas  <gthomas@redhat.com>

        * src/if_sc_lpe.c: 
        printf() is no longer a part of RedBoot.  Thus all programs
        must use diag_printf() and related functions instead.

2001-06-16  Jesper Skov  <jskov@redhat.com>

        * src/if_sc_lpe.c: Use generic DP83902A driver, only redefining
        the init function to handle card details (which incidently do not
        appear to be fully working).

        * include/devs_eth_cf.inl: Device details moved here so the
        generic driver can access them.

        * cdl/cf_eth_drivers.cdl: Changes to use generic driver. Allow ESA
        to be configured.
        Require DP83902A package.

        * src/dp8390.h: Deleted.

2001-04-13  Gary Thomas  <gthomas@redhat.com>

        * src/if_sc_lpe.c (sc_lpe_card_handler): Work around broken card(s)
        which do not have valid ESA in config EPROM.

2000-09-15  Gary Thomas  <gthomas@redhat.com>

        * src/if_sc_lpe.c: Suppress noisy message which seems to sometimes
        happen if the card is re-initialized from warm.

2000-09-14  Gary Thomas  <gthomas@redhat.com>

        * src/if_sc_lpe.c: Better recovery for bad devices [stand-alone].

2000-09-13  Gary Thomas  <gthomas@redhat.com>

        * src/if_sc_lpe.c: Fix handling of receive buffer overflow,
        i.e. missed data.  [quietly ignored]

        * src/dp8390.h: Update layout of Tx/Rx buffers.

2000-09-12  Gary Thomas  <gthomas@redhat.com>

        * src/if_sc_lpe.c (sc_lpe_card_handler): Handle case when card 
        is warm (powered up from boot ROM).

2000-09-01  Hugo Tyson  <hmt@cygnus.co.uk>

        * src/if_sc_lpe.c (sc_lpe_init): Work with new fast net
        thread to do all the copying work instead of loading up DSR time.
        In detail:
         o New "deliver" function in the interface record.  It's the same
         function as the poll entry; sc_lpe_int().
         o In registering the interrupt handler, use eth_drv_dsr (from the
           logical driver) instead of sc_lpe_int.

2000-08-29  Gary Thomas  <gthomas@redhat.com>

        * src/if_sc_lpe.c (sc_lpe_recv): Better handling if upper layer
        had no buffers [this routine called anyway].

2000-08-28  Gary Thomas  <gthomas@redhat.com>

        * src/if_sc_lpe.c: Better handling of "hot" cards (i.e. one
        initialized by a debug environment).

2000-08-23  Gary Thomas  <gthomas@redhat.com>

        * src/if_sc_lpe.c: Add new function to return interrupt vector
        used by interface.  Also, handle interrupts from interface even
        if there is no kernel (CF callback).

2000-08-03  Gary Thomas  <gthomas@redhat.com>

        * src/if_sc_lpe.c: Ensure DSR locked while initializing hardware.

        * cdl/cf_eth_drivers.cdl: Ethernet driver package hierarchy changed.

2000-07-26  Gary Thomas  <gthomas@redhat.com>

        * src/if_sc_lpe.c: Update for new eth_drv interfaces (via *sc).

2000-07-18  Gary Thomas  <gthomas@redhat.com>

        * src/if_sc_lpe.c (sc_lpe_RxEvent): Handle case where chip gets lost
        and keeps returning the same input packet (hardware bug?).

2000-07-16  Gary Thomas  <gthomas@redhat.com>

        * src/if_sc_lpe.c (sc_lpe_card_handler): Add initialization message and
        timeout when running stand-alone.

2000-07-15  Gary Thomas  <gthomas@redhat.com>

        * src/if_sc_lpe.c: CF interrupts are now handled by the slot handler,
        not directly in this code.

2000-07-14  Gary Thomas  <gthomas@redhat.com>

        * cdl/cf_eth_drivers.cdl: 
        * src/if_sc_lpe.c: Support building in eCos and stand-alone modes.

//===========================================================================
// ####GPLCOPYRIGHTBEGIN####                                                
// -------------------------------------------                              
// This file is part of eCos, the Embedded Configurable Operating System.   
// Copyright (C) 1998, 1999, 2000, 2001, 2002 Free Software Foundation, Inc.
//
// This program is free software; you can redistribute it and/or modify     
// it under the terms of the GNU General Public License as published by     
// the Free Software Foundation; either version 2 or (at your option) any   
// later version.                                                           
//
// This program is distributed in the hope that it will be useful, but      
// WITHOUT ANY WARRANTY; without even the implied warranty of               
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU        
// General Public License for more details.                                 
//
// You should have received a copy of the GNU General Public License        
// along with this program; if not, write to the                            
// Free Software Foundation, Inc., 51 Franklin Street,                      
// Fifth Floor, Boston, MA  02110-1301, USA.                                
// -------------------------------------------                              
// ####GPLCOPYRIGHTEND####                                                  
//===========================================================================