OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [rtos/] [ecos-3.0/] [packages/] [devs/] [eth/] [ns/] [dp83902a/] [current/] [ChangeLog] - Rev 810

Go to most recent revision | Compare with Previous | Blame | View Log

2004-08-12  Jani Monoses <jani@iv.ro>

        * src/if_dp83902a.c: Fix builing with lwip.

2003-11-19  David Woodhouse  <dwmw2@redhat.com>

        * src/if_dp83902a.c: Set STOP bit in CR after setting CURP 
        register; required for AX88796 chip. Fix handling of BNDRY 
        pointer w.r.t. ring buffer wrap-around. Add extra delays
        ifdef CYGHWR_NS_DP83902A_PLF_BROKEN_RX_DMA.

2002-06-14  Gary Thomas  <gary@chez-thomas.org>

        * src/if_dp83902a.c: 
        Need to include <pkgconf/io_eth_drivers.h> for proper configuration
        of stand-alone (polled) vs. system (interrupt driven) mode.

2002-05-30  Jonathan Larmour  <jlarmour@redhat.com>

        * src/if_dp83902a.c: Use CYGINT_IO_ETH_INT_SUPPORT_REQUIRED instead
        of CYGPKG_NET where required.

2002-04-12  Gary Thomas  <gthomas@redhat.com>

        * src/if_dp83902a.c: Clean up warnings.

2002-03-28  Gary Thomas  <gthomas@redhat.com>

        * cdl/ns_dp83902a_eth_drivers.cdl: Fix spelling of _OPTIONS
        component as this is magic (CDL requires that it match the
        package or it is ignored).

2002-01-14  Jesper Skov  <jskov@redhat.com>

        * src/if_dp83902a.c (dp83902a_ClearCounters): Fix warning.

2001-12-10  Richard Sandiford  <rsandifo@redhat.com>

        * src/if_dp83902a.c (dp83902a_RxEvent): Remove unused argument.
        (dp83902a_TxEvent): Likewise.
        (dp83902a_BufEvent): Remove.
        (dp83902a_ClearCounters): New.
        (dp83902a_Overflow): New.
        (dp83902a_poll): Rework polling loop to use the new functions.

2001-10-16  Jesper Skov  <jskov@redhat.com>

        * include/dp83902a.h: Removed hardwired buffer
        allocation. Replaced with per-device configuration.
        * src/if_dp83902a.c: Same.

2001-10-15  Jesper Skov  <jskov@redhat.com>

        * include/dp83902a.h: Added new page allocation layout.

2001-10-12  Gary Thomas  <gthomas@redhat.com>

        * src/if_dp83902a.c: Leave out interrupt code - not needed in 
        non-NET configurations.

2001-10-10  Gary Thomas  <gthomas@redhat.com>

        * src/if_dp83902a.c: 
        * include/dp83902a.h: More flexible setup.  Chip reset address is
        now in device data, along with changes to the PLF reset functions.
        Also, a new PLF init function can be defined which allows the driver
        to work in a PCI enviroment (addresses unknown at compile time).

2001-09-12  Jesper Skov  <jskov@redhat.com>

        * src/if_dp83902a.c: Apply a little more DMA magic.

2001-08-25  Gary Thomas  <gthomas@redhat.com>

        * include/dp83902a.h (DP_DATAPORT): Add - used by ESA discovery
        on SC/LPE card.

2001-06-21  Jesper Skov  <jskov@redhat.com>

        * src/if_dp83902a.c: Fix various build problems when net package
        is included.

2001-06-16  Jesper Skov  <jskov@redhat.com>

        * src/if_dp83902a.c (dp83902a_poll): Ignore spurious Tx events.

2001-06-15  Jesper Skov  <jskov@redhat.com>

        * src/if_dp83902a.c: Added crude CR race check. Use plf interrupt
        clear to allow for CF driver to use this driver. Cleaned up debug
        output some.
        (dp83902a_send): Added some magic delays to get driver working on
        some (apparently) broken boards.

        * src/dp83902a.h: Moved..
        * include/dp83902a.h: to here. Moved macro definitions here from
        the src file.

        * cdl/ns_dp83902a_eth_drivers.cdl: Export header file.

2001-06-14  Jesper Skov  <jskov@redhat.com>

        * src/if_dp83902a.c: Added some more debug info.

        * src/dp83902a.h: Added 16bit/BE macros (untested).

        * src/if_dp83902a.c: Add some debug code, fix endian issue. Proper
        handling of odd-length reads in 16bit mode.

2001-06-13  Jesper Skov  <jskov@redhat.com>

        * src/if_dp83902a.c: Assume LE ordering of read header data.

        * src/dp83902a.h: BE/LE versions of data IO. Define proper DCR
        init value depending on data access width.

        * Cloned from DP8390 driver.

//===========================================================================
// ####GPLCOPYRIGHTBEGIN####                                                
// -------------------------------------------                              
// This file is part of eCos, the Embedded Configurable Operating System.   
// Copyright (C) 1998, 1999, 2000, 2001, 2002 Free Software Foundation, Inc.
//
// This program is free software; you can redistribute it and/or modify     
// it under the terms of the GNU General Public License as published by     
// the Free Software Foundation; either version 2 or (at your option) any   
// later version.                                                           
//
// This program is distributed in the hope that it will be useful, but      
// WITHOUT ANY WARRANTY; without even the implied warranty of               
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU        
// General Public License for more details.                                 
//
// You should have received a copy of the GNU General Public License        
// along with this program; if not, write to the                            
// Free Software Foundation, Inc., 51 Franklin Street,                      
// Fifth Floor, Boston, MA  02110-1301, USA.                                
// -------------------------------------------                              
// ####GPLCOPYRIGHTEND####                                                  
//===========================================================================
        
        

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.