URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [rtos/] [ecos-3.0/] [packages/] [devs/] [eth/] [powerpc/] [fec/] [current/] [cdl/] [fec_eth_drivers.cdl] - Rev 786
Compare with Previous | Blame | View Log
# ====================================================================
#
# fec_eth_drivers.cdl
#
# Ethernet drivers - platform dependent support for PowerPC MPC8xx
#
# ====================================================================
## ####ECOSGPLCOPYRIGHTBEGIN####
## -------------------------------------------
## This file is part of eCos, the Embedded Configurable Operating System.
## Copyright (C) 1998, 1999, 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
##
## eCos is free software; you can redistribute it and/or modify it under
## the terms of the GNU General Public License as published by the Free
## Software Foundation; either version 2 or (at your option) any later
## version.
##
## eCos is distributed in the hope that it will be useful, but WITHOUT
## ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
## FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
## for more details.
##
## You should have received a copy of the GNU General Public License
## along with eCos; if not, write to the Free Software Foundation, Inc.,
## 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
##
## As a special exception, if other files instantiate templates or use
## macros or inline functions from this file, or you compile this file
## and link it with other works to produce a work based on this file,
## this file does not by itself cause the resulting work to be covered by
## the GNU General Public License. However the source code for this file
## must still be made available in accordance with section (3) of the GNU
## General Public License v2.
##
## This exception does not invalidate any other reasons why a work based
## on this file might be covered by the GNU General Public License.
## -------------------------------------------
## ####ECOSGPLCOPYRIGHTEND####
# ====================================================================
######DESCRIPTIONBEGIN####
#
# Author(s): gthomas
# Original data: gthomas
# Contributors:
# Date: 2001-01-21
#
#####DESCRIPTIONEND####
#
# ====================================================================
cdl_package CYGPKG_DEVS_ETH_POWERPC_FEC {
display "MPC8xx FEC ethernet driver"
parent CYGPKG_IO_ETH_DRIVERS
active_if CYGPKG_IO_ETH_DRIVERS
active_if CYGPKG_HAL_POWERPC
active_if CYGPKG_HAL_POWERPC_MPC8xx
implements CYGHWR_NET_DRIVERS
implements CYGHWR_NET_DRIVER_ETH0
implements CYGINT_IO_ETH_MULTICAST
include_dir .
include_files ; # none _exported_ whatsoever
# Debug I/O during network stack initialization is not reliable
requires { !CYGPKG_NET || CYGPKG_NET_FORCE_SERIAL_CONSOLE == 1 }
description "Fast ethernet driver for PowerPC MPC8xxT boards."
compile -library=libextras.a if_fec.c
cdl_option CYGNUM_DEVS_ETH_POWERPC_FEC_BD_OFFSET {
display "Buffer descriptors offset in PRAM"
flavor data
default_value 0x2C00
description "
This option specifies the address of the buffer descriptors
used by the PowerPC FEC/ethernet device."
}
cdl_option CYGNUM_DEVS_ETH_POWERPC_FEC_BUFSIZE {
display "Buffer size"
flavor data
default_value 1520
description "
This option specifies the size of the internal buffers used
for the PowerPC FEC/ethernet device."
}
cdl_option CYGNUM_DEVS_ETH_POWERPC_FEC_TxNUM {
display "Number of output buffers"
flavor data
legal_values 2 to 64
default_value 16
description "
This option specifies the number of output buffer packets
to be used for the PowerPC FEC/ethernet device."
}
cdl_option CYGNUM_DEVS_ETH_POWERPC_FEC_RxNUM {
display "Number of input buffers"
flavor data
legal_values 2 to 64
default_value 16
description "
This option specifies the number of input buffer packets
to be used for the PowerPC FEC/ethernet device."
}
cdl_component CYGSEM_DEVS_ETH_POWERPC_FEC_RESET_PHY {
display "Reset and reconfigure PHY"
flavor bool
default_value { CYG_HAL_STARTUP != "RAM" }
description "
This option allows control over the physical transceiver"
cdl_option CYGNUM_DEVS_ETH_POWERPC_FEC_LINK_MODE {
display "Initial link mode"
flavor data
legal_values { "10Mb" "100Mb" "Auto" }
default_value { "Auto" }
description "
This option specifies initial mode for the physical
link. The PHY will be reset and then set to this mode."
}
}
cdl_component CYGSEM_DEVS_ETH_POWERPC_FEC_STATUS_LEDS {
display "Display I/O status via LEDs"
flavor bool
default_value 0
description "
If this option is set, and the platform defines LED access
functions, then I/O status will be displayed using the LEDs.
In particular, varying LEDs will be illuminated while the
device is busy transmitting a buffer, or handing an input
packet."
}
cdl_component CYGPKG_DEVS_ETH_POWERPC_FEC_OPTIONS {
display "MPC8xx FEC ethernet driver build options"
flavor none
no_define
cdl_option CYGPKG_DEVS_ETH_POWERPC_FEC_CFLAGS_ADD {
display "Additional compiler flags"
flavor data
no_define
default_value { "-D_KERNEL -D__ECOS" }
description "
This option modifies the set of compiler flags for
building the MPC8xx FEC ethernet driver package. These flags are used in addition
to the set of global flags."
}
}
}