Subversion Repositories openrisc

//==========================================================================
//
//      sh_se7751_flash.c
//
//      Flash programming for Fujitsu/AMD device on SH SE7751 board
//
//==========================================================================
// ####ECOSGPLCOPYRIGHTBEGIN####                                            
// -------------------------------------------                              
// This file is part of eCos, the Embedded Configurable Operating System.   
// Copyright (C) 1998, 1999, 2000, 2001, 2002 Free Software Foundation, Inc.
//
// eCos is free software; you can redistribute it and/or modify it under    
// the terms of the GNU General Public License as published by the Free     
// Software Foundation; either version 2 or (at your option) any later      
// version.                                                                 
//
// eCos is distributed in the hope that it will be useful, but WITHOUT      
// ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or    
// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License    
// for more details.                                                        
//
// You should have received a copy of the GNU General Public License        
// along with eCos; if not, write to the Free Software Foundation, Inc.,    
// 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.            
//
// As a special exception, if other files instantiate templates or use      
// macros or inline functions from this file, or you compile this file      
// and link it with other works to produce a work based on this file,       
// this file does not by itself cause the resulting work to be covered by   
// the GNU General Public License. However the source code for this file    
// must still be made available in accordance with section (3) of the GNU   
// General Public License v2.                                               
//
// This exception does not invalidate any other reasons why a work based    
// on this file might be covered by the GNU General Public License.         
// -------------------------------------------                              
// ####ECOSGPLCOPYRIGHTEND####                                              
//==========================================================================
//#####DESCRIPTIONBEGIN####
//
// Author(s):    jskov
// Contributors: jskov
// Date:         2001-07-09
// Purpose:      
// Description:  
//              
//####DESCRIPTIONEND####
//
//==========================================================================
 
#include <cyg/infra/cyg_type.h>
 
//--------------------------------------------------------------------------
// Device properties
 
#define CYGNUM_FLASH_INTERLEAVE	(2)
#define CYGNUM_FLASH_SERIES	(1)
#define CYGNUM_FLASH_WIDTH      (16)
#define CYGNUM_FLASH_BASE 	(plf_flash_base)
 
static cyg_uint32 plf_flash_base;
 
//--------------------------------------------------------------------------
// Platform specific extras
 
static void plf_flash_init(void);
#define CYGHWR_FLASH_AM29XXXXX_PLF_INIT() plf_flash_init()
 
//--------------------------------------------------------------------------
// Now include the driver code.
#include "cyg/io/flash_am29xxxxx.inl"
 
//--------------------------------------------------------------------------
// Magic to determine location of flash
// This works by querying at the location where we expect the EPROM to
// be. Then the returned data is compared with the data at that location.
// If there's a match, assume that to be the location of the EPROM.
// Otherwise it's at the other location.
//
// This is done to avoid having separate configurations for the two board
// configurations. This is simple, has negligible overhead, and Just Works.
void
plf_flash_init(void)
{
    flash_data_t id[2];
    flash_data_t* p;
 
    plf_flash_base = 0xa1000000;
    flash_dev_query(id);
 
    p = (flash_data_t*)0xa1000000;
    if (id[0] == *p++ && id[1] == *p)
        plf_flash_base = 0xa0000000;
 
    // Make that the cached region.
    plf_flash_base &= ~0x20000000;
}
 
// ------------------------------------------------------------------------
// EOF sh_se7751_flash.c