Subversion Repositories openrisc

# ====================================================================
#
#      ser_arm_lpc24xx.cdl
#
#      eCos serial ARM LPC24XX / Cortex-M LPC17XX configuration data
#
# ====================================================================
## ####ECOSGPLCOPYRIGHTBEGIN####                                            
## -------------------------------------------                              
## This file is part of eCos, the Embedded Configurable Operating System.   
## Copyright (C) 1998, 1999, 2000, 2001, 2002, 2004, 2011 Free Software Foundation, Inc.
##
## eCos is free software; you can redistribute it and/or modify it under    
## the terms of the GNU General Public License as published by the Free     
## Software Foundation; either version 2 or (at your option) any later      
## version.                                                                 
##
## eCos is distributed in the hope that it will be useful, but WITHOUT      
## ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or    
## FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License    
## for more details.                                                        
##
## You should have received a copy of the GNU General Public License        
## along with eCos; if not, write to the Free Software Foundation, Inc.,    
## 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.            
##
## As a special exception, if other files instantiate templates or use      
## macros or inline functions from this file, or you compile this file      
## and link it with other works to produce a work based on this file,       
## this file does not by itself cause the resulting work to be covered by   
## the GNU General Public License. However the source code for this file    
## must still be made available in accordance with section (3) of the GNU   
## General Public License v2.                                               
##
## This exception does not invalidate any other reasons why a work based    
## on this file might be covered by the GNU General Public License.         
## -------------------------------------------                              
## ####ECOSGPLCOPYRIGHTEND####                                              
# ====================================================================
######DESCRIPTIONBEGIN####
#
# Author(s):      Uwe Kindler
# Original data:  gthomas, jskov
# Contributors:   ilijak
# Date:           2008-07-06
#
#####DESCRIPTIONEND####
#
# ====================================================================

cdl_package CYGPKG_IO_SERIAL_ARM_LPC24XX {
    display       "ARM LPC24XX / Cortex-M LPC17XX serial device drivers"

    parent        CYGPKG_IO_SERIAL_DEVICES
    active_if     CYGPKG_IO_SERIAL
    active_if     ( CYGPKG_HAL_ARM_LPC24XX || CYGPKG_HAL_CORTEXM_LPC17XX )
    implements    CYGINT_IO_SERIAL_GENERIC_16X5X_CHAN_INTPRIO
    requires      CYGPKG_ERROR
    include_dir   cyg/io

    description   "
           This option enables the serial device drivers for the ARM
           LPC24XX and Cortex-M LPC17XX."

    # FIXME: This really belongs in the GENERIC_16X5X package
    cdl_interface CYGINT_IO_SERIAL_GENERIC_16X5X_REQUIRED {
        display   "Generic 16x5x serial driver required"
    }
    define_proc {
        puts $::cdl_header "#define CYGPRI_IO_SERIAL_GENERIC_16X5X_STEP 4"
    }

    requires {
        is_active(CYGPKG_HAL_CORTEXM_LPC17XX)
        implies CYGPKG_IO_SERIAL_GENERIC_16X5X_XMIT_REQUIRE_PRIME == "1"
    }

    define_proc {
        puts $::cdl_system_header "/***** serial driver proc output start *****/"
        puts $::cdl_system_header "#define CYGDAT_IO_SERIAL_GENERIC_16X5X_INL <cyg/io/arm_lpc24xx_ser.inl>"
        puts $::cdl_system_header "#define CYGDAT_IO_SERIAL_GENERIC_16X5X_CFG <pkgconf/io_serial_arm_lpc24xx.h>"
        puts $::cdl_system_header "/*****  serial driver proc output end  *****/"
    }

    # For backward compatibility with LPC24XX platforms
    cdl_option CYGNUM_IO_SERIAL_IRQ_PRIORITY_MIN {
        display       "Interrupt priority levels"
        flavor        data
        calculated    { CYGNUM_HAL_IRQ_PRIORITY_MIN ? CYGNUM_HAL_IRQ_PRIORITY_MIN : 15 }
        description   "
            For backward compatibility with LPC 24XX plarforms that
            do not have CYGNUM_HAL_IRQ_PRIORITY_MIN defined."
    }

    # Support up to 4 on-chip UART modules. The number may vary between
    # processor variants so it is easy to update this here
    for { set ::channel 0 } { $::channel < 4 } { incr ::channel } {

        cdl_interface CYGINT_IO_SERIAL_LPC24XX_UART[set ::channel] {
            display       "Platform provides UART [set ::channel]"
            flavor        bool
            description   "
                This interface will be implemented if the specific
                LPC24XX / LPC17XX processor being used has on-chip UART
                [set ::channel], and if that UART is accessible on the
                target hardware."
        }

        cdl_component CYGPKG_IO_SERIAL_ARM_LPC24XX_SERIAL[set ::channel] {
            display       "ARM LPC24XX / Cortex LPC17XX UART [set ::channel] driver"
            flavor        bool
            active_if     CYGINT_IO_SERIAL_LPC24XX_UART[set ::channel]
            default_value 1

            implements CYGINT_IO_SERIAL_GENERIC_16X5X_REQUIRED
            implements CYGINT_IO_SERIAL_FLOW_CONTROL_HW
            implements CYGINT_IO_SERIAL_LINE_STATUS_HW

            description   "
                This option includes the serial device driver for the
                ARM LPC24XX / LPC17XX UART [set ::channel]."

            cdl_option CYGDAT_IO_SERIAL_ARM_LPC24XX_SERIAL[set ::channel]_NAME {
                display       "Device name for UART [set ::channel]"
                flavor        data
                default_value [format {"\"/dev/ser%d\""} $::channel]
                description   "
                    This option specifies the name of the serial device
                    for the ARM LPC24XX / LPC17XX UART [set ::channel]."
            }

            cdl_option CYGNUM_IO_SERIAL_ARM_LPC24XX_SERIAL[set ::channel]_BAUD {
                display       "Baud rate for UART [set ::channel]"
                flavor        data
                legal_values  { 50 75 110 "134_5" 150 200 300 600 1200 1800
                                2400 3600 4800 7200 9600 14400 19200 38400
                                57600 115200 230400 }
                default_value 38400
                description   "
                    This option specifies the default baud rate (speed)
                    for the ARM LPC24XX / LPC17XX UART [set ::channel]."
            }

            cdl_option CYGNUM_IO_SERIAL_ARM_LPC24XX_SERIAL[set ::channel]_BUFSIZE {
                display       "Buffer size for the UART [set ::channel]"
                flavor        data
                legal_values  0 to 8192
                default_value 128
                description   "
                    This option specifies the size of the internal buffers
                    used for the ARM LPC24XX / LPC17XX UART [set ::channel]."
            }

            cdl_option CYGNUM_IO_SERIAL_ARM_LPC24XX_SERIAL[set ::channel]_INTPRIO {
                display       "Interrupt priority of UART [set ::channel]"
                flavor        data
                legal_values  0 to CYGNUM_IO_SERIAL_IRQ_PRIORITY_MIN
                default_value CYGNUM_IO_SERIAL_IRQ_PRIORITY_MIN
                description   "
                    This option selects the interupt priority for
                    the UART [set ::channel] interrupts. The
                    reset value of these registers defaults all interrupt
                    to the lowest priority, allowing a single write to
                    elevate the priority of an individual interrupt."
            }
        }
    }

    cdl_component CYGPKG_IO_SERIAL_ARM_LPC24XX_TESTING {
        display    "Testing parameters"
        flavor     bool
        calculated 1
        active_if  CYGPKG_IO_SERIAL_ARM_LPC24XX_SERIAL0

        implements CYGINT_IO_SERIAL_TEST_SKIP_9600
        implements CYGINT_IO_SERIAL_TEST_SKIP_115200
        implements CYGINT_IO_SERIAL_TEST_SKIP_PARITY_EVEN

        cdl_option CYGPRI_SER_TEST_SER_DEV {
            display       "Serial device used for testing"
            flavor        data
            default_value { CYGDAT_IO_SERIAL_ARM_LPC24XX_SERIAL0_NAME }
        }

        define_proc {
            puts $::cdl_header "#define CYGPRI_SER_TEST_CRASH_ID \"armlpc24xx\""
            puts $::cdl_header "#define CYGPRI_SER_TEST_TTY_DEV  \"/dev/tty0\""
        }
    }
}

# EOF ser_arm_lpc24xx.cdl