URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [rtos/] [ecos-3.0/] [packages/] [devs/] [serial/] [freescale/] [uart/] [drv/] [current/] [cdl/] [ser_freescale_uart.cdl] - Rev 810
Go to most recent revision | Compare with Previous | Blame | View Log
# ====================================================================
#
# ser_freescale_uart.cdl
#
# eCos serial Freescale UART configuration data
#
# ====================================================================
## ####ECOSGPLCOPYRIGHTBEGIN####
## -------------------------------------------
## This file is part of eCos, the Embedded Configurable Operating System.
## Copyright (C) 2011 Free Software Foundation, Inc.
##
## eCos is free software; you can redistribute it and/or modify it under
## the terms of the GNU General Public License as published by the Free
## Software Foundation; either version 2 or (at your option) any later
## version.
##
## eCos is distributed in the hope that it will be useful, but WITHOUT
## ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
## FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
## for more details.
##
## You should have received a copy of the GNU General Public License
## along with eCos; if not, write to the Free Software Foundation, Inc.,
## 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
##
## As a special exception, if other files instantiate templates or use
## macros or inline functions from this file, or you compile this file
## and link it with other works to produce a work based on this file,
## this file does not by itself cause the resulting work to be covered by
## the GNU General Public License. However the source code for this file
## must still be made available in accordance with section (3) of the GNU
## General Public License v2.
##
## This exception does not invalidate any other reasons why a work based
## on this file might be covered by the GNU General Public License.
## -------------------------------------------
## ####ECOSGPLCOPYRIGHTEND####
# ====================================================================
######DESCRIPTIONBEGIN####
#
# Author(s): Ilija Kocho <ilijak@siva.com.mk>
# Original data:
# Contributors:
# Date: 2011-02-12
#
#####DESCRIPTIONEND####
#
# ====================================================================
cdl_package CYGPKG_IO_SERIAL_FREESCALE_UART {
display "Freescale UART device driver"
parent CYGPKG_IO_SERIAL_DEVICES
active_if CYGPKG_IO_SERIAL
requires CYGPKG_IO_SERIAL_FREESCALE_UART_HDR
requires CYGPKG_ERROR
include_dir cyg/io
description "
This option enables the serial device drivers for the
Freescale UART, an on-chip serial controller found on some
freescale microcontrollers such as Kinetis, etc."
compile -library=libextras.a ser_freescale_uart.c
define_proc {
puts $::cdl_system_header "/***** serial driver proc output start *****/"
puts $::cdl_system_header "#define CYGDAT_IO_SERIAL_DEVICE_HEADER <pkgconf/io_serial_freescale_uart.h>"
puts $::cdl_system_header "/***** serial driver proc output end *****/"
}
# Support up to 6 on-chip UART modules. The number may vary between
# processor variants so it is easy to update this here
for { set ::channel 0 } { $::channel < 6 } { incr ::channel } {
cdl_interface CYGINT_IO_SERIAL_FREESCALE_UART[set ::channel] {
display "Platform provides UART [set ::channel]"
flavor bool
description "
This interface will be implemented if the specific
controller being used has on-chip UART [set ::channel], and if
that UART is accessible on the target hardware."
}
cdl_component CYGPKG_IO_SERIAL_FREESCALE_UART[set ::channel] {
display "Freescale UART port [set ::channel] driver"
flavor bool
active_if CYGINT_IO_SERIAL_FREESCALE_UART[set ::channel]
default_value CYGINT_IO_SERIAL_FREESCALE_UART[set ::channel]
implements CYGINT_IO_SERIAL_TTY_TTY[set ::channel]
description "
This option includes the serial device driver for Freescale
UART port [set ::channel]."
cdl_option CYGDAT_IO_SERIAL_FREESCALE_UART[set ::channel]_NAME {
display "Device name for Freescale UART port [set ::channel]"
flavor data
default_value [ format {"\"/dev/ser%d\""} $::channel ]
description "
This option specifies the device name for
Freescale UART port [set ::channel]."
}
cdl_option CYGNUM_IO_SERIAL_FREESCALE_UART[set ::channel]_BAUD {
display "Baud rate for the Freescale UART port [set ::channel] driver"
flavor data
legal_values { 300 600 1200 2400 4800 9600 14400 19200 38400
57600 115200 230400 }
default_value 38400
description "
This option specifies the default baud rate for the
UART port [set ::channel]."
}
cdl_option CYGNUM_IO_SERIAL_FREESCALE_UART[set ::channel]_BUFSIZE {
display "Buffer size for the Freescale UART port [set ::channel] driver"
flavor data
legal_values 0 to 8192
default_value 128
description "
This option specifies the size of the internal buffers used
for Freescale UART port [set ::channel]."
}
cdl_option CYGNUM_IO_SERIAL_FREESCALE_UART[set ::channel]_INT_PRIORITY {
display "Freescale UART port [set ::channel] interrupt priority"
flavor data
default_value CYGNUM_IO_SERIAL_FREESCALE_UART[set ::channel]_INT_PRIORITY_SP
description "
This option selects the interupt priority for the
UART [set ::channel] interrupts."
}
}
}
cdl_component CYGDAT_IO_SERIAL_TTY_ADD_INL {
display "Freescale TTY devices beyond #3"
parent CYGPKG_IO_SERIAL
active_if CYGPKG_IO_SERIAL_TTY
flavor data
calculated { "<cyg/io/ser_freescale_uart_tty_add.inl>" }
cdl_component CYGPKG_IO_SERIAL_TTY_TTY4 {
display "TTY mode channel #4"
flavor bool
parent CYGPKG_IO_SERIAL_TTY
active_if CYGPKG_IO_SERIAL_TTY
default_value 0
description "
This option causes '/dev/tty4', which is provided by Freescale
UART, to be included in the standard drivers."
cdl_option CYGDAT_IO_SERIAL_TTY_TTY4_DEV {
display "TTY mode channel #4 device"
flavor data
default_value { "\"/dev/ser4\"" }
description "
This option selects the physical device to use for
'/dev/tty4'."
}
}
cdl_component CYGPKG_IO_SERIAL_TTY_TTY5 {
display "TTY mode channel #5"
flavor bool
parent CYGPKG_IO_SERIAL_TTY
active_if CYGPKG_IO_SERIAL_TTY
default_value 0
description "
This option causes '/dev/tty5', which is provided by Freescale
UART, to be included in the standard drivers."
cdl_option CYGDAT_IO_SERIAL_TTY_TTY5_DEV {
display "TTY mode channel #5 device"
flavor data
default_value { "\"/dev/ser5\"" }
description "
This option selects the physical device to use for
'/dev/tty5'."
}
}
}
cdl_component CYGDAT_IO_SERIAL_TERMIOS_ADD_INL {
display "Freescale TERMIOS devices beyond #3"
parent CYGPKG_IO_SERIAL
active_if CYGPKG_IO_SERIAL_TERMIOS
flavor data
calculated { "<cyg/io/ser_freescale_uart_termiostty_add.inl>" }
cdl_component CYGPKG_IO_SERIAL_TERMIOS_TERMIOS4 {
display "Termios TTY channel #4"
flavor bool
default_value 0
implements CYGINT_IO_SERIAL_TERMIOS_TERMIOS_TTY
parent CYGPKG_IO_SERIAL_TERMIOS
active_if CYGPKG_IO_SERIAL_TERMIOS
description "
This option causes '/dev/termios4' to be included in the
standard drivers."
cdl_option CYGDAT_IO_SERIAL_TERMIOS_TERMIOS4_DEV {
display "Termios TTY channel #4 device"
flavor data
default_value {"\"/dev/ser4\""}
description "
This option selects the physical device to use for
'/dev/termios4'."
}
}
cdl_component CYGPKG_IO_SERIAL_TERMIOS_TERMIOS5 {
display "Termios TTY channel #5"
flavor bool
default_value 0
implements CYGINT_IO_SERIAL_TERMIOS_TERMIOS_TTY
parent CYGPKG_IO_SERIAL_TERMIOS
active_if CYGPKG_IO_SERIAL_TERMIOS
description "
This option causes '/dev/termios5' to be included in the
standard drivers."
cdl_option CYGDAT_IO_SERIAL_TERMIOS_TERMIOS5_DEV {
display "Termios TTY channel #5 device"
flavor data
default_value {"\"/dev/ser5\""}
description "
This option selects the physical device to use for
'/dev/termios5'."
}
}
}
cdl_component CYGPKG_IO_SERIAL_FREESCALE_UART_OPTIONS {
display "Serial device driver build options"
flavor none
description "
Package specific build options including control over
compiler flags used only in building this package,
and details of which tests are built."
cdl_option CYGPKG_IO_SERIAL_FREESCALE_UART_CFLAGS_ADD {
display "Additional compiler flags"
flavor data
no_define
default_value { "" }
description "
This option modifies the set of compiler flags for
building these serial device drivers. These flags are
used in addition to the set of global flags."
}
cdl_option CYGPKG_IO_SERIAL_FREESCALE_UART_CFLAGS_REMOVE {
display "Suppressed compiler flags"
flavor data
no_define
default_value { "" }
description "
This option modifies the set of compiler flags for
building these serial device drivers. These flags are
removed from the set of global flags if present."
}
}
}
# EOF ser_freescale_uart.cdl
Go to most recent revision | Compare with Previous | Blame | View Log