URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [rtos/] [ecos-3.0/] [packages/] [devs/] [serial/] [m68k/] [mcf52xx/] [current/] [ChangeLog] - Rev 786
Compare with Previous | Blame | View Log
2008-11-17 Bart Veer <bartv@ecoscentric.com>
* cdl/ser_mcf52xx.cdl, doc/mcf52xx_ser.sgml, src/ser_mcf52xx.c:
minor clean-ups.
2008-05-26 Bart Veer <bartv@ecoscentric.com>
* src/ser_mcf52xx.c: provide more flow control capability
information to higher levels.
2006-09-25 Bart Veer <bartv@ecoscentric.com>
* doc/mcf52xx_ser.sgml: update docs to reflect changes in the
hal/m68k hierarchy.
* src/ser_mcf52xx.c: Motorola -> Freescale.
2006-09-08 Bart Veer <bartv@ecoscentric.com>
* src/ser_mcf52xx.c: update to use new var_io.h definitions.
2006-09-05 Bart Veer <bartv@ecoscentric.com>
* src/ser_mcf52xx.c, cdl/ser_mcf52xx.cdl:
Trigger off options/components in the processor HAL rather than
on interfaces in the device driver. The latter were essentially
duplicates of the former so no longer served a purpose.
2006-07-10 Bart Veer <bartv@ecoscentric.com>
* cdl/ser_mcf52xx.cdl, src/ser_mcf52xx.c: separate out RTS/CTS
handling. Cope with various changes in the mcf52xx variant HAL for
better support of the ColdFire range of processors.
2006-03-10 John Dallaway <jld@ecoscentric.com>
* cdl/ser_mcf52xx.cdl: Add reference to package documentation.
2004-08-03 John Dallaway <jld@ecoscentric.com>
* cdl/ser_mcf52xx.cdl: Use any port for serial testing.
2004-08-02 Bart Veer <bartv@ecoscentric.com>
* cdl/ser_mcf52xx.cdl, src/ser_mcf52xx.c, doc/mcf52xx_ser.sgml:
Make it easier for platform HALs to control what functionality is
enabled, e.g. whether or not RTS/CTS are connected.
2004-03-17 Bart Veer <bartv@ecoscentric.com>
* doc/mcf52xx_ser.sgml: update following port to mcf5282
2004-03-08 Bart Veer <bartv@ecoscentric.com>
* cdl/ser_mcf52xx.cdl: look for default ISR priorities supplied by
the HAL.
2004-02-11 Bart Veer <bartv@ecoscentric.com>
* src/ser_mcf52xx.c, cdl/ser_mcf52xx.cdl: add support for an
optional third UART.
2003-08-01 Bart Veer <bartv@ecoscentric.com>
* doc/mcf52xx_ser.sgml: Document use of rx fifo
* src/ser_mcf52xx.c:
Use rx fifo where available. Add some statistics gathering.
2003-07-22 Bart Veer <bartv@ecoscentric.com>
* doc/mcf52xx_ser.sgml: fix various typos etc.
2003-07-18 Bart Veer <bartv@ecoscentric.com>
* doc/mcf52xx_ser.sgml: Add documentation.
2003-07-10 Bart Veer <bartv@ecoscentric.com>
* src/ser_mcf52xx.c (mcf52xx_serial_set_config):
Reject DSR/DTR flow control more gracefully.
2003-07-08 Bart Veer <bartv@ecoscentric.com>
* cdl/ser_mcf52xx.cdl, src/ser_mcf52xx.c:
Add support for hardware handshaking.
Make better use of the fifos to reduce interrupts.
2003-06-04 Bart Veer <bartv@ecoscentric.com>
* New version of the M68K support
//===========================================================================
// ####GPLCOPYRIGHTBEGIN####
// -------------------------------------------
// This file is part of eCos, the Embedded Configurable Operating System.
// Copyright (C) 2003, 2004, 2006, 2008 Free Software Foundation, Inc.
//
// This program is free software; you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation; either version 2 or (at your option) any
// later version.
//
// This program is distributed in the hope that it will be useful, but
// WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
// General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program; if not, write to the
// Free Software Foundation, Inc., 51 Franklin Street,
// Fifth Floor, Boston, MA 02110-1301, USA.
// -------------------------------------------
// ####GPLCOPYRIGHTEND####
//===========================================================================