Subversion Repositories openrisc

2005-08-04  Andrew Lunn  <andrew.lunn@ascom.ch>
2005-05-02  Hajime Ishitani <pigmon@mail.snd.co.jp>

        * src/sh_scif_serial.c: support SH4 register access

2003-03-18  Gary Thomas  <gary@mlbassoc.com>

        * src/sh_scif_serial.c (sh_scif_set_config): 
        Flag for CYG_IO_SET_CONFIG_SERIAL_HW_RX_FLOW_THROTTLE is 32 bits.

2003-02-24  Jonathan Larmour  <jifl@eCosCentric.com>

        * cdl/ser_sh_scif.cdl: Remove irrelevant doc link.

2002-05-08  Jesper Skov  <jskov@redhat.com>

        * src/sh_scif_serial.c: Added SH2 support. Added break interrupt
        support. Added IrDA support. Added async RX/TX support. Added
        support for platforms to add config keys and handle flow
        control. Register renaming.

        * cdl/ser_sh_scif.cdl: Added async RX/TX and IRDA support. Also
        added interface for support of break interrupts.

2002-01-30  Jesper Skov  <jskov@redhat.com>

        * src/sh_scif_serial.c (sh3_scif_tx_DSR): Stop single-character
        transmit if transmitter gets disabled. This does not change the
        (output) semantics of the code, but does prevent it from looping
        over the full size of the FIFO calling the (inactive) xmt_char
        callback.

2001-02-27  Jesper Skov  <jskov@redhat.com>

        * src/sh_scif_serial.c (sh3_scif_er_DSR): Clear break flag.

2001-02-26  Jesper Skov  <jskov@redhat.com>

        * src/sh_scif_serial.c (sh3_scif_er_DSR): Enable interrupts on
        exit. Clear ER flag.

2000-10-23  Jesper Skov  <jskov@redhat.com>

        * src/sh_scif_serial.c: Include cyg_ass.h

2000-10-12  Jesper Skov  <jskov@redhat.com>

        * src/sh_scif_serial.c (sh3_scif_set_config): Changes to the flow
        control handling. Renamed DMA variables.

2000-10-12  Jonathan Larmour  <jlarmour@redhat.com>

        * src/sh_scif_serial.c: return -EINVAL when unsupported flow control
        mode requested.

2000-10-06  Jesper Skov  <jskov@redhat.com>

        * src/sh_scif_serial.c: Change to new block call syntax.
        Clean up start_xmit code. Do block transfers in serial DSRs.

2000-10-03  Jesper Skov  <jskov@redhat.co.uk>

        * src/sh_scif_serial.c: Fixed receive FIFO problem. Added Line
        Status handling. Don't enable TX interrupts in initialization.
        * src/sh_scif_serial.c: Added DMA support. Added RTS/CTS control.
        * cdl/ser_sh_scif.cdl: Added DMA interface.

2000-09-26  Jesper Skov  <jskov@redhat.com>

        * cdl/ser_sh_scif.cdl: Minor hack to allow both SCI and SCIF
        packages to be used at the same time.
        * src/sh_scif_serial.c: Same.

2000-09-25  Jesper Skov  <jskov@redhat.com>

        * src/sh_scif_serial.c: Use the SCI macros for baud rate
        calculation.

2000-09-05  Jesper Skov  <jskov@redhat.com>

        * src/sh_scif_serial.c: Moved to separate SCIF package.
        * ChangeLog: Cleaned out all non-SCIF related entries.

2000-08-01  Jonathan Larmour  <jlarmour@redhat.co.uk>

        * src/sh3_scif_serial.c (sh3_scif_set_config): Now use keys to make
        more flexible.

2000-06-22  Hugo Tyson  <hmt@cygnus.co.uk>

        * cdl/<yournamehere>.cdl: Remove the comment on the empty
        include_files directive; the tools now support this correctly.
        This keeps internal include files internal.

2000-04-11  Hugo Tyson  <hmt@cygnus.co.uk>

        * cdl/ser_sh_scif.cdl: Change the parent from CYGPKG_IO_SERIAL
        (which is enabled most of the time) to CYGPKG_IO_SERIAL_DEVICES
        (which is not...) thus allowing convenient control independent of
        platform.  Also enable all individual devices by default, now, so
        that they can be enabled simply by enabling the above new parent.

2000-04-11  Jesper Skov  <jskov@redhat.com>

        * src/sh3_scif_serial.c: Can't get input FIFO to work properly.
        Disabled for now.

2000-04-07  Hugo Tyson  <hmt@cygnus.co.uk>

        * ecos.db: Re-organize device packages.  This is a massive change
        involving deleting all the sources for serial and ethernet drivers
        from where they used to live in
            packages/io/serial/current/src/ARCH/PLATFORM.[ch]
            packages/net/drivers/eth/PLATFORM/current/src/...
        and reinstating them in
            packages/devs/serial/ARCH/PLATFORM/current/src/...
            packages/devs/eth/ARCH/PLATFORM/current/src/...

        All these new packages are properly defined in ecos.db, and are
        all of type "hardware" so that a "target" can grab them.
        
        This directory layout is descriptive of the devices we have right
        now, arch and platform are separate levels just to make it easier
        to navigate in the filesystem and similar to the HAL structure in
        the filesystem.

        It is *not* prescriptive of future work; for example, the mythical
        common highly-portable 16550 serial driver which works on many
        targets would be called "devs/serial/s16550/current", or a serial
        device for a particular board (cogent springs to mind) that can
        work with different CPUs fitted is "devs/serial/cogent/current".

        Changelogs have been preserved and replicated over all the new
        packages, so that no history is lost.

        The contents of individual source files are unchanged; they build
        in just the same emvironment except for a very few cases where the
        config file name changed in this movement.

        Targets in ecos.db have been redefined to bring in all relevant
        hardware packages including net and serial drivers (but the newly
        included packages are only active if their desired parent is
        available.)
        
        The names of CDL options (and their #defines of course) stay the
        same for the serial drivers, for backward compatibility.

        * templates/*/current.ect: these have had CYGPKG_IO_SERIAL added
        rather than it being in (almost) all target definitions.
        
2000-04-10  Jesper Skov  <jskov@redhat.com>

        * src/sh/sh3_scif_serial.c: 
        Working, but FIFO isn't enabled due to an interrupt problem.

2000-04-04  Jesper Skov  <jskov@redhat.com>

        * src/sh/sh3_scif_serial.c: FIFO related changes.

2000-04-03  Jesper Skov  <jskov@redhat.com>

        * cdl/ser_sh_scif.cdl: 
        * src/sh/sh_scif_serial.c:
        Added SCIF driver, based on SCI driver.

//===========================================================================
// ####GPLCOPYRIGHTBEGIN####                                                
// -------------------------------------------                              
// This file is part of eCos, the Embedded Configurable Operating System.   
// Copyright (C) 1998, 1999, 2000, 2001, 2002 Free Software Foundation, Inc.
//
// This program is free software; you can redistribute it and/or modify     
// it under the terms of the GNU General Public License as published by     
// the Free Software Foundation; either version 2 or (at your option) any   
// later version.                                                           
//
// This program is distributed in the hope that it will be useful, but      
// WITHOUT ANY WARRANTY; without even the implied warranty of               
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU        
// General Public License for more details.                                 
//
// You should have received a copy of the GNU General Public License        
// along with this program; if not, write to the                            
// Free Software Foundation, Inc., 51 Franklin Street,                      
// Fifth Floor, Boston, MA  02110-1301, USA.                                
// -------------------------------------------                              
// ####GPLCOPYRIGHTEND####                                                  
//===========================================================================