URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [rtos/] [ecos-3.0/] [packages/] [devs/] [spi/] [arm/] [at91/] [current/] [ChangeLog] - Rev 868
Go to most recent revision | Compare with Previous | Blame | View Log
2009-04-02 John Dallaway <john@dallaway.org.uk>
* cdl/spi_at91.cdl: Fix typographical error for
CYGINT_DEVS_SPI_ARM_AT91_HAS_BUS1. [ Bugzilla 1000737 ]
2009-02-16 Jonathan Larmour <jifl@eCosCentric.com>
* src/spi_at91.c (cyg_spi_at91_bus_init): Partially revert change of
2009-02-11. Define an empty CYGBLD_ATTRIB_C_INIT_PRI and rely on
spi_at91_init.cxx to call, in case the compiler does not supply
that macro (e.g. if too old).
* cdl/spi_at91.cdl: Revert change of 2009-02-11.
* src/spi_at91_init.cxx: Revive. Set priority to CYG_INIT_BUS_SPI.
Conditionalise on CYGBLD_ATTRIB_C_INIT_PRI.
2009-02-12 Nick Garnett <nickg@ecoscentric.com>
* cdl/spi_at91.cdl: Add a requires for CYGPKG_ERROR.
2009-02-11 Bart Veer <bartv@ecoscentric.com>
* src/spi_at91.c (cyg_spi_at91_bus_init): turn into a prioritized
constructor, make it a static and rename.
* cdl/spi_at91.cdl: remove src/spi_at91_init.cxx
* src/spi_at91_init.cxx: removed, no longer needed.
2008-10-19 Igor B. Poretsky <poretsky@mlbox.ru>
* src/spi_at91.c: Typo fixes from var_io.h. Correctly calculate
the board rate. Before it was two times too fast.
2006-09-27 Andrew Lunn <andrew.lunn@ascom.ch>
* src/spi_at91.c (spi_at91_transaction_begin): Don't use #ifdef
inside a macro invocation. The compiler throws a wobbly.
2006-09-07 John Eigelaar <jeigelaar@mweb.co.za>
* src/spi_at91.c: Fixed the chip select functions.
Changed the Mode Register setup as to disable the Mode Failure
Detaction for variants that support it. The Mode Failure Detection
breaks because NPCS0 is not connected, we are using GPIO, and is
thus floating.
2006-06-01 John Eigelaar <jeigelaar@mweb.co.za>
* src/spi_at91.c:
* cdl/spi_at91.cdl:
* include/spi_at91.h: Generalize so that multiple SPI
busses can be driven.
2006-05-19 Andrew Lunn <andrew.lunn@ascom.ch>
* src/spi_at91.c: Use the AT91 GPIO/PIO macros to aid
portability between different AT91 device.
2004-11-11 Sebastian Block <sebastianblock@gmx.net>
* src/spi_at91.c: Fixed negation of the chip select signal when
not using a 4 to 16 decoder
2004-10-13 Savin Zlobec <savin@elatec.si>
* src/spi_at91.c: Fixed a typo in spi_at91_transfer reported by
Nicolas Brouard.
2004-08-31 Savin Zlobec <savin@elatec.si>
* include/spi_at91.h:
* src/spi_at91.c:
Moved SPI registers and bits defines to HAL headers, added support
for 4 to 16 decoder of chip select signals, support for transfers
larger than 2^16 and per device configurable delay between two
transfers.
* cdl/spi_at91.cdl:
Added option to enable support for 4 to 16 decoder of chip select
signals.
2004-08-27 Savin Zlobec <savin@elatec.si>
* cdl/spi_at91.cdl:
* include/spi_at91.h:
* src/spi_at91.c:
* src/spi_at91_init.cxx:
Atmel AT91 SPI bus driver implementation.
//===========================================================================
// ####GPLCOPYRIGHTBEGIN####
// -------------------------------------------
// This file is part of eCos, the Embedded Configurable Operating System.
// Copyright (C) 1998, 1999, 2000, 2001, 2002, 2009 Free Software Foundation, Inc.
//
// This program is free software; you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation; either version 2 or (at your option) any
// later version.
//
// This program is distributed in the hope that it will be useful, but
// WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
// General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program; if not, write to the
// Free Software Foundation, Inc., 51 Franklin Street,
// Fifth Floor, Boston, MA 02110-1301, USA.
// -------------------------------------------
// ####GPLCOPYRIGHTEND####
//===========================================================================
Go to most recent revision | Compare with Previous | Blame | View Log