Subversion Repositories openrisc

# ====================================================================
#
#       usbs_d12.cdl
#
#       USB device driver for the Philips PDIUSBD12 Full Speed USB
#       peripheral chip.
#
# ====================================================================
## ####ECOSGPLCOPYRIGHTBEGIN####                                            
## -------------------------------------------                              
## This file is part of eCos, the Embedded Configurable Operating System.   
## Copyright (C) 2003, 2004, 2006 Free Software Foundation, Inc.            
##
## eCos is free software; you can redistribute it and/or modify it under    
## the terms of the GNU General Public License as published by the Free     
## Software Foundation; either version 2 or (at your option) any later      
## version.                                                                 
##
## eCos is distributed in the hope that it will be useful, but WITHOUT      
## ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or    
## FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License    
## for more details.                                                        
##
## You should have received a copy of the GNU General Public License        
## along with eCos; if not, write to the Free Software Foundation, Inc.,    
## 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.            
##
## As a special exception, if other files instantiate templates or use      
## macros or inline functions from this file, or you compile this file      
## and link it with other works to produce a work based on this file,       
## this file does not by itself cause the resulting work to be covered by   
## the GNU General Public License. However the source code for this file    
## must still be made available in accordance with section (3) of the GNU   
## General Public License v2.                                               
##
## This exception does not invalidate any other reasons why a work based    
## on this file might be covered by the GNU General Public License.         
## -------------------------------------------                              
## ####ECOSGPLCOPYRIGHTEND####                                              
# ====================================================================
######DESCRIPTIONBEGIN####
#
# Author(s):      Frank M. Pagliughi (fmp), SoRo Systems, Inc.
# Contributors:
# Date:           2004-05-24
#
#####DESCRIPTIONEND####
# ====================================================================

cdl_package CYGPKG_DEVS_USB_D12 {
    display     "Philips D12 USB Device Driver"
    include_dir "cyg/io/usb"
    parent      CYGPKG_USB
    implements  CYGHWR_IO_USB_SLAVE
    doc         ref/devs-usb-philips-pdiusbd12.html
        
    description "
        The Philips PDIUSBD12 is a USB peripheral controller (slave)
        chip that can connect to a microcontroller or microprocessor
        through an 8-bit parallel bus. The SoRo Systems USB-D12-104 is
        a slave board for the PC's ISA or PC/104 bus that contains a
        D12 chip placed in the PC's I/O space with jumpered selections
        for IRQ and DMA settings. This package provides an eCos device
        driver."
        
    requires      CYGIMP_DEVS_USB_D12_HW_ACCESS_HEADER

    cdl_option CYGIMP_DEVS_USB_D12_HW_ACCESS_HEADER {
        display       "Inline file implementing hardware access"
        flavor        booldata
        default_value false
        description   "
            This option should contain the header file which
            implements basic access to the D12 registers"
    }

    cdl_component CYGFUN_DEVS_USB_D12_EP0 {
         display       "Support the Control Endpoint 0"
         default_value CYGINT_IO_USB_SLAVE_CLIENTS
         requires      CYGPKG_IO_USB CYGPKG_IO_USB_SLAVE
         compile       usbs_d12.c
         compile       -library=libextras.a usbs_d12_data.cxx
         description "
             Enable support for endpoint 0. If this support is disabled
             then the entire USB port is unusable."
        
         cdl_option CYGVAR_DEVS_USB_D12_EP0_DEVTAB_ENTRY {
              display       "Provide a devtab entry for endpoint 0"
              default_value CYGGLO_IO_USB_SLAVE_PROVIDE_DEVTAB_ENTRIES
              requires      CYGPKG_IO
              description "
                  If endpoint 0 will only be accessed via the low-level
                  USB-specific calls then there is no need for an entry
                  in the device table, saving some memory. If the
                  application intends to access the endpoint by means
                  of open and ioctl calls then a devtab entry is needed.
                        "
         }
         cdl_option CYGNUM_DEVS_USB_D12_EP0_TXBUFSIZE {
              display       "Size of statically-allocated endpoint 0 transmit buffer"
              flavor        data
              default_value 256
              requires      { CYGNUM_DEVS_USB_D12_EP0_TXBUFSIZE >= 
                              CYGNUM_DEVS_USB_D12_EP0_PKTSIZE }
              description "
                  The implementation of the support for endpoint 0 uses
                  a single static buffer to hold the response to the
                  current control message. Typically this buffer can be
                  fairly small since replies to control messages tend to
                  be small: typically some tens of bytes for the enumeration
                  data, perhaps a bit more for unicode-encoded string
                  descriptors. However if some application-specific protocol
                  depends on larger control messages then this buffer
                  size may need to be increased."
              }
    }    

    cdl_option CYGNUM_DEVS_USB_D12_BASEADDR {
        display       "Base Address of D12 chip"
        flavor        data
        active_if     CYGFUN_DEVS_USB_D12_EP0
        description   "
            The base memory or I/O address where the USB chip resides.
            The value is set by the hardware specific driver's CDL."
    }

    cdl_option CYGNUM_DEVS_USB_D12_IRQ {
         display       "IRQ for the D12 chip"
         active_if     CYGFUN_DEVS_USB_D12_EP0
         flavor        data
         description   "
             The IRQ assigned to the D12 chip. The value 
             is set by the hardware specific drivers's CDL."
    }

    cdl_option CYGNUM_DEVS_USB_D12_INT {
         display       "INT for the D12 chip"
         active_if     CYGFUN_DEVS_USB_D12_EP0
         flavor        data
         default_value { CYGNUM_DEVS_USB_D12_IRQ + 32 }
         description "
             The interrupt vector assigned to the D12 chip."
        }

    cdl_component CYGPKG_DEVS_USB_D12_THREAD {
         display         "Use a thread to service D12 chip"
         active_if       CYGFUN_DEVS_USB_D12_EP0
         default_value   0
         description     "
             Services the D12 USB chip with a thread, rather than at
             the DSR level.  This allows for increased debug support,
             like TRACE output from the driver at the expense of some
             throughput & reaction time. The service thread MUST be at
             a higher priority than any application thread that uses
             the USB port.  "

         cdl_option CYGNUM_DEVS_USB_D12_THREAD_PRIORITY {
              display       "Thread Priority"
              flavor        data
              legal_values  1 to 30
              default_value 4
              description "
                  The priority of the D12 device driver thread."
         }

         cdl_option CYGNUM_DEVS_USB_D12_THREAD_STACK_SIZE {
              display         "USB Thread Stack Size"
              flavor          data
              default_value   4096
              description     "
                  The stack size for the D12 device driver thread."
         }
    }       

    cdl_component CYGFUN_DEVS_USB_D12_DEBUG {
         display       "Debug output from the D12 Device Driver"
         requires      CYGPKG_DEVS_USB_D12_THREAD
         default_value 0
         description "
             Provide debugging output from the D12 Device Driver"
                
         cdl_option CYGSEM_DEVS_USB_D12_DEBUG_DUMP_EP0_BUFS {
              display         "Dump the contents of EP0 buffers"
              flavor          bool
              default_value   0
              description "

                  Dump the contents of the packages going through
                  EP0. This allows you to see things like device
                  requests and responses."
         }

         cdl_option CYGSEM_DEVS_USB_D12_DEBUG_DUMP_BUFS {
              display         "Dump the contents of data buffers"
              flavor          bool
              default_value   0
              description "
                  Dump the contents of the packages going through the generic
                  endpoints. This allow you to see all of the data going through
                  the device."
         }
    }

    cdl_component CYGPKG_DEVS_USB_D12_TX_EP1 {
         display       "Endpoint 1 Interrupt IN, (tx_ep1)"
         implements    CYGHWR_IO_USB_SLAVE_IN_ENDPOINTS
         requires      CYGFUN_DEVS_USB_D12_EP0
         default_value CYGFUN_DEVS_USB_D12_EP0
         description "
             On the D12, Endpoint 1 IN can be used for Interrupt,
             Bulk, or Control packages. This driver currently only supports
             Interrupt packages on Endpoint 1 (slave -> host) transfers."
                
         cdl_option CYGVAR_DEVS_USB_D12_TX_EP1_DEVTAB_ENTRY {
             display       "Provide a devtab entry for Endpoint 1 IN"
             default_value CYGGLO_IO_USB_SLAVE_PROVIDE_DEVTAB_ENTRIES
             requires      CYGPKG_IO
             description "
                 If Endpoint 1 IN will only be accessed via the low-level
                 USB-specific calls then there is no need for an entry
                 in the device table, saving some memory. If the
                 application intends to access the endpoint by means
                 of open and write calls then a devtab entry is needed."
         }
    }

    cdl_component CYGPKG_DEVS_USB_D12_RX_EP1 {
        display       "Endpoint 1 Interrupt OUT, (rx_ep1)"
        implements    CYGHWR_IO_USB_SLAVE_OUT_ENDPOINTS
        requires      CYGFUN_DEVS_USB_D12_EP0
        default_value CYGFUN_DEVS_USB_D12_EP0
        description "
           In the D12, Endpoint 1 OUT can be used for Interrupt,
           Bulk, or Control packages. This driver currently only supports
           Interrupt packages on Endpoint 1 for (host -> slave) transfers" 
               
        cdl_option CYGVAR_DEVS_USB_D12_RX_EP1_DEVTAB_ENTRY {
             display       "Provide a devtab entry for Endpoint 1 OUT"
             default_value CYGGLO_IO_USB_SLAVE_PROVIDE_DEVTAB_ENTRIES
             requires      CYGPKG_IO
             description "
                 If Endpoint 1 OUT will only be accessed via the low-level
                 USB-specific calls then there is no need for an entry
                 in the device table, saving some memory. If the
                 application intends to access the endpoint by means
                 of open and write calls then a devtab entry is needed."
        }
    }

    cdl_component CYGPKG_DEVS_USB_D12_TX_EP2 {
         display                 "Endpoint 2 Bulk IN, (tx_ep2)"
         implements              CYGHWR_IO_USB_SLAVE_IN_ENDPOINTS
         requires                CYGFUN_DEVS_USB_D12_EP0
         default_value   CYGFUN_DEVS_USB_D12_EP0
         description "
             In the D12, Endpoint 2 IN can be used for Bulk, Interrupt,
             or Control packages. This driver currently only supports
             Bulk packages on Endpoint 2 for (slave -> host) transfers."
                
         cdl_option CYGVAR_DEVS_USB_D12_TX_EP2_DEVTAB_ENTRY {
             display       "Provide a devtab entry for Endpoint 2 IN"
             default_value CYGGLO_IO_USB_SLAVE_PROVIDE_DEVTAB_ENTRIES
             requires      CYGPKG_IO
             description "
                 If Endpoint 2 IN will only be accessed via the low-level
                 USB-specific calls then there is no need for an entry
                 in the device table, saving some memory. If the
                 application intends to access the endpoint by means
                 of open and write calls then a devtab entry is needed."
         }
    }

    cdl_component CYGPKG_DEVS_USB_D12_RX_EP2 {
         display       "Endpoint 2 Bulk OUT, (rx_ep2)"
         implements    CYGHWR_IO_USB_SLAVE_OUT_ENDPOINTS
         requires      CYGFUN_DEVS_USB_D12_EP0
         default_value CYGFUN_DEVS_USB_D12_EP0
         description "
             In the D12, Endpoint 2 OUT can be used for Bulk, Interrupt,
             Control packages. This driver currently only supports
             Bulk packages on Endpoint 2 for (host -> slave) transfers."
                
         cdl_option CYGVAR_DEVS_USB_D12_RX_EP2_DEVTAB_ENTRY {
              display       "Provide a devtab entry for Endpoint 2 OUT"
              default_value CYGGLO_IO_USB_SLAVE_PROVIDE_DEVTAB_ENTRIES
              requires      CYGPKG_IO
              description "
                  If Endpoint 2 OUT will only be accessed via the low-level
                  USB-specific calls then there is no need for an entry
                  in the device table, saving some memory. If the
                  application intends to access the endpoint by means
                  of open and write calls then a devtab entry is needed."
        }
    }

    cdl_option CYGDAT_DEVS_USB_D12_DEVTAB_BASENAME {
        display       "Base name for devtab entries"
        flavor        data
        active_if     { CYGVAR_DEVS_USB_D12_EP0_DEVTAB_ENTRY ||
                        CYGVAR_DEVS_USB_D12_TX_EP1_DEVTAB_ENTRY ||
                        CYGVAR_DEVS_USB_D12_RX_EP1_DEVTAB_ENTRY ||
                        CYGVAR_DEVS_USB_D12_TX_EP2_DEVTAB_ENTRY ||
                        CYGVAR_DEVS_USB_D12_RX_EP2_DEVTAB_ENTRY }
        default_value { "\"/dev/usbs\"" }
        description "
            If the D12 USB device driver package provides devtab entries
            for any of the endpoints then this option gives
            control over the names of these entries. By default the
            endpoints will be called \"/dev/usbs0c\", \"/dev/usbs1r\"
            \"/dev/usbs1w\", \"/dev/usbs2r\", \"/dev/usbs2w\"
            (assuming those endpoints are all enabled. The common
            part \"/dev/usbs\" is determined by this configuration
            option. It may be necessary to change this if there are
            multiple USB slave-side devices on the target hardware to
            prevent a name clash."
    }
}