OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [rtos/] [ecos-3.0/] [packages/] [ecos.db] - Rev 838

Go to most recent revision | Compare with Previous | Blame | View Log

#=============================================================================
#
#    ecos.db
#
#    This file is a temporary database for eCos package information.
#    It replaces the old packages and targets files, and will in turn
#    be subsumed by another file containing more inormation.
#
#=============================================================================
## ####ECOSGPLCOPYRIGHTBEGIN####                                            
## -------------------------------------------                              
## This file is part of eCos, the Embedded Configurable Operating System.   
## Copyright (C) 1998, 1999, 2000, 2001, 2002, 2004, 2005, 2008, 2009, 2010, 2011 Free Software Foundation, Inc.
##
## eCos is free software; you can redistribute it and/or modify it under    
## the terms of the GNU General Public License as published by the Free     
## Software Foundation; either version 2 or (at your option) any later      
## version.                                                                 
##
## eCos is distributed in the hope that it will be useful, but WITHOUT      
## ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or    
## FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License    
## for more details.                                                        
##
## You should have received a copy of the GNU General Public License        
## along with eCos; if not, write to the Free Software Foundation, Inc.,    
## 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.            
##
## As a special exception, if other files instantiate templates or use      
## macros or inline functions from this file, or you compile this file      
## and link it with other works to produce a work based on this file,       
## this file does not by itself cause the resulting work to be covered by   
## the GNU General Public License. However the source code for this file    
## must still be made available in accordance with section (3) of the GNU   
## General Public License v2.                                               
##
## This exception does not invalidate any other reasons why a work based    
## on this file might be covered by the GNU General Public License.         
## -------------------------------------------                              
## ####ECOSGPLCOPYRIGHTEND####                                              
#=============================================================================
######DESCRIPTIONBEGIN####
#
# Author(s):    bartv
# Date:         1999-06-13
#
# This file contains three lots of information. It details the packages
# in the component repository, the target boards supported by those
# packages, and a set of templates that can be used to instantiate
# configuration.
# 
#####DESCRIPTIONEND####
#===============================================================================

package CYGPKG_HAL {
        alias           { "eCos common HAL" hal hal_common }
        directory       hal/common
        script          hal.cdl
        description "
The eCos HAL package provide a porting layer for higher-level parts of
the system such as the kernel and the C library. Each installation
should have HAL packages for one or more architectures, and for each
architecture there may be one or more supported platforms. It is
necessary to select one target architecture and one platform for that
architecture. There are also a number of configuration options that
are common to all HAL packages."
}

package CYGPKG_INFRA {
        alias           { Infrastructure infra }
        directory       infra
        script          infra.cdl
        description "
Common types and useful macros.
Tracing and assertion facilities.
Package startup options." 
}

package CYGPKG_IO {
        alias           { "I/O sub-system" io }
        directory       io/common
        script          io.cdl
        description "
           The eCos system is supplied with a number of different
           device drivers.  This package contains the basic I/O system
           support which is the basis for all drivers."
}

package CYGPKG_IO_SERIAL {
        alias           { "Serial device drivers" serial io_serial }
        directory       io/serial
        script          io_serial.cdl
        description "
           This package contains drivers for basic I/O services on
           serial devices."
}

package CYGPKG_IO_CAN {
        alias           { "CAN device drivers" can io_can }
        directory       io/can
        script          io_can.cdl
        description "
           This package contains drivers for basic I/O services on
           CAN devices."
}

package CYGPKG_DEVS_CAN_MCF52xx_FLEXCAN {
    alias             { "MCF52xx FlexCAN device drivers"
                        devs_can_mcf52xx_flexcan mcf52xx_flexcan_serial_driver }
    hardware
    directory         devs/can/m68k/mcf52xx
    script                can_mcf52xx.cdl       
    description       "Generic CAN device driver for the on-chip
                       FlexCAN modules in MCF52xx ColdFire processors."
}

package CYGPKG_DEVS_CAN_AT91SAM7 {
    alias             { "AT91SAM7 CAN device drivers"
                        devs_can_at91sam7 at91sam7_can_driver }
    hardware
    directory         devs/can/arm/at91/at91sam7
    script                can_at91sam7.cdl      
    description       "Atmel AT91SAM7 on-chip CAN device driver."
}

package CYGPKG_DEVS_CAN_LPC2XXX {
    alias             { "LPC2xxx CAN device drivers"
                        devs_can_lpc2xxx lpc2xxx_can_driver }
    hardware
    directory         devs/can/arm/lpc2xxx
    script                can_lpc2xxx.cdl       
    description       "LPC2xxx on-chip CAN device driver."
}

package CYGPKG_DEVS_CAN_LOOP {
    alias             { "Loop CAN device drivers"
                        devs_can_loop loop_can_driver }
    directory         devs/can/loop
    script            can_loop.cdl      
    description       "Loopback CAN device driver."
}


package CYGPKG_IO_PCMCIA {
        alias           { "PCMCIA & Compact Flash support" pcmcia io_pcmcia cf }
        directory       io/pcmcia
        script          io_pcmcia.cdl
        description "
           This package contains basic card services support for PCMCIA
           and Compact Flash devices."
}

package CYGPKG_DEVS_PCMCIA_ASSABET {
        alias           { "SA11x0/Assabet PCMCIA & Compact Flash support" pcmcia_assabet assabet_pcmcia assabet_cf io_assabet_pcmcia}
        directory       devs/pcmcia/arm/assabet
        script          pcmcia_assabet.cdl
        hardware
        description "
           This package contains hardware support for PCMCIA
           and Compact Flash devices on the SA11x0/Assabet board."
}

package CYGPKG_DEVS_PCMCIA_CERF {
        alias           { "SA11x0/Cerf PCMCIA & Compact Flash support" pcmcia_cerf cerf_pcmcia cerf_cf io_cerf_pcmcia}
        directory       devs/pcmcia/arm/cerf
        script          pcmcia_cerf.cdl
        hardware
        description "
           This package contains hardware support for PCMCIA
           and Compact Flash devices on the SA11x0/Cerf board."
}

package CYGPKG_DEVS_PCMCIA_CERFPDA {
        alias           { "SA11x0/Cerfpda PCMCIA & Compact Flash support" pcmcia_cerfpda cerfpda_pcmcia cerfpda_cf io_cerfpda_pcmcia}
        directory       devs/pcmcia/arm/cerfpda
        script          pcmcia_cerfpda.cdl
        hardware
        description "
           This package contains hardware support for PCMCIA
           and Compact Flash devices on the SA11x0/Cerfpda."
}

package CYGPKG_DEVS_PCMCIA_IPAQ {
        alias           { "SA11x0/iPAQ PCMCIA & Compact Flash support" pcmcia_ipaq ipaq_pcmcia ipaq_cf io_ipaq_pcmcia}
        directory       devs/pcmcia/arm/ipaq
        script          pcmcia_ipaq.cdl
        hardware
        description "
           This package contains hardware support for PCMCIA
           and Compact Flash devices on the Compaq iPAQ pocket PC."
}

package CYGPKG_IO_FLASH {
        alias           { "Generic FLASH memory support" flash }
        directory       io/flash
        script          io_flash.cdl
        description "
           This package contains generic support for FLASH memory."
}

package CYGPKG_DEVS_FLASH_ARM_AAED2000 {
        alias           { "Support for flash memory on Agilent AAED2000 board" flash_aaed2000 }
        directory       devs/flash/arm/aaed2000
        script          flash_arm_aaed2000.cdl
        hardware
        description "
           This package contains hardware support for flash memory
           on the Agilent AAED2000 platform."
}

package CYGPKG_DEVS_FLASH_AMD_AM29XXXXX {
        alias           { "Support for AMD AM29xxxxx flash memory (deprecated)" flash_amd_am29xxxxx }
        directory       devs/flash/amd/am29xxxxx
        script          flash_amd_am29xxxxx.cdl
        hardware
        description "
           This package contains hardware support for AMD AM29xxxxx
           flash memory devices."
}

package CYGPKG_DEVS_FLASH_AMD_AM29XXXXX_V2 {
        alias           { "Support for AMD AM29xxxxx flash memory" flash_amd_am29xxxxx_v2 }
        directory       devs/flash/amd/am29xxxxxv2
        script          flash_am29xxxxx_v2.cdl
        hardware
        description "
           This package contains hardware support for AMD AM29xxxxx
           flash memory devices."
}

package CYGPKG_DEVS_FLASH_ATMEL_AT29CXXXX {
        alias           { "Support for Atmel AT29Cxxxx flash memory" flash_atmel_at29cxxxx }
        directory       devs/flash/atmel/at29cxxxx
        script          flash_atmel_at29cxxxx.cdl
        hardware
        description "
           This package contains hardware support for Atmel AT29Cxxxx
           flash memory devices."
}

package CYGPKG_DEVS_FLASH_ATMEL_AT49XXXX {
        alias           { "Support for Atmel AT49xxxx flash memory" flash_atmel_at49xxxx }
        directory       devs/flash/atmel/at49xxxx
        script          flash_atmel_at49xxxx.cdl
        hardware
        description "
           This package contains hardware support for Atmel AT49xxxx
           flash memory devices."
}

package CYGPKG_DEVS_FLASH_ATMEL_DATAFLASH {
    alias       { "Atmel DataFlash support" flash_dataflash dataflash }
    directory   devs/flash/atmel/dataflash
    script      devs_flash_atmel_dataflash.cdl
    hardware
    description "This package contains hardware support for Atmel DataFlash."
}

package CYGPKG_DEVS_FLASH_SPI_AT25DFXXX {
        alias           { "AT25DFxxx SPI Flash" flash_spi_at25dfxxx }
        directory       devs/flash/spi/at25dfxxx
        script          flash_at25dfxxx.cdl
        hardware
        description "
        Support for AT25DFxxx SPI flash devices from Atmel."
}

package CYGPKG_DEVS_FLASH_SPI_M25PXX {
        alias           { "M25Pxx SPI Flash" flash_spi_m25pxx }
        directory       devs/flash/spi/m25pxx
        script          flash_m25pxx.cdl
        hardware
        description "
        Support for M25Pxx SPI flash devices."
}

package CYGPKG_DEVS_FLASH_SPI_SST25XX {
        alias           { "SST25xx SPI Flash" flash_spi_sst25xx }
        directory       devs/flash/spi/sst25xx
        script          flash_sst25xx.cdl
        hardware
        description "
        Support for SST25xx SPI flash devices from Silicon Storage
        Technology."
}

package CYGPKG_DEVS_FLASH_SST25XX_FREESCALE_DSPI {
    alias         { "SST25XX FLASH over Freescale DSPI" }

    directory     devs/flash/freescale/dspi/sst25xx
    script        flash_sst25xx_freescale_dspi.cdl
    description   "
        This package provides a driver for SST25XX serial FLASH
        attached to a Freescale DSPI interfaces."
}

package CYGPKG_DEVS_FLASH_ARM_PID {
        alias           { "Support for flash memory on ARM/PID board" flash_arm_pid }
        directory       devs/flash/arm/pid
        script          flash_arm_pid.cdl
        hardware
        description "
           This package contains hardware support for flash memory
           on the ARM PID platform."
}

package CYGPKG_DEVS_FLASH_ARM_E7T {
    alias       { "FLASH memory support for the ARM Evaluator-7T" flash_e7t }
    directory   devs/flash/arm/e7t
    script      flash_e7t.cdl
    hardware
        description "
           This package contains hardware support for FLASH memory
       on the ARM Evaluator-7T platform."
}

package CYGPKG_DEVS_FLASH_EA2468 {
    alias       { "FLASH memory support for EA LPC2468 OEM board" flash_ea2468 }
    directory   devs/flash/arm/ea2468
    script      flash_ea2468.cdl
    hardware
        description "
           This package contains hardware support for FLASH memory
           on the Embedded Artists LCP2468 OEM board."
}

package CYGPKG_DEVS_FLASH_SH_EDK7708 {
        alias           { "Support for flash memory on Hitachi/EDK7708 board" flash_sh_edk7708 }
        directory       devs/flash/sh/edk7708
        script          flash_sh_edk7708.cdl
        hardware
        description "
           This package contains hardware support for flash memory
           on the Hitachi EDK7708 platform."
}

package CYGPKG_DEVS_FLASH_CQ7750 {
        alias           { "Support for flash memory on CqREEK SH7750 board" flash_cq7750 }
        directory       devs/flash/sh/cq7750
        script          flash_cq7750.cdl
        hardware
        description "
           This package contains hardware support for flash memory
           on the CqREEK SH7750 platform."
}

package CYGPKG_DEVS_FLASH_MIPS_OCELOT {
        alias           { "Support for flash memory on PMC-Sierra/Ocelot board" flash_qed_ocelot }
        directory       devs/flash/mips/ocelot
        script          flash_mips_ocelot.cdl
        hardware
        description "
           This package contains hardware support for flash memory
           on the PMC-Sierra Ocelot platform."
}

package CYGPKG_DEVS_FLASH_MIPS_VRC437X {
        alias           { "Support for flash memory on VRC437X boards" flash_vrc437x }
        directory       devs/flash/mips/vrc437x
        script          flash_mips_vrc437x.cdl
        hardware
        description "
           This package contains hardware support for flash memory
           on the VRC437X platform."
}

package CYGPKG_DEVS_FLASH_MIPS_REFIDT334 {
        alias           { "MIPS IDT 79RC32334 reference platform flash support" flash_refidt334 }
        directory       devs/flash/mips/idt79s334a
        script          flash_mips_refidt334.cdl
        hardware
        description "
           This package contains hardware support for flash memory
           on the IDT MIPS 334a reference platform."
}

package CYGPKG_DEVS_FLASH_SH_HS7729PCI {
        alias           { "Hitachi SH/HS7729PCI FLASH memory support" flash_hs7729pci }
        directory       devs/flash/sh/hs7729pci
        script          flash_sh_hs7729pci.cdl
        hardware
        description "
           This package contains hardware support for FLASH memory
           on the Hitachi/HS7729PCI platform."
}

package CYGPKG_DEVS_FLASH_SH_SE77X9 {
        alias           { "Hitachi SH/SE77X9 FLASH memory support" flash_se77x9 }
        directory       devs/flash/sh/se77x9
        script          flash_sh_se77x9.cdl
        hardware
        description "
           This package contains hardware support for FLASH memory
           on the Hitachi/SE77X9 platform."
}

package CYGPKG_DEVS_FLASH_SH_SE7751 {
        alias           { "Hitachi SH/SE7751 FLASH memory support" flash_se7751 }
        directory       devs/flash/sh/se7751
        script          flash_sh_se7751.cdl
        hardware
        description "
           This package contains hardware support for FLASH memory
           on the Hitachi/SE7751 platform."
}

package CYGPKG_DEVS_FLASH_SH_MICRODEV {
        alias           { "SuperH SH4-202 MicroDev CPU board FLASH memory support" flash_microdev }
        directory       devs/flash/sh/microdev
        script          flash_microdev.cdl
        hardware
        description "
           This package contains hardware support for FLASH memory
           on the SuperH SH4-202 MicroDev CPU board platform."
}

package CYGPKG_DEVS_FLASH_EBSA285 {
        alias           { "FLASH memory support for StrongARM EBSA-285" flash_ebsa285 }
        directory       devs/flash/arm/ebsa285
        script          flash_ebsa285.cdl
        hardware
        description "
           This package contains hardware support for FLASH memory
           on the StrongARM EBSA-285 platform."
}

package CYGPKG_DEVS_FLASH_SA1100MM {
        alias           { "FLASH memory support for StrongARM SA1100 Multimedia" flash_sa1100mm }
        directory       devs/flash/arm/sa1100mm
        script          flash_sa1100mm.cdl
        hardware
        description "
           This package contains hardware support for FLASH memory
           on the StrongARM SA1100 Multimedia platform."
}

package CYGPKG_DEVS_FLASH_EDB7XXX {
        alias           { "FLASH support for Cirrus Logic EP7xxx based boards" flash_edb7xxx }
        directory       devs/flash/arm/edb7xxx
        script          flash_edb7xxx.cdl
        hardware
        description "
           This package contains hardware support for FLASH memory
           on the Cirrus Logic EP7xxx based platform(s)."
}

package CYGPKG_DEVS_FLASH_AT91 {
        alias           { "FLASH memory support for Atmel AT91 EFC" flash_at91 }
        directory       devs/flash/arm/at91
        script          flash_at91.cdl
        hardware
        description "
           This package contains hardware support for Embedded FLASH 
           controller as found in the AT91SAM7S platform"
}

package CYGPKG_DEVS_FLASH_EB40 {
        alias           { "FLASH memory support for Atmel AT91/EB40" flash_eb40 }
        directory       devs/flash/arm/eb40
        script          flash_eb40.cdl
        hardware
        description "
           This package contains hardware support for FLASH memory
           on the Atmel AT91/EB40 platform(s)."
}

package CYGPKG_DEVS_FLASH_EB40A {
        alias           { "FLASH memory support for Atmel AT91/EB40A" flash_eb40a }
        directory       devs/flash/arm/eb40a
        script          flash_eb40a.cdl
        hardware
        description "
           This package contains hardware support for FLASH memory
           on the Atmel AT91/EB40A platform(s)."
}

package CYGPKG_DEVS_FLASH_EB42 {
        alias           { "FLASH memory support for Atmel AT91/EB42" flash_eb42 }
        directory       devs/flash/arm/eb42
        script          flash_eb42.cdl
        hardware
        description "
           This package contains hardware support for FLASH memory
           on the Atmel AT91/EB42 platform(s)."
}

package CYGPKG_DEVS_FLASH_EB55 {
        alias           { "FLASH memory support for Atmel AT91/EB55" flash_eb55 }
        directory       devs/flash/arm/eb55
        script          flash_eb55.cdl
        hardware
        description "
           This package contains hardware support for FLASH memory
           on the Atmel AT91/EB55 platform(s)."
}

package CYGPKG_DEVS_FLASH_JTST {
        alias           { "FLASH memory support for Atmel JTST" flash_jtst }
        directory       devs/flash/arm/jtst
        script          flash_jtst.cdl
        hardware
        description "
           This package contains hardware support for FLASH memory
           on the Atmel JTST platform(s)."
}

package CYGPKG_DEVS_FLASH_PHYCORE {
        alias           { "FLASH memory support for PHYTEC phyCORE AT91M55800A" flash_phycore }
        directory       devs/flash/arm/phycore
        script          flash_phycore.cdl
        hardware
        description "
           This package contains hardware support for FLASH memory
           on the PHYTEC phyCORE AT91M55800A platform(s)."
}

package CYGPKG_DEVS_FLASH_PHYCORE229X {
        alias           { "FLASH memory support for Phytec phyCORE-LPC229x" flash_phycore229x }
        directory       devs/flash/arm/phycore229x
        script          flash_phycore229x.cdl
        hardware
        description "
           This package contains hardware support for FLASH memory
           on the Phytec phyCORE-LPC229x platform(s)."
}

package CYGPKG_DEVS_FLASH_ASSABET {
        alias           { "FLASH memory support for Intel SA1110 (Assabet)" flash_assabet }
        directory       devs/flash/arm/assabet
        script          flash_assabet.cdl
        hardware
        description "
           This package contains hardware support for FLASH memory
           on the Intel StrongARM SA-1110 Assabet platform."
}

package CYGPKG_DEVS_FLASH_CERF {
        alias           { "FLASH memory support for Intrinsyc SA1110 (Cerf)" flash_cerf }
        directory       devs/flash/arm/cerf
        script          flash_cerf.cdl
        hardware
        description "
           This package contains hardware support for FLASH memory
           on the Intrinsyc SA1110 Cerf board."
}

package CYGPKG_DEVS_FLASH_CERFPDA {
        alias           { "FLASH memory support for Intrinsyc SA1110 (Cerfpda)" flash_cerfpda }
        directory       devs/flash/arm/cerfpda
        script          flash_cerfpda.cdl
        hardware
        description "
           This package contains hardware support for FLASH memory
           on the Intrinsyc SA1110 Cerfpda."
}

package CYGPKG_DEVS_FLASH_IPAQ {
        alias           { "FLASH memory support for Intel SA1110 (Ipaq)" flash_ipaq }
        directory       devs/flash/arm/ipaq
        script          flash_ipaq.cdl
        hardware
        description "
           This package contains hardware support for FLASH memory
           on the Intel StrongARM SA-1110 iPAQ platform."
}

package CYGPKG_DEVS_FLASH_FLEXANET {
      alias           { "FLASH memory support for Flexanet" flash_flexanet }
      directory       devs/flash/arm/flexanet
      script          flash_flexanet.cdl
      hardware
        description "
           This package contains hardware support for FLASH memory
           on the SA-1100 Flexanet platform."
}

package CYGPKG_DEVS_FLASH_MPC50 {
        alias           { "FLASH memory support for MPC 5.0" flash_mpc50 }
        directory       devs/flash/arm/mpc50
        script          flash_mpc50.cdl
        hardware
        description "
           This package contains hardware support for FLASH memory
           on the MPC 5.0."
}

package CYGPKG_DEVS_FLASH_MALTA {
        alias           { "FLASH memory support for MIPS Malta board" flash_malta }
        directory       devs/flash/mips/malta
        script          flash_malta.cdl
        hardware
        description "
           This package contains hardware support for FLASH memory
           on the MIPS Malta platform."
}

package CYGPKG_DEVS_FLASH_ARM_EXCALIBUR {
        alias           { "FLASH memory support for Altera ARM9/Excalibur board" flash_excalibur }
        directory       devs/flash/arm/excalibur
        script          flash_excalibur.cdl
        hardware
        description "
           This package contains hardware support for FLASH memory
           on the Altera Excalibur platform."
}

package CYGPKG_DEVS_FLASH_ARM_SMDK2410 {
        alias           { "FLASH memory support for Samsung ARM9/SMDK2410 board" flash_smdk2410 }
        directory       devs/flash/arm/smdk2410
        script          flash_smdk2410.cdl
        hardware
        description "
           This package contains hardware support for FLASH memory
           on the Samsung smdk2410 platform."
}

package CYGPKG_DEVS_FLASH_ARM_INNOVATOR {
        alias           { "FLASH memory support for the Innovator" flash_innovator }
        directory       devs/flash/arm/innovator
        script          flash_innovator.cdl
        hardware
        description "
           This package contains hardware support for FLASH memory
           on the Innovator platform."
}

package CYGPKG_DEVS_FLASH_ARM_AIM711 {
        alias           { "Support for flash memory on AIM 711 board" flash_arm_snds }
        directory       devs/flash/arm/aim711
        script          flash_arm_aim711.cdl
        hardware
        description "
           This package contains hardware support for flash memory
           on the ARM Industrial Module AIM 711 platform."
}

package CYGPKG_DEVS_FLASH_NANO {
        alias           { "FLASH memory support for Intel SA1110 nanoEngine" flash_nano }
        directory       devs/flash/arm/nano
        script          flash_nano.cdl
        hardware
        description "
           This package contains hardware support for FLASH memory
           on the StrongARM SA-1110 nanoEngine platform."
}

package CYGPKG_DEVS_FLASH_STRATA {
        alias           { "Generic FLASH memory support for Intel StrataFLASH (deprecated)" strata }
        directory       devs/flash/intel/strata
        script          flash_strata.cdl
        hardware
        description "
           This package contains generic hardware support for Intel
           StrataFLASH memory devices."
}

package CYGPKG_DEVS_FLASH_STRATA_V2 {
        alias           { "Generic FLASH memory support for Intel StrataFLASH" strata_v2 }
        directory       devs/flash/intel/stratav2
        script          flash_strata_v2.cdl
        hardware
        description "
           This package contains generic hardware support for Intel
           StrataFLASH memory devices using the V2 device API."
}

package CYGPKG_DEVS_FLASH_SST_39VFXXX {
    alias       { "Support for SST 39VFXXX flash memory" flash_sst_39vfXXX }
    directory   devs/flash/sst/39vfxxx
    script      flash_sst_39vfxxx.cdl
    hardware
        description "
           This package contains hardware support for SST 39VFxxx
           flash memory devices. Until now it supports SST 39VF080,
           39VF016 and 39VF400 devices."
}

package CYGPKG_DEVS_FLASH_INTEL_28FXXX {
        alias           { "Generic FLASH memory support for Intel 28Fxxx Flash parts" flashfile }
        directory       devs/flash/intel/28fxxx
        script          flash_intel_28fxxx.cdl
        hardware
        description "
           This package contains generic hardware support for Intel
           Flash memory devices."
}

package CYGPKG_DEVS_FLASH_ARM_XSCALE_IQ80310 {
        alias           { "FLASH memory support for Cyclone IQ80310" flash_iq80310 }
        directory       devs/flash/arm/iq80310
        script          flash_iq80310.cdl
        hardware
        description "
           This package contains hardware support for FLASH memory
           on the Cyclone IQ80310 platform."
}

package CYGPKG_DEVS_FLASH_IQ80321 {
        alias           { "FLASH memory support for IQ80321" flash_iq80321 }
        directory       devs/flash/arm/iq80321
        script          flash_iq80321.cdl
        hardware
        description "
           This package contains hardware support for FLASH memory
           on the IQ80321 platform."
}

package CYGPKG_DEVS_FLASH_IXDP425 {
        alias           { "FLASH memory support for IXDP425" flash_ixdp425 }
        directory       devs/flash/arm/ixdp425
        script          flash_ixdp425.cdl
        hardware
        description "
           This package contains hardware support for FLASH memory
           on the IXDP425 platform."
}

package CYGPKG_DEVS_FLASH_XSENGINE {
       alias           { "FLASH memory support for XSEngine" flash_xsengine }
       directory       devs/flash/arm/xsengine
       script          flash_xsengine.cdl
       hardware
       description "
          This package contains hardware support for FLASH memory
          on the XSEngine platform."
}

package CYGPKG_DEVS_FLASH_GRG {
        alias           { "FLASH memory support for GRG" flash_grg }
        directory       devs/flash/arm/grg
        script          flash_grg.cdl
        hardware
        description "
           This package contains hardware support for FLASH memory
           on the Intel Generic Residential Gateway platform."
}

package CYGPKG_DEVS_FLASH_PRPMC1100 {
        alias           { "FLASH memory support for PrPMC1100" flash_prpmc1100 }
        directory       devs/flash/arm/prpmc1100
        script          flash_prpmc1100.cdl
        hardware
        description "
           This package contains hardware support for FLASH memory
           on the Motorola PrPMC1100 platform."
}

package CYGPKG_DEVS_FLASH_ARM_INTEGRATOR {
        alias           { "FLASH memory support for ARM INTEGRATOR" flash_integrator }
        directory       devs/flash/arm/integrator
        script          flash_integrator.cdl
        hardware
        description "
           This package contains hardware support for FLASH memory
           on the ARM INTEGRATOR platform."
}

package CYGPKG_DEVS_FLASH_MBX {
        alias           { "FLASH memory support for Motorola PowerPC/860 MBX" flash_mbx }
        directory       devs/flash/powerpc/mbx
        script          flash_mbx.cdl
        hardware
        description "
           This package contains hardware support for FLASH memory
           on the Motorola PowerPC/860 MBX platform."
}

package CYGPKG_DEVS_FLASH_TS6 {
        alias           { "FLASH memory support for Delphi Communication Systems, Inc. TigerSHARC6 Board" flash_ts6 }
        directory       devs/flash/powerpc/ts6
        script          flash_ts6.cdl
        hardware
        description "
           This package contains hardware support for FLASH memory
           on the Delphi Communication Systems TigerSHARC6 platform."
}

package CYGPKG_DEVS_FLASH_VADS {
        alias           { "FLASH memory support for Motorola MPC8260 Voyager ADS board" flash_vads }
        directory       devs/flash/powerpc/vads
        script          flash_vads.cdl
        hardware
        description "
           This package contains hardware support for FLASH memory
           on the Motorola MPC8260 Voyager ADS platform."
}

package CYGPKG_DEVS_FLASH_CME555 {
        alias           { "FLASH memory support for Axiom's CME555" flash_cme555 }
        directory       devs/flash/powerpc/cme555
        script          flash_cme555.cdl
        hardware
        description "
           This package contains hardware support for FLASH memory
           on Axiom's CME555 board."
}

package CYGPKG_DEVS_FLASH_EC555 {
        alias           { "FLASH memory support for ec555 board" flash_ec555 }
        directory       devs/flash/powerpc/ec555
        script          flash_ec555.cdl
        hardware
        description "
           This package contains hardware support for FLASH memory
           on the ec555 board."
}

package CYGPKG_DEVS_FLASH_PATI {
       alias           { "FLASH memory support for PowerPC PATI board" flash_pati }
       directory       devs/flash/powerpc/pati
       script          flash_pati.cdl
       hardware
        description "
           This package contains hardware support for FLASH memory
           on the PowerPC PATI platform."
}

package CYGPKG_DEVS_FLASH_VIPER {
        alias           { "FLASH memory support for A&M Viper PowerPC/8xx" flash_viper }
        directory       devs/flash/powerpc/viper
        script          flash_viper.cdl
        hardware
        description "
           This package contains hardware support for FLASH memory
           on the A&M PowerPC/8xx VIPER platform."
}

package CYGPKG_DEVS_FLASH_MN10300_STB {
        alias           { "FLASH memory support for Matsushita MN10300 STB" flash_stb }
        directory       devs/flash/mn10300/stb
        script          flash_stb.cdl
        hardware
        description "
           This package contains hardware support for FLASH memory
           on the Matsushita MN10300 STB platform (SRAM2 socket)."
}

package CYGPKG_DEVS_FLASH_MN10300_ASB2303 {
        alias           { "FLASH memory support for Matsushita ASB2303" flash_asb2303 }
        directory       devs/flash/mn10300/asb2303
        script          flash_asb2303.cdl
        hardware
        description "
           This package contains hardware support for FLASH memory
           on the Matsushita MN10300 ASB2303 platform (system flash socket)."
}

package CYGPKG_DEVS_FLASH_MN10300_ASB2305 {
        alias           { "FLASH memory support for Matsushita ASB2305" flash_asb2305 }
        directory       devs/flash/mn10300/asb2305
        script          flash_asb2305.cdl
        hardware
        description "
           This package contains hardware support for FLASH memory
           on the Matsushita MN10300 ASB2305 platform (system flash socket)."
}

package CYGPKG_DEVS_FLASH_ATLAS {
        alias           { "FLASH memory support for MIPS Atlas" flash_atlas }
        directory       devs/flash/mips/atlas
        script          flash_atlas.cdl
        hardware
        description "
           This package contains hardware support for FLASH memory
           on the MIPS Atlas platform."
}
package CYGPKG_DEVS_FLASH_SYNTH {
    alias               { "Synthetic FLASH memory support (legacy)" synth_flash flash_synth }
    directory           devs/flash/synth
    script              flash_synth.cdl
    hardware
    description   "
        FLASH memory device support for Synthetic target"
}

package CYGPKG_DEVS_FLASH_SYNTH_V2 {
    alias               { "Synthetic FLASH memory support" synth_flashv2 flash_synthv2 }
    directory           devs/flash/synthv2
    script              flash_synth.cdl
    hardware
    description   "
        FLASH memory device support for Synthetic target using the new API"
}

package CYGPKG_DEVS_FLASH_TOSHIBA_TC58XXX {
        alias           { "Support for Toshiba TC58xxx flash memory" flash_toshiba_tc58xxx }
        directory       devs/flash/toshiba/tc58xxx
        script          flash_toshiba_tc58xxx.cdl
        hardware
        description "
           This package contains hardware support for Toshiba TC58xxx
           NAND flash memory devices."
}

package CYGPKG_DEVS_FLASH_FRV_FRV400 {
        alias           { "Fujitsu FRV400 FLASH memory support" flash_frv400 }
        directory       devs/flash/frv/frv400
        script          flash_frv_frv400.cdl
        hardware
        description "
           This package contains hardware support for FLASH memory
           on the Fujitsu FRV400 platform."
}

package CYGPKG_DEVS_FLASH_FRV_PDK403 {
        alias           { "Fujitsu MB93093 FLASH memory support" flash_mb93093 }
        directory       devs/flash/frv/pdk403
        script          flash_frv_pdk403.cdl
        hardware
        description "
           This package contains hardware support for FLASH memory
           on the Fujitsu MB93093-PD00 Portable Development Kit."
}

package CYGPKG_DEVS_FLASH_ARM_LPC2XXX {
        alias           { "Support for the internal flash memory of LPC2xxx devices" flash_arm_lpc2xxx }
        directory       devs/flash/arm/lpc2xxx
        script          flash_arm_lpc2xxx.cdl
        hardware
        description     "
           This package contains hardware support for the internal
           flash memory of the LPC2xxx devices."
}

package CYGPKG_DEVS_FLASH_ARM_OLPCX2294 {
        alias           { "Support for Flash memory on Olimex LPC-E2294, LPC-H2294, LPC-L2294-1M boards" flash_olpcx2294 }
        directory       devs/flash/arm/olpcx2294
        script          flash_olpcx2294.cdl
        hardware
        description "
        This package contains hardware support for flash memory parts
        on the Olimex LPC-E2294, LPC-H2294 LPC-L2294-1M platforms."

}

package CYGPKG_DEVS_FLASH_ARM_OLPCX2294_V2 {
        alias           { "External Flash memory support for OLPCE2294, OLPCH2294, OLPCL2294" flash_olpcx2294_v2 }
        directory       devs/flash/arm/olpcx2294v2
        script          flash_olpcx2294.cdl
        hardware
        description "
            The flash_olpcx2294_v2 provides hardware support for external
            flash memory parts on the Olimex LPC-E2294, LPC-H2294,
            and LPC-L2294-1M boards. It uses eCos Flash v2 API."
}

package CYGPKG_DEVS_RAM_MICRON_CELLULARRAM {
        alias           { "Micron CellularRam 1.5 support" }
        directory       hal/misc/ram/micron/cellularram
        script          ram_micron_cellularram.cdl
        hardware
        description "
           This package contains hardware support for Micron
           CellularRam memory devices."
}

package CYGPKG_DEVS_TOUCH_IPAQ {
        alias           { "Touch screen support for iPAQ" touch_ipaq }
        directory       devs/touch/arm/ipaq
        script          touch_ipaq.cdl
        hardware
        description "
           This package contains hardware support for the touch screen
           on the Compaq iPAQ Pocket PC."
}

package CYGPKG_DEVS_KBD_IPAQ {
        alias           { "Keypad/button support for iPAQ" kbd_ipaq }
        directory       devs/kbd/arm/ipaq
        script          kbd_ipaq.cdl
        hardware
        description "
           This package contains hardware support for the keyboard buttons
           on the Compaq iPAQ Pocket PC."
}

package CYGPKG_DEVS_TOUCH_AAED2000 {
        alias           { "Touch screen support for Agilent AAED2000" touch_aaed2000 }
        directory       devs/touch/arm/aaed2000
        script          touch_aaed2000.cdl
        hardware
        description "
           This package contains hardware support for the touch screen
           on the Agilent AAED2000 prototype."
}

package CYGPKG_DEVS_KBD_AAED2000 {
        alias           { "Keyboard support for Agilent AAED2000" kbd_aaed2000 }
        directory       devs/kbd/arm/aaed2000
        script          kbd_aaed2000.cdl
        hardware
        description "
           This package contains hardware support for the keyboard
           on the Agilent AAED2000 prototype."
}

package CYGPKG_IO_SERIAL_ARM_EBSA285 {
    alias             { "Intel EBSA285 serial driver"
                        devs_serial_arm_ebsa285 ebsa285_serial_driver }
    hardware
    directory         devs/serial/arm/ebsa285
    script            ser_arm_ebsa285.cdl       
    description       "Intel StrongARM/EBSA285 serial device drivers"
}

package CYGPKG_IO_SERIAL_ARM_XSCALE_PXA2X0 {
    alias         { "Intel XScale PXA2X0 serial driver"
                        devs_serial_arm_xscale_pxa pxa_serial_driver }
    hardware
    directory        devs/serial/arm/pxa2x0
    script        ser_arm_xscale_pxa2x0.cdl
    description       "Intel XScale/PXA2X0 serial device drivers"
}


package CYGPKG_IO_SERIAL_ARM_XSCALE_IOP310 {
    alias             { "Intel XScale IOP310 serial driver"
                        devs_serial_arm_iop310 iop310_serial_driver }
    hardware
    directory         devs/serial/arm/iop310
    script            ser_arm_iop310.cdl        
    description       "Intel XScale IOP310 serial device drivers"
}

package CYGPKG_IO_SERIAL_ARM_IQ80321 {
    alias             { "Intel XScale IQ80321 serial driver"
                        devs_serial_arm_iq80321 iq80321_serial_driver }
    hardware
    directory         devs/serial/arm/iq80321
    script            ser_arm_iq80321.cdl       
    description       "Intel XScale/IQ80321 serial device drivers"
}

package CYGPKG_IO_SERIAL_ARM_SA11X0 {
    alias             { "Intel StrongARM SA11x0 serial driver"
                        devs_serial_arm_sa11x0 sa11x0_serial_driver }
    hardware
    directory         devs/serial/arm/sa11x0
    script            ser_arm_sa11x0.cdl        
    description       "Intel StrongARM/SA11x0 serial device drivers"
}

package CYGPKG_IO_SERIAL_ARM_PID {
    alias             { "ARM PID serial device drivers"
                        devs_serial_arm_pid pid_serial_driver }
    hardware
    directory         devs/serial/arm/pid
    script            ser_arm_pid.cdl   
    description       "ARM PID serial device drivers"
}

package CYGPKG_IO_SERIAL_ARM_CERFPDA {
    alias             { "Cerfpda 16x5x serial device drivers"
                        devs_serial_arm_cerfpda cerfpda_serial_driver }
    hardware
    directory         devs/serial/arm/cerfpda
    script            ser_arm_cerfpda.cdl       
    description       "Cerfpda serial device drivers"
}

package CYGPKG_IO_SERIAL_ARM_AEB {
    alias             { "ARM AEB-1 serial device drivers"
                        devs_serial_arm_aeb aeb_serial_driver }
    hardware
    directory         devs/serial/arm/aeb
    script            ser_arm_aeb.cdl   
    description       "ARM AEB-1 serial device drivers"
}

package CYGPKG_IO_SERIAL_ARM_AAED2000 {
    alias             { "Agilent AAED2000 serial device drivers"
                        devs_serial_arm_aaed2000 aaed2000_serial_driver }
    hardware
    directory         devs/serial/arm/aaed2000
    script            ser_arm_aaed2000.cdl
    description       "Agilent AAED2000 serial device drivers"
}

package CYGPKG_IO_SERIAL_ARM_SMDK2410 {
    alias             { "Samsung ARM9/SMDK2410 board serial device drivers"
                        devs_serial_arm_smdk2410 smdk2410_serial_driver }
    hardware
    directory         devs/serial/arm/smdk2410
    script            ser_arm_smdk2410.cdl        
    description       "Samsung ARM9/SMDK2410 board serial device drivers"
}

package CYGPKG_IO_SERIAL_ARM_EDB7XXX {
    alias             { "Cirrus Logic ARM based board serial device drivers"
                        devs_serial_arm_edb7xxx edb7xxx_serial_driver }
    hardware
    directory         devs/serial/arm/edb7xxx
    script            ser_arm_edb7xxx.cdl       
    description       "Cirrus Logic ARM based development board serial
                       device drivers"
}

package CYGPKG_IO_SERIAL_ARM_CMA230 {
    alias             { "Cogent ARM/CMA230 serial device drivers"
                        devs_serial_arm_cma230 cma230_serial_driver }
    hardware
    directory         devs/serial/arm/cma230
    script            ser_arm_cma230.cdl        
    description       "Cogent ARM/CMA230 serial device drivers"
}

package CYGPKG_IO_SERIAL_ARM_E7T {
    alias             { "ARM AEB-2 (E7T) serial device drivers"
                        devs_serial_arm_e7t e7t_serial_driver }
    hardware
    directory         devs/serial/arm/e7t
    script            ser_arm_e7t.cdl   
    description       "ARM AEB-2 (E7T) serial device drivers"
}

package CYGPKG_IO_SERIAL_ARM_S3C4510 {
    alias             { "Generig ARM S3C4510 serial device driver"
                        devs_serial_arm_s3c4510 s3c4510_serial_driver }
    hardware
    directory         devs/serial/arm/s3c4510
    script            ser_arm_s3c4510.cdl
    description       "Generic serial device driver for the internal
                       serial interface of the S3C4510"
}

package CYGPKG_IO_SERIAL_ARM_AIM711 {
    alias             { "AIM 711 serial device drivers"
                        devs_serial_arm_aim711 aim711_serial_driver }
    hardware
    directory         devs/serial/arm/aim711
    script            ser_arm_aim711.cdl
    description       "ARM Industral Module AIM 711 serial device drivers"
}

package CYGPKG_IO_SERIAL_ARM_INTEGRATOR {
    alias             { "ARM INTEGRATOR serial device drivers"
                        devs_serial_arm_integrator integrator_serial_driver }
    hardware
    directory         devs/serial/arm/integrator
    script            ser_arm_integrator.cdl    
    description       "ARM INTEGRATOR serial device drivers"
}

package CYGPKG_IO_SERIAL_ARM_AT91 {
    alias             { "Atmel AT91 serial device driver"
                        devs_serial_arm_at91 at91_serial_driver }
    hardware
    directory         devs/serial/arm/at91
    script            ser_arm_at91.cdl  
    description       "Atmel AT91 on-chip serial device driver."
}

package CYGPKG_IO_SERIAL_ARM_LPC2XXX {
    alias             { "ARM LPC2XXX serial device drivers"
                        devs_serial_arm_lpc2xxx lpc2xxx_serial_driver }
    hardware
    directory         devs/serial/arm/lpc2xxx
    script            ser_arm_lpc2xxx.cdl
    description       "ARM LPC2XXX serial device drivers"
}

package CYGPKG_IO_SERIAL_ARM_LPC24XX {
    alias             { "ARM LPC24XX/LPC17XX serial device drivers" }
    hardware
    directory         devs/serial/arm/lpc24xx
    script            ser_arm_lpc24xx.cdl
    description       "ARM LPC24XX/LPC17XX serial device drivers"
}

package CYGPKG_IO_SERIAL_CORTEXM_A2FXXX {
    alias             { "Cortex-M3/Actel Smartfusion (A2Fxxx) serial device drivers"
                        devs_serial_cortexm_a2fxxx a2fxxx_serial_driver }
    hardware
    directory         devs/serial/cortexm/a2fxxx
    script            ser_cortexm_a2fxxx.cdl
    description       "Cortex-M3/Actel Smartfusion serial device drivers"
}

package CYGPKG_IO_SERIAL_POWERPC_COGENT {
    alias             { "Cogent PowerPC serial device drivers"
                        devs_serial_powerpc_cogent cogent_serial_driver }
    hardware
    directory         devs/serial/powerpc/cogent
    script            ser_powerpc_cogent.cdl    
    description       "Cogent PowerPC serial device drivers"
}

package CYGPKG_IO_SERIAL_POWERPC_MPC555 {
    alias             { "mpc555 PowerPC serial device drivers"
                        devs_serial_powerpc_mpc555 mpc555_serial_driver }
    hardware
    directory         devs/serial/powerpc/mpc555
    script            ser_powerpc_mpc555.cdl    
    description       "mpc555 PowerPC serial device drivers"
}

package CYGPKG_IO_SERIAL_FREESCALE_ESCI_H {
    alias             { "ESCI serial device header"
                        devs_serial_freescale_esci_h esci_serial_header }
    hardware
    directory         devs/serial/freescale/esci/hdr
    script            ser_freescale_esci_h.cdl  
    description       "Freescale eSCI - Enhanced Serial Communications Interface header.
                       Needed by hal_diag and ser_esci drivers."
}

package CYGPKG_IO_SERIAL_FREESCALE_ESCI {
    alias             { "ESCI serial device driver"
                        devs_serial_freescale_esci esci_serial_driver }
    hardware
    directory         devs/serial/freescale/esci/drv
    script            ser_freescale_esci.cdl    
    description       "Freescale eSCI - Enhanced Serial Communications Interface serial device driver"
}

package CYGPKG_IO_SERIAL_FREESCALE_UART_HDR {
    alias             { "Freescale UART serial device header"
                        devs_serial_freescale_uart_hdr freescale_uart_serial_header }
    hardware
    directory         devs/serial/freescale/uart/hdr
    script            ser_freescale_uart_hdr.cdl
    description       "Freescale UART header.
                       Needed by hal_diag and ser_freescale_uart drivers."
}

package CYGPKG_IO_SERIAL_FREESCALE_UART {
    alias             { "Freescale UART serial device driver"
                        devs_serial_freescale_uart freescale_uart_serial_driver }
    hardware
    directory         devs/serial/freescale/uart/drv
    script            ser_freescale_uart.cdl
    description       "Freescale UART driver."
}

package CYGPKG_IO_SERIAL_POWERPC_QUICC_SMC {
    alias             { "PowerPC QUICC/SMC serial device drivers"
                        devs_serial_quicc_smc quicc_smc_serial_driver
                        devs_serial_powerpc_quicc_smc
                        devs_serial_powerpc_quicc quicc_serial_driver }
    hardware
    directory         devs/serial/powerpc/quicc
    script            ser_quicc_smc.cdl 
    description       "PowerPC QUICC/SMC serial device drivers"
}

package CYGPKG_IO_SERIAL_POWERPC_MPC8XXX {
    alias             { "PowerPC MPC8XXX (QUICC-II) serial device drivers"
                        devs_serial_powerpc_mpc8xxx mpc8xxx_serial_driver }
    hardware
    directory         devs/serial/powerpc/mpc8xxx
    script            ser_mpc8xxx.cdl   
    description       "PowerPC MPC8XXX (QUICC-II) serial device drivers"
}

package CYGPKG_IO_SERIAL_POWERPC_QUICC2_SCC {
    alias             { "PowerPC VADS QUICC2/SCC serial device drivers"
                        devs_serial_quicc2_scc quicc2_scc_serial_driver
                        devs_serial_powerpc_quicc2_scc
                        devs_serial_powerpc_quicc2 quicc2_serial_driver }
    hardware
    directory         devs/serial/powerpc/quicc2
    script            ser_quicc2_scc.cdl        
    description       "PowerPC VADS QUICC2/SCC serial device drivers"
}

package CYGPKG_IO_SERIAL_POWERPC_PPC405 {
    alias             { "PowerPC PPC405GP serial device drivers" devs_serial_ppc405 }
    hardware
    directory         devs/serial/powerpc/ppc405
    script            ser_powerpc_ppc405.cdl    
    description       "PowerPC PPC405GP serial device drivers"
}

package CYGPKG_IO_SERIAL_SPARCLITE_SLEB {
    alias             { "SPARClite SLEB serial device drivers"
                        devs_serial_sparclite_sleb sleb_serial_driver }
    hardware
    directory         devs/serial/sparclite/sleb
    script            ser_sparclite_sleb.cdl    
    description       "SPARClite SLEB serial device drivers"
}

package CYGPKG_IO_SERIAL_TX39_JMR3904 {
    alias             { "TX39 JMR3904 serial device drivers"
                        devs_serial_tx39_jmr3904 jmr3904_serial_driver
                        devs_serial_mips_jmr3904 tx3904_serial_driver }
    hardware
    directory         devs/serial/mips/jmr3904
    script            ser_mips_jmr3904.cdl      
    description       "TX39 JMR3904 serial device drivers"
}

package CYGPKG_IO_SERIAL_MIPS_ATLAS {
    alias             { "Atlas serial device drivers"
                        devs_serial_atlas atlas_serial_driver
                        devs_serial_mips_atlas mips_atlas_serial_driver }
    hardware
    directory         devs/serial/mips/atlas
    script            ser_mips_atlas.cdl        
    description       "Atlas serial device drivers"
}

package CYGPKG_IO_SERIAL_MIPS_REF4955 {
    alias             { "TX49 REF4955 serial device drivers"
                        devs_serial_mips_ref4955 ref4955_serial_driver }
    hardware
    directory         devs/serial/mips/ref4955
    script            ser_mips_ref4955.cdl      
    description       "TX49 REF4955 serial device drivers"
}

package CYGPKG_IO_SERIAL_MIPS_VRC437X {
    alias             { "VRC437X serial device drivers"
                        devs_serial_mips_vrc437x vrc437x_serial_driver }
    hardware
    directory         devs/serial/mips/vrc437x
    script            ser_mips_vrc437x.cdl      
    description       "VRC437X serial device drivers"
}

package CYGPKG_IO_SERIAL_MN10300 {
    alias             { "MN10300 serial device drivers"
                        devs_serial_mn10300_mn10300
                        devs_serial_mn10300 mn10300_serial_driver }
    hardware
    directory         devs/serial/mn10300/mn10300
    script            ser_mn10300.cdl   
    description       "MN10300 serial device drivers"
}

package CYGPKG_IO_SERIAL_I386_PC {
    alias             { "PC serial device drivers"
                        devs_serial_i386_pc pc_serial_driver }
    hardware
    directory         devs/serial/i386/pc
    script            ser_i386_pc.cdl   
    description       "PC serial device drivers"
}

package CYGPKG_IO_SERIAL_GENERIC_16X5X {
    alias             { "16x5x compatible serial device drivers"
                        devs_serial_generic_16x5x 16x5x_serial_driver }
    hardware
    directory         devs/serial/generic/16x5x
    script            ser_generic_16x5x.cdl
    description       "16x5x compatible serial device drivers"
}

package CYGPKG_IO_SERIAL_SH_SCI {
    alias             { "SH SCI serial device drivers"
                        devs_serial_sh_sci sh_sci_serial_driver }
    hardware
    directory         devs/serial/sh/sci
    script            ser_sh_sci.cdl    
    description       "SH SCI serial device drivers"
}

package CYGPKG_IO_SERIAL_SH_SCIF {
    alias             { "SH SCIF serial device drivers"
                        devs_serial_sh_scif scif_serial_driver }
    hardware
    directory         devs/serial/sh/scif
    script            ser_sh_scif.cdl   
    description       "SH SCIF serial device drivers"
}

package CYGPKG_DEVS_ETH_PHY {
        alias           { "Generic PHY support" eth_phy_support }
        hardware
        directory       devs/eth/phy
        script          phy_eth_drivers.cdl
        description     "PHY (ethernet physical transciever) API."
}

package CYGPKG_DEVS_ETH_ARM_CERF {
        alias           { "Crystal LAN ethernet driver for Cerf boards" cerf_eth_driver }
        hardware
        directory       devs/eth/arm/cerf
        script          cerf_eth_drivers.cdl
        description     "Ethernet driver for Crystal LAN on Cerf based
                         development boards."
}

package CYGPKG_DEVS_ETH_ARM_CERFPDA {
        alias           { "Crystal LAN ethernet driver for the Cerfpda" cerfpda_eth_driver }
        hardware
        directory       devs/eth/arm/cerfpda
        script          cerfpda_eth_drivers.cdl
        description     "Ethernet driver for Crystal LAN on the Cerfpda."
}

package CYGPKG_DEVS_ETH_ARM_NETARM {
        alias           { "Ethernet driver for the NETARM" NETARM_eth_driver }
        hardware
        directory       devs/eth/arm/netarm
        script          netarm_eth_driver.cdl
        description     "Ethernet driver for NETARM."
}

package CYGPKG_DEVS_ETH_ARM_PHYCORE229X {
      alias           { "Ethernet driver for phyCORE-LPC229x board" devs_eth_arm_phycore229x }
      hardware
      directory       devs/eth/arm/phycore229x
      script          phycore229x_eth_drivers.cdl
      description     "Ethernet device driver for phyCORE-LPC229x board"
}

package CYGPKG_DEVS_ETH_ARM_OLPCE2294 {
        alias           { "Ethernet driver for Olimex LPC-E2294 board" olpce2294_eth_driver }
        hardware
        directory       devs/eth/arm/olpce2294
        script          olpce2294_eth_drivers.cdl
        description     "
            Ethernet device driver for Olimex LPC-E2294 board."
}

package CYGPKG_DEVS_ETH_ARM_OLPCL2294 {
        alias           { "Ethernet driver for Olimex LPC-L2294-1MB board" olpcl2294_eth_driver }
        hardware
        directory       devs/eth/arm/olpcl2294
        script          olpcl2294_eth_drivers.cdl
        description     "
            Ethernet device driver for Olimex LPC-L2294-1MB board."
}

package CYGPKG_DEVS_ETH_FREESCALE_ENET {
        alias           { "Freescale ENET Ethernet driver" }
        directory       devs/eth/freescale/enet
        script          eth_freescale_enet.cdl
        hardware
        description     "Ethernet driver for the Freescale ENET ethernet controller."
}

package CYGPKG_DEVS_ETH_CORTEXM_A2FXXX {
    alias        { "Cortex-M3/Actel Smartfusion (A2Fxxx) ethernet driver" a2fxxx_eth_driver }
    directory    devs/eth/cortexm/a2fxxx
    script       a2fxxx_eth.cdl
    hardware
    description  "Actel A2Fxxx Ethernet driver for Cortex-M3 A2Fxxx based boards."
}

package CYGPKG_IO_SERIAL_SH_EDK7708 {
    alias             { "SH3 EDK7708 serial device drivers"
                        devs_serial_sh3_edk7708
                        devs_serial_sh_edk7708 edk7708_serial_driver }
    hardware
    directory         devs/serial/sh/edk7708
    script            ser_sh_edk7708.cdl        
    description       "SH3 EDK7708 serial device drivers"
}

package CYGPKG_IO_SERIAL_SH_CQ7708 {
    alias             { "SH3 cq7708 serial device drivers"
                        devs_serial_sh3_cq7708
                        devs_serial_sh_cq7708 cq7708_serial_driver }
    hardware
    directory         devs/serial/sh/cq7708
    script            ser_sh_cq7708.cdl 
    description       "SH3 cq7708 serial device drivers"
}

package CYGPKG_IO_SERIAL_SH_SE77X9 {
    alias             { "SH3 SE77X9 serial device driver"
                        devs_serial_sh3_se77x9 se77x9_serial_driver }
    hardware
    directory         devs/serial/sh/se77x9
    script            ser_sh_se77x9.cdl 
    description       "SH3 SE77x9 serial device driver"
}

package CYGPKG_IO_SERIAL_SH_SH4_202_MD {
    alias             { "SH4-202 MicroDev serial device driver"
                        devs_serial_sh4_202_md sh4_202_md_serial_driver }
    hardware
    directory         devs/serial/sh/sh4_202_md
    script            ser_sh4_202_md.cdl        
    description       "This option enables the serial device drivers for the
        SuperH SH4-202 MicroDev board, based on the generic SH SCIF driver."
}

package CYGPKG_IO_SERIAL_V85X_V850 {
    alias             { "NEC V850 serial device drivers"
                        devs_serial_v85x_v850 v850_serial_driver }
    hardware
    directory         devs/serial/v85x/v850
    script            ser_v85x_v850.cdl 
    description       "Serial device drivers for systems based on NEC V850
                       SA1 (70F3017) or SB1 (70F3033) processors."
}

package CYGPKG_IO_SERIAL_MIPS_UPD985XX {
    alias             { "NEC MIPS uPD985xx serial driver"
                        devs_serial_mips_upd985xx upd985xx_serial_driver }
    hardware
    directory         devs/serial/mips/upd985xx
    script            ser_mips_upd985xx.cdl     
    description       "NEC MIPS uPD985xx serial device drivers"
}

package CYGPKG_IO_SERIAL_MIPS_IDT79S334A {
    alias             { "MIPS IDT 79RC32334 reference platform serial device drivers"
                        devs_serial_idt79s334a idt79s334a_serial_driver
                        devs_serial_mips_idt79s334 mips_idt79s334a_serial_driver }
    hardware
    directory         devs/serial/mips/idt79s334a
    script            ser_mipsidt_334a.cdl      
    description       "IDT 334a reference platform serial device drivers"
}

package CYGPKG_IO_SERIAL_H8300_SCI {
    alias             { "H8/300 SCI serial device drivers"
                        devs_serial_h8300h_sci h8300h_sci_serial_driver }
    hardware
    directory       devs/serial/h8300/h8300h
    script          serial_h8300.cdl  
    description       "H8/300 SCI serial device drivers"
}

package CYGPKG_IO_SERIAL_MCF5272_UART {
    alias             { "MCF5272 Serial UART Drivers"
                         devs_MCF5272_uart_driver }
    hardware
    directory         devs/serial/mcf52xx/mcf5272
    script            ser_mcf5272_uart.cdl      
    description       "Serial MCF5272 UART Drivers."
}

package CYGPKG_IO_SERIAL_LOOP {
    alias             { "Loop serial device drivers"
                        devs_serial_loop loop_serial_driver }
    directory         devs/serial/loop
    script            ser_loop.cdl      
    description       "Loopback serial device driver."
}

package CYGPKG_IO_FILEIO {
        alias           { "File IO" fileio io_file }
        directory       io/fileio
        script          fileio.cdl
        description "
           This package contains the infrastructure for doing POSIX compliant
           file IO."
}

package CYGPKG_FS_RAM {
        alias           { "RAM Filesystem" ramfs ram_fs fs_ram }
        directory       fs/ram
        script          ramfs.cdl
        description "
           This package contains a RAM resident filesystem."
}

package CYGPKG_FS_ROM {
        alias           { "ROM Filesystem" romfs rom_fs fs_rom }
        directory       fs/rom
        script          romfs.cdl
        description "
           This package contains a ROM resident filesystem."
}

package CYGPKG_FS_JFFS2 {
        alias           { "JFFS2 Filesystem" jffs2 }
        directory       fs/jffs2
        script          jffs2.cdl
        description "
           This package contains the JFFS2 filesystem."
}

package CYGPKG_LINUX_COMPAT {
        alias           { "Linux compatibility" linux_compat linuxcompat }
        directory       compat/linux
        script          linux.cdl
        description "
eCos supports a basic Linux compatibility Layer providing various
functions, equivalents or stubs expected by Linux kernel code, for
assistance in porting drivers and file system code from Linux.
Note this does not provide Linux compatibility to applications."
}

package CYGPKG_IO_ETH_DRIVERS {
        alias           { "Common ethernet support" net_drivers eth_drivers CYGPKG_NET_ETH_DRIVERS }
        directory       io/eth
        script          eth_drivers.cdl
        description     "Platform independent ethernet support."
}

package CYGPKG_IO_USB { 
        alias           { "Generic USB support" usb }
        hardware
        directory       io/usb/common
        script          usb.cdl
        description     "Generic USB support"
}

package CYGPKG_IO_USB_SLAVE {
        alias           { "Generic USB slave-side support" usbs }
        hardware
        directory       io/usb/slave
        script          usbs.cdl
        description     "Generic USB slave-side support"
}

package CYGPKG_IO_USB_SLAVE_ETH {
        alias           { "USB slave-side ethernet class drivers" usbs_eth }
        directory       io/usb/eth/slave
        script          usbs_eth.cdl
        description     "Support for USB peripherals that provide an ethernet-class function"
}

package CYGPKG_IO_USB_SLAVE_SERIAL {
        alias           { "USB slave-side serial drivers" usbs_serial }
        directory       io/usb/serial/slave
        script          usbs_serial.cdl
        description     "Support for USB peripherals that present themselves 
                         as serial devices to the host."
}

package CYGPKG_IO_USB_SLAVE_MSD {
       alias           { "USB slave-side mass-storage drivers" usbs_msd }
       directory       io/usb/msd/slave
       script          usbs_msd.cdl
       description     "Support for USB peripherals that present themselves 
                        as mass storage devices to the host."
}

package CYGPKG_DEVS_USB_SA11X0 {
        alias           { "Device-driver for the SA11X0 on-chip USB support" usb_sa11x0 }
        hardware
        directory       devs/usb/sa11x0
        script          usbs_sa11x0.cdl
        description     "A device driver for the SA11X0 on-chip USB slave port"
}

package CYGPKG_DEVS_USB_UPD985XX {
        alias           { usb_upd985xx }
        hardware
        directory       devs/usb/nec_upd985xx
        script          usbs_upd985xx.cdl
        description     "A device driver for the NEC uPD985xx on-chip USB device"
}

package CYGPKG_DEVS_USB_AT91 {
        alias           { usb_at91 }
        hardware
        directory       devs/usb/at91
        script          usbs_at91.cdl
        description     "A device driver for the ATMEL AT91 on-chip USB device"
}

package CYGPKG_DEVS_USB_D12 {
        alias           { usb_d12 }
        hardware
        directory       devs/usb/d12
        script          usbs_d12.cdl
        description     "A device driver for the Philips PDIUSBD12 full speed USB peripheral chip."
}

package CYGPKG_DEVS_USB_I386_SOROD12 {
        alias           { usb_sorod12 }
        hardware
        directory       devs/usb/i386/SoRoD12
        script          usbs_i386_sorod12.cdl
        description     "A device driver for the SoRo PC/104 D12 USB Slave Board."
}

package CYGPKG_NET {
        alias           { "Networking" net }
        directory       net/common
        script          net.cdl
        description     "Generic networking support, including TCP/IP."
}

package CYGPKG_NET_AUTOTEST {
        alias           { "Network Autotesting" autotest net_autotest }
        directory       net/autotest
        script          net_autotest.cdl
        description     "Automated network testing support."
}

package CYGPKG_NET_OPENBSD_STACK {
        alias           { "OpenBSD Stack" openbsd_net }
        directory       net/tcpip
        script          openbsd_net.cdl
        description     "TCP/IP stack from OpenBSD."
}

package CYGPKG_NET_FREEBSD_STACK {
        alias           { "FreeBSD Stack" freebsd_net }
        directory       net/bsd_tcpip
        script          freebsd_net.cdl
        description     "TCP/IP stack from FreeBSD, including KAME IPv6."
}

package CYGPKG_NET_FTPCLIENT {
        alias           { "FTP Client" ftpclient }
        directory       net/ftpclient
        script          ftpclient.cdl
        description     "FTP client support for get and put of files."
}

package CYGPKG_SNMPLIB {
        alias           { "SNMP library" snmplib }
        directory       net/snmp/lib
        script          snmplib.cdl
        description     "UCD SNMP library."
}

package CYGPKG_SNMPAGENT {
        alias           { "SNMP agent" snmpagent }
        directory       net/snmp/agent
        script          snmpagent.cdl
        description     "UCD SNMP agent."
}

package CYGPKG_HTTPD {
        alias           { "HTTP server" httpd }
        directory       net/httpd
        script          httpd.cdl
        description     "HTTP server."
}

package CYGPKG_NS_DNS {
        alias           { "DNS" dns }
        directory       net/ns/dns
        script          dns.cdl
        description     "DNS client support."
}

package CYGPKG_NET_SNTP {
        alias           { "SNTP support" sntp }
        directory       net/sntp
        script          sntp.cdl
        description "
This package provides a SNTP client which can recieve broadcast time 
information and set the system clock."
}  

package CYGPKG_PPP {
        alias           { "PPP support" ppp }
        directory       net/ppp
        script          ppp.cdl
        description     "PPP support."
}

package CYGPKG_NET_IPSEC_LIBIPSEC {
        alias           { "libipsec support" libipsec }
        directory       net/ipsec/libipsec
        script          libipsec.cdl
        description "
This package provides the libipsec library used by racoon etc for 
configuring IPSEC"
}

package CYGPKG_DEVS_ETH_ARM_EDB7XXX {
        alias           { "Cirrus Logic ethernet driver for EP7xxx boards" edb7xxx_eth_driver }
        hardware
        directory       devs/eth/arm/edb7xxx
        script          edb7xxx_eth_drivers.cdl
        description     "Ethernet driver for Cirrus Logic EP7xxx based
                         development boards."
}

package CYGPKG_DEVS_ETH_ARM_KS32C5000 {
        alias           { "Samsung KS32C5000 ethernet driver" eth_ks32c5000 }
        hardware
        directory       devs/eth/arm/ks32c5000
        script          ks32c5000_eth.cdl
        description     "Ethernet driver for Samsung ks32c5000/S3c4510."
}


package CYGPKG_DEVS_ETH_ARM_AAED2000 {
        alias           { "Ethernet driver for Agilent AAED2000 board" aaed2000_eth_driver }
        hardware
        directory       devs/eth/arm/aaed2000
        script          aaed2000_eth_drivers.cdl
        description     "Ethernet driver for Agilent AAED2000
                         development boards."
}
package CYGPKG_DEVS_ETH_AMD_PCNET {
        alias           { "AMD PCNET ethernet driver" pcnet_eth_driver }
        hardware
        directory       devs/eth/amd/pcnet
        script          amd_pcnet_eth_drivers.cdl
        description     "Ethernet driver for AMD PCNET controller."
}

package CYGPKG_DEVS_ETH_AMD_LANCEPCI {
        alias           { "AMD Lance PCI ethernet driver" lancepci_eth_driver }
        hardware
        directory       devs/eth/amd/lancepci
        script          amd_lancepci_eth_drivers.cdl
        description     "Ethernet driver for AMD Lance PCI controller (vmWare)."
}

package CYGPKG_DEVS_ETH_DAVICOM_DM9000 {
        alias           { "Davicom DM9000 ethernet driver" dm9000_eth_driver }
        hardware
        directory       devs/eth/davicom/dm9000
        script          davicom_dm9000_eth_drivers.cdl
        description     "Ethernet driver for Davicom DM9000 controller."
}

package CYGPKG_DEVS_ETH_OPENCORES_ETHMAC {
        alias           { "OpenCores ETHMAC ethernet driver" ethmac_eth_driver }
        hardware
        directory       devs/eth/opencores/ethmac
        script          opencores_ethmac_eth_drivers.cdl
        description     "Ethernet driver for OpenCores ETHMAC controller."
}

package CYGPKG_DEVS_ETH_MIPS_MIPS32_MALTA {
        alias           { "MIPS Malta board ethernet driver" malta_eth_driver }
        hardware
        directory       devs/eth/mips/malta
        script          mips_mips32_malta_eth_drivers.cdl
        description     "Ethernet driver for MIPS Malta board."
}

package CYGPKG_DEVS_ETH_MN10300_ASB2305 {
        alias           { "MN10300 ASB2305 board ethernet driver" asb2305_eth_driver }
        hardware
        directory       devs/eth/mn10300/asb2305
        script          mn10300_asb2305_eth.cdl
        description     "Ethernet driver for MN10300 ASB2305 board."
}

package CYGPKG_DEVS_ETH_VIA_RHINE {
        alias           { "VIA Rhine ethernet driver" rhine_eth_driver }
        hardware
        directory       devs/eth/via/rhine
        script          via_rhine_eth_drivers.cdl
        description     "Ethernet driver for VIA Rhine controller."
}

package CYGPKG_DEVS_ETH_SH_HS7729PCI {
        alias           { "HS7729PCI ethernet driver" hs7729pci_eth_driver }
        hardware
        directory       devs/eth/sh/hs7729pci
        script          sh_hs7729pci_eth_drivers.cdl
        description     "Ethernet driver for HS7729PCI development boards."
}

package CYGPKG_DEVS_ETH_SH_SE77X9 {
        alias           { "SE77X9 ethernet driver" se77x9_eth_driver }
        hardware
        directory       devs/eth/sh/se77x9
        script          sh_se77x9_eth_drivers.cdl
        description     "Ethernet driver for SE77x9 development boards."
}

package CYGPKG_DEVS_ETH_SH_SE7751 {
        alias           { "SE7751 ethernet driver" se7751_eth_driver }
        hardware
        directory       devs/eth/sh/se7751
        script          sh_se7751_eth_drivers.cdl
        description     "Ethernet driver for SE7751 board."
}

package CYGPKG_DEVS_ETH_SH_ETHERC {
        alias           { "SH2 etherc driver" etherc_eth_driver }
        hardware
        directory       devs/eth/sh/etherc
        script          sh_etherc_eth_drivers.cdl
        description     "Ethernet driver for SH2 etherc controller."
}

package CYGPKG_DEVS_ETH_SH_MICRODEV {
      alias           { "SH4-202 MicroDev onboard ethernet support" devs_eth_sh_md }
      hardware
      directory       devs/eth/sh/sh4_202_md
      script          sh4_202_md_eth_drivers.cdl
      description "This package contains hardware support for onboard SMC91C111
                   ethernet device on the MicroDev board."
}

package CYGPKG_DEVS_ETH_ARM_EBSA285 {
        alias           { "Intel EBSA285 with PRO/100+ ethernet driver"
                           devs_eth_arm_ebsa285 ebsa285_eth_driver }
        hardware
        directory       devs/eth/arm/ebsa285
        script          ebsa285_eth_drivers.cdl
        description     "Ethernet driver for Intel EBSA285 with PRO/100+ boards."
}

package CYGPKG_DEVS_ETH_ARM_FLEXANET {
      alias           { "SA11x0/Flexanet onboard ethernet support" devs_eth_arm_flexanet }
      hardware
      directory       devs/eth/arm/flexanet
      script          flexanet_eth_drivers.cdl
      description "This package contains hardware support for onboard SMC91C96
                   ethernet device on the Flexanet board."
}

package CYGPKG_DEVS_ETH_ARM_INNOVATOR {
      alias           { "OMAP Innovator onboard ethernet support" devs_eth_arm_innovator }
      hardware
      directory       devs/eth/arm/innovator
      script          innovator_eth_drivers.cdl
      description "This package contains hardware support for onboard SMC91C96
                   ethernet device on the Innovator board."
}

package CYGPKG_DEVS_ETH_ARM_INTEGRATOR {
        alias           { "ARM INTEGRATOR with Intel PRO/100+ ethernet driver"
                           devs_eth_arm_integrator integrator_eth_driver }
        hardware
        directory       devs/eth/arm/integrator
        script          integrator_eth_drivers.cdl
        description     "Ethernet driver for Intel PRO/100+ boards on ARM INTEGRATOR."
}

package CYGPKG_DEVS_ETH_POWERPC_QUICC {
        alias           { "QUICC ethernet driver" quicc_eth_driver }
        hardware
        directory       devs/eth/powerpc/quicc
        script          quicc_eth_drivers.cdl
        description     "Ethernet driver for PowerPC QUICC (MPC8xx) based boards."
}

package CYGPKG_DEVS_ETH_POWERPC_MBX {
        alias           { "MBX ethernet driver specifics" mbx_eth_driver }
        hardware
        directory       devs/eth/powerpc/mbx
        script          mbx_eth_drivers.cdl
        description     "Ethernet driver specifics for Motorola MBX PowerPC (MPC8xx) based boards."
}

package CYGPKG_DEVS_ETH_POWERPC_QUICC2 {
        alias           { "QUICC2 ethernet driver" quicc2_eth_driver }
        hardware
        directory       devs/eth/powerpc/quicc2
        script          quicc2_eth_drivers.cdl
        description     "Fast ethernet driver for PowerPC QUICC2 (MPC8260) based boards."
}

package CYGPKG_DEVS_ETH_POWERPC_FEC {
        alias           { "FEC ethernet driver" fec_eth_driver }
        hardware
        directory       devs/eth/powerpc/fec
        script          fec_eth_drivers.cdl
        description     "Ethernet driver for PowerPC FEC (MPC8xxT) based boards."
}

package CYGPKG_DEVS_ETH_POWERPC_FCC {
        alias           { "FCC ethernet driver" fcc_eth_driver }
        hardware
        directory       devs/eth/powerpc/fcc
        script          fcc_eth_drivers.cdl
        description     "Fast ethernet driver for PowerPC MPCxxx based boards."
}

package CYGPKG_DEVS_ETH_POWERPC_PPC405 {
        alias           { "PPC405 ethernet driver" ppc405_eth_driver }
        hardware
        directory       devs/eth/powerpc/ppc405
        script          ppc405_eth_drivers.cdl
        description     "Ethernet driver for PowerPC 405GP based boards."
}

package CYGPKG_DEVS_ETH_POWERPC_VIPER {
        alias           { "A&M Viper ethernet driver" viper_eth_driver }
        hardware
        directory       devs/eth/powerpc/viper
        script          viper_eth_drivers.cdl
        description     "Ethernet driver specifics for A&M Viper (MPC8xxT) based boards."
}

package CYGPKG_DEVS_ETH_POWERPC_EC555 {
        alias           { "Crystal LAN ethernet driver for ec555 boards" ec555_eth_driver }
        hardware
        directory       devs/eth/powerpc/ec555
        script          ec555_eth_drivers.cdl
    description     "Ethernet driver for Crystal LAN on ec555 board."
}

package CYGPKG_DEVS_ETH_INTEL_I82559 {
        alias           { "Intel 82559 ethernet driver"
                           devs_eth_intel_i82559 i82559_eth_driver }
        hardware
        directory       devs/eth/intel/i82559
        script          intel_i82559_eth_drivers.cdl
        description     "Ethernet driver for Intel 82559 NIC."
}

package CYGPKG_DEVS_ETH_INTEL_I82544 {
        alias           { "Intel 82544 ethernet driver"
                           devs_eth_intel_i82544 i82544_eth_driver }
        hardware
        directory       devs/eth/intel/i82544
        script          intel_i82544_eth_drivers.cdl
        description     "Ethernet driver for Intel 82544 NIC."
}

package CYGPKG_DEVS_ETH_INTEL_I21143 {
        alias           { "Intel 21143 ethernet driver"
                           devs_eth_intel_i21143 i21143_eth_driver }
        hardware
        directory       devs/eth/intel/i21143
        script          intel_i21143_eth_drivers.cdl
        description     "Ethernet driver for Intel \[DEC\] 21143 NIC."
}

package CYGPKG_DEVS_ETH_MIPS_VRC4375 {
        alias           { "NEC MIPS VRC4375 ethernet driver"
                           devs_eth_mips_vrc4375 vrc4375_eth_driver }
        hardware
        directory       devs/eth/mips/vrc4375
        script          vrc4375_eth_drivers.cdl
        description     "Ethernet driver for NEC MIPS VRC4375 'Blue Nile'
                        board with Intel \[ex Digital Equipment\]
                        i21143 ethernet interface."
}

package CYGPKG_DEVS_ETH_MIPS_RM7000_OCELOT {
        alias           { "Ocelot ethernet drivers"
                           devs_eth_mips_rm7000_ocelot ocelot_eth_driver }
        hardware
        directory       devs/eth/mips/ocelot
        script          mips_rm7000_ocelot_eth_drivers.cdl
        description     "Ethernet driver for PMC-Sierra Ocelot board."
}

package CYGPKG_DEVS_ETH_ARM_IQ80321 {
        alias           { "Intel IQ80321 with onboard 82544 ethernet driver"
                           devs_eth_arm_iq80321 iq80321_eth_driver }
        hardware
        directory       devs/eth/arm/iq80321
        script          iq80321_eth_drivers.cdl
        description     "Ethernet driver for Intel IQ80321 with onboard 82544 NIC."
}

package CYGPKG_DEVS_ETH_ARM_XSCALE_IQ80310 {
        alias           { "Intel IQ80310 with onboard 82559 ethernet driver"
                           devs_eth_arm_iq80310 iq80310_eth_driver }
        hardware
        directory       devs/eth/arm/iq80310
        script          iq80310_eth_drivers.cdl
        description     "Ethernet driver for Intel IQ80310 with onboard 82559 NIC."
}

package CYGPKG_DEVS_ETH_ARM_IXDP425_I82559 {
        alias           { "IXDP425 (PCI) / Intel 82559 ethernet driver"
                           devs_eth_arm_ixdp425_i82559 }
        hardware
        directory       devs/eth/arm/ixdp425/i82559
        script          ixdp425_i82559_eth_driver.cdl
        description     "Ethernet driver for IXDP425 with Intel 82559 PCI NIC."
}

package CYGPKG_DEVS_ETH_ARM_XSCALE_XSENGINE {
       alias           { "XSEngine SMC91C111 ethernet driver" devs_eth_arm_xsengine }
       hardware
       directory       devs/eth/arm/xsengine
       script          xsengine_eth_drivers.cdl
       description     "Ethernet driver for XSEngine board."
}

package CYGPKG_DEVS_ETH_ARM_GRG_I82559 {
        alias           { "GRG / Intel 82559 ethernet driver"
                           devs_eth_arm_grg_i82559 }
        hardware
        directory       devs/eth/arm/grg/i82559
        script          grg_i82559_eth_driver.cdl
        description     "Ethernet driver for GRG with Intel 82559 PCI NIC."
}

package CYGPKG_DEVS_ETH_I386_PC_I82559 {
        alias           { "Standard PC with EtherPro 10/100 ethernet device"
                           devs_eth_i386_pc_i82559 pc_etherpro }
        hardware
        directory       devs/eth/i386/pc/i82559
        script          i386_pc_i82559_eth_drivers.cdl
        description     "Ethernet driver for standard PC with Intel 82559 NIC. This is
                         essentially support for a EtherPro 10/100 PCI card."
}

package CYGPKG_DEVS_ETH_I386_PC_I82544 {
        alias           { "Standard PC with Intel Gigabit ethernet device"
                           devs_eth_i386_pc_i82544 pc_ether_giga }
        hardware
        directory       devs/eth/i386/pc/i82544
        script          i386_pc_i82544_eth_drivers.cdl
        description     "Ethernet driver for standard PC with Intel 82544 Gigabit NIC."
}

package CYGPKG_DEVS_ETH_I386_PC_LANCEPCI {
        alias           { "Standard PC with AMD Lance PCI device"
                           devs_eth_i386_pc_lancepci pc_ether_lancepci }
        hardware
        directory       devs/eth/i386/pc/lancepci
        script          i386_pc_lancepci_eth_drivers.cdl
        description     "Ethernet driver for standard PC with AMD Lance NIC (vmWare)."
}

package CYGPKG_DEVS_ETH_MIPS_ATLAS {
        alias           { "MIPS Atlas with onboard SAA9730 ethernet driver"
                           devs_eth_mips_atlas atlas_eth_driver }
        hardware
        directory       devs/eth/mips/atlas
        script          atlas_eth_drivers.cdl
        description     "Ethernet driver for MIPS Atlas with onboard SAA9730 NIC."
}

package CYGPKG_DEVS_ETH_NS_DP83902A {
        alias           { "NS DP83902A ethernet driver" dp83902a_eth_driver }
        hardware
        directory       devs/eth/ns/dp83902a
        script          ns_dp83902a_eth_drivers.cdl
        description     "Ethernet driver for NS DP83902A controller."
}

package CYGPKG_DEVS_ETH_NS_DP83816 {
        alias           { "NS DP83816 ethernet driver" dp83816_eth_driver }
        hardware
        directory       devs/eth/ns/dp83816
        script          ns_dp83816_eth_drivers.cdl
        description     "Ethernet driver for NS DP83816 controller."
}

package CYGPKG_DEVS_ETH_CL_CS8900A {
        alias           { "Cirrus Logic CS8900A ethernet driver" cs8900a_eth_driver }
        hardware
        directory       devs/eth/cl/cs8900a
        script          cl_cs8900a_eth_drivers.cdl
        description     "Ethernet driver for Cirrus Logic CS8900A controller."
}

package CYGPKG_DEVS_ETH_MIPS_UPD985XX {
        alias           { "NEC uPD985xx ethernet driver" uPD985xx_eth_driver }
        hardware
        directory       devs/eth/mips/upd985xx
        script          upd985xx_eth_drivers.cdl
        description     "NEC uPD985xx ethernet driver"
}

package CYGPKG_DEVS_ETH_MIPS_REFIDT334 {
        alias           { "MIPS IDT 79RC32334 reference platform ethernet driver"
                           devs_eth_refidt334 refidt334_eth_driver }
        hardware
        directory       devs/eth/mips/idt79s334a
        script          refidt334_eth_drivers.cdl
        description     "Ethernet driver for MIPS IDT 79RC32334 reference platform."
}

# Not sure whether this should be "hardware"; if so, it should be mentioned
# in all targets that can use it.
package CYGPKG_DEVS_ETH_CF {
        alias           { "PCMCIA (Compact Flash) ethernet drivers" cf_eth_drivers }
        directory       devs/eth/cf
        script          cf_eth_drivers.cdl
        hardware
        description     "Ethernet drivers for PCMCIA (Compact Flash) cardss."
}

package CYGPKG_DEVS_ETH_H8300_AKI3068NET {
        alias           { "Akizuki H8/3068 Board ethernet driver" aki3068net_eth_drivers }
        directory       devs/eth/h8300/aki3068net
        script          h8300_aki3068net_eth_drivers.cdl
        hardware
        description     "Ethernet drivers for Akizuki H8/3068 Network
                         micom board."
}

package CYGPKG_DEVS_ETH_H8300_H8MAX {
        alias           { "H8MAX Board ethernet driver" h8max_eth_drivers }
        directory       devs/eth/h8300/h8max
        script          h8300_h8max_eth_drivers.cdl
        hardware
        description     "Ethernet drivers for H8MAX board."
}

package CYGPKG_DEVS_ETH_H8300_EDOSK2674 {
        alias           { "EDOSK-2674 Board ethernet driver" edosk2674_eth_drivers }
        directory       devs/eth/h8300/edosk2674
        script          h8300_edosk2674_eth_drivers.cdl
        hardware
        description     "Ethernet drivers for EDOSK-2674 board."
}

package CYGPKG_DEVS_ETH_MCF5272 {
        alias           { "MCF5272 Fast Ethernet Controller driver" mcf5272_eth_driver}
        hardware
        directory       devs/eth/mcf52xx/mcf5272
        script          mcf5272_eth_driver.cdl
        description     "Ethernet driver for the MCF5272."
}


package CYGPKG_DEVS_ETH_ECOSYNTH {
        alias           { "Synthetic target ethernet driver" ecosyntheth ecosynth_eth_driver }
        directory       devs/eth/synth/ecosynth
        script          syntheth.cdl
        hardware
        description     "Ethernet driver for the synthetic target"
}

package CYGPKG_IO_PCI   {
        alias           { "PCI configuration library" io_pci }
        directory       io/pci
        script          io_pci.cdl
        hardware
        description "
           This package contains the PCI configuration library."
}

package CYGPKG_IO_WALLCLOCK {
        alias           { "Wallclock device framework" wallclock io_wallclock devices_wallclock device_wallclock }
        directory       io/wallclock
        script          wallclock.cdl
        description "
           This package provides a wallclock device framework. It is
           also necessary to select an actual driver implementation."
}

package CYGPKG_DEVICES_WALLCLOCK_SH3 {
        alias           { "Wallclock driver for SH3 RTC module" devices_wallclock_sh3 device_wallclock_sh3 }
        directory       devs/wallclock/sh/sh3
        script          wallclock_sh3.cdl
        hardware
        description "
           This package provides a wallclock driver implementation for the
           Hitachi SH3 CPU's RTC module."
}

package CYGPKG_DEVICES_WALLCLOCK_MPC5xx {
        alias           { "Wallclock driver for mpc5xx RTC module" devices_wallclock_mpc5xx device_wallclock_mpc5xx }
        directory       devs/wallclock/powerpc/mpc5xx
        script          wallclock_mpc5xx.cdl
        hardware
        description "
           This package provides a wallclock driver implementation for the
           Motorola mpc5xx CPU's RTC module."
}

package CYGPKG_DEVICES_WALLCLOCK_DALLAS_DS1307 {
        alias           { "Wallclock driver for Dallas 1307" devices_wallclock_ds1307 device_wallclock_ds1307 }
        directory       devs/wallclock/dallas/ds1307
        script          wallclock_ds1307.cdl
        hardware
        description "
           This package provides a driver implementation for 
           the Dallas 1307 wallclock."
}

package CYGPKG_DEVICES_WALLCLOCK_DALLAS_DS1742 {
        alias           { "Wallclock driver for Dallas 1742" devices_wallclock_ds1742 device_wallclock_ds1742 }
        directory       devs/wallclock/dallas/ds1742
        script          wallclock_ds1742.cdl
        hardware
        description "
           This package provides a driver implementation for 
           the Dallas 1742 wallclock."
}

package CYGPKG_DEVICES_WALLCLOCK_DALLAS_DS12887 {
        alias           { "Wallclock driver for Dallas 12887" devices_wallclock_ds12887 device_wallclock_ds12887 }
        directory       devs/wallclock/dallas/ds12887
        script          wallclock_ds12887.cdl
        hardware
        description "
           This package provides a driver implementation for 
           the Dallas 12887 wallclock."
}

package CYGPKG_DEVICES_WALLCLOCK_MIPS_REF4955 {
        alias           { "Wallclock driver for REF4955 board" devices_wallclock_ref4955 device_wallclock_ref4955 }
        directory       devs/wallclock/mips/ref4955
        script          wallclock_ref4955.cdl
        hardware
        description "
           This package provides a wallclock driver implementation for the
           Toshiba REF4955 board."
}

package CYGPKG_DEVICES_WALLCLOCK_I386_PC {
         alias          { "Standard PC RTC device" devs_wallclock_i386_pc_ds12887 pc_rtc }
         hardware
         directory      devs/wallclock/i386/pc
         script         i386_pc_wallclock_drivers.cdl
         description    "
            RTC driver for standard PC. This is essentially support for a
            Dallas DS12887 RTC."
}

package CYGPKG_DEVICES_WALLCLOCK_SH_HS7729PCI {
        alias           { "Wallclock driver for HS7729PCI board" devices_wallclock_hs7729pci device_wallclock_hs7729pci }
        directory       devs/wallclock/sh/hs7729pci
        script          wallclock_hs7729pci.cdl
        hardware
        description "
           This package provides a wallclock driver implementation for the
           Hitachi HS7729PCI board."
}

package CYGPKG_DEVS_WALLCLOCK_SYNTH {
        alias           { "Wallclock driver for synthetic target" devs_wallclock_synth wallclock_synth }
        directory       devs/wallclock/synth
        script          wallclock_synth.cdl
        hardware
        description "
           This package provides a wallclock driver implementation for the
           synthetic target."
}

package CYGPKG_DEVICES_WALLCLOCK_ARM_AIM711 {
       alias           { "Wallclock driver for AIM 711" devs_wallclock_arm_aim711 aim711_rt
c }
       directory       devs/wallclock/arm/aim711
       script          aim711_wallclock_drivers.cdl
       hardware
        description "
           This package provides a wallclock driver implementation for the
           ARM Industrial Module AIM 711."
}

package CYGPKG_DEVICES_WALLCLOCK_ARM_LPC2XXX {
        alias           { "Wallclock driver for LPC2xxx/LPC17xx RTC module" }
        directory       devs/wallclock/arm/lpc2xxx
        script          lpc2xxx_wallclock.cdl
        hardware
        description "
           This package provides a wallclock driver implementation for the
           LPC2xxx/LPC17xx RTC module."
}

package CYGPKG_DEVICES_WALLCLOCK_KINETIS_RTC {
        alias           { "Wallclock driver for Kinetis RTC module" }
        directory       devs/wallclock/freescale/kinetis
        script          wallclock_kinetis_rtc.cdl
        hardware
        description "
           This package provides a wallclock driver implementation for the
           Kinetis RTC module."
}

package CYGPKG_DEVICES_WATCHDOG_ARM_AEB {
        alias           { "Watchdog driver for ARM/AEB board" devices_watchdog_aeb device_watchdog_aeb }
        directory       devs/watchdog/arm/aeb
        script          watchdog_aeb.cdl
        hardware
        description "
           This package provides a watchdog driver implementation for the
           ARM/AEB board."
}

package CYGPKG_DEVICES_WATCHDOG_ARM_AT91 {
        alias           { "Watchdog driver for ARM AT91 CPU" devices_watchdog_at91 device_watchdog_at91 }
        directory       devs/watchdog/arm/at91
        script          watchdog_at91.cdl
        hardware
        description "
           This package provides a watchdog driver implementation for the
           ARM AT91 CPU."
}

package CYGPKG_DEVICES_WATCHDOG_ARM_AT91WDTC {
        alias           { "Watchdog driver for ARM AT91 WDTC" devices_watchdog_at91wdtc device_watchdog_at91wdtc }
        directory       devs/watchdog/arm/at91wdtc
        script          watchdog_at91wdtc.cdl
        hardware
        description "
           This package provides a watchdog driver implementation for the
           ARM AT91 CPUs which have the Watchdog Timer Controller."
}

package CYGPKG_DEVICES_WATCHDOG_ARM_LPC2XXX {
        alias           { "Watchdog driver for ARM LPC2XXX CPU" devices_watchdog_lpc2xxx device_watchdog_lpc2xxx }
       directory       devs/watchdog/arm/lpc2xxx
       script          watchdog_lpc2xxx.cdl
       hardware
       description "
           This package provides a watchdog driver implementation for the
           ARM LPC2XXX CPU."
}

package CYGPKG_DEVICES_WATCHDOG_ARM_EBSA285 {
        alias           { "Watchdog driver for ARM/EBSA285 board" devices_watchdog_ebsa285 device_watchdog_ebsa285 }
        directory       devs/watchdog/arm/ebsa285
        script          watchdog_ebsa285.cdl
        hardware
        description "
           This package provides a watchdog driver implementation for the
           ARM/EBSA285 board."
}

package CYGPKG_DEVICES_WATCHDOG_ARM_SA11X0 {
        alias           { "Watchdog driver for StrongARM SA11x0 devices" devices_watchdog_sa11x0 device_watchdog_sa11x0 }
        directory       devs/watchdog/arm/sa11x0
        script          watchdog_sa11x0.cdl
        hardware
        description "
           This package provides a watchdog driver implementation for
           Intel StrongARM SA11x0 integrated devices."
}

package CYGPKG_DEVICES_WATCHDOG_MN10300_MN10300 {
        alias           { "Watchdog driver for MN10300 chip" devices_watchdog_mn10300 device_watchdog_mn10300 }
        directory       devs/watchdog/mn10300/mn10300
        script          watchdog_mn10300.cdl
        hardware
        description "
           This package provides a watchdog driver implementation for the
           MN10300 chip."
}

package CYGPKG_DEVICES_WATCHDOG_MPC5xx {
        alias           { "Watchdog driver for mpc5xx processor" devices_watchdog_mpc5xx device_watchdog_mpc5xx }
        directory       devs/watchdog/powerpc/mpc5xx
        script          watchdog_mpc5xx.cdl
        hardware
        description "
           This package provides a watchdog driver implementation for the
           mpc5xx processor family."
}

package CYGPKG_DEVICES_WATCHDOG_SH_SH3 {
        alias           { "Watchdog driver for the Hitachi SH3 chip" devices_watchdog_sh3 device_watchdog_sh3 }
        directory       devs/watchdog/sh/sh3
        script          watchdog_sh3.cdl
        hardware
        description "
           This package provides a watchdog driver implementation for the
           Hitachi SH3 chip."
}

package CYGPKG_DEVICES_WATCHDOG_H8300_H8300H {
        alias           { "Watchdog driver for the Hitachi H8/300H chip" devices_watchdog_h8300h device_watchdog_h8300h }
        directory       devs/watchdog/h8300/h8300h
        script          watchdog_h8300h.cdl
        hardware
        description "
           This package provides a watchdog driver implementation for the
           Hitachi H8/300H chip."
}

package CYGPKG_DEVS_WATCHDOG_SYNTH {
        alias           { "Watchdog driver for the synthetic target" devices_watchdog_synth device_watchdog_synth }
        directory       devs/watchdog/synth
        script          synth_watchdog.cdl
        hardware
        description "
           This package provides a watchdog driver for the eCos
           synthetic target."
}

package CYGPKG_IO_WATCHDOG {
        alias           { "Watchdog IO device" watchdog io_watchdog }
        directory       io/watchdog
        script          watchdog.cdl
        description "
           This package provides a watchdog device."
}

package CYGPKG_DEVS_SPI_ARM_AT91 {
    alias         { "Atmel AT91 SPI device driver" devs_spi_arm_at91 spi_at91_driver }
    hardware
    directory     devs/spi/arm/at91
    script        spi_at91.cdl
    description   "Atmel AT91 on-chip spi device driver."
}

package CYGPKG_DEVS_SPI_ARM_EB55 {
    alias         { "Atmel AT91EB55 SPI devices" devs_spi_arm_eb55 spi_eb55_devices }
    hardware
    directory     devs/spi/arm/eb55
    script        spi_eb55.cdl
    description   "Atmel AT91EB55 spi devices."
}

package CYGPKG_DEVS_SPI_ARM_LPC2XXX {
    alias         { "LPC2xxx SPI driver" }
    hardware
    directory     devs/spi/arm/lpc2xxx
    script        spi_lpc2xxx.cdl
    description "This package provides a driver for the SPI unit of the LPC2xxx
                 controller family."
}

package CYGPKG_DEVS_SPI_FREESCALE_DSPI {
    alias         { "Freescale DSPI driver" }
    hardware
    directory     devs/spi/freescale/dspi
    script        spi_freescale_dspi.cdl
    description   "
        This package provides a driver for the Freescale DSPI interfaces."
}

package CYGPKG_DEVS_SPI_CORTEXM_A2FXXX {
    alias         { "Cortex-M3/Actel Smartfusion (A2Fxxx) SPI driver" }
    hardware
    directory     devs/spi/cortexm/a2fxxx
    script        spi_a2fxxx.cdl
    description "This package provides a driver for the SPI peripheral of Actel Smartfusion (A2Fxxx)
                 controller family."
}

package CYGPKG_DEVS_SPI_OPENCORES_SIMPLE_SPI {
    alias         { "OpenCores simple_spi driver" }
    hardware
    directory     devs/spi/opencores/simple_spi
    script        spi_simple_spi.cdl
    description "This package provides a driver for the simple_spi peripheral from OpenCores."
}

package CYGPKG_IO_SPI {
        alias      { "Generic SPI support" spi io_spi spi_io }
        directory  io/spi
        script     spi.cdl
        hardware
        description "
          The generic SPI package provides an API for accessing devices
          attached to an SPI bus. It also provides support for writing
          bus drivers and for defining SPI device structures."
}

package CYGPKG_IO_I2C {
        alias           { "Generic I2C support" i2c io_i2c i2c_io }
        directory       io/i2c
        script          i2c.cdl
        hardware
        description "
            The generic I2C package provides an API for accessing devices
            attached to an I2C bus. It specifies how I2C bus drivers should
            be written and how I2C devices should be defined. There is also
            support for bit-banged I2C buses."
}

package CYGPKG_DEVS_I2C_MCF52xx {
        alias           { "MCF52xx I2C driver" devs_i2c_mcf52xx mcf52xx_i2c_driver }
        hardware
        directory       devs/i2c/m68k/mcf52xx
        script          i2c_mcf52xx.cdl
        description "
            This packages provides an I2C driver for the on-chip
                device provided by the MCF52xx coldfire processor family."
}

package CYGPKG_DEVS_I2C_ARM_LPC2XXX {
    alias           { "LPC2xxx I2C driver" }
    hardware
    directory       devs/i2c/arm/lpc2xxx
    script          i2c_lpc2xxx.cdl
    description "This package provides a driver for the I2C unit of the LPC2xxx
                 controller family."
}

package CYGPKG_DEVS_I2C_CORTEXM_LM3S {
    alias        { "Stellaris Cortex-M3 I2C driver" lm3s_i2c lm3s_i2c_driver i2c_lm3s}
    hardware
    directory    devs/i2c/cortexm/lm3s
    script       i2c_lm3s.cdl
    description  "
        This package provides a driver for the I2C unit of the Stellaris
        Cortex-M3 controller family."
}

package CYGPKG_DEVS_I2C_CORTEXM_A2FXXX {
    alias           { "Cortex-M3/Actel Smartfusion (A2Fxxx) I2C driver" a2fxxx_i2c a2fxxx_i2c_driver i2c_a2fxxx}
    hardware
    directory       devs/i2c/cortexm/a2fxxx
    script          i2c_a2fxxx.cdl
    description "This package provides a driver for the I2C peripheral of the Actel Smartfusion (A2Fxxx)
                 controller family."
}

package CYGPKG_DEVS_ADC_ARM_LPC24XX {
    alias           { "LPC24xx ADC driver" }
    hardware
    directory       devs/adc/arm/lpc24xx
    script          adc_lpc24xx.cdl
    description "
            This packages provides an ADC driver for the on-chip
            ADC provided by the LPC24xx processor family."
}

package CYGPKG_DEVS_ADC_ARM_AT91 {
    alias           { "AT91 ADC driver" }
    hardware
    directory       devs/adc/arm/at91
    script          adc_at91.cdl
    description "
            This packages provides an ADC driver for the on-chip
            ADC provided by the Atmel AT91 processor family."
}

package CYGPKG_DEVS_ADC_CORTEXM_LM3S {
    alias         { "Stellaris Cortex M3 ADC driver" lm3s_adc }
    hardware
    directory     devs/adc/cortexm/lm3s
    script        adc_lm3s.cdl
    description   "
        This packages provides an ADC driver for the on-chip ADC provided
        by the Stellaris Cortex M3 controller family."
}

package CYGPKG_DEVS_ADC_SYNTH {
    alias         { "Synthethic ADC driver" adc_synth }
    hardware
    directory     devs/adc/synth
    script        adc_synth.cdl
    description "
            This package provides an ADC driver for the Synthethic target."
}

package CYGPKG_IO_ADC {
        alias           { "Generic ADC support" adc io_adc }
        directory       io/adc
        script          io_adc.cdl
        description "
           This package contains drivers for basic I/O services on
           adc devices."
}

package CYGPKG_KERNEL {
        alias           { "eCos kernel" kernel }
        directory       kernel
        script          kernel.cdl
        description "
This package contains the core functionality of the eCos kernel. It
relies on functionality provided by various HAL packages and by the
eCos infrastructure. In turn the eCos kernel provides support for
other packages such as the device drivers and the uITRON compatibility
layer."
}

package CYGPKG_MEMALLOC {
        alias           { "Dynamic memory allocation" memalloc malloc }
        directory       services/memalloc/common
        script          memalloc.cdl
        description "
This package provides memory allocator infrastructure required for
dynamic memory allocators, including the ISO standard malloc
interface. It also contains some sample implementations."
}

package CYGPKG_LOADER {
        alias           { "Dynamic loader" loader dload }
        directory       services/loader
        script          loader.cdl
        description "
This package provides support for the dynamic executable and
library loader."
}

package CYGPKG_OBJLOADER {
        alias           { "Object file loader" objloader }
        directory       services/objloader
        script          objloader.cdl
        description "
This package provides support for the object file loader and relocator."
}

package CYGPKG_COMPRESS_ZLIB {
        alias           { "Zlib compress/decompress" zlib_compress compress_zlib zlib }
        directory       services/compress/zlib
        script          compress_zlib.cdl
        description "
This package provides zlib compression and decompression support."
}

package CYGPKG_POWER {
        alias           { "Power Management support" power }
        directory       services/power/common
        script          power.cdl
        description "
This package provides some generic support for power management."
}

package CYGPKG_CRC {
        alias           { "CRC support" crc }
        directory       services/crc
        script          crc.cdl
        description "
This package provides support for CRC functions, including the 
POSIX 1003 defined CRC algorithm."
}  

package CYGPKG_CPULOAD {
        alias           { "cpuload support" cpuload }
        directory       services/cpuload
        script          cpuload.cdl
        description "
This package measures the CPU load over the last 100ms, 1second 
and 10 second. All loads are returned as a percentage, ie 0-100.
This is only a rough measure."
}     

package CYGPKG_PROFILE_GPROF {
        alias           { "Application profile support" profile_gprof gprof_profile }
        directory       services/profile/gprof
        script          profile_gprof.cdl
        description "
This package instruments applications to collect profiling data,
using a methodology compatible with the gprof utility."
}     
                  
package CYGPKG_EZXML {
        alias           { "ezXML" XML ezxml }
        directory       services/ezxml
        script          ezxml.cdl
        description     "ezXML, Simple XML Parser"
}
                 
package CYGPKG_PDCURSES {
        alias           { "PDCurses" pdcurses }
        directory       services/curses/pdcurses
        script          pdcurses.cdl
        description     "Public Domain Curses."
}

package CYGPKG_UITRON {
        alias           { "uITRON compatibility" uitron }
        directory       compat/uitron
        script          uitron.cdl
        description "
eCos supports a uITRON Compatibility Layer, providing full Level S
(Standard) compliance with Version 3.02 of the uITRON Standard, plus
many Level E (Extended) features. uITRON is the premier Japanese
embedded RTOS standard."
}

package CYGPKG_ISOINFRA {
        alias           { "ISO C and POSIX infrastructure" isoinfra }
        directory       isoinfra
        script          isoinfra.cdl
        description "
eCos supports implementations of ISO C libraries and POSIX implementations.
This package provides infrastructure used by all such implementations."
}

package CYGPKG_POSIX {
        alias           { "POSIX compatibility" posix }
        directory       compat/posix
        script          posix.cdl
        description "
This package enables compatibility with the ISO/IEEE 1003.1 POSIX
standard.  This allows the user application to use a well known
standard API, and starts a thread to invoke the user function
main()"
}

package CYGPKG_LIBC {
        alias           { "C library" libc clib clibrary }
        directory       language/c/libc/common
        script          libc.cdl
        description  "
The packages under this package enable compatibility with the ISO C
standard - ISO/IEC 9899:1990. This allows the user application to use
well known standard C library functions, and in eCos starts a thread
to invoke the user function main(). This package is a top-level placeholder
to contain the implementations."
}

package CYGPKG_LIBC_I18N {
        alias           { "ISO C library internationalization" libc_i18n }
        directory       language/c/libc/i18n
        script          i18n.cdl
        description  "
This package provides internationalization functions specified by the
ISO C standard - ISO/IEC 9899:1990."
}

package CYGPKG_LIBC_SETJMP {
        alias           { "ISO C library non-local jumps" libc_setjmp }
        directory       language/c/libc/setjmp
        script          setjmp.cdl
        description  "
This package provides non-local jump functionality specified by the
ISO C standard - ISO/IEC 9899:1990."
}

package CYGPKG_LIBC_SIGNALS {
        alias           { "ISO C library signals" libc_signals }
        directory       language/c/libc/signals
        script          signals.cdl
        description   "
This component controls signal functionality, as implemented in
ISO/IEC 9899:1990 chapter 7.7 with the signal() and raise() functions.
As well as allowing a program to send itself signals, it is also
possible to cause hardware exceptions to be signalled to the program
in a similar way."
}

package CYGPKG_LIBC_STARTUP {
        alias           { "ISO environment startup/termination" libc_startup }
        directory       language/c/libc/startup
        script          startup.cdl
        description   "
            This package manages the control of the
            environment (in the general sense) that an
            application would require for full ISO C / POSIX
            compatibility, including a main() entry point
            supplied with arguments and an environment
            (as retrievable by the getenv() function).
            It also includes at the other end of things,
            what happens when main() returns or exit() is
            called."
}

package CYGPKG_LIBC_STDIO {
        alias           { "ISO C library standard input/output functions" libc_stdio }
        directory       language/c/libc/stdio
        script          stdio.cdl
        description  "
This package provides standard input/output functions associated
with the header file <stdio.h> as specified by the
ISO C standard - ISO/IEC 9899:1990."
}

package CYGPKG_LIBC_STDLIB {
        alias           { "ISO C library general utility functions" libc_stdlib }
        directory       language/c/libc/stdlib
        script          stdlib.cdl
        description  "
This package provides general utility functions associated
with the header file <stdlib.h> as specified by the
ISO C standard - ISO/IEC 9899:1990."
}

package CYGPKG_LIBC_STRING {
        alias           { "ISO C library string functions" libc_string }
        directory       language/c/libc/string
        script          string.cdl
        description  "
This package provides string functions specified by the ISO C standard
- ISO/IEC 9899:1990."
}

package CYGPKG_LIBC_TIME {
        alias           { "ISO C library date/time functions" libc_time }
        directory       language/c/libc/time
        script          time.cdl
        description  "
This package provides date and time manipulation functionality specified
by the ISO C standard - ISO/IEC 9899:1990."
}

package CYGPKG_LIBM {
        alias           { "Math library" libm mathlib mathlibrary }
        directory       language/c/libm
        script          libm.cdl
        description  "
ISO standard floating point mathematical library containing many
useful functions for mathematical calculations."
}

package CYGPKG_USTL {
        alias           { "uSTL library" ustl }
        directory       language/cxx/ustl
        script          ustl.cdl
        description  "
This package provides the uSTL library. uSTL is a 
partial implementation of the STL specification intended to 
reduce code size of the derivative programs. This allows the 
user application to use well known standard C++ STL library 
containers, streams, iterators, algorithms and functors."
}

package CYGPKG_ERROR {
        alias           { "Common error code support" error errors }
        directory       error
        script          error.cdl
        description  "
This package contains the common list of error and status codes. It is
held centrally to allow packages to interchange error codes and status
codes in a common way, rather than each package having its own
conventions for error/status reporting. The error codes are modelled
on the POSIX style naming e.g. EINVAL etc. This package also provides
the standard strerror() function to convert error codes to textual
representation, as well as an implementation of the errno idiom."
}
package CYGPKG_CYGMON {
    alias           { "CygMon support via eCos" cygmon }
    directory       cygmon
    script          cygmon.cdl
    description     "
        This package supports the CygMon \[stand-alone debug monitor\]
        using eCos as the underlying board support mechanism."
}

package CYGPKG_REDBOOT {
    alias           { "RedBoot ROM monitor" redboot }
    directory       redboot
    script          redboot.cdl
    description     "
        This package creates the RedBoot \[stand-alone bootstrap & debug monitor\]
        using eCos as the underlying board support mechanism."
}

package CYGPKG_MICROWINDOWS {
        alias           { "Microwindows" mw }
        directory       services/gfx/mw
        script          microwindows.cdl
        description     "Microwindows."
}

package CYGPKG_HAL_SH_SH7750_DREAMCAST {
        alias           { "SEGA Dreamcast" hal_sh_dreamcast sh_dreamcast_hal }
        directory       hal/sh/dreamcast
        script          hal_sh_sh7750_dreamcast.cdl
        hardware
        description "
           This SH HAL package provides the support needed to run
           eCos on SEGA Dreamcast."
}

# --------------------------------------------------------------------------
# ARM packages
package CYGPKG_HAL_ARM {
        alias           { "ARM common HAL" hal_arm arm_hal arm_arch_hal }
        directory       hal/arm/arch
        script          hal_arm.cdl
        hardware
        description "
The ARM architecture HAL package provides generic support for this
processor architecture. It is also necessary to select a specific
target platform HAL package."
}

package CYGPKG_HAL_ARM_PID {
        alias           { "ARM development board (PID)" hal_arm_pid arm_pid_hal }
        directory       hal/arm/pid
        script          hal_arm_pid.cdl
        hardware
        description "
The pid HAL package provides the support needed to run eCos on a ARM
PID eval board."
}

package CYGPKG_HAL_ARM_AEB {
        alias           { "ARM evaluation board (AEB-1)" hal_arm_aeb arm_aeb_hal }
        directory       hal/arm/aeb
        script          hal_arm_aeb.cdl
        hardware
        description "
The aeb HAL package provides the support needed to run eCos on a ARM
AEB-1 eval board."
}

package CYGPKG_HAL_ARM_E7T {
        alias           { "ARM Evaluator7T board (AEB-2)" hal_arm_e7t arm_e7t_hal }
        directory       hal/arm/e7t
        script          hal_arm_e7t.cdl
        hardware
        description "
The e7t HAL package provides the support needed to run eCos on a ARM
Evaluator7T board (aka the AEB-2)."
}

package CYGPKG_HAL_ARM_INTEGRATOR {
        alias           { "ARM development board (INTEGRATOR)" hal_arm_integrator arm_integrator_hal }
        directory       hal/arm/integrator
        script          hal_arm_integrator.cdl
        hardware
        description "
        The INTEGRATOR HAL package provides the support needed to 
        run eCos on a ARM INTEGRATOR eval board."
}

package CYGPKG_HAL_ARM_AT91 {
        alias           { "Atmel AT91 variant HAL" hal_arm_at91 arm_at91_hal }
        directory       hal/arm/at91/var
        script          hal_arm_at91.cdl
        hardware
        description "
        The at91 HAL package provides the support needed to run eCos on Atmel
        AT91 based targets."
}

package CYGPKG_HAL_ARM_AT91_JTST {
        alias           { "Atmel AT572D740 (diopsis) evaluation board (jtst)" hal_arm_at91_jtst arm_at91_jtst_hal }
        directory       hal/arm/at91/jtst
        script          hal_arm_at91_jtst.cdl
        hardware
        description "
        The JTST HAL package provides the support needed to run eCos on 
        the Atmel evaluation board AT572D74-DK1."
}

package CYGPKG_HAL_ARM_AT91SAM7 {
        alias           { "Atmel AT91SAM7" hal_arm_at91sam7 arm_at91_sam7 }
        directory       hal/arm/at91/at91sam7s
        script          hal_arm_at91sam7s.cdl
        hardware
        description "
        The at91sam7 HAL package provides the support needed to run eCos on 
        an Atmel AT91SAM7 family of CPUs."
}

package CYGPKG_HAL_ARM_AT91SAM7SEK {
        alias           { "Atmel AT91SAM7S" hal_arm_at91sam7sek arm_at91_sam7sek }
        directory       hal/arm/at91/at91sam7sek
        script          hal_arm_at91sam7sek.cdl
        hardware
        description "
        The at91sam7sek HAL package provides the support needed to run eCos on 
        an Atmel AT91SAM7S-EK development board."
}

package CYGPKG_HAL_ARM_AT91SAM7XEK {
        alias           { "Atmel AT91SAM7X" hal_arm_at91sam7xek arm_at91_sam7xek }
        directory       hal/arm/at91/at91sam7xek
        script          hal_arm_at91sam7xek.cdl
        hardware
        description "
        The at91sam7xek HAL package provides the support needed to run eCos on 
        an Atmel AT91SAM7X-EK development board."
}

package CYGPKG_HAL_ARM_SAM7EX256 {
        alias           { "Olimex SAM7EX256" hal_arm_sam7ex256 arm_sam7_ex256 }
        directory       hal/arm/at91/sam7ex256
        script          hal_arm_sam7ex256.cdl
        hardware
        description "
        The SAM7EX256 HAL package provides the support needed to run eCos on 
        an Olimex SAM7-EX256 development board."
}

package CYGPKG_HAL_ARM_AT91_EB40 {
        alias           { "Atmel evaluation board (EB40)" hal_arm_at91_eb40 arm_at91_eb40_hal }
        directory       hal/arm/at91/eb40
        script          hal_arm_at91_eb40.cdl
        hardware
        description "
        The eb40 HAL package provides the support needed to run eCos on an Atmel
        evaluation board (EB40)."
}

package CYGPKG_HAL_ARM_AT91_EB40A {
        alias           { "Atmel evaluation board (EB40A)" hal_arm_at91_eb40a arm_at91_eb40a_hal }
        directory       hal/arm/at91/eb40a
        script          hal_arm_at91_eb40a.cdl
        hardware
        description "
        The eb40a HAL package provides the support needed to run eCos on an Atmel
        evaluation board (EB40A)."
}

package CYGPKG_HAL_ARM_AT91_EB42 {
        alias           { "Atmel evaluation board (EB42)" hal_arm_at91_eb42 arm_at91_eb42_hal }
        directory       hal/arm/at91/eb42
        script          hal_arm_at91_eb42.cdl
        hardware
        description "
        The eb42 HAL package provides the support needed to run eCos on an Atmel
        evaluation board (EB42)."
}

package CYGPKG_HAL_ARM_AT91_EB55 {
        alias           { "Atmel evaluation board (EB55)" hal_arm_at91_eb55 arm_at91_eb55_hal }
        directory       hal/arm/at91/eb55
        script          hal_arm_at91_eb55.cdl
        hardware
        description "
        The eb55 HAL package provides the support needed to run eCos on an 
        Atmel evaluation board (EB55)."
}

package CYGPKG_HAL_ARM_AT91_PHYCORE {
        alias           { "PHYTEC evaluation board (phyCORE AT91M55800A)" hal_arm_at91_phycore arm_at91_phycore_hal }
        directory       hal/arm/at91/phycore
        script          hal_arm_at91_phycore.cdl
        hardware
        description "
        The phyCORE HAL package provides the support needed to run eCos on 
        an PHYTEC evaluation board (phyCORE AT91M55800A based on HD200)."
} 

package CYGPKG_HAL_ARM_LPC2XXX {
        alias           { "Philips LPC2XXX variant HAL" hal_arm_lpc2xxx arm_lpc2xxx_hal }
        directory       hal/arm/lpc2xxx/var
        script          hal_arm_lpc2xxx.cdl
        hardware
        description "
        The LPC2XXX HAL package provides the support needed to run eCos on
        Philips LPC2XXX based targets."
}

package CYGPKG_HAL_ARM_LPC24XX {
        alias           { "NXP LPC24XX variant HAL" hal_arm_lpc24xx arm_lpc24xx_hal }
        directory       hal/arm/lpc24xx/var
        script          hal_arm_lpc24xx.cdl
        hardware
        description "
        The LPC24XX HAL package provides the support needed to run eCos on
        NXP LPC24XX based targets."
}

package CYGPKG_HAL_ARM_LPC2XXX_MCB2100 {
        alias           { "Keil evaluation board MCB2100 " hal_mcb2100_arm }
        directory       hal/arm/lpc2xxx/mcb2100
        script          hal_arm_lpc2xxx_mcb2100.cdl
        hardware
        description "
        The mcb2100 HAL package provides the support needed to run eCos on an 
        the MCB2100 evaluation board from Keil."
}

package CYGPKG_HAL_ARM_LPC2XXX_P2106 {
        alias           { "Olimex evaluation board LPC-P2106 " hal_p2106_arm }
        directory       hal/arm/lpc2xxx/p2106
        script          hal_arm_lpc2xxx_p2106.cdl
        hardware
        description "
        The p2106 HAL package provides the support needed to run eCos on an the
        LPC-2106 evaluation board from Olimex."
}

package CYGPKG_HAL_ARM_LPC2XXX_PHYCORE229X {
        alias           { "phyCORE-LPC229x development board" arm_lpc2xxx_phycore229x }
        directory       hal/arm/lpc2xxx/phycore229x
        script          hal_arm_lpc2xxx_phycore229x.cdl
        hardware
        description "
            The Phycore HAL package provides the support needed to run eCos 
            on a Phytec phyCORE-LPC229x development board."
}

package CYGPKG_HAL_ARM_LPC24XX_EA2468 {
        alias           { "Embedded Artists LPC2468 OEM board" arm_lpc2xxx_ea2468 }
        directory       hal/arm/lpc24xx/ea2468
        script          hal_arm_lpc24xx_ea2468.cdl
        hardware
        description "
            The Embedded Artists LPC2468 HAL package provides the support needed 
            to run eCos on a Embbeded Artists LPC2468 OEM board."
}

package CYGPKG_HAL_ARM_LPC2XXX_LPCMT {
        alias           { "Olimex evaluation board LPC-MT " hal_lpcmt_arm }
        directory       hal/arm/lpc2xxx/lpcmt
        script          hal_arm_lpc2xxx_lpcmt.cdl
        hardware
        description "
        The lpcmt HAL package provides the support needed to run eCos on an the 
        LPC-MT evaluation board from Olimex."
}

package CYGPKG_HAL_ARM_LPC2XXX_OLPCH2294 {
        alias           { "Olimex LPC-H2294 header board" hal_olpch2294_arm }
        directory       hal/arm/lpc2xxx/olpch2294
        script          hal_arm_lpc2xxx_olpch2294.cdl
        hardware
        description "
            The olpch2294 HAL package provides the support needed to
            run eCos on the Olimex LPC-H2294 header board."
}

package CYGPKG_HAL_ARM_LPC2XXX_OLPCE2294 {
        alias           { "Olimex LPC-E2294 development board" hal_olpce2294_arm }
        directory       hal/arm/lpc2xxx/olpce2294
        script          hal_arm_lpc2xxx_olpce2294.cdl
        hardware
        description "
            The olpce2294 HAL package provides the support needed to
            run eCos on Olimex LPC-E2294 development board."
}

package CYGPKG_HAL_ARM_LPC2XXX_OLPCL2294 {
        alias           { "Olimex LPC-L2294-1MB development board" hal_olpcl2294_arm }
        directory       hal/arm/lpc2xxx/olpcl2294
        script          hal_arm_lpc2xxx_olpcl2294.cdl
        hardware
        description "
            The olpcl2294 HAL package provides the support needed to run
            eCos on Olimex LPC-L2294-1MB development board."
}

package CYGPKG_HAL_ARM_MAC7100 {
        alias           { "Freescale MAC7100 variant HAL" hal_arm_mac7100 arm_mac7100_hal }
        directory       hal/arm/mac7100/var
        script          hal_arm_mac7100.cdl
        hardware
        description "
        The mac7100 HAL package provides the support needed to run eCos on Freescale
        MAC7100 based targets."
}

package CYGPKG_HAL_ARM_MAC7100_MACE1 {
        alias           { "MAC7100 evaluation board (MACE1)" hal_arm_mac7100_mace1 arm_mac7100_mace1_hal }
        directory       hal/arm/mac7100/mace1
        script          hal_arm_mac7100_mace1.cdl
        hardware
        description "
        The MACE1 HAL package provides the support needed to run eCos on an 
        MAC7100 evaluation board (MACE1)."
}

package CYGPKG_HAL_ARM_MAC7100_MAC7100EVB {
        alias           { "MAC7100EVB evaluation board (Freescale)" hal_arm_mac7100_mac7100evb arm_mac7100_mac7100evb_hal }
        directory       hal/arm/mac7100/mac7100evb
        script          hal_arm_mac7100_mac7100evb.cdl
        hardware
        description "
        The MAC7100EVB HAL package provides the support needed to run eCos on an 
        MAC7100 evaluation board (MAC7100EVB)."
}

package CYGPKG_HAL_ARM_EBSA285 {
        alias           { "Intel EBSA285 StrongARM board" hal_arm_ebsa285 arm_ebsa285_hal }
        directory       hal/arm/ebsa285
        script          hal_arm_ebsa285.cdl
        hardware
        description "
        The EBSA285 HAL package provides the support needed to run
        eCos on a Intel EBSA285 StrongARM eval board."
}

package CYGPKG_HAL_ARM_ARM9 {
        alias           { "ARM9 variant" hal_arm_arm9 }
        directory       hal/arm/arm9/var
        script          hal_arm_arm9.cdl
        hardware
        description "
        The ARM9 HAL package provides the support needed to run
        eCos on a ARM9 based systems."
}


package CYGPKG_HAL_ARM_ARM9_AAED2000 {
        alias           { "Agilent AAED2000 unit" hal_arm_arm9_aaed }
        directory       hal/arm/arm9/aaed2000
        script          hal_arm_arm9_aaed2000.cdl
        hardware
        description "
        The AAED2000 HAL package provides the support needed to run
        eCos on an Agilent AAED2000 board."
}

package CYGPKG_HAL_ARM_ARM9_EXCALIBUR {
        alias           { "Altera Excalibur ARM9 board" hal_arm_arm9_excalibur }
        directory       hal/arm/arm9/excalibur
        script          hal_arm_arm9_excalibur.cdl
        hardware
        description "
        The Excalibur HAL package provides the support needed to run
        eCos on an Altera Excalibur ARM9 board."
}

package CYGPKG_HAL_ARM_ARM9_SMDK2410 {
        alias           { "Samsung ARM9/SMDK2410 development board" hal_arm_arm9_smdk2410 }
        directory       hal/arm/arm9/smdk2410
        script          hal_arm_arm9_smdk2410.cdl
        hardware
        description "
        The SMDK2410 HAL package provides the support needed to run
        eCos on Samsung SMDK2410 and S3c2410x (ARM9) based development boards."
}

package CYGPKG_HAL_ARM_ARM9_INNOVATOR {
        alias           { "Innovator (ARM)" hal_arm_arm9_innovator }
        directory       hal/arm/arm9/innovator
        script          hal_arm_arm9_innovator.cdl
        hardware
        description "
        The Innovator HAL package provides the support needed to run
        RedBoot on the ARM processor of the Innovator.
        
        NOTE: Full support for eCos is not provided yet.  This HAL
        contains only the minimum amount necessary to run RedBoot
        on the Innovator.  In particular, interrupts are not yet
        supported.  Watch this space for more details in the near
        future."
}

package CYGPKG_HAL_ARM_SA11X0 {
        alias           { "Intel SA11X0 Chipset" hal_arm_sa11x0 }
        directory       hal/arm/sa11x0/var
        script          hal_arm_sa11x0.cdl
        hardware
        description "
        The SA11X0 HAL package provides the support needed to run
        eCos on a Intel StrongARM SA11X0 based systems."
}

package CYGPKG_HAL_ARM_SA11X0_ASSABET {
        alias           { "Intel SA1110 Assabet eval board" hal_arm_sa11x0_assabet }
        directory       hal/arm/sa11x0/assabet
        script          hal_arm_sa11x0_assabet.cdl
        hardware
        description "
        The ASSABET HAL package provides the support needed to run
        eCos on a Intel StrongARM SA1110 evaluation board (assabet)."
}

package CYGPKG_HAL_ARM_SA11X0_CERF {
        alias           { "Intrinsyc Cerf board" hal_arm_sa11x0_cerf }
        directory       hal/arm/sa11x0/cerf
        script          hal_arm_sa11x0_cerf.cdl
        hardware
        description "
        The CERF HAL package provides the support needed to run
        eCos on a Intrinsyc StrongARM SA1110 Cerf board."
}

package CYGPKG_HAL_ARM_SA11X0_CERFPDA {
        alias           { "Intrinsyc Cerfpda" hal_arm_sa11x0_cerfpda }
        directory       hal/arm/sa11x0/cerfpda
        script          hal_arm_sa11x0_cerfpda.cdl
        hardware
        description "
        The CERFPDA HAL package provides the support needed to run
        eCos on a Intrinsyc StrongARM SA1110 Cerfpda."
}

package CYGPKG_HAL_ARM_SA11X0_IPAQ {
        alias           { "Compaq iPAQ Pocket PC" hal_arm_sa11x0_ipaq }
        directory       hal/arm/sa11x0/ipaq
        script          hal_arm_sa11x0_ipaq.cdl
        hardware
        description "
        The IPAQ HAL package provides the support needed to run
        eCos on a Intel StrongARM SA1110 pocket PC (Compaq iPAQ)."
}

package CYGPKG_HAL_ARM_SA11X0_FLEXANET {
      alias           { "SA1110 Flexanet board" hal_arm_sa11x0_flexanet }
      directory       hal/arm/sa11x0/flexanet
      script          hal_arm_sa11x0_flexanet.cdl
      hardware
      description "
        The FLEXANET HAL package provides the support needed to run
        eCos on an SA1110 Flexanet board."
}

package CYGPKG_HAL_ARM_SNDS {
      alias       { "Samsung SNDS" hal_arm_snds arm_snds_hal}
      directory   hal/arm/snds
      script      hal_arm_snds.cdl
      hardware
      description "
          The SNDS HAL package provides the support needed to run eCos on a
          Samsung SNDS eval board"
}

package CYGPKG_DEVS_ETH_SMSC_LAN91CXX {
        alias           { "SMSC LAN91CXX ethernet driver" lan91cxx_eth_driver lan9000_eth_driver }
        hardware
        directory       devs/eth/smsc/lan91cxx
        script          smsc_lan91cxx_eth_drivers.cdl
        description     "Ethernet driver for SMSC LAN91CXX (LAN9000) controller."
}


package CYGPKG_HAL_ARM_SA11X0_NANO {
        alias           { "Intel SA1110 nanoEngine eval board" hal_arm_sa11x0_nano }
        directory       hal/arm/sa11x0/nano
        script          hal_arm_sa11x0_nano.cdl
        hardware
        description "
        The nanoEngine HAL package provides the support needed to run
        eCos on the Bright Star Engineering nanoEngine StrongARM SA1110 board."
}

package CYGPKG_DEVS_ETH_ARM_NANO {
        alias           { "BSE nanoEngine with 82559 ethernet driver"
                           devs_eth_arm_nano nano_eth_driver }
        hardware
        directory       devs/eth/arm/nano
        script          nano_eth_drivers.cdl
        description     "Ethernet driver for SA11x0 nanoEngine with Intel
                         i82559 ethernet interfaces."
}

package CYGPKG_HAL_ARM_SA11X0_BRUTUS {
        alias           { "Intel SA1100 Brutus eval board" hal_arm_sa11x0_brutus }
        directory       hal/arm/sa11x0/brutus
        script          hal_arm_sa11x0_brutus.cdl
        hardware
        description "
        The BRUTUS HAL package provides the support needed to run
        eCos on a Intel StrongARM SA1110 evaluation board (brutus)."
}

package CYGPKG_HAL_ARM_SA11X0_SA1100MM {
        alias           { "Intel SA1100 Multimedia eval board" hal_arm_sa11x0_sa1100mm }
        directory       hal/arm/sa11x0/sa1100mm
        script          hal_arm_sa11x0_sa1100mm.cdl
        hardware
        description "
        The MULTIMEDIA HAL package provides the support needed to run
        eCos on a Intel StrongARM SA1110 Multimedia evaluation board."
}

package CYGPKG_HAL_ARM_EDB7XXX {
        alias           { "Cirrus Logic ARM7 based development boards" hal_arm_edb7xxx arm_edb7xxx_hal }
        directory       hal/arm/edb7xxx
        script          hal_arm_edb7xxx.cdl
        hardware
        description "
The EDB7XXX HAL package provides the support needed to run eCos on Cirrus Logic CL-PS7111 and EP7xxx based development boards."
}

package CYGPKG_HAL_ARM_CMA230 {
        alias           { "Cogent CMA230/222 board" hal_arm_cma230 arm_cma230_hal }
        directory       hal/arm/cma230
        script          hal_arm_cma230.cdl
        hardware
        description "
The cma230 HAL package provides the support needed to run eCos on a Cogent 
CMA230 (ARM7TDMI) or CMA222 (ARM710T) eval board."
}

package CYGPKG_HAL_ARM_AIM711 {
      alias       { "ARM Industial Module AIM 711" hal_arm_aim711 arm_aim711_hal}
      directory   hal/arm/aim711
      script      hal_arm_aim711.cdl
      hardware
      description "
          The ARM Industial Module AIM 711 HAL package provides the support
          needed to run eCos on a ARM Industial Module AIM 711 from
          Vision Systems GmbH."
}

package CYGPKG_HAL_ARM_XSCALE_CORE {
        alias           { "Intel XScale Core" hal_arm_xscale_core }
        directory       hal/arm/xscale/cores
        script          hal_arm_xscale_core.cdl
        hardware
        description "
        The XScale core HAL package provides the support needed to run eCos
        on all Intel XScale based systems."
}

package CYGPKG_HAL_ARM_XSCALE_IOP310 {
        alias           { "Intel IOP8310 (IQ80200/IQ80310) XScale chipset" hal_arm_iop310 arm_iop310_hal }
        directory       hal/arm/xscale/iop310
        script          hal_arm_xscale_iop310.cdl
        hardware
        description "
        The IOP310 HAL package provides the support needed to run
        eCos on a system using the Intel XScale IOP310 (IQ80200/80310) chipset."
}

package CYGPKG_HAL_ARM_XSCALE_IQ80310 {
        alias           { "Intel IQ80310 (Cyclone) eval board" hal_arm_xscale_iq80310 hal_arm_xscale_cyclone }
        directory       hal/arm/xscale/iq80310
        script          hal_arm_xscale_iq80310.cdl
        hardware
        description "
        The IQ80310 HAL package provides the support needed to run
        eCos on an Intel Cyclone evaluation board, utilizing an Intel XScale 
        IQ80200/80310 chipset."
}

package CYGPKG_HAL_ARM_XSCALE_NPWR {
        alias           { "NPWR Linux Engine" hal_arm_xscale_npwr }
        directory       hal/arm/xscale/npwr
        script          hal_arm_xscale_npwr.cdl
        hardware
        description "
        The NPWR HAL package provides the support needed to run
        eCos on a NPWR Linux Engine, utilizing an Intel XScale 
        IQ80200/80310 chipset."
}

package CYGPKG_DEVS_ETH_ARM_XSCALE_NPWR {
        alias           { "NPWR Linux Engine ethernet drivers" devs_eth_arm_xscale_npwr }
        hardware
        directory       devs/eth/arm/npwr
        script          npwr_eth_drivers.cdl
        description     "Ethernet drivers for NPWR Linux Engine via 82544 NIC."
}

package CYGPKG_HAL_ARM_XSCALE_VERDE {
        alias           { "Intel XScale 80320 I/O Processor" hal_arm_xscale_verde }
        directory       hal/arm/xscale/verde
        script          hal_arm_xscale_verde.cdl
        hardware
        description "
        The XSCALE HAL package provides the support needed to run
        eCos on Intel 80320 based systems."
}

package CYGPKG_HAL_ARM_XSCALE_IQ80321 {
        alias           { "Intel XScale IQ80321 eval board" hal_arm_xscale_iq80321 }
        directory       hal/arm/xscale/iq80321
        script          hal_arm_xscale_iq80321.cdl
        hardware
        description "
        The IQ80321 HAL package provides the support needed to run
        eCos on an Intel XScale IQ80321 evaluation board."
}

package CYGPKG_HAL_ARM_XSCALE_IXP425 {
        alias           { "Intel XScale IXP425 Network Processor" hal_arm_xscale_ixp425 }
        directory       hal/arm/xscale/ixp425
        script          hal_arm_xscale_ixp425.cdl
        hardware
        description "
        The XScale IXP425 HAL package provides the support needed to run
        eCos on Intel XScale IXP425 network processor based systems."
}

package CYGPKG_HAL_ARM_XSCALE_XSENGINE {
       alias           { "Exys XSEngine" hal_arm_xscale_xsengine }
       directory       hal/arm/xscale/xsengine
       script          hal_arm_xscale_xsengine.cdl
       hardware
       description "
         The XSEngine HAL package provides the support needed to run
         eCos on an Exys XSEngine board."
}

package CYGPKG_HAL_ARM_XSCALE_IXDP425 {
        alias           { "Intel XScale IXDP425 Network Processor eval board" hal_arm_xscale_ixdp425 }
        directory       hal/arm/xscale/ixdp425
        script          hal_arm_xscale_ixdp425.cdl
        hardware
        description "
        The IXDP425 HAL package provides the support needed to run
        eCos on an Intel XScale IXDP425 network processor evaluation board."
}

package CYGPKG_HAL_ARM_XSCALE_GRG {
        alias           { "Intel XScale Generic Residential Gateway" hal_arm_xscale_grg }
        directory       hal/arm/xscale/grg
        script          hal_arm_xscale_grg.cdl
        hardware
        description "
        The GRG HAL package provides the support needed to run eCos on an
        Intel Generic Residential Gateway evaluation board."
}

package CYGPKG_HAL_ARM_XSCALE_PRPMC1100 {
        alias           { "Motorola PrPMC1100 PMC for Intel XScale IXC1100" hal_arm_xscale_prpmc1100 }
        directory       hal/arm/xscale/prpmc1100
        script          hal_arm_xscale_prpmc1100.cdl
        hardware
        description "
        The PrPMC1100 HAL package provides the support needed to run eCos on an
        Motorola PrPMC1100 evaluation board."
}

package CYGPKG_HAL_ARM_XSCALE_PXA2X0 {
        alias           { "Intel PXA2X0" hal_arm_xscale_pxa2x0 }
        directory       hal/arm/xscale/pxa2x0
        script          hal_arm_xscale_pxa2x0.cdl
        hardware
                description "
                The PXA2X0 HAL package provides the support needed to run
                eCos on Intel PXA2X0 based systems."
}

package CYGPKG_HAL_ARM_XSCALE_MPC50 {
        alias           { "MICROPLEX Printer Controller 5.0" hal_arm_xscale_mpc50 }
        directory       hal/arm/xscale/mpc50
        script          hal_arm_xscale_mpc50.cdl
        hardware
        description "
        The MPC50 HAL package provides the support needed to run
        eCos on a MPC 5.0."
}

# --------------------------------------------------------------------------
# SH packages
package CYGPKG_HAL_SH {
        alias           { "SH common HAL" hal_sh sh_hal sh_arch_hal }
        directory       hal/sh/arch
        script          hal_sh.cdl
        hardware
        description "
           The SH (SuperH) architecture HAL package provides generic
           support for this processor architecture. It is also
           necessary to select variant and target platform HAL
           packages."
}

package CYGPKG_HAL_SH_SH2 {
    alias         { "SH2 architecture" hal_sh_sh2 }
    directory     hal/sh/sh2
    script        hal_sh_sh2.cdl
    hardware
    description   "
        The SH2 (SuperH 2) variant HAL package provides generic
        support for SH2 variant CPUs."
}

package CYGPKG_HAL_SH_SH3 {
    alias         { "SH3 architecture" hal_sh_sh3 }
    directory     hal/sh/sh3
    script        hal_sh_sh3.cdl
    hardware
    description   "
        The SH3 (SuperH 3) variant HAL package provides generic
        support for SH3 variant CPUs."
}

package CYGPKG_HAL_SH_SH4 {
    alias         { "SH4 architecture" hal_sh_sh4 }
    directory     hal/sh/sh4
    script        hal_sh_sh4.cdl
    hardware
    description   "
        The SH4 (SuperH 4) variant HAL package provides generic
        support for SH4 variant CPUs."
}

package CYGPKG_HAL_SH_EDK7708 {
        alias           { "Hitachi SH7708 board" hal_sh_edk sh_edk_hal }
        directory       hal/sh/edk7708
        script          hal_sh_edk7708.cdl
        hardware
        description "
           This SH HAL package provides the support needed to run
           eCos on a Hitachi SH3 EDK7708 board."
}

package CYGPKG_HAL_SH_SH7708_CQ7708 {
        alias           { "CqREEK SH7708 board" hal_sh_cq sh_cq_hal }
        directory       hal/sh/cq7708
        script          hal_sh_sh7708_cq7708.cdl
        hardware
        description "
           This SH HAL package provides the support needed to run
           eCos on a CqREEK SH7708 board."
}

package CYGPKG_HAL_SH_SH7750_CQ7750 {
        alias           { "CqREEK SH7750 board" hal_sh_cqsh4 sh_cqsh4_hal }
        directory       hal/sh/cq7750
        script          hal_sh_sh7750_cq7750.cdl
        hardware
        description "
           This SH HAL package provides the support needed to run
           eCos on a CqREEK SH7750 board."
}


package CYGPKG_HAL_SH_SH7729_HS7729PCI {
        alias           { "Hitachi HS7729PCI board" hal_sh_sh7729_hs7729pci sh_sh7729_hs7729pci_hal }
        directory       hal/sh/hs7729pci
        script          hal_sh_sh7729_hs7729pci.cdl
        hardware
        description "
           This SH HAL package provides the support needed to run
           eCos on a Hitachi HS7729PCI board."
}

package CYGPKG_HAL_SH_SH77X9_SE77X9 {
        alias           { "Hitachi SE77x9 board" hal_sh_sh77x9_se77x9 sh_sh77x9_se77x9_hal }
        directory       hal/sh/se77x9
        script          hal_sh_sh77x9_se77x9.cdl
        hardware
        description "
           This SH HAL package provides the support needed to run
           eCos on a Hitachi Solution Engine 77x9 board."
}

package CYGPKG_HAL_SH_SH7751_SE7751 {
        alias           { "Hitachi SE7751 board" hal_sh_sh7751_se7751 sh_sh7751_se7751_hal }
        directory       hal/sh/se7751
        script          hal_sh_sh7751_se7751.cdl
        hardware
        description "
           This SH HAL package provides the support needed to run
           eCos on a Hitachi Solution Engine 7751 board."
}

package CYGPKG_HAL_SH_SH4_202_MD {
    alias         { "SuperH SH4-202 MicroDev CPU Board" hal_sh_sh4_202_md }
    directory     hal/sh/sh4_202_md
    script        hal_sh_sh4_202_md.cdl
    hardware
    description   "
        The SH4-202 HAL package provides generic
        support for the SuperH SH4-202 MicroDev CPU board."
}

# --------------------------------------------------------------------------
# H8/300 packages
package CYGPKG_HAL_H8300 {
        alias           { "Hitachi H8300 common HAL" hal_h8300 h8300_hal}
        directory       hal/h8300/arch
        script          hal_h8300.cdl
        hardware
        description "
The Hitachi H8/300 architecture HAL package provides generic support for this
processor architecture. It is also necessary to select a specific
target platform HAL package."
}

package CYGPKG_HAL_H8300_H8300H {
        alias           { "Hitachi H8300H variant HAL" hal_h8300h h8300h_hal}
        directory       hal/h8300/h8300h
        script          hal_h8300_h8300h.cdl
        hardware
        description "
The H8/300H HAL package provides the support needed to run eCos on a Hitachi
H8/300H processor."
}

package CYGPKG_HAL_H8300_H8S {
        alias           { "Hitachi H8S variant HAL" hal_h8s h8s_hal}
        directory       hal/h8300/h8s
        script          hal_h8300_h8s.cdl
        hardware
        description "
The H8S HAL package provides the support needed to run eCos on a Hitachi
H8S processor."
}

package CYGPKG_HAL_H8300_H8300H_SIM {
        alias           { "H8/300H simulator" hal_h8300h_sim h8300h_sim_hal }
        directory       hal/h8300/sim
        script          hal_h8300_h8300h_sim.cdl
        hardware
        description "
           The minimal simulator HAL package is provided for use when
           only a simple simulation of the processor architecture is
           desired, as opposed to detailed simulation of any specific
           board. In particular it is not possible to simulate any of
           the I/O devices, so device drivers cannot be used."
}

package CYGPKG_HAL_H8300_H8300H_AKI3068NET {
        alias           { "Akizuki H8/3068 board" hal_h8300h_aki3068net h8300h_aki3068net_hal }
        directory       hal/h8300/aki3068net
        script          hal_h8300_h8300h_aki3068net.cdl
        hardware
        description "
           The aki3068net HAL package provides the support needed to run
           eCos on a Akizuki H8/3068 Network micom board." 
}

package CYGPKG_HAL_H8300_H8300H_H8MAX {
        alias           { "H8MAX board" hal_h8300h_h8max h8300h_h8max_hal }
        directory       hal/h8300/h8max
        script          hal_h8300_h8300h_h8max.cdl
        hardware
        description "
           The h8max HAL package provides the support needed to run
           eCos on a H8MAX board." 
}

package CYGPKG_HAL_H8300_H8S_SIM {
        alias           { "H8S simulator" hal_h8s_sim h8s_sim_hal }
        directory       hal/h8300/sim_s
        script          hal_h8300_h8s_sim.cdl
        hardware
        description "
           The minimal simulator HAL package is provided for use when
           only a simple simulation of the processor architecture is
           desired, as opposed to detailed simulation of any specific
           board. In particular it is not possible to simulate any of
           the I/O devices, so device drivers cannot be used."
}

package CYGPKG_HAL_H8300_H8S_EDOSK2674 {
        alias           { "EDOSK-2674 board" hal_h8s_edosk2674 h8s_edosk2674_hal }
        directory       hal/h8300/edosk2674
        script          hal_h8300_h8s_edosk2674.cdl
        hardware
        description "
           The edosk2674 HAL package provides the support needed to run
           eCos on a Hitachi Micro System Europe EDOSK-2674 Evalution board." 
}

# ==========================================================================
# --------------------------------------------------------------------------
# i386 packages
package CYGPKG_HAL_I386 {
        alias           { "i386 common HAL" hal_i386 i386_hal i386_arch_hal }
        directory       hal/i386/arch
        script          hal_i386.cdl
        hardware
        description "
            The i386 architecture HAL package provides generic
            support for this processor architecture. It is also
            necessary to select a specific target platform HAL
            package."
}

package CYGPKG_HAL_I386_GENERIC {
        alias           { "i386 generic target" hal_i386_generic }
        directory       hal/i386/generic
        script          hal_i386_generic.cdl
        hardware
        description "
            The i386 generic Target HAL package provides support
            for generic IA32 processors, from the 80386 to the latest
            Pentium/Athlon."
            
}
package CYGPKG_HAL_I386_PCMB {
        alias           { "i386 PC Motherboard" hal_i386_pcmb }
        directory       hal/i386/pcmb
        script          hal_i386_pcmb.cdl
        hardware
        description "
            The i386 PC Motherboard HAL package provides the 
            support needed to run eCos binaries on a standard i386
            PC motherboard. This is a support package for various
            actual platform specific targets."
}
package CYGPKG_HAL_I386_PC {
        alias           { "i386 PC target" hal_i386_pc }
        directory       hal/i386/pc
        script          hal_i386_pc.cdl
        hardware
        description "
            The i386 PC Target HAL package provides the 
            support needed to run eCos binaries on a standard i386
            PC."
}

# --------------------------------------------------------------------------
# Synthetic target.
package CYGPKG_HAL_SYNTH {
        alias           { "Linux synthetic target" linux }
        directory       hal/synth/arch
        script          hal_synth.cdl
        hardware
        description "
            The Linux Synthetic Target HAL package provides the 
            support needed to run eCos binaries on top of the i386
            Linux kernel."
}

package CYGPKG_HAL_SYNTH_I386 {
        alias           { "Linux/i386 synthetic target" i386_linux }
        directory       hal/synth/i386linux
        script          hal_synth_i386.cdl
        hardware
        description "
            i386 processor-specific support for the Linux synthetic target"
}

# --------------------------------------------------------------------------
# SPARClite packages
package CYGPKG_HAL_SPARCLITE {
        alias           { "SPARClite common HAL" hal_sparclite sparclite_hal sparclite_arch_hal }
        directory       hal/sparclite/arch
        script          hal_sparclite.cdl
        hardware
        description "
            The SPARClite architecture HAL package provides generic support
            for this processor architecture. It is also necessary to select
            a specific target platform HAL package."
}

package CYGPKG_HAL_SPARCLITE_SLEB {
        alias           { "Fujitsu MB86800-MA01 board" hal_sparclite_sleb sparclite_sleb_hal }
        directory       hal/sparclite/sleb
        script          hal_sparclite_sleb.cdl
        hardware
        description "
            The SPARClite evaluation board HAL package is provided for use
            with the Fujitsu MB8683x boards."
}

package CYGPKG_HAL_SPARCLITE_SIM {
        alias           { "SPARClite simulator" hal_sparclite_sim sparclite_sim_hal }
        directory       hal/sparclite/sim
        script          hal_sparclite_sim.cdl
        hardware
        description "
            The SPARClite simulator HAL package is provided for use
            with the SPARClite simulator."
}

# --------------------------------------------------------------------------
# SPARC V7/V8 packages
package CYGPKG_HAL_SPARC {
        alias           { "SPARC V7/V8 common HAL" hal_sparc sparc_hal sparc_arch_hal }
        directory       hal/sparc/arch
        script          hal_sparc.cdl
        hardware
        description "
            The SPARC V7/V8 architecture HAL package provides generic support
            for this processor architecture. It is also necessary to select
            a specific target platform HAL package."
}

package CYGPKG_HAL_SPARC_ERC32 {
        alias           { "ERC32 processor" hal_sparc_erc32 sparc_erc32_hal }
        directory       hal/sparc/erc32
        script          hal_sparc_erc32.cdl
        hardware
        description "
            The ERC32 processor HAL package is provided for use
            with both real hardware and the TSIM/ERC32 simulator."
}

package CYGPKG_HAL_SPARC_LEON {
        alias           { "LEON processor" hal_sparc_leon sparc_leon_hal }
        directory       hal/sparc/leon
        script          hal_sparc_leon.cdl
        hardware
        description "
            The LEON processor HAL package is provided for use
            with both real hardware and the TSIM/LEON simulator."
}

# --------------------------------------------------------------------------
# PowerPC packages
package CYGPKG_HAL_POWERPC {
        alias           { "PowerPC common HAL" hal_powerpc powerpc_hal powerpc_arch_hal }
        directory       hal/powerpc/arch
        script          hal_powerpc.cdl
        hardware
        description "
            The PowerPC architecture HAL package provides generic
            support for this processor architecture. It is also necessary to
            select a CPU variant and a specific target platform HAL
            package."
}

package CYGPKG_HAL_POWERPC_MPC8260 {
        alias           { "PowerPC MPC8260 variant HAL" hal_mpc8260 }
        directory       hal/powerpc/mpc8260/
        script          hal_powerpc_mpc8260.cdl
        hardware
        description "
           The PowerPC MPC8260 PowerQUICCII variant HAL package provides 
           support for this processor variant. It is also necessary to
           select a specific target platform HAL package."
}

package CYGPKG_HAL_POWERPC_MPC8XXX {
        alias           { "PowerPC MPC8XXX variant HAL" hal_mpc8xxx }
        directory       hal/powerpc/mpc8xxx/
        script          hal_powerpc_mpc8xxx.cdl
        hardware
        description "
           The PowerPC MPC8XXX PowerQUICCII variant HAL package provides 
           support for this processor variant. It is also necessary to
           select a specific target platform HAL package."
}

package CYGPKG_HAL_POWERPC_MPC8xx {
        alias           { "PowerPC 8xx variant HAL" hal_mpc8xx mpc8xx_hal mpc8xx_arch_hal }
        directory       hal/powerpc/mpc8xx/
        script          hal_powerpc_mpc8xx.cdl
        hardware
        description "
           The PowerPC 8xx variant HAL package provides generic support
           for this processor variant. It is also necessary to
           select a specific target platform HAL package."
}

package CYGPKG_HAL_POWERPC_PPC60x {
        alias           { "PowerPC 60x variant HAL" hal_ppc60x ppc60x_hal ppc60x_arch_hal }
        directory       hal/powerpc/ppc60x/
        script          hal_powerpc_ppc60x.cdl
        hardware
        description "
           The PowerPC 60x variant HAL package provides generic support
           for this processor variant. It is also necessary to
           select a specific target platform HAL package."
}

package CYGPKG_HAL_POWERPC_MPC5xx {
        alias           { "PowerPC 5xx variant HAL" hal_mpc5xx mpc5xx_hal mpc5xx_arch_hal }
        directory       hal/powerpc/mpc5xx/
        script          hal_powerpc_mpc5xx.cdl
        hardware
        description "
           The PowerPC 5xx variant HAL package provides generic support
           for this processor variant. It is also necessary to
           select a specific target platform HAL package."
}

package CYGPKG_HAL_POWERPC_PPC40x {
        alias           { "PowerPC 40x variant HAL" hal_ppc40x ppc40x_hal ppc40x_arch_hal }
        directory       hal/powerpc/ppc40x/
        script          hal_powerpc_ppc40x.cdl
        hardware
        description "
           The PowerPC 40x variant HAL package provides generic support
           for this processor variant. It is also necessary to
           select a specific target platform HAL package."
}

package CYGPKG_HAL_POWERPC_COGENT {
        alias           { "Cogent CMA286/287 board" hal_powerpc_cogent powerpc_cogent_hal }
        directory       hal/powerpc/cogent
        script          hal_powerpc_cogent.cdl
        hardware
        description "
            The cogent HAL package provides the support needed to run
            eCos on a Cogent board equipped with a PowerPC processor."
}

package CYGPKG_HAL_POWERPC_CME555 {
        alias           { "Axiom's CME555 evaluation board" hal_powerpc_cme555 powerpc_cme555_hal }
        directory       hal/powerpc/cme555
        script          hal_powerpc_cme555.cdl
        hardware
        description "
            The CME555 HAL package provides the support needed to run
            eCos on a CME555 evaluation board from Axiom Manufacturing."
}

package CYGPKG_HAL_POWERPC_EC555 {
        alias           { "Wuerz development board" hal_powerpc_ec555 powerpc_ec555_hal }
        directory       hal/powerpc/ec555
        script          hal_powerpc_ec555.cdl
        hardware
        description "
            The EC555 HAL package provides the support needed to run
            eCos on an EC555 development board from Wuerz elektronik."
}

package CYGPKG_HAL_POWERPC_PATI {
        alias           { "MPL PATI PC/104+ board" hal_powerpc_pati powerpc_pati_hal }
        directory       hal/powerpc/pati
        script          hal_powerpc_pati.cdl
        hardware
        description "
            The PATI HAL package provides the support needed to run
            eCos on an PATI PC/104+ board from MPL elektronik."
}

package CYGPKG_HAL_POWERPC_FADS {
        alias           { "Motorola MPC8xxFADS board" hal_powerpc_fads powerpc_fads_hal }
        directory       hal/powerpc/fads
        script          hal_powerpc_fads.cdl
        hardware
        description "
            The FADS HAL package provides the support needed to run
            eCos on a Motorola FADS board equipped with a PowerPC processor."
}
package CYGPKG_HAL_POWERPC_MBX {
        alias           { "Motorola MBX860/821 board" hal_powerpc_mbx powerpc_mbx_hal }
        directory       hal/powerpc/mbx
        script          hal_powerpc_mbx.cdl
        hardware
        description "
            The MBX HAL package provides the support needed to run
            eCos on a Motorola MBX board equipped with a PowerPC processor."
}

package CYGPKG_HAL_POWERPC_VIPER {
        alias           { "A&M Viper PPC860 board" hal_powerpc_viper powerpc_viper_hal }
        directory       hal/powerpc/viper
        script          hal_powerpc_viper.cdl
        hardware
        description "
            The VIPER HAL package provides the support needed to run
            eCos on a A&M VIPER board equipped with a PowerPC processor."
}

package CYGPKG_HAL_POWERPC_TS6 {
        alias           { "Delphi TigerSHARC-6 board" hal_powerpc_ts6 powerpc_ts6_hal }
        directory       hal/powerpc/ts6
        script          hal_powerpc_ts6.cdl
        hardware
        description "
            The TS6 HAL package provides the support needed to run
            eCos on a Delphi TigerSHARC-6 board equipped with a
            PowerPC processor."
}

package CYGPKG_HAL_POWERPC_VADS {
        alias           { "Motorola MPC8260 VADS board" hal_powerpc_vads powerpc_vads_hal }
        directory       hal/powerpc/vads
        script          hal_powerpc_vads.cdl
        hardware
        description "
            The VADS HAL package provides the support needed to run
            eCos on a Motorola MPC8260 VADS board equipped with a
            PowerPC processor."
}

package CYGPKG_HAL_QUICC {
        alias           { "Motorola MPC8xx QUICC support" hal_quicc quicc_hal quicc }
        directory       hal/powerpc/quicc
        script          hal_powerpc_quicc.cdl
        hardware
        description "
            The QUICC package provides some of the support needed
            to run eCos on a Motorola MPC8xx processors, using the QUICC
            communications subsystem."
}

package CYGPKG_HAL_POWERPC_SIM {
        alias           { "PowerPC simulator" hal_powerpc_sim powerpc_sim_hal }
        directory       hal/powerpc/sim
        script          hal_powerpc_sim.cdl
        hardware
        description "
            The minimal simulator HAL package is provided for use when
            only a simple simulation of the processor architecture is
            desired, as opposed to detailed simulation of any specific
            board. In particular it is not possible to simulate any of
            the I/O devices, so device drivers cannot be used."
}

# --------------------------------------------------------------------------
# MIPS packages

package CYGPKG_HAL_MIPS {
        alias           { "MIPS common HAL" hal_mips mips_hal mips_arch_hal }
        directory       hal/mips/arch/
        script          hal_mips.cdl
        hardware
        description "
            The MIPS architecture HAL package provides generic support
            for this processor architecture. It is also necessary to
            select a CPU variant and a specific target platform HAL
            package."
}

package CYGPKG_HAL_MIPS_SIM {
        alias           { "MIPS simulator" hal_mips_sim mips_sim_hal }
        directory       hal/mips/sim
        script          hal_mips_sim.cdl
        hardware
        description "
           The minimal simulator HAL package is provided for when only
           a simple simulation of the processor architecture is
           desired, as opposed to detailed simulation of any specific
           board. To use this minimal simulator the command
           `target sim --board=jmr3904pal' should be used from inside
           gdb. It is not possible to use any of the eCos device
           drivers when the simulator is running in this mode"
}

package CYGPKG_HAL_MIPS_TX39 {
        alias           { "TX39 chip HAL" hal_tx39 tx39_hal tx39_arch_hal }
        directory       hal/mips/tx39/
        script          hal_mips_tx39.cdl
        hardware
        description "
           The TX39 architecture HAL package provides generic support
           for this processor architecture. It is also necessary to
           select a specific target platform HAL package."
}

package CYGPKG_HAL_MIPS_TX39_JMR3904 {
        alias           { "Toshiba JMR-TX3904 board" hal_tx39_jmr3904 tx39_jmr3904_hal }
        directory       hal/mips/jmr3904
        script          hal_mips_tx39_jmr3904.cdl
        hardware
        description "
           The JMR3904 HAL package should be used when targetting the
           actual hardware. The same package can also be used when
           running on the full simulator, since this provides an
           accurate simulation of the hardware including I/O devices.
           To use the simulator in this mode the command
           `target sim --board=jmr3904' should be used from inside gdb."
}

package CYGPKG_HAL_MIPS_MIPS32 {
        alias           { "MIPS32 HAL" hal_mips32 mips32_hal mips32_arch_hal }
        directory       hal/mips/mips32/
        script          hal_mips_mips32.cdl
        hardware
        description "
           The MIPS 32 architecture HAL package provides generic support
           for this processor architecture. It is also necessary to
           select a specific target platform HAL package."
}

package CYGPKG_HAL_MIPS_MIPS64 {
        alias           { "MIPS64 HAL" hal_mips64 mips64_hal mips64_arch_hal }
        directory       hal/mips/mips64/
        script          hal_mips_mips64.cdl
        hardware
        description "
           The MIPS 64 architecture HAL package provides generic support
           for this processor architecture. It is also necessary to
           select a specific target platform HAL package."
}

package CYGPKG_HAL_MIPS_ATLAS {
        alias           { "MIPS Atlas board" hal_atlas atlas_hal }
        directory       hal/mips/atlas
        script          hal_mips_atlas.cdl
        hardware
        description "
           The Atlas HAL package should be used when targetting the
           actual hardware. "
}
package CYGPKG_HAL_MIPS_MALTA {
        alias           { "MIPS Malta board" hal_malta malta_hal }
        directory       hal/mips/malta
        script          hal_mips_malta.cdl
        hardware
        description "
           The Malta HAL package should be used when targetting the
           actual hardware. "
}

package CYGPKG_HAL_MIPS_TX49 {
        alias           { "TX49 chip HAL" hal_tx49 tx49_hal tx49_arch_hal }
        directory       hal/mips/tx49/
        script          hal_mips_tx49.cdl
        hardware
        description "
           The TX49 architecture HAL package provides generic support
           for this processor architecture. It is also necessary to
           select a specific target platform HAL package."
}

package CYGPKG_HAL_MIPS_TX49_REF4955 {
        alias           { "Toshiba TX4955 reference platform" hal_tx49_ref4955 tx49_ref4955_hal }
        directory       hal/mips/ref4955
        script          hal_mips_tx49_ref4955.cdl
        hardware
        description "
           The REF4955 HAL package should be used when targetting the
           actual hardware."
}

package CYGPKG_HAL_MIPS_RM7000 {
        alias           { "RM7000 chip HAL" hal_rm7000 rm7000_hal rm7000_arch_hal }
        directory       hal/mips/rm7000/var
        script          hal_mips_rm7000.cdl
        hardware
        description "
           The RM7000 architecture HAL package provides generic support
           for this processor architecture. It is also necessary to
           select a specific target platform HAL package."
}

package CYGPKG_HAL_MIPS_RM7000_OCELOT {
        alias           { "PMC-Sierra Ocelot platform" hal_rm7000_ocelot rm7000_ocelot_hal }
        directory       hal/mips/rm7000/ocelot
        script          hal_mips_rm7000_ocelot.cdl
        hardware
        description "
           The Ocelot HAL package should be used when targetting the
           actual hardware."
}

package CYGPKG_HAL_MIPS_VR4300 {
        alias           { "VR4300 chip HAL" hal_vr4300 vr4300_hal vr4300_arch_hal }
        directory       hal/mips/vr4300/
        script          hal_mips_vr4300.cdl
        hardware
        description "
           The VR4300 variant HAL package provides generic support
           for this processor architecture. It is also necessary to
           select a specific target platform HAL package."
}
package CYGPKG_HAL_MIPS_VR4300_VRC4373 {
        alias           { "NEC VRC4373 board" hal_vrc4373 vrc4373_hal }
        directory       hal/mips/vrc4373
        script          hal_mips_vr4300_vrc4373.cdl
        hardware
        description "
           The VRC4373 HAL package should be used when targetting the
           actual hardware."
}

package CYGPKG_HAL_MIPS_VR4300_VRC4375 {
        alias           { "NEC VRC4375 board" hal_vrc4375 vrc4375_hal }
        directory       hal/mips/vrc4375
        script          hal_mips_vr4300_vrc4375.cdl
        hardware
        description "
           The VRC4375 HAL package should be used when targetting the
           actual hardware."
}

package CYGPKG_HAL_MIPS_VR4300_VRC437X {
        alias           { "NEC VRC437X support" hal_vrc437x vrc437x_hal }
        directory       hal/mips/vrc437x
        script          hal_mips_vr4300_vrc437x.cdl
        hardware
        description "
           The VRC437X HAL package should be used when targetting harware
           that contains either a VRC437X companion chip."
}

package CYGPKG_HAL_MIPS_UPD985XX {
        alias           { "upd985xx chip HAL" hal_upd985xx upd985xx_hal upd985xx_arch_hal }
        directory       hal/mips/upd985xx/
        script          hal_mips_upd985xx.cdl
        hardware
        description "
           The UPD985XX variant HAL package provides generic support
           for this NEC system-on-chip processor architecture, uPD985xx.
           It is also necessary to
           select a specific target platform HAL package."
}

package CYGPKG_HAL_MIPS_IDT32334 {
        alias           { "MIPS IDT32334 variant HAL" hal_idt32334 idt32334_hal idt32334_arch_hal }
        directory       hal/mips/idt32334
        script          hal_mips_idt32334.cdl
        hardware
        description "
           The IDT32334 variant HAL package provides generic support
           for platforms based on this variant. It is also necessary to
           select a specific target platform HAL package."
}

package CYGPKG_HAL_MIPS_IDT32334_REFIDT334 {
        alias           { "MIPS IDT79S334A reference platform" hal_idt32334_refIDT334 idt32334_refIDT334_hal }
        directory       hal/mips/idt79s334a
        script          hal_mips_idt32334_refidt334.cdl
        hardware
        description "
           The REFIDT334 HAL package should be used when targetting the
           actual hardware."
}

# --------------------------------------------------------------------------
# MN10300 packages

package CYGPKG_HAL_MN10300 {
        alias           { "MN10300 common HAL" hal_mn10300 mn10300_hal mn10300_arch_hal }
        directory       hal/mn10300/arch
        script          hal_mn10300.cdl
        hardware
        description "
           The MN10300 architecture HAL package provides generic
           support for this processor architecture. It is also
           necessary to select a specific target platform HAL
           package."
}

package CYGPKG_HAL_MN10300_AM31 {
        alias           { "MN10300 AM31 variant HAL" hal_mn10300_am31 mn10300_am31_hal }
        directory       hal/mn10300/am31
        script          hal_mn10300_am31.cdl
        hardware
        description "
           The MN10300 AM31 variant HAL package provides generic
           support for this processor architecture. It is also
           necessary to select a specific target platform HAL
           package."
}

package CYGPKG_HAL_MN10300_AM31_SIM {
        alias           { "MN10300 simulator" hal_mn10300_sim mn10300_sim_hal }
        directory       hal/mn10300/sim
        script          hal_mn10300_am31_sim.cdl
        hardware
        description "
           The minimal simulator HAL package is provided for use when
           only a simple simulation of the processor architecture is
           desired, as opposed to detailed simulation of any specific
           board. In particular it is not possible to simulate any of
           the I/O devices, so device drivers cannot be used."
}

package CYGPKG_HAL_MN10300_AM31_STDEVAL1 {
        alias           { "Matsushita stdeval1 board" hal_mn10300_stdeval1 mn10300_stdeval1_hal }
        directory       hal/mn10300/stdeval1
        script          hal_mn10300_am31_stdeval1.cdl
        hardware
        description "
           The stdeval1 HAL package should be used when targetting the
           actual hardware. The same package can also be used when
           running on the full MN10300 simulator, since this provides
           an accurate simulation of the full hardware including I/O
           devices."
}
package CYGPKG_HAL_MN10300_AM33 {
        alias           { "MN10300 AM33 variant HAL" hal_mn10300_am33 mn10300_am33_hal }
        directory       hal/mn10300/am33
        script          hal_mn10300_am33.cdl
        hardware
        description "
           The MN10300 AM33 variant HAL package provides generic
           support for this processor architecture. It is also
           necessary to select a specific target platform HAL
           package."
}

package CYGPKG_HAL_MN10300_AM33_STB {
        alias           { "Matsushita STB board" hal_mn10300_am33_stb mn10300_am33_stb_hal }
        directory       hal/mn10300/stb
        script          hal_mn10300_am33_stb.cdl
        hardware
        description "
           The STB HAL package should be used when targetting the
           actual hardware for the AM33 STB evaluation board."
}

package CYGPKG_HAL_MN10300_AM33_ASB {
        alias           { "Matsushita ASB2303 board" hal_mn10300_am33_asb mn10300_am33_asb_hal }
        directory       hal/mn10300/asb
        script          hal_mn10300_am33_asb.cdl
        hardware
        description "
           The ASB2303 HAL package should be used when targetting the
           actual hardware for the AM33 ASB2303 evaluation board."
}

package CYGPKG_HAL_MN10300_AM33_ASB2305 {
        alias           { "Matsushita ASB2305 board" hal_mn10300_am33_asb2305
                          mn10300_am33_asb2305_hal }
        directory       hal/mn10300/asb2305
        script          hal_mn10300_am33_asb2305.cdl
        hardware
        description "
           The ASB2305 HAL package should be used when targetting the
           actual hardware for the AM33 ASB2305 evaluation board."
}

# --------------------------------------------------------------------------
# NEC packages
package CYGPKG_HAL_V85X {
        alias           { "NEC V85x common HAL" hal_v85x nec_arch_hal }
        directory       hal/v85x/arch
        script          hal_v85x.cdl
        hardware
        description "
The NEC V85x architecture HAL package provides generic support for this
processor architecture. It is also necessary to select a specific
target platform HAL package."
}

package CYGPKG_HAL_V85X_V850 {
        alias           { "NEC V850 variant HAL" hal_v85x_v850 nec_v850_hal }
        directory       hal/v85x/v850
        script          hal_v85x_v850.cdl
        hardware
        description "
The V850 HAL package provides the support needed to run eCos on a NEC V850
processor."
}

package CYGPKG_HAL_V85X_V850_CEB {
        alias           { "Cosmo CEB-V850/SA1 board" hal_v85x_v850_ceb nec_v850_ceb_hal }
        directory       hal/v85x/ceb_v850
        script          hal_v85x_ceb_v850.cdl
        hardware
        description "
The CEB-V850/SA1 HAL package provides the support needed to run eCos on a Cosmo CEB-V850/SA1
evaluation board."
}

# --------------------------------------------------------------------------
# m68k packages

package CYGPKG_HAL_M68K {
    alias       { "M68K common HAL" hal_m68k m68k_hal m68k_arch_hal }
    directory   hal/m68k/arch
    script      hal_m68k.cdl
    hardware

    description   "The M68K architecture HAL package provides generic
                   support for this architecture."
}

package CYGPKG_HAL_M68K_MCFxxxx {
    alias       { "M68K/ColdFire variant HAL" hal_m68k_mcfxxxx m68k_mcfxxxx_hal }
    directory   hal/m68k/mcf52xx/var
    script      hal_m68k_mcf52xx.cdl
    hardware

    description   "The M68k/ColdFire variant  HAL  package provides generic
                  support for Freescale ColdFire  cores."
}

package CYGPKG_HAL_M68K_MCF5272 {
    alias       { "mcf5272 68k/ColdFire processor variant HAL" hal_m68k_mcf5272 m68k_mcf5272_hal }
    directory   hal/m68k/mcf52xx/mcf5272/proc
    script      hal_m68k_mcf5272.cdl
    hardware

    description   "The mcf5272 processor variant HAL package provides generic
                   support for this processor."
}

package CYGPKG_HAL_M68K_M5272C3 {
    alias       { "Freescale m5272c3 evaluation board platform HAL"
        hal_m68k_m5272c3 m68k_m5272c3_hal }
    directory   hal/m68k/mcf52xx/mcf5272/m5272c3
    script      hal_m68k_m5272c3.cdl
    hardware

    description   "The Freescale  m5272c3 evaluation  board platform  HAL
                  package should be used when targeting the actual  hardware
                  for the Freescale m5272c3 evaluation board platform."
}

package CYGPKG_DEVS_ETH_MCFxxxx {
    alias       { "MCFxxxx ethernet driver" devs_eth_mcfxxxx mcfxxxx_eth_driver }
    hardware
    directory   devs/eth/m68k/mcf5272
    script      mcf5272_eth.cdl
    description "
            This packages provides an ethernet driver for the on-chip
        device provided by MCFxxxx ColdFire processors."
}

package CYGPKG_DEVS_SERIAL_MCFxxxx {
    alias       { "MCFxxxx serial device driver" devs_serial_mcfxxxx mcfxxxx_serial_driver }
    hardware
    directory   devs/serial/m68k/mcf52xx
    script      ser_mcf52xx.cdl
    description "
            This package provides serial drivers for the on-chip UART's
            provided by MCFxxxx ColdFire processors."
}

# --------------------------------------------------------------------------
# CalmRISC16 packages

package CYGPKG_HAL_CALM16 {
        alias           { "CalmRISC16 common HAL" hal_calm16 calm16_hal calm16_arch_hal }
        directory       hal/calmrisc16/arch/
        script          hal_calm16.cdl
        hardware
        description "
            The CalmRISC16 architecture HAL package provides generic support
            for this processor architecture. It is also necessary to
            select a CPU variant and a specific target platform HAL
            package."
}

package CYGPKG_HAL_CALM16_CORE {
        alias           { "CalmRISC16 Core HAL" hal_calm16core calm16core_hal calm16core_arch_hal }
        directory       hal/calmrisc16/core/
        script          hal_calm16_core.cdl
        hardware
        description "
           The CalmRISC16 Core architecture HAL package provides generic support
           for this processor architecture. It is also necessary to
           select a specific target platform HAL package."
}

package CYGPKG_HAL_CALM16_CEB {
        alias           { "CalmRISC16 Core eval board" hal_calm16_ceb calm16_ceb_hal }
        directory       hal/calmrisc16/ceb
        script          hal_calm16_ceb.cdl
        hardware
        description "
           The CalmRISC16 HAL package should be used when targetting the
           actual hardware. "
}
# --------------------------------------------------------------------------
# CalmRISC32 packages

package CYGPKG_HAL_CALM32 {
        alias           { "CalmRISC32 common HAL" hal_calm32 calm32_hal calm32_arch_hal }
        directory       hal/calmrisc32/arch/
        script          hal_calm32.cdl
        hardware
        description "
            The CalmRISC32 architecture HAL package provides generic support
            for this processor architecture. It is also necessary to
            select a CPU variant and a specific target platform HAL
            package."
}

package CYGPKG_HAL_CALM32_CORE {
        alias           { "CalmRISC32 Core HAL" hal_calm32core calm32core_hal calm32core_arch_hal }
        directory       hal/calmrisc32/core/
        script          hal_calm32_core.cdl
        hardware
}

package CYGPKG_HAL_CALM32_CEB {
        alias           { "CalmRISC32 Core eval board" hal_calm32_ceb calm32_ceb_hal hal_commo }
        directory       hal/calmrisc32/ceb
        script          hal_calm32_ceb.cdl
        hardware
        description "
           The CalmRISC32 HAL package should be used when targetting the
           actual hardware. "
}


# --------------------------------------------------------------------------
# FUJITSU packages
package CYGPKG_HAL_FRV {
        alias           { "FR-V (Fujitsu) common HAL" hal_frv frv_hal frv_arch_hal }
        directory       hal/frv/arch
        script          hal_frv.cdl
        hardware
        description "
The FRV architecture HAL package provides generic support for this
processor architecture. It is also necessary to select a specific
target platform HAL package."
}

package CYGPKG_HAL_FRV_FRV400 {
        alias           { "FUJITSU development board (FR-V 400)" hal_frv_frv400 frv_frv400_hal }
        directory       hal/frv/frv400
        script          hal_frv_frv400.cdl
        hardware
        description "
The FRV400 HAL package provides the support needed to run eCos on a FUJITSU
MB93091 (FR-V 400) eval board."
}

package CYGPKG_HAL_FRV_MB93091 {
        alias           { "FUJITSU development board (FR-V)" mb93091 }
        directory       hal/frv/mb93091
        script          hal_frv_mb93091.cdl
        hardware
        description "
The FRV Generic HAL package provides the support needed to run eCos on 
various FUJITSU FR-V eval boards."
}

package CYGPKG_HAL_FRV_MB93093 {
        alias           { "FUJITSU MB93093-PD00 Portable Development Kit (FR-V)" mb93093 }
        directory       hal/frv/mb93093
        script          hal_frv_mb93093.cdl
        hardware
        description "
The MB93093 HAL package provides the support needed to run eCos on 
the Fujitsu MB93093-PD00 Portable Development Kit board."
}

package CYGPKG_DEVS_ETH_FRV_FRV400 {
        alias           { "Fujitsu FR-V 400 with 82559 ethernet driver"
                           devs_eth_frv_frv400 frv400_eth_driver }
        hardware
        directory       devs/eth/frv/frv400
        script          frv400_eth_drivers.cdl
        description     "Ethernet driver for Fujitsu FR-V 400 with Intel
                         i82559 ethernet interfaces."
}

package CYGPKG_DEVS_ETH_FRV_PDK403 {
        alias           { "Fujitsu MB93093-PD00 with AXL88796 ethernet driver"
                           devs_eth_frv_pdk403 pdk403_eth_driver }
        hardware
        directory       devs/eth/frv/pdk403
        script          pdk403_eth_drivers.cdl
        description     "Ethernet driver for Fujitsu MB93093-PD00 Portable
                         Demonstration Kit with AXL88796 Ethernet device"
}

package CYGPKG_DEVS_ETH_FRV_CB70 {
        alias           { "Fujitsu FR-V 405 with DM9000 ethernet driver"
                           devs_eth_frv_cb70 cb70_eth_driver }
        hardware
        directory       devs/eth/frv/cb70
        script          cb70_eth_driver.cdl
        description     "Ethernet driver for Fujitsu FR-V 405 CB70 CPU card with
                         Davicom DM9000 ethernet interface."
}

# FR30 packages

package CYGPKG_HAL_FR30 {
    alias       { "Fujitsu FR30 architecture (FR30/FR50/FR60)" hal_fr30
                    fr30_hal }
    directory   hal/fr30/arch
    script      hal_fr30.cdl
    hardware
        description "
The Fujitsu FR30 HAL package provides the generic support needed to run eCos on 
a FR30 based microcontroller. FR50 and FR60 architectures should also select
this one."
}

package CYGPKG_HAL_FR30_MB91301 {
    alias       { "Fujitsu MB31301 variant (FR60)" hal_fr30_mb91301
                    fr30_mb91301_hal }
    directory   hal/fr30/mb91301
    script      hal_fr30_mb91301.cdl
    hardware
        description "
The Fujitsu MB91301 HAL package provides the support needed to run eCos on
the Fujitsu Starterkit MB91302 Evaluation board. It contains a MB91302A
Microcontroller from Fujitsu with a FR60 Core. So FR30 support is also needed."
}

package CYGPKG_HAL_FR30_MB91301_SKMB91302 {
    alias       { "Fujitsu Starterkit MB91302 board" hal_fr30_skmb91302
                    fr30_skmb91302_hal }
    directory   hal/fr30/skmb91302
    script      hal_fr30_skmb91302.cdl
    hardware
        description "
The SKMB91302 HAL package provides the support needed to run eCos on
the Fujitsu Starterkit MB91302 board. It contains a MB91302
Microcontroller from Fujitsu with a FR60 Core. So FR30 support is needed."
}

package CYGPKG_DEVS_FLASH_FR30_SKMB91302 {
    alias       { "Fujitsu Starterkit MB91302 FLASH memory support" flash_skmb91302 }
    directory   devs/flash/fr30/skmb91302
    script      flash_skmb91302.cdl
    hardware
        description "
           This package contains hardware support for FLASH memory
       on the Fujitsu Starterkit MB91302 platform.
        (AMD 29DL640E-90 Device)"
}

package CYGPKG_DEVS_ETH_ARM_AT91 {
        alias           { "AT91 Ethernet driver" at91_eth_driver }
        directory       devs/eth/arm/at91
        script          at91_eth.cdl
        hardware
        description     "Ethernet driver for the AT91 family of chips"
}

package CYGPKG_DEVS_ETH_ARM_LPC2XXX {
        alias           { "LPC2xxx/LPC17xx Ethernet driver" }
        directory       devs/eth/arm/lpc2xxx
        script          lpc2xxx_eth.cdl
        hardware
        description     "Ethernet driver for the LPC2xxx/LPC17xx family of chips"
}


# --------------------------------------------------------------------------

# ==========================================================================

# --------------------------------------------------------------------------
# FRV targets
target frv400 {
        alias { "Fujitsu development board (FR-V 400)" FRV400 }
        packages { CYGPKG_HAL_FRV
                   CYGPKG_HAL_FRV_FRV400
                   CYGPKG_IO_PCI
                   CYGPKG_DEVS_ETH_FRV_FRV400
                   CYGPKG_DEVS_ETH_NS_DP83902A
                   CYGPKG_DEVS_FLASH_FRV_FRV400
                   CYGPKG_DEVS_FLASH_AMD_AM29XXXXX
        }
        description "
The frv400 target provides the packages needed to run eCos on a Fujistu
development board (FR-V 400)."
}

target mb93091 {
        alias { "Fujitsu MB93091 development board (FR-V 4xx,5xx)" MB93091 }
        packages { CYGPKG_HAL_FRV
                   CYGPKG_HAL_FRV_MB93091
                   CYGPKG_IO_PCI
                   CYGPKG_DEVS_ETH_FRV_FRV400
                   CYGPKG_DEVS_ETH_NS_DP83902A
                   CYGPKG_DEVS_ETH_FRV_CB70
                   CYGPKG_DEVS_ETH_DAVICOM_DM9000
                   CYGPKG_DEVS_FLASH_FRV_FRV400
                   CYGPKG_DEVS_FLASH_AMD_AM29XXXXX
        }
        description "
The MB93091 target provides the packages needed to run eCos on a Fujitsu
MB93091 development board (FR-V 400 etc.)."
}

target mb93093 {
        alias { "Fujitsu development board (FR-V 400)" MB93093 }
        packages { CYGPKG_HAL_FRV
                   CYGPKG_HAL_FRV_MB93093
                   CYGPKG_DEVS_ETH_FRV_PDK403
                   CYGPKG_DEVS_ETH_NS_DP83902A
                   CYGPKG_DEVS_FLASH_FRV_PDK403
                   CYGPKG_DEVS_FLASH_AMD_AM29XXXXX
        }
        description "
The MB93093 target provides the packages needed to run eCos on a Fujitsu
MB93090-PD00 Portable Development Kit."
}

# FR30 Targets

target skmb91302 {
    alias { "Fujitsu Starterkit MB91302 board" }
    packages { CYGPKG_HAL_FR30
                   CYGPKG_HAL_FR30_MB91301
                   CYGPKG_HAL_FR30_MB91301_SKMB91302
                   CYGPKG_DEVS_FLASH_FR30_SKMB91302
                   CYGPKG_DEVS_FLASH_AMD_AM29XXXXX
}
        description "
The Starterkit MB91302 HAL package provides the support needed to run
eCos on the Fujitsu Starterkit MB91302 board. It contains a MB91302
Microcontroller from Fujitsu with a FR60 Core. So FR30 support is
included."
}

# --------------------------------------------------------------------------
# ARM Targets

target pid {
        alias { "ARM development board (PID)" PID }
        packages { CYGPKG_HAL_ARM
                   CYGPKG_HAL_ARM_PID
                   CYGPKG_IO_SERIAL_GENERIC_16X5X
                   CYGPKG_IO_SERIAL_ARM_PID
                   CYGPKG_DEVS_FLASH_ARM_PID
                   CYGPKG_DEVS_FLASH_ATMEL_AT29CXXXX
        }
        description "
The pid target provides the packages needed to run eCos on an ARM
development board (formerly known as PID)."
}

target aeb {
        alias { "ARM evaluation board (AEB-1)" aeb1 }
        packages { CYGPKG_HAL_ARM
                   CYGPKG_HAL_ARM_AEB
                   CYGPKG_IO_SERIAL_ARM_AEB
                   CYGPKG_DEVICES_WATCHDOG_ARM_AEB
        }
        description "
The aeb target provides the packages needed to run eCos on an ARM
evaluation board (AEB-1)."
}

target e7t {
        alias { "ARM Evaluator7T board (AEB-2)" aeb2 }
        packages { CYGPKG_HAL_ARM
                   CYGPKG_HAL_ARM_E7T
                   CYGPKG_DEVS_FLASH_ARM_E7T
                   CYGPKG_DEVS_FLASH_AMD_AM29XXXXX
                   CYGPKG_DEVS_FLASH_SST_39VFXXX
                   CYGPKG_IO_SERIAL_ARM_E7T
                   CYGPKG_DEVS_ETH_ARM_KS32C5000
        }
        description "
 The e7t target provides the packages needed to run eCos on an ARM
 Evaluator7T board (aka AEB-2)."
}

target integrator_arm7 {
        alias { "ARM INTEGRATOR development board w/ ARM7TDMI" integrator }
        packages { CYGPKG_HAL_ARM 
                   CYGPKG_HAL_ARM_INTEGRATOR 
                   CYGPKG_IO_PCI
                   CYGPKG_IO_SERIAL_ARM_INTEGRATOR
                   CYGPKG_DEVS_FLASH_INTEL_28FXXX
                   CYGPKG_DEVS_FLASH_ARM_INTEGRATOR
                   CYGPKG_DEVS_ETH_INTEL_I82559
                   CYGPKG_DEVS_ETH_ARM_INTEGRATOR
        }
        description "
        The INTEGRATOR_ARM7 target provides the packages needed to 
        run eCos on an ARM development board with an ARM7TDMI core
        module installed."
}

target integrator_arm9 {
        alias { "ARM INTEGRATOR development board w/ ARM966" }
        packages { CYGPKG_HAL_ARM
                   CYGPKG_HAL_ARM_ARM9
                   CYGPKG_HAL_ARM_INTEGRATOR 
                   CYGPKG_IO_PCI
                   CYGPKG_IO_SERIAL_ARM_INTEGRATOR
                   CYGPKG_DEVS_FLASH_INTEL_28FXXX
                   CYGPKG_DEVS_FLASH_ARM_INTEGRATOR
                   CYGPKG_DEVS_ETH_INTEL_I82559
                   CYGPKG_DEVS_ETH_ARM_INTEGRATOR
        }
        description "
        The INTEGRATOR_ARM9 target provides the packages needed to 
        run eCos on an ARM development board with an ARM966 core
        module installed."
}

target eb40 {
        alias { "Atmel evaluation board (EB40)" at91 at91_eb40 }
        packages { CYGPKG_HAL_ARM
                   CYGPKG_HAL_ARM_AT91
                   CYGPKG_HAL_ARM_AT91_EB40
                   CYGPKG_DEVS_FLASH_EB40
                   CYGPKG_DEVS_FLASH_ATMEL_AT29CXXXX
                   CYGPKG_IO_SERIAL_ARM_AT91
                   CYGPKG_DEVICES_WATCHDOG_ARM_AT91
        }
        description "
        The eb40 target provides the packages needed to run eCos on an Atmel
        evaluation board (EB40)."
}

target jtst {
        alias { "Atmel Diopsis evaluation board (jtst)" at91_jtst }
        packages { CYGPKG_HAL_ARM
                   CYGPKG_HAL_ARM_AT91
                   CYGPKG_HAL_ARM_AT91_JTST
                   CYGPKG_IO_SERIAL_ARM_AT91
                   CYGPKG_DEVS_FLASH_JTST
                   CYGPKG_DEVS_FLASH_ATMEL_AT49XXXX
                   CYGPKG_DEVICES_WATCHDOG_ARM_AT91
        }
        description "
        The jtst target provides the packages needed to run eCos on an Atmel
        Diospsis evaluation board (jtst)."
}

target at91sam7sek {
        alias { "Atmel AT91SAM7SEK evaluation board" at91_at91sam7sek }
        packages { CYGPKG_HAL_ARM
                   CYGPKG_HAL_ARM_AT91
                   CYGPKG_HAL_ARM_AT91SAM7
                   CYGPKG_HAL_ARM_AT91SAM7SEK
                   CYGPKG_IO_SERIAL_ARM_AT91
                   CYGPKG_DEVS_FLASH_AT91
                   CYGPKG_IO_SPI
                   CYGPKG_DEVS_SPI_ARM_AT91
                   CYGPKG_DEVICES_WATCHDOG_ARM_AT91WDTC
                   CYGPKG_IO_USB
                   CYGPKG_IO_USB_SLAVE
                   CYGPKG_DEVS_USB_AT91
                   CYGPKG_DEVS_ADC_ARM_AT91
        }
        description "
        The at91sam7sek target provides the packages needed to run eCos on an 
        Atmel AT91SAM7S-EK evaluation board."
}

target at91sam7xek {
        alias { "Atmel AT91SAM7XEK evaluation board" at91_at91sam7xek }
        packages { CYGPKG_HAL_ARM
                   CYGPKG_HAL_ARM_AT91
                   CYGPKG_HAL_ARM_AT91SAM7
                   CYGPKG_HAL_ARM_AT91SAM7XEK
                   CYGPKG_IO_SERIAL_ARM_AT91
                   CYGPKG_DEVS_FLASH_AT91
                   CYGPKG_IO_SPI
                   CYGPKG_DEVS_SPI_ARM_AT91
                   CYGPKG_DEVICES_WATCHDOG_ARM_AT91WDTC
                   CYGPKG_IO_USB
                   CYGPKG_IO_USB_SLAVE
                   CYGPKG_DEVS_USB_AT91
                   CYGPKG_DEVS_ETH_PHY
                   CYGPKG_DEVS_ETH_ARM_AT91
                   CYGPKG_DEVS_CAN_AT91SAM7
                   CYGPKG_DEVS_ADC_ARM_AT91
        }
        description "
        The at91sam7xek target provides the packages needed to run eCos on an 
        Atmel AT91SAM7X-EK evaluation board."
}

target sam7ex256 {
        alias { "Olimex SAM7-EX256 evaluation board" at91_sam7ex256 }
        packages { CYGPKG_HAL_ARM
                   CYGPKG_HAL_ARM_AT91
                   CYGPKG_HAL_ARM_AT91SAM7
                   CYGPKG_HAL_ARM_SAM7EX256
                   CYGPKG_IO_SERIAL_ARM_AT91
                   CYGPKG_DEVS_FLASH_AT91
                   CYGPKG_IO_SPI
                   CYGPKG_DEVS_SPI_ARM_AT91
                   CYGPKG_DEVICES_WATCHDOG_ARM_AT91WDTC
                   CYGPKG_IO_USB
                   CYGPKG_IO_USB_SLAVE
                   CYGPKG_DEVS_USB_AT91
                   CYGPKG_DEVS_ETH_PHY
                   CYGPKG_DEVS_ETH_ARM_AT91
                   CYGPKG_DEVS_CAN_AT91SAM7
                   CYGPKG_DEVS_ADC_ARM_AT91
        }
        description "
        The SAM7EX256 target provides the packages needed to run eCos on an 
        Olimex SAM7-EX256 evaluation board."
}

target eb40a {
        alias { "Atmel evaluation board (EB40A)" at91_eb40a }
        packages { CYGPKG_HAL_ARM
                   CYGPKG_HAL_ARM_AT91
                   CYGPKG_HAL_ARM_AT91_EB40A
                   CYGPKG_DEVS_FLASH_EB40A
                   CYGPKG_DEVS_FLASH_ATMEL_AT49XXXX
                   CYGPKG_IO_SERIAL_ARM_AT91
                   CYGPKG_DEVICES_WATCHDOG_ARM_AT91
        }
        description "
        The eb40a target provides the packages needed to run eCos on an Atmel
        evaluation board (EB40A)."
}

target eb42 {
        alias { "Atmel evaluation board (EB42)" at91_eb42 }
        packages { CYGPKG_HAL_ARM
                   CYGPKG_HAL_ARM_AT91
                   CYGPKG_HAL_ARM_AT91_EB42
                   CYGPKG_DEVS_FLASH_EB42
                   CYGPKG_DEVS_FLASH_ATMEL_AT49XXXX
                   CYGPKG_IO_SERIAL_ARM_AT91
        }
        description "
        The eb42 target provides the packages needed to run eCos on an Atmel
        evaluation board (EB42)."
}

target eb55 {
        alias { "Atmel evaluation board (EB55)" at91_eb55 }
        packages { CYGPKG_HAL_ARM
                   CYGPKG_HAL_ARM_AT91
                   CYGPKG_HAL_ARM_AT91_EB55
                   CYGPKG_DEVS_FLASH_EB55
                   CYGPKG_DEVS_FLASH_ATMEL_AT49XXXX
                   CYGPKG_DEVS_FLASH_ATMEL_DATAFLASH
                   CYGPKG_IO_SERIAL_ARM_AT91
                   CYGPKG_IO_SPI
                   CYGPKG_DEVS_SPI_ARM_EB55
                   CYGPKG_DEVS_SPI_ARM_AT91
                   CYGPKG_DEVICES_WATCHDOG_ARM_AT91
                   CYGPKG_DEVS_ADC_ARM_AT91
        }
        description "
        The eb55 target provides the packages needed to run eCos on an Atmel
        evaluation board (EB55)."
}

target phycore {
        alias { "PHYTEC evaluation board (phyCORE AT91M55800A)" at91_phycore }
        packages { CYGPKG_HAL_ARM
                   CYGPKG_HAL_ARM_AT91
                   CYGPKG_HAL_ARM_AT91_PHYCORE
                   CYGPKG_DEVS_FLASH_PHYCORE
                   CYGPKG_DEVS_FLASH_AMD_AM29XXXXX
                   CYGPKG_IO_SERIAL_ARM_AT91
                   CYGPKG_DEVICES_WATCHDOG_ARM_AT91
                   CYGPKG_DEVS_ADC_ARM_AT91
        }
        description "
        The phyCORE AT91M55800A target provides the packages needed to 
        run eCos on an PHYTEC evaluation board (phycore AT91M55800A based 
        on HD200)."
}

target mcb2100 {
        alias { "Keil evaluation board MCB2100" }
        packages { CYGPKG_HAL_ARM
                   CYGPKG_HAL_ARM_LPC2XXX
                   CYGPKG_HAL_ARM_LPC2XXX_MCB2100
                   CYGPKG_IO_SERIAL_GENERIC_16X5X
                   CYGPKG_IO_SERIAL_ARM_LPC2XXX
                   CYGPKG_DEVICES_WATCHDOG_ARM_LPC2XXX
        }
        description "
        The mcb2100 target provides the packages needed to run eCos on the
        MCB2100 evaluation board from Keil."
}

target p2106 {
        alias { "Olimex evaluation board LPC-P2106" }
        packages { CYGPKG_HAL_ARM
                   CYGPKG_HAL_ARM_LPC2XXX
                   CYGPKG_HAL_ARM_LPC2XXX_P2106
                   CYGPKG_IO_SERIAL_GENERIC_16X5X
                   CYGPKG_IO_SERIAL_ARM_LPC2XXX
                   CYGPKG_DEVICES_WATCHDOG_ARM_LPC2XXX
        }
        description "
        The p2106 target provides the packages needed to run eCos on the
        LPC-P2106 evaluation board from Olimex."
}

target lpcmt {
        alias { "Olimex evaluation board LPC-LPCMT" }
        packages { CYGPKG_HAL_ARM
                   CYGPKG_HAL_ARM_LPC2XXX
                   CYGPKG_HAL_ARM_LPC2XXX_LPCMT
                   CYGPKG_IO_SERIAL_GENERIC_16X5X
                   CYGPKG_IO_SERIAL_ARM_LPC2XXX
                   CYGPKG_DEVICES_WATCHDOG_ARM_LPC2XXX
        }
        description "
        The lpcmt target provides the packages needed to run eCos on the
        LPC-LPCMT evaluation board from Olimex."
}

target phycore229x {
        alias { "phyCORE-LPC2294/92 development board HAL" }
        packages { CYGPKG_HAL_ARM
                   CYGPKG_HAL_ARM_LPC2XXX
                   CYGPKG_HAL_ARM_LPC2XXX_PHYCORE229X 
                   CYGPKG_IO_SERIAL_GENERIC_16X5X
                   CYGPKG_IO_SERIAL_ARM_LPC2XXX
                   CYGPKG_DEVICES_WATCHDOG_ARM_LPC2XXX
                   CYGPKG_DEVS_FLASH_AMD_AM29XXXXX
                   CYGPKG_DEVS_FLASH_PHYCORE229X
                   CYGPKG_DEVS_ETH_ARM_PHYCORE229X
                   CYGPKG_DEVS_ETH_SMSC_LAN91CXX
                   CYGPKG_DEVS_CAN_LPC2XXX
        }
        description "
            The phyCORE-LPC229x HAL package provides the support
            needed to run eCos on a Phytec phyCORE-LPC2294/2
            development board."
}

target ea2468 {
        alias { "Embedded Artists LPC2468 OEM board HAL" }
        packages { CYGPKG_HAL_ARM
                   CYGPKG_HAL_ARM_LPC24XX
                   CYGPKG_HAL_ARM_LPC24XX_EA2468 
                   CYGPKG_DEVICES_WATCHDOG_ARM_LPC2XXX                        
                   CYGPKG_DEVICES_WALLCLOCK_ARM_LPC2XXX
                   CYGPKG_IO_SERIAL_GENERIC_16X5X
                   CYGPKG_IO_SERIAL_ARM_LPC24XX
                   CYGPKG_DEVICES_WATCHDOG_ARM_LPC2XXX
                   CYGPKG_DEVS_CAN_LPC2XXX
                   CYGPKG_DEVS_FLASH_EA2468
                   CYGPKG_DEVS_FLASH_SST_39VFXXX
                   CYGPKG_DEVS_ETH_PHY
                   CYGPKG_DEVS_ETH_ARM_LPC2XXX
                   CYGPKG_IO_I2C
                   CYGPKG_DEVS_I2C_ARM_LPC2XXX     
                   CYGPKG_DEVS_ADC_ARM_LPC24XX
        }
        description "
            The Embedded Artists LPC2468 HAL package provides the support
            needed to run eCos on an Embedded Artists LPC2468 OEM board."
}

target olpch2294 {
        alias { "Olimex LPC-H2294 header board" }
        packages { CYGPKG_HAL_ARM
                   CYGPKG_HAL_ARM_LPC2XXX
                   CYGPKG_HAL_ARM_LPC2XXX_OLPCH2294
                   CYGPKG_DEVS_FLASH_STRATA_V2
                   CYGPKG_DEVS_FLASH_ARM_OLPCX2294_V2
                   CYGPKG_IO_SERIAL_GENERIC_16X5X
                   CYGPKG_IO_SERIAL_ARM_LPC2XXX
                   CYGPKG_DEVICES_WATCHDOG_ARM_LPC2XXX
        }
        description "
            The olpch2294 target provides the packages needed to run
            eCos on Olimex LPC-H2294 header board."
}


target olpce2294 {
        alias { "Olimex LPC-E2294 development board" }
        packages { CYGPKG_HAL_ARM
                   CYGPKG_HAL_ARM_LPC2XXX
                   CYGPKG_HAL_ARM_LPC2XXX_OLPCE2294
                   CYGPKG_DEVS_FLASH_STRATA_V2
                   CYGPKG_DEVS_FLASH_ARM_OLPCX2294_V2
                   CYGPKG_DEVS_ETH_CL_CS8900A
                   CYGPKG_DEVS_ETH_ARM_OLPCE2294
                   CYGPKG_IO_SERIAL_GENERIC_16X5X
                   CYGPKG_IO_SERIAL_ARM_LPC2XXX
                   CYGPKG_DEVICES_WATCHDOG_ARM_LPC2XXX
        }
        description "
            The olpce2294 target provides the packages needed to run
            eCos on Olimex LPC-E2294 development board."
}

target olpcl2294 {
        alias { "Olimex LPC-L2294-1MB development board" }
        packages { CYGPKG_HAL_ARM
                   CYGPKG_HAL_ARM_LPC2XXX
                   CYGPKG_HAL_ARM_LPC2XXX_OLPCL2294
                   CYGPKG_DEVS_FLASH_STRATA_V2
                   CYGPKG_DEVS_FLASH_ARM_OLPCX2294_V2
                   CYGPKG_DEVS_ETH_CL_CS8900A
                   CYGPKG_DEVS_ETH_ARM_OLPCL2294
                   CYGPKG_IO_SERIAL_GENERIC_16X5X
                   CYGPKG_IO_SERIAL_ARM_LPC2XXX
                   CYGPKG_DEVICES_WATCHDOG_ARM_LPC2XXX
        }
        description "
            The olpcl2294 target provides the packages needed to run
            eCos on Olimex LPC-L2294-1MB development board."
}

target mace1 {
        alias { "MACE1 - a MAC7100 evaluation board" mac7100_mace1 }
        packages { CYGPKG_HAL_ARM
                   CYGPKG_HAL_ARM_MAC7100
                   CYGPKG_HAL_ARM_MAC7100_MACE1
                   CYGPKG_IO_SERIAL_FREESCALE_ESCI_H
                   CYGPKG_IO_SERIAL_FREESCALE_ESCI
        }
        description "
            The mace1 target provides the packages needed to run eCos
            on MAC7100 evaluation board (MACE1).  "
}

target mac7100evb {
        alias { "MAC7100EVB - Freescale MAC7100 evaluation board" mac7100_mac7100evb }
        packages { CYGPKG_HAL_ARM
                   CYGPKG_HAL_ARM_MAC7100
                   CYGPKG_HAL_ARM_MAC7100_MAC7100EVB
                   CYGPKG_IO_SERIAL_FREESCALE_ESCI_H
                   CYGPKG_IO_SERIAL_FREESCALE_ESCI
        }
        description "
            The MAC7100EVB target provides the packages needed to run eCos
            on Freescale MAC7100EVB evaluation board.  "
}

target ebsa285 {
        alias { "Intel EBSA285 StrongARM board" ebsa }
        packages { CYGPKG_HAL_ARM
                   CYGPKG_HAL_ARM_EBSA285
                   CYGPKG_IO_PCI
                   CYGPKG_DEVS_ETH_ARM_EBSA285
                   CYGPKG_DEVS_ETH_INTEL_I82559
                   CYGPKG_IO_SERIAL_ARM_EBSA285
                   CYGPKG_DEVICES_WATCHDOG_ARM_EBSA285
                   CYGPKG_DEVS_FLASH_EBSA285
        }
        description "
        The ebsa285 target provides the packages needed to run
        eCos on an Intel EBSA285 StrongARM board."
}


target aaed2000 {
        alias { "Agilent AAED2000 unit" aaed }
        packages { CYGPKG_HAL_ARM
                   CYGPKG_HAL_ARM_ARM9
                   CYGPKG_HAL_ARM_ARM9_AAED2000
                   CYGPKG_DEVS_FLASH_ARM_AAED2000
                   CYGPKG_DEVS_FLASH_AMD_AM29XXXXX
                   CYGPKG_DEVS_ETH_CL_CS8900A
                   CYGPKG_DEVS_ETH_ARM_AAED2000
                   CYGPKG_DEVS_KBD_AAED2000
                   CYGPKG_DEVS_TOUCH_AAED2000
        }
        description "
        The AAED2000 target provides the packages needed to run
        eCos on an Agilent AAED2000 board."
}

target excalibur_arm9 {
        alias { "Altera ARM9/Excalibur board" epxa10 }
        packages { CYGPKG_HAL_ARM
                   CYGPKG_HAL_ARM_ARM9
                   CYGPKG_HAL_ARM_ARM9_EXCALIBUR
                   CYGPKG_DEVS_FLASH_INTEL_28FXXX
                   CYGPKG_DEVS_FLASH_ARM_EXCALIBUR
        }
        description "
        The Excalibur target provides the packages needed to run
        eCos on an Altera Excalibur board."
}

target smdk2410 {
        alias { "Samsung ARM9/SMDK2410 development board" s3c2410x }
        packages { CYGPKG_HAL_ARM
                   CYGPKG_HAL_ARM_ARM9
                   CYGPKG_HAL_ARM_ARM9_SMDK2410
                   CYGPKG_IO_SERIAL_ARM_SMDK2410
                   CYGPKG_DEVS_FLASH_ARM_SMDK2410
                   CYGPKG_DEVS_FLASH_AMD_AM29XXXXX
        }
        description "
        The SMDK2410 target provides the packages needed to run eCos on 
        Samsung S3c2410x (ARM920T) based development boards (SMDK2410)."
}

target innovator {
        alias { "Innovator (ARM) board" }
        packages { CYGPKG_HAL_ARM
                   CYGPKG_HAL_ARM_ARM9
                   CYGPKG_HAL_ARM_ARM9_INNOVATOR
                   CYGPKG_DEVS_FLASH_AMD_AM29XXXXX
                   CYGPKG_DEVS_FLASH_ARM_INNOVATOR
                   CYGPKG_DEVS_ETH_SMSC_LAN91CXX
                   CYGPKG_DEVS_ETH_ARM_INNOVATOR
        }
        description "
        The Innovator HAL package provides the support needed to run
        RedBoot on the ARM processor of the Innovator.
        
        NOTE: Full support for eCos is not provided yet.  This HAL
        contains only the minimum amount necessary to run RedBoot
        on the Innovator.  In particular, interrupts are not yet
        supported.  Watch this space for more details in the near
        future."
}

target assabet {
        alias { "Intel StrongARM SA1110 board" }
        packages { CYGPKG_HAL_ARM
                   CYGPKG_HAL_ARM_SA11X0
                   CYGPKG_HAL_ARM_SA11X0_ASSABET
                   CYGPKG_IO_SERIAL_ARM_SA11X0
                   CYGPKG_DEVS_PCMCIA_ASSABET
                   CYGPKG_DEVS_FLASH_STRATA
                   CYGPKG_DEVS_FLASH_ASSABET
                   CYGPKG_IO_USB
                   CYGPKG_IO_USB_SLAVE
                   CYGPKG_DEVS_USB_SA11X0
                   CYGPKG_DEVICES_WATCHDOG_ARM_SA11X0
                   CYGPKG_DEVS_ETH_CF
                   CYGPKG_DEVS_ETH_NS_DP83902A
        }
        description "
        The assabet target provides the packages needed to run
        eCos on an Intel StrongARM SA1110 evaluation board."
}

target cerf {
        alias { "Intrinsyc SA1110 Cerf board" cerf_cube }
        packages { CYGPKG_HAL_ARM
                   CYGPKG_HAL_ARM_SA11X0
                   CYGPKG_HAL_ARM_SA11X0_CERF
                   CYGPKG_IO_SERIAL_ARM_SA11X0
                   CYGPKG_DEVS_PCMCIA_CERF
                   CYGPKG_DEVS_FLASH_STRATA
                   CYGPKG_DEVS_FLASH_CERF
                   CYGPKG_IO_USB
                   CYGPKG_IO_USB_SLAVE
                   CYGPKG_DEVS_USB_SA11X0
                   CYGPKG_DEVICES_WATCHDOG_ARM_SA11X0
                   CYGPKG_DEVS_ETH_CF
                   CYGPKG_DEVS_ETH_ARM_CERF
                   CYGPKG_DEVS_ETH_CL_CS8900A
        }
        description "
        The cerf target provides the packages needed to run
        eCos on an Intrinsyc SA1110 Cerf board."
}

target cerfpda {
        alias { "Intrinsyc SA1110 Cerfpda" cerf_pda }
        packages { CYGPKG_HAL_ARM
                   CYGPKG_HAL_ARM_SA11X0
                   CYGPKG_HAL_ARM_SA11X0_CERFPDA
                   CYGPKG_IO_SERIAL_GENERIC_16X5X
                   CYGPKG_IO_SERIAL_ARM_CERFPDA
                   CYGPKG_IO_SERIAL_ARM_SA11X0
                   CYGPKG_DEVS_PCMCIA_CERFPDA
                   CYGPKG_DEVS_FLASH_STRATA
                   CYGPKG_DEVS_FLASH_CERFPDA
                   CYGPKG_IO_USB
                   CYGPKG_IO_USB_SLAVE
                   CYGPKG_DEVS_USB_SA11X0
                   CYGPKG_DEVICES_WATCHDOG_ARM_SA11X0
                   CYGPKG_DEVS_ETH_CF
                   CYGPKG_DEVS_ETH_ARM_CERFPDA
                   CYGPKG_DEVS_ETH_CL_CS8900A
        }
        description "
        The cerfpda target provides the packages needed to run
        eCos on an Intrinsyc SA1110 cerfpda."
}

target ipaq {
        alias { "Compaq iPAQ Pocket PC" }
        packages { CYGPKG_HAL_ARM
                   CYGPKG_HAL_ARM_SA11X0
                   CYGPKG_HAL_ARM_SA11X0_IPAQ
                   CYGPKG_IO_SERIAL_ARM_SA11X0
                   CYGPKG_DEVS_PCMCIA_IPAQ
                   CYGPKG_DEVS_FLASH_IPAQ
                   CYGPKG_DEVS_FLASH_STRATA
                   CYGPKG_DEVICES_WATCHDOG_ARM_SA11X0
                   CYGPKG_DEVS_TOUCH_IPAQ
                   CYGPKG_DEVS_KBD_IPAQ
                   CYGPKG_DEVS_ETH_CF
                   CYGPKG_DEVS_ETH_NS_DP83902A
        }
        description "
        The IPAQ target provides the packages needed to run
        eCos on an Intel StrongARM SA1110 Pocket PC (Compaq iPAQ)."
}


target nano {
        alias { "nanoEngine StrongARM SA1110 board" nanoEngine }
        packages { CYGPKG_HAL_ARM
                   CYGPKG_HAL_ARM_SA11X0
                   CYGPKG_HAL_ARM_SA11X0_NANO
                   CYGPKG_IO_SERIAL_ARM_SA11X0
                   CYGPKG_DEVS_FLASH_NANO
                   CYGPKG_DEVS_FLASH_STRATA
                   CYGPKG_DEVICES_WATCHDOG_ARM_SA11X0
                   CYGPKG_IO_PCI
                   CYGPKG_DEVS_ETH_ARM_NANO
                   CYGPKG_DEVS_ETH_INTEL_I82559
        }
        description "
        The nanoEngine target provides the packages needed to run
        eCos on a Bright Star Engineering nanoEngine StrongARM SA1110 board."
}

target flexanet {
      alias { "Flexanet StrongARM SA1110 platform" }
      packages { CYGPKG_HAL_ARM
                   CYGPKG_HAL_ARM_SA11X0
                   CYGPKG_HAL_ARM_SA11X0_FLEXANET
                   CYGPKG_IO_SERIAL_ARM_SA11X0
                   CYGPKG_DEVS_FLASH_STRATA
                   CYGPKG_DEVS_FLASH_FLEXANET
                   CYGPKG_DEVS_ETH_SMSC_LAN91CXX
                   CYGPKG_DEVS_ETH_ARM_FLEXANET
                   CYGPKG_IO_USB
                   CYGPKG_IO_USB_SLAVE
                   CYGPKG_DEVS_USB_SA11X0
                   CYGPKG_DEVICES_WATCHDOG_ARM_SA11X0
        }
        description "
          The Flexanet target provides the packages needed to run
          eCos on an SA1110 Flexanet board."
}

target brutus {
        alias { "Intel StrongARM SA1100 board" }
        packages { CYGPKG_HAL_ARM
                   CYGPKG_HAL_ARM_SA11X0
                   CYGPKG_HAL_ARM_SA11X0_BRUTUS
                   CYGPKG_IO_SERIAL_ARM_SA11X0
        }
        description "
        The brutus target provides the packages needed to run
        eCos on an Intel StrongARM SA1100 evaluation board."
}

target sa1100mm {
        alias { "Intel StrongARM SA1100 Multimedia board" }
        packages { CYGPKG_HAL_ARM
                   CYGPKG_HAL_ARM_SA11X0
                   CYGPKG_HAL_ARM_SA11X0_SA1100MM
                   CYGPKG_IO_SERIAL_ARM_SA11X0
                   CYGPKG_DEVS_FLASH_SA1100MM
        }
        description "
        The sa1100mm target provides the packages needed to run
        eCos on an Intel StrongARM SA1100 Multimedia evaluation board."
}

target iq80310 {
        alias { "Intel IQ80310 XScale board" cyclone }
        packages { CYGPKG_HAL_ARM
                   CYGPKG_HAL_ARM_XSCALE_CORE
                   CYGPKG_HAL_ARM_XSCALE_IOP310
                   CYGPKG_HAL_ARM_XSCALE_IQ80310
                   CYGPKG_IO_PCI
                   CYGPKG_DEVS_ETH_INTEL_I82559
                   CYGPKG_DEVS_ETH_ARM_XSCALE_IQ80310
                   CYGPKG_IO_SERIAL_GENERIC_16X5X
                   CYGPKG_IO_SERIAL_ARM_XSCALE_IOP310
                   CYGPKG_DEVS_FLASH_ARM_XSCALE_IQ80310
        }
        description "
        The iq80310 target provides the packages needed to run
        eCos on a Cyclone IQ80310 board."
}

target npwr {
        alias { "NPWR Linux Engine (Intel XScale)" }
        packages { CYGPKG_HAL_ARM
                   CYGPKG_HAL_ARM_XSCALE_CORE
                   CYGPKG_HAL_ARM_XSCALE_IOP310
                   CYGPKG_HAL_ARM_XSCALE_NPWR
                   CYGPKG_DEVS_FLASH_ARM_XSCALE_IQ80310
                   CYGPKG_DEVS_ETH_INTEL_I82544
                   CYGPKG_DEVS_ETH_ARM_XSCALE_NPWR
                   CYGPKG_IO_PCI
                   CYGPKG_IO_SERIAL_GENERIC_16X5X
                   CYGPKG_IO_SERIAL_ARM_XSCALE_IOP310
        }
        description "
        The npwr target provides the packages needed to run
        eCos on a NPWR Linux Engine."
}

target iq80321 {
        alias { "Intel XScale IQ80321 Board" }
        packages { CYGPKG_HAL_ARM
                   CYGPKG_HAL_ARM_XSCALE_CORE
                   CYGPKG_HAL_ARM_XSCALE_VERDE
                   CYGPKG_HAL_ARM_XSCALE_IQ80321
                   CYGPKG_IO_PCI
                   CYGPKG_IO_SERIAL_GENERIC_16X5X
                   CYGPKG_IO_SERIAL_ARM_IQ80321
                   CYGPKG_DEVS_ETH_INTEL_I82544
                   CYGPKG_DEVS_FLASH_STRATA
                   CYGPKG_DEVS_FLASH_IQ80321
                   CYGPKG_DEVS_ETH_ARM_IQ80321
        }
        description "
        The IQ80321 target provides the packages needed to run
        eCos on an Intel XScale IQ80321 board."
}

target ixdp425 {
        alias { "IXDP425 board" }
        packages { CYGPKG_HAL_ARM
                   CYGPKG_HAL_ARM_XSCALE_CORE
                   CYGPKG_HAL_ARM_XSCALE_IXP425
                   CYGPKG_HAL_ARM_XSCALE_IXDP425
                   CYGPKG_IO_PCI
                   CYGPKG_DEVS_ETH_INTEL_I82559
                   CYGPKG_DEVS_ETH_ARM_IXDP425_I82559
                   CYGPKG_DEVS_FLASH_STRATA_V2
        }
        description "
        The ixdp425 target provides the packages needed to run
        eCos on an Intel network processor evaluation board."
}

target XSEngine {
        alias { "Exys XSEngine Board" xsengine }
        packages { CYGPKG_HAL_ARM
                   CYGPKG_HAL_ARM_XSCALE_CORE
                   CYGPKG_HAL_ARM_XSCALE_PXA2X0
                   CYGPKG_HAL_ARM_XSCALE_XSENGINE
                   CYGPKG_DEVS_FLASH_AMD_AM29XXXXX
                   CYGPKG_DEVS_FLASH_XSENGINE
                   CYGPKG_DEVS_ETH_SMSC_LAN91CXX
                   CYGPKG_DEVS_ETH_ARM_XSCALE_XSENGINE
        }
        description "
            The XSEngine target provides the packages needed to run
            eCos on an Exys XSEngine board."
}

target grg {
        alias { "Generic Residential Gateway" }
        packages { CYGPKG_HAL_ARM
                   CYGPKG_HAL_ARM_XSCALE_CORE
                   CYGPKG_HAL_ARM_XSCALE_IXP425
                   CYGPKG_HAL_ARM_XSCALE_GRG
                   CYGPKG_IO_PCI
                   CYGPKG_DEVS_ETH_INTEL_I82559
                   CYGPKG_DEVS_ETH_ARM_GRG_I82559
                   CYGPKG_DEVS_FLASH_STRATA
                   CYGPKG_DEVS_FLASH_GRG
        }
        description "
        The grg target provides the packages needed to run
        eCos on an Intel Generic Residential Gateway board."
}

target prpmc1100 {
        alias { "Motorola PrPMC1100" }
        packages { CYGPKG_HAL_ARM
                   CYGPKG_HAL_ARM_XSCALE_CORE
                   CYGPKG_HAL_ARM_XSCALE_IXP425
                   CYGPKG_HAL_ARM_XSCALE_PRPMC1100
                   CYGPKG_IO_PCI
                   CYGPKG_DEVS_FLASH_STRATA
                   CYGPKG_DEVS_FLASH_PRPMC1100
        }
        description "
        The prpmc1100 target provides the packages needed to run
        eCos on a Motorola PrPMC1100."
}

target edb7xxx {
        alias           { "Cirrus Logic EDB7xxx development board" edb7211 eb7xxx eb7211 }
        packages        { CYGPKG_HAL_ARM
                          CYGPKG_HAL_ARM_EDB7XXX
                          CYGPKG_DEVS_ETH_ARM_EDB7XXX
                          CYGPKG_DEVS_ETH_CL_CS8900A
                          CYGPKG_IO_SERIAL_ARM_EDB7XXX
                          CYGPKG_DEVS_FLASH_EDB7XXX
        }
        description "
The edb7xxx target provides the packages needed to run eCos on the Cirrus Logic EDB7xxx development boards."
    }

target pati {
        alias           { "MPL PATI" }
        packages        { CYGPKG_HAL_POWERPC
                          CYGPKG_HAL_POWERPC_MPC5xx
                          CYGPKG_HAL_POWERPC_PATI
                          CYGPKG_IO_SERIAL_POWERPC_MPC555
                          CYGPKG_DEVICES_WALLCLOCK_MPC5xx
                          CYGPKG_DEVS_FLASH_PATI
                          CYGPKG_DEVS_FLASH_INTEL_28FXXX
        }
        description "
            The pati target provides the packages needed to run
            eCos on a PATI MPC555 PC/104+ board from MLP
            elektronik."
}

target cma230 {
        alias           { "Cogent CMA230/222 board" cma222 }
        packages        { CYGPKG_HAL_ARM
                          CYGPKG_HAL_ARM_CMA230
                          CYGPKG_IO_SERIAL_ARM_CMA230
        }
        description "
The cma230 target provides the packages needed to run eCos on a Cogent 
CMA230 (ARM7TDMI) or CMA222 (ARM710T) board."
    }


target snds {
      alias { "Samsung SNDS" SNDS snds100 }
      packages { CYGPKG_HAL_ARM 
                 CYGPKG_HAL_ARM_SNDS 
                 CYGPKG_DEVS_ETH_ARM_KS32C5000
               }
      enable { CYGHWR_HAL_ARM_BIGENDIAN }
      description "
        The snds target provides the packages needed to run eCos on a
        Samsung SNDS eval board."
}

target aim711 {
      alias { "ARM Industrial Module AIM 711" AIM711 }
      packages {
                   CYGPKG_HAL_ARM 
                   CYGPKG_HAL_ARM_AIM711 
                   CYGPKG_DEVS_FLASH_SST_39VFXXX
                   CYGPKG_DEVS_FLASH_ARM_AIM711
                   CYGPKG_DEVS_ETH_ARM_KS32C5000
                   CYGPKG_IO_SERIAL_ARM_AIM711
                   CYGPKG_IO_SERIAL_ARM_S3C4510
                   CYGPKG_IO_SERIAL_GENERIC_16X5X
                   CYGPKG_DEVICES_WALLCLOCK_ARM_AIM711
                   CYGPKG_DEVICES_WALLCLOCK_DALLAS_DS1307 
               }
      description "
        The aim711 target provides the packages needed to run eCos on a
        ARM Industrial Module AIM 711."
 }


target mpc50 {
        alias { "MICROPLEX Printer Controller 5.0" }
        packages {
                                CYGPKG_HAL_ARM
                                CYGPKG_HAL_ARM_XSCALE_CORE
                                CYGPKG_HAL_ARM_XSCALE_PXA2X0
                                CYGPKG_HAL_ARM_XSCALE_MPC50
                                CYGPKG_DEVS_FLASH_STRATA
                                CYGPKG_DEVS_FLASH_MPC50
        }
        description "
        MICROPLEX Printer Controller 5.0"
}

# --------------------------------------------------------------------------
# SH targets

target sh7708 {
        alias       { "Hitachi EDK/SH7708 board" edk7708 }
        packages    { CYGPKG_HAL_SH
                      CYGPKG_HAL_SH_SH3
                      CYGPKG_HAL_SH_EDK7708
                      CYGPKG_DEVICES_WALLCLOCK_SH3 
                      CYGPKG_IO_SERIAL_SH_SCI
                      CYGPKG_IO_SERIAL_SH_EDK7708
                      CYGPKG_DEVICES_WATCHDOG_SH_SH3
                      CYGPKG_DEVS_FLASH_SH_EDK7708
                      CYGPKG_DEVS_FLASH_ATMEL_AT29CXXXX
        }
        description "
           The sh7708 target provides the packages needed to run
           eCos on a Hitachi EDK/SH7708 board."
}
target cq7708 {
        alias { "CqREEK SH7708 board" }
        packages { CYGPKG_HAL_SH
                   CYGPKG_HAL_SH_SH3
                   CYGPKG_HAL_SH_SH7708_CQ7708
                   CYGPKG_IO_SERIAL_SH_SCI
                   CYGPKG_IO_SERIAL_SH_CQ7708
        }
        description "
           The cq7708 target provides the packages needed to run
           eCos on a CqREEK SH7708 board."
}

target cq7750 {
        alias { "CqREEK SH7750 board" cqsh4 }
        packages { CYGPKG_HAL_SH
                   CYGPKG_HAL_SH_SH4
                   CYGPKG_HAL_SH_SH7750_CQ7750
                   CYGPKG_DEVS_FLASH_CQ7750
                   CYGPKG_DEVS_FLASH_AMD_AM29XXXXX
                   CYGPKG_IO_SERIAL_SH_SCIF }
        description "
           The sh7750 target provides the packages needed to run
           eCos on a CqREEK SH7750 board."
}

target hs7729pci {
        alias       { "Hitachi HS7729PCI board" hs7729 }
        packages    { CYGPKG_HAL_SH
                      CYGPKG_HAL_SH_SH3
                      CYGPKG_HAL_SH_SH7729_HS7729PCI
                      CYGPKG_DEVS_FLASH_SH_HS7729PCI
                      CYGPKG_DEVS_FLASH_AMD_AM29XXXXX
                      CYGPKG_IO_PCI
                      CYGPKG_DEVS_ETH_SH_HS7729PCI
                      CYGPKG_DEVS_ETH_VIA_RHINE
                      CYGPKG_DEVICES_WATCHDOG_SH_SH3
                      CYGPKG_DEVICES_WALLCLOCK_SH_HS7729PCI
                      CYGPKG_DEVICES_WALLCLOCK_DALLAS_DS12887
        }
        description "
           The hs7729pci target provides the packages needed to run
           eCos on a Hitachi HS7729PCI board."
}

target se77x9 {
        alias       { "Hitachi SE77x9 board" }
        packages    { CYGPKG_HAL_SH
                      CYGPKG_HAL_SH_SH3
                      CYGPKG_HAL_SH_SH77X9_SE77X9
                      CYGPKG_DEVS_FLASH_SH_SE77X9
                      CYGPKG_DEVS_FLASH_AMD_AM29XXXXX
                      CYGPKG_DEVS_ETH_NS_DP83902A
                      CYGPKG_DEVS_ETH_SH_SE77X9
                      CYGPKG_IO_SERIAL_SH_SE77X9
                      CYGPKG_IO_SERIAL_SH_SCIF
                      CYGPKG_IO_SERIAL_GENERIC_16X5X
                      CYGPKG_DEVICES_WATCHDOG_SH_SH3
        }
        description "
           The se77x9 target provides the packages needed to run
           eCos on a Hitachi Solution Engine 77x9 board."
}

target se7751 {
        alias       { "Hitachi SE7751 board" }
        packages    { CYGPKG_HAL_SH
                      CYGPKG_HAL_SH_SH4
                      CYGPKG_HAL_SH_SH7751_SE7751
                      CYGPKG_IO_PCI
                      CYGPKG_DEVS_FLASH_SH_SE7751
                      CYGPKG_DEVS_FLASH_AMD_AM29XXXXX
                      CYGPKG_IO_SERIAL_SH_SCIF
                      CYGPKG_DEVICES_WATCHDOG_SH_SH3
                      CYGPKG_DEVS_ETH_SH_SE7751
                      CYGPKG_DEVS_ETH_AMD_PCNET
        }
        description "
           The se7751 target provides the packages needed to run
           eCos on a Hitachi Solution Engine 7751 board."
}

target dreamcast {
        alias { "SEGA Dreamcast" }
        packages { CYGPKG_HAL_SH
                   CYGPKG_HAL_SH_SH4
                   CYGPKG_HAL_SH_SH7750_DREAMCAST
                   CYGPKG_IO_PCI
                   CYGPKG_DEVS_ETH_RLTK_8139
                   CYGPKG_DEVS_ETH_SH_DREAMCAST_RLTK8139
                   CYGPKG_IO_SERIAL_SH_SCIF }
        description "
           The sh7750 target provides the packages needed to run
           eCos on SEGA Dreamcast."
}

target sh4_202_md {
        alias       { "SuperH SH4-202 MicroDev CPU board" }
        packages    { CYGPKG_HAL_SH
                      CYGPKG_HAL_SH_SH4
                      CYGPKG_HAL_SH_SH4_202_MD
                      CYGPKG_DEVS_FLASH_STRATA
                      CYGPKG_DEVS_FLASH_SH_MICRODEV
                      CYGPKG_IO_SERIAL_SH_SCIF
                      CYGPKG_IO_SERIAL_SH_SH4_202_MD
                      CYGPKG_DEVS_ETH_SH_MICRODEV
                      CYGPKG_DEVS_ETH_SMSC_LAN91CXX
        }
        description "
           The sh4_202_md target provides the packages needed to run
           eCos on a SuperH SH4-202 MicroDev CPU board."
}

# --------------------------------------------------------------------------
# i386 targets
target pc_i82559 {
        alias           { "i386 PC target with i82559 ethernet" pc }
        packages        { CYGPKG_HAL_I386
                          CYGPKG_HAL_I386_GENERIC
                          CYGPKG_HAL_I386_PC
                          CYGPKG_HAL_I386_PCMB
                          CYGPKG_IO_PCI
                          CYGPKG_IO_SERIAL_GENERIC_16X5X
                          CYGPKG_IO_SERIAL_I386_PC
                          CYGPKG_DEVS_ETH_INTEL_I82559
                          CYGPKG_DEVS_ETH_I386_PC_I82559
                          CYGPKG_DEVICES_WALLCLOCK_DALLAS_DS12887
                          CYGPKG_DEVICES_WALLCLOCK_I386_PC
        }
        description "
            The pc_i82559 target provides the 
            packages needed to run eCos binaries on a standard i386
            PC motherboard with an Intel 82559 based ethernet interface."
}

target pc_i82544 {
        alias           { "i386 PC target with i82544 gigabit ethernet" pc_giga }
        packages        { CYGPKG_HAL_I386
                          CYGPKG_HAL_I386_GENERIC
                          CYGPKG_HAL_I386_PC
                          CYGPKG_HAL_I386_PCMB
                          CYGPKG_IO_PCI
                          CYGPKG_IO_SERIAL_GENERIC_16X5X
                          CYGPKG_IO_SERIAL_I386_PC
                          CYGPKG_DEVS_ETH_INTEL_I82544
                          CYGPKG_DEVS_ETH_I386_PC_I82544
                          CYGPKG_DEVICES_WALLCLOCK_DALLAS_DS12887
                          CYGPKG_DEVICES_WALLCLOCK_I386_PC
        }
        description "
            The pc_i82544 target provides the packages needed to run eCos binaries
            on a standard i386 PC motherboard with an Intel 82543/82544 based
            gigabit ethernet interface."
}

target pc_vmWare {
        alias           { "i386 PC target (vmWare)" }
        packages        { CYGPKG_HAL_I386
                          CYGPKG_HAL_I386_GENERIC
                          CYGPKG_HAL_I386_PC
                          CYGPKG_HAL_I386_PCMB
                          CYGPKG_IO_PCI
                          CYGPKG_IO_SERIAL_GENERIC_16X5X
                          CYGPKG_IO_SERIAL_I386_PC
                          CYGPKG_DEVS_ETH_AMD_LANCEPCI
                          CYGPKG_DEVS_ETH_I386_PC_LANCEPCI
                          CYGPKG_DEVICES_WALLCLOCK_DALLAS_DS12887
                          CYGPKG_DEVICES_WALLCLOCK_I386_PC
        }
        description "
            The pc_vmWare target provides the packages needed to run eCos binaries
            on a standard i386 PC under wmWare."
}


target pc_usb_d12 {
        alias           { "i386 PC target with SoRo PC/104 D12 USB Slave" }
        packages        { CYGPKG_HAL_I386
                          CYGPKG_HAL_I386_GENERIC
                          CYGPKG_HAL_I386_PC
                          CYGPKG_HAL_I386_PCMB
                          CYGPKG_IO_PCI
                          CYGPKG_IO_SERIAL_GENERIC_16X5X
                          CYGPKG_IO_SERIAL_I386_PC
                          CYGPKG_IO_USB
                          CYGPKG_IO_USB_SLAVE
                          CYGPKG_DEVS_USB_D12
                          CYGPKG_DEVS_USB_I386_SOROD12
                          CYGPKG_DEVICES_WALLCLOCK_DALLAS_DS12887
                          CYGPKG_DEVICES_WALLCLOCK_I386_PC
        }
        description "
            Provides the packages needed to run eCos binaries
            on a standard i386 PC motherboard with USB Slave support for the
            Philips D12 chip."
}

# --------------------------------------------------------------------------
# Synthetic targets.
target linux {
        alias           { "Linux synthetic target" i386linux }
        packages        { CYGPKG_HAL_SYNTH
                      CYGPKG_HAL_SYNTH_I386
                      CYGPKG_DEVS_FLASH_SYNTH_V2
                      CYGPKG_DEVS_ETH_ECOSYNTH
                      CYGPKG_DEVS_WATCHDOG_SYNTH
                      CYGPKG_DEVS_WALLCLOCK_SYNTH      
                      CYGPKG_DEVS_FRAMEBUF_SYNTH
                      CYGPKG_DEVS_ADC_SYNTH
        }
        description "
            The linux target provides the 
            packages needed to run eCos binaries on top of the i386
            Linux kernel."
}

# --------------------------------------------------------------------------
# SPARClite targets

target sleb {
        alias           { "Fujitsu MB86800-MA01 board" }
        packages        { CYGPKG_HAL_SPARCLITE
                          CYGPKG_HAL_SPARCLITE_SLEB
                          CYGPKG_IO_SERIAL_SPARCLITE_SLEB
        }
        description "
            The sleb target provides the packages need to run eCos
            on a Fujitsu MB86800-MA01 board."
}

target sparclite_sim {
        alias           { "SPARClite simulator" sl_sim sparcl_sim }
        packages        { CYGPKG_HAL_SPARCLITE 
                          CYGPKG_HAL_SPARCLITE_SIM
        }
        description "
            The sparclite_sim target provides the packages need to run eCos
            on the SPARClite simulator."
}

# --------------------------------------------------------------------------
# SPARC V7/V8 targets

target sparc_erc32 {
        alias           { "ERC32 processor" erc32 }
        packages        { CYGPKG_HAL_SPARC 
                          CYGPKG_HAL_SPARC_ERC32
        }
        description "
            The sparc_erc32 target provides the packages need to run eCos
            on the ERC32 processor or TSIM/ERC32 simulator."
}

target sparc_leon {
        alias           { "LEON processor" leon }
        packages        { CYGPKG_HAL_SPARC 
                          CYGPKG_HAL_SPARC_LEON
        }
        description "
            The sparc_leon target provides the packages need to run eCos
            on the LEON processor or TSIM/LEON simulator."
}

# --------------------------------------------------------------------------
# PowerPC targets
target cme555 {
        alias           { "Axiom's CME555 board" }
        packages        { CYGPKG_HAL_POWERPC
                          CYGPKG_HAL_POWERPC_MPC5xx
                          CYGPKG_HAL_POWERPC_CME555
                          CYGPKG_DEVS_FLASH_CME555
                          CYGPKG_DEVS_FLASH_AMD_AM29XXXXX
                          CYGPKG_IO_SERIAL_POWERPC_MPC555
                          CYGPKG_DEVICES_WALLCLOCK_MPC5xx
        }
        description "
            The cme555 target provides the packages needed to run
            eCos on a CME555 MPC555 evaluation board from Axiom
            Manufacturing."
}

target ec555 {
        alias           { "Wuerz ec555" }
        packages        { CYGPKG_HAL_POWERPC
                          CYGPKG_HAL_POWERPC_MPC5xx
                          CYGPKG_HAL_POWERPC_EC555
                          CYGPKG_DEVS_FLASH_EC555
                          CYGPKG_DEVS_FLASH_AMD_AM29XXXXX
                          CYGPKG_IO_SERIAL_POWERPC_MPC555
                          CYGPKG_DEVICES_WALLCLOCK_MPC5xx
        }
        description "
            The ec555 target provides the packages needed to run
            eCos on a EC555 MPC555 development board from Wuerz
            elektronik."
}

target cma28x {
        alias           { "Cogent CMA286/287 board" cma286 cma287 }
        packages        { CYGPKG_HAL_POWERPC
                          CYGPKG_HAL_POWERPC_MPC8xx 
                          CYGPKG_HAL_POWERPC_COGENT
                          CYGPKG_IO_SERIAL_POWERPC_COGENT
        }
        description "
            The cma28x target provides the packages needed to run
            eCos on a Cogent CMA286 or CMA287 board."
}

target fads {
        alias           { "Motorola MPC8xxFADS board" }
        packages        { CYGPKG_HAL_POWERPC
                          CYGPKG_HAL_POWERPC_MPC8xx 
                          CYGPKG_HAL_POWERPC_FADS
        }
        description "
            The fads target provides the packages needed to run
            eCos on a Motorola MPC8xxFADS board."
}

target mbx {
        alias           { "Motorola MBX860/821 board" mbx860 mbx821 }
        packages        { CYGPKG_HAL_POWERPC
                          CYGPKG_HAL_POWERPC_MPC8xx
                          CYGPKG_HAL_POWERPC_MBX
                          CYGPKG_HAL_QUICC 
                          CYGPKG_IO_SERIAL_POWERPC_QUICC_SMC
                          CYGPKG_DEVS_ETH_POWERPC_QUICC
                          CYGPKG_DEVS_ETH_POWERPC_MBX
                          CYGPKG_DEVS_FLASH_MBX
                          CYGPKG_DEVS_FLASH_AMD_AM29XXXXX
        }
        description "
            The mbx target provides the packages needed to run
            eCos on a Motorola MBX860 or MBX821 board."
}

target ts6 {
        alias           { "Delphi TigerSHARC-6 board" Pleiades sixpack }
        packages        { CYGPKG_HAL_POWERPC
                          CYGPKG_HAL_POWERPC_MPC8260
                          CYGPKG_HAL_POWERPC_TS6
                          CYGPKG_DEVS_ETH_POWERPC_QUICC2
                          CYGPKG_IO_SERIAL_POWERPC_QUICC2_SCC
                          CYGPKG_DEVS_FLASH_TS6
                          CYGPKG_DEVS_FLASH_INTEL_28FXXX
        }
        description "
            The ts6 target provides the packages needed to run
            eCos on a Delphi TigerSHARC-6 board."
}

target vads {
        alias           { "Motorola MPC8260 VADS board" }
        packages        { CYGPKG_HAL_POWERPC
                          CYGPKG_HAL_POWERPC_MPC8260
                          CYGPKG_HAL_POWERPC_VADS
                          CYGPKG_IO_SERIAL_POWERPC_QUICC2_SCC
                          CYGPKG_DEVS_ETH_POWERPC_QUICC2
                          CYGPKG_DEVS_FLASH_VADS
                          CYGPKG_DEVS_FLASH_INTEL_28FXXX
        }
        description "
            The vads target provides the packages needed to run
            eCos on a Motorola MPC8260 VADS board."
}

target viper {
        alias           { "A&M Viper PPC860 board" viper860 }
        packages        { CYGPKG_HAL_POWERPC
                          CYGPKG_HAL_POWERPC_MPC8xx
                          CYGPKG_HAL_POWERPC_VIPER
                          CYGPKG_HAL_QUICC 
                          CYGPKG_IO_SERIAL_POWERPC_QUICC_SMC
                          CYGPKG_DEVS_ETH_POWERPC_FEC
                          CYGPKG_DEVS_ETH_POWERPC_VIPER
                          CYGPKG_DEVS_FLASH_VIPER
                          CYGPKG_DEVS_FLASH_AMD_AM29XXXXX
        }
        description "
            The viper target provides the packages needed to run
            eCos on a A&M Viper PPC860 board."
}

target psim {
        alias           { "PowerPC simulator" ppc_sim powerpc_sim }
        packages        { CYGPKG_HAL_POWERPC
                          CYGPKG_HAL_POWERPC_PPC60x
                          CYGPKG_HAL_POWERPC_SIM
        }
        description "
            The psim target provides the packages needed to run
            eCos in the PSIM simulator."
}

##-------------------------------------------------------------------------------------------
## Cogent CSB281 (PowerPC 8245) packages
##
package CYGPKG_HAL_POWERPC_CSB281 {
        alias           { "Cogent PowerPC 8245 board" hal_powerpc_csb281 }
        directory       hal/powerpc/csb281
        script          hal_powerpc_csb281.cdl
        hardware
        description "
            The CSB281 HAL package provides the support needed to run
            eCos on a Cogent PowerPC 8245 board."
}

package CYGPKG_DEVS_FLASH_CSB281 {
        alias           { "FLASH memory support for Cogent PowerPC 8245 board" flash_csb281 }
        directory       devs/flash/powerpc/csb281
        script          flash_csb281.cdl
        hardware
        description "
           This package contains hardware support for FLASH memory
           on the Cogent CSB281 (PowerPC 8245) board."
}

package CYGPKG_DEVS_ETH_CSB281 {
        alias           { "Cogent CSB281 (PowerPC 8245) 82559 ethernet driver"
                           devs_eth_csb281 }
        hardware
        directory       devs/eth/powerpc/csb281
        script          csb281_eth_drivers.cdl
        description     "Ethernet driver for Cogent CSB281 (PowerPC 8245)
                         with Intel i82559 ethernet interfaces."
}

target csb281 {
        alias           { "Cogent PowerPC 8245" cogent8245 }
        packages        { CYGPKG_HAL_POWERPC
                          CYGPKG_HAL_POWERPC_PPC60x
                          CYGPKG_HAL_POWERPC_CSB281
                          CYGPKG_DEVS_FLASH_STRATA
                          CYGPKG_DEVS_FLASH_CSB281
                          CYGPKG_IO_PCI
                          CYGPKG_DEVS_ETH_CSB281
                          CYGPKG_DEVS_ETH_INTEL_I82559
        }
        description "
            The csb281 target provides the packages needed to run
            eCos on the Cogent CSB281 (8245) board."
}
##-------------------------------------------------------------------------------------------

# --------------------------------------------------------------------------
# MIPS targets

target jmr3904 {
        alias           { "Toshiba JMR-TX3904 board" jmr tx39 }
        packages        { CYGPKG_HAL_MIPS
                          CYGPKG_HAL_MIPS_TX39
                          CYGPKG_HAL_MIPS_TX39_JMR3904
                          CYGPKG_IO_SERIAL_TX39_JMR3904
        }
        description "
           The jmr3904 target provides the packages needed to run
           eCos on a Toshiba JMR-TX3904 board. This target can also
           be used when running in the full simulator, since the simulator provides an
           accurate simulation of the hardware including I/O devices.
           To use the simulator in this mode the command
           `target sim --board=jmr3904' should be used from inside gdb."
}

target atlas_mips32_4kc {
        alias           { "MIPS Atlas board with Mips32 4Kc processor" }
        packages        { CYGPKG_HAL_MIPS
                          CYGPKG_HAL_MIPS_MIPS32
                          CYGPKG_HAL_MIPS_ATLAS
                          CYGPKG_IO_SERIAL_MIPS_ATLAS
                          CYGPKG_DEVS_FLASH_ATLAS
                          CYGPKG_DEVS_ETH_MIPS_ATLAS
                          CYGPKG_IO_PCI
        }
    set_value CYGHWR_HAL_MIPS_MIPS32_CORE "4Kc"
        description "
           The atlas_mips32_4Kc target provides the packages needed to run
           eCos on a MIPS Atlas board with a Mips32 4Kc processor."
}

target atlas_mips64_5kc {
        alias           { "MIPS Atlas board with Mips64 5Kc processor" ruby }
        packages        { CYGPKG_HAL_MIPS
                          CYGPKG_HAL_MIPS_MIPS64
                          CYGPKG_HAL_MIPS_ATLAS
                          CYGPKG_IO_SERIAL_MIPS_ATLAS
                          CYGPKG_DEVS_FLASH_ATLAS
                          CYGPKG_DEVS_ETH_MIPS_ATLAS
        }
    set_value CYGHWR_HAL_MIPS_MIPS64_CORE "5K"
        description "
           The atlas_mips32_5Kc target provides the packages needed to run
           eCos on a MIPS Atlas board with a Mips64 5Kc processor."
}
target malta_mips32_4kc {
        alias           { "MIPS Malta board with Mips32 4Kc processor" }
        packages        { CYGPKG_HAL_MIPS
                          CYGPKG_HAL_MIPS_MIPS32
                          CYGPKG_HAL_MIPS_MALTA
                          CYGPKG_DEVS_FLASH_INTEL_28FXXX
                          CYGPKG_DEVS_FLASH_MALTA
                          CYGPKG_IO_PCI
                          CYGPKG_DEVS_ETH_AMD_PCNET
                          CYGPKG_DEVS_ETH_MIPS_MIPS32_MALTA
        }
        set_value CYGHWR_HAL_MIPS_MIPS32_CORE "4Kc"
        description "
           The malta_mips32_4Kc target provides the packages needed to run
           eCos on a MIPS Malta board with a Mips32 4Kc processor."
}

target malta_mips64_5kc {
        alias           { "MIPS Malta board with Mips64 5Kc processor" }
        packages        { CYGPKG_HAL_MIPS
                          CYGPKG_HAL_MIPS_MIPS64
                          CYGPKG_HAL_MIPS_MALTA
                          CYGPKG_DEVS_FLASH_INTEL_28FXXX
                          CYGPKG_DEVS_FLASH_MALTA
                          CYGPKG_IO_PCI
                          CYGPKG_DEVS_ETH_AMD_PCNET
                          CYGPKG_DEVS_ETH_MIPS_MIPS32_MALTA
        }
        set_value CYGHWR_HAL_MIPS_MIPS64_CORE "5K"
        description "
           The malta_mips64_5Kc target provides the packages needed to run
           eCos on a MIPS Malta board with a Mips64 5Kc processor."
}
target tx39_sim {
        alias           { "TX39 minimal simulator" }
        packages        { CYGPKG_HAL_MIPS
                          CYGPKG_HAL_MIPS_TX39
                          CYGPKG_HAL_MIPS_SIM
        }
        description "
           The tx39_sim target provides the packages needed to run
           eCos in the TX39 minimal simulator. To use this minimal
           simulator the command `target sim --board=jmr3904pal'
           should be used from inside gdb. It is not possible to
           use any of the eCos device drivers when the simulator
           is running in this mode."
}
target ref4955 {
        alias           { "Toshiba TX4955 reference platform" tx49 }
        packages        { CYGPKG_HAL_MIPS
                          CYGPKG_HAL_MIPS_TX49
                          CYGPKG_HAL_MIPS_TX49_REF4955
                          CYGPKG_IO_SERIAL_GENERIC_16X5X
                          CYGPKG_IO_SERIAL_MIPS_REF4955
                          CYGPKG_DEVICES_WALLCLOCK_MIPS_REF4955
                          CYGPKG_DEVICES_WALLCLOCK_DALLAS_DS1742
        }
        description "
           The ref4955 target provides the packages needed to run
           eCos on a Toshiba TX4955 reference platform."
}

target ocelot {
        alias           { "PMC-Sierra Ocelot platform" }
        packages        { CYGPKG_HAL_MIPS
                          CYGPKG_HAL_MIPS_RM7000
                          CYGPKG_HAL_MIPS_RM7000_OCELOT
                          CYGPKG_IO_PCI
                          CYGPKG_DEVS_FLASH_MIPS_OCELOT
                          CYGPKG_DEVS_FLASH_AMD_AM29XXXXX
                          CYGPKG_IO_SERIAL_GENERIC_16X5X
                          CYGPKG_DEVS_ETH_INTEL_I82559
                          CYGPKG_DEVS_ETH_MIPS_RM7000_OCELOT
        }
        description "
           The ocelot target provides the packages needed to run
           eCos on a PMC-Sierra Ocelot Hot-Swap Computer."
}

target vrc4373 {
        alias           { "NEC VRC4373 board" }
        packages        { CYGPKG_HAL_MIPS
                          CYGPKG_HAL_MIPS_VR4300
                          CYGPKG_HAL_MIPS_VR4300_VRC4373
                          CYGPKG_HAL_MIPS_VR4300_VRC437X
                          CYGPKG_IO_SERIAL_MIPS_VRC437X
                          CYGPKG_DEVS_FLASH_MIPS_VRC437X
                          CYGPKG_DEVS_FLASH_AMD_AM29XXXXX
                          CYGPKG_IO_PCI
        }
        description "
           The vrc4373 target provides the packages needed to run
           eCos on an NEC VRC4373 board."
}
target vrc4375 {
        alias           { "NEC VRC4375 board" }
        packages        { CYGPKG_HAL_MIPS
                          CYGPKG_HAL_MIPS_VR4300
                          CYGPKG_HAL_MIPS_VR4300_VRC4375
                          CYGPKG_HAL_MIPS_VR4300_VRC437X
                          CYGPKG_IO_SERIAL_MIPS_VRC437X
                          CYGPKG_DEVS_FLASH_MIPS_VRC437X
                          CYGPKG_DEVS_FLASH_AMD_AM29XXXXX
                          CYGPKG_IO_PCI
                          CYGPKG_DEVS_ETH_INTEL_I21143
                          CYGPKG_DEVS_ETH_MIPS_VRC4375
        }
        description "
           The vrc4375 target provides the packages needed to run
           eCos on an NEC VRC4375 board."
}

target refidt334 {
        alias           { "MIPS IDT79S334A reference platform" idt32334 }
        packages        { CYGPKG_HAL_MIPS
                          CYGPKG_HAL_MIPS_IDT32334
                          CYGPKG_HAL_MIPS_IDT32334_REFIDT334
                          CYGPKG_IO_PCI
                          CYGPKG_DEVS_ETH_INTEL_I82559
                          CYGPKG_DEVS_ETH_MIPS_REFIDT334
                          CYGPKG_DEVS_FLASH_MIPS_REFIDT334
                          CYGPKG_DEVS_FLASH_AMD_AM29XXXXX
                          CYGPKG_IO_SERIAL_MIPS_IDT79S334A
        }
        description "
           The refidt334 target provides the packages needed to run
           eCos on a MIPS IDT IDT79S334A reference board."
}

# --------------------------------------------------------------------------
# MN10300 targets

target am31_sim {
        alias           { "MN10300 AM31 minimal simulator" }
        packages        { CYGPKG_HAL_MN10300
                          CYGPKG_HAL_MN10300_AM31
                          CYGPKG_HAL_MN10300_AM31_SIM
        }
        description "
           The am31_sim target provides the packages need to run
           eCos in the MN10300 minimal simulator. It is not possible to
           use any of the eCos device drivers when the simulator
           is running in this mode."
}

target stdeval1 {
        alias           { "Matsushita stdeval1 board" }
        packages        { CYGPKG_HAL_MN10300 
                          CYGPKG_HAL_MN10300_AM31_STDEVAL1 
                          CYGPKG_HAL_MN10300_AM31 
                          CYGPKG_IO_SERIAL_MN10300
                          CYGPKG_DEVICES_WATCHDOG_MN10300_MN10300
        }
        description "
           The stdeval1 target provides the packages needed to run
           eCos on a Matsushita stdeval1 board. This target can also
           be used when running in the full simulator, since the simulator provides an
           accurate simulation of the hardware including I/O devices."
}
target stb {
        alias           { "Matsushita STB board" }
        packages        { CYGPKG_HAL_MN10300
                          CYGPKG_HAL_MN10300_AM33_STB
                          CYGPKG_HAL_MN10300_AM33
                          CYGPKG_IO_SERIAL_MN10300
                          CYGPKG_DEVS_FLASH_AMD_AM29XXXXX
                          CYGPKG_DEVS_FLASH_MN10300_STB
                          CYGPKG_DEVICES_WATCHDOG_MN10300_MN10300
        }
        description "
           The stb target provides the packages needed to run
           eCos on a Matsushita STB board."
}

target asb {
        alias           { "Matsushita ASB2303 board" }
        packages        { CYGPKG_HAL_MN10300
                          CYGPKG_HAL_MN10300_AM33_ASB
                          CYGPKG_HAL_MN10300_AM33
                          CYGPKG_DEVS_FLASH_AMD_AM29XXXXX
                          CYGPKG_DEVS_FLASH_MN10300_ASB2303
        }
        description "
           The asb target provides the packages needed to run
           eCos on a Matsushita ASB2303 board."
}

target asb2305 {
        alias           { "Matsushita ASB2305 board" }
        packages        { CYGPKG_HAL_MN10300
                          CYGPKG_HAL_MN10300_AM33_ASB2305
                          CYGPKG_HAL_MN10300_AM33
                          CYGPKG_IO_SERIAL_GENERIC_16X5X
                          CYGPKG_DEVS_FLASH_AMD_AM29XXXXX
                          CYGPKG_DEVS_FLASH_MN10300_ASB2305
        }
        description "
           The asb2305 target provides the packages needed to run
           eCos on a Matsushita ASB2305 board."
}

# --------------------------------------------------------------------------
# NEC targets

target ceb_v850 {
        alias { "Cosmo CEB-V850 board" CEB ceb_v850_sa1 }
        packages { CYGPKG_HAL_V85X
                   CYGPKG_HAL_V85X_V850
                   CYGPKG_HAL_V85X_V850_CEB
                   CYGPKG_IO_SERIAL_V85X_V850
        }
        description "
The ceb_v850 target provides the packages needed to run eCos on a
Cosmo CEB-V850 evaluation board fitted with a NEC V850/SA1 or NEC V850/SB1."
}

# --------------------------------------------------------------------------
# m68k targets

target m5272c3 {
    alias { "Freescale m5272c3 evaluation board" }
    packages {
        CYGPKG_HAL_M68K
        CYGPKG_HAL_M68K_MCFxxxx
        CYGPKG_HAL_M68K_MCF5272
        CYGPKG_HAL_M68K_M5272C3
        CYGPKG_DEVS_ETH_MCFxxxx
        CYGPKG_DEVS_SERIAL_MCFxxxx
        CYGPKG_DEVS_FLASH_AMD_AM29XXXXX_V2
    }

    description   "The m5272c3 target provides  the packages  needed to  run
                eCos on the Freescale m5272c3 evaluation board."
}

# --------------------------------------------------------------------------
# H8 targets

target h8300h_sim {
        alias           { "H8/300H minimal simulator" }
        packages        { CYGPKG_HAL_H8300
                          CYGPKG_HAL_H8300_H8300H
                          CYGPKG_HAL_H8300_H8300H_SIM
                          CYGPKG_IO_SERIAL_H8300_SCI
        }
        description "
           The h8300h_sim target provides the packages need to run
           eCos in the H8/300H minimal simulator. It is not possible to
           use any of the eCos device drivers when the simulator
           is running in this mode."
}

target h8s_sim {
        alias           { "H8S minimal simulator" }
        packages        { CYGPKG_HAL_H8300
                          CYGPKG_HAL_H8300_H8S
                          CYGPKG_HAL_H8300_H8S_SIM
                          CYGPKG_IO_SERIAL_H8300_SCI
        }
        description "
           The h8300h_sim target provides the packages need to run
           eCos in the H8/300H minimal simulator. It is not possible to
           use any of the eCos device drivers when the simulator
           is running in this mode."
}

target aki3068net {
        alias           { "Akizuki H8/3068 Network board" }
        packages        { CYGPKG_HAL_H8300
                          CYGPKG_HAL_H8300_H8300H
                          CYGPKG_HAL_H8300_H8300H_AKI3068NET
                          CYGPKG_IO_SERIAL_H8300_SCI
                          CYGPKG_DEVS_ETH_H8300_AKI3068NET
                          CYGPKG_DEVICES_WATCHDOG_H8300_H8300H
        }
        description "
           The aki3068net target provides the packages need to run
           eCos in the Akizuki H8/3068 Network board."
}

target h8max {
        alias           { "H8MAX" }
        packages        { CYGPKG_HAL_H8300
                          CYGPKG_HAL_H8300_H8300H
                          CYGPKG_HAL_H8300_H8300H_H8MAX
                          CYGPKG_IO_SERIAL_H8300_SCI
                          CYGPKG_DEVS_ETH_H8300_H8MAX
                          CYGPKG_DEVICES_WATCHDOG_H8300_H8300H
        }
        description "
           The h8max target provides the packages need to run
           eCos in the strawberry-linux.com H8MAX board."
}

target edosk2674 {
        alias           { "EDOSK-2674" }
        packages        { CYGPKG_HAL_H8300
                          CYGPKG_HAL_H8300_H8S
                          CYGPKG_HAL_H8300_H8S_EDOSK2674
                          CYGPKG_IO_SERIAL_H8300_SCI
                          CYGPKG_DEVS_ETH_H8300_EDOSK2674
        }
        description "
           The h8max target provides the packages need to run
           eCos in the Hitachi Micro System Europe EDOSK-2674 Evalution board."
}

# --------------------------------------------------------------------------
# CalmRISC16 targets

target calm16_ceb {
        alias           { "CalmRISC16 Core Eval Board" }
        packages        { CYGPKG_HAL_CALM16
                          CYGPKG_HAL_CALM16_CORE
                          CYGPKG_HAL_CALM16_CEB
        }
        description "
           The calm16_ceb target provides the packages needed to run
           eCos on the CalmRISC16 Core Evaluation Board."
}
# --------------------------------------------------------------------------
# CalmRISC32 targets

target calm32_ceb {
        alias           { "CalmRISC32 Core Eval Board" }
        packages        { CYGPKG_HAL_CALM32
                          CYGPKG_HAL_CALM32_CORE
                          CYGPKG_HAL_CALM32_CEB
        }
        description "
           The calm32_ceb target provides the packages needed to run
           eCos on the CalmRISC32 Core Evaluation Board."
}

# --------------------------------------------------------------------------

package CYGPKG_HAL_POWERPC_TS1000 {
        alias           { "Allied Telesyn TS1000 board" hal_powerpc_ts1000 }
        directory       hal/powerpc/ts1000
        script          hal_powerpc_ts1000.cdl
        hardware
        description "
            The TS1000 HAL package provides the support needed to run
            eCos on a Allied Telesyn TS1000 board equipped with a PowerPC processor."
}

package CYGPKG_DEVS_FLASH_POWERPC_TS1000 {
        alias           { "FLASH memory support for Allied Telesyn TS1000 (PPC855) board" flash_ts1000 }
        directory       devs/flash/powerpc/ts1000
        script          flash_ts1000.cdl
        hardware
        description "
           This package contains hardware support for FLASH memory
           on the Allied Telesyn TS1000 (PPC855) platform."
}

package CYGPKG_DEVS_ETH_POWERPC_TS1000 {
        alias           { "Allied Telesyn TS1000 ethernet driver" ts1000_eth_driver }
        hardware
        directory       devs/eth/powerpc/ts1000
        script          ts1000_eth_drivers.cdl
        description     "Ethernet driver specifics for Allied Telesyn TS1000 (MPC855T) based boards."
}

target ts1000 {
        alias           { "Allied Telesyn TS1000 board" ts1000_855 }
        packages        { CYGPKG_HAL_POWERPC
                          CYGPKG_HAL_POWERPC_MPC8xx
                          CYGPKG_HAL_POWERPC_TS1000
                          CYGPKG_HAL_QUICC 
                          CYGPKG_DEVS_FLASH_POWERPC_TS1000
                          CYGPKG_DEVS_FLASH_AMD_AM29XXXXX
                          CYGPKG_DEVS_ETH_POWERPC_FEC
                          CYGPKG_DEVS_ETH_POWERPC_TS1000
                          CYGPKG_IO_SERIAL_POWERPC_QUICC_SMC
        }
        description "
            The ts1000 target provides the packages needed to run
            eCos on a Allied Telesyn TS1000 (PPC855T) board."
}


# --------------------------------------------------------------------------
# OpenRISC targets

package CYGPKG_HAL_OPENRISC {
        alias           { "OpenRISC HAL" hal_openrisc openrisc_hal }
        directory       hal/openrisc/arch
        script          hal_openrisc.cdl
        hardware
        description "
           The OpenRISC architecture HAL package provides generic
           support for this processor architecture. It is also necessary to
           select a specific target platform HAL package."
}

package CYGPKG_HAL_OPENRISC_ORPSOC {
        alias           { "OpenRISC Reference Platform System-on-Chip" hal_orpsoc orpsoc_hal }
        directory       hal/openrisc/orpsoc
        script          hal_openrisc_orpsoc.cdl
        hardware
        description "
           The OpenRISC Reference Platform System-on-Chip package should be 
           used with ORPSoC compilant simulators or hardware. "
}

target ORPSoC {
        alias           { "OpenRISC Reference Platform System-on-Chip" orpsoc }
        packages        { CYGPKG_HAL_OPENRISC
                          CYGPKG_HAL_OPENRISC_ORPSOC
                          CYGPKG_DEVS_SPI_OPENCORES_SIMPLE_SPI
                          CYGPKG_DEVS_ETH_OPENCORES_ETHMAC
                          CYGPKG_DEVS_DISK_OPENCORES_SDCMSC
        }
        description "
           The ORPSoC (OpenRISC Reference Platform System-on-Chip) target 
           provides the packages needed to run eCos in simulator or
           hardware environments that conform to the OpenRISC Reference
           Platform System-on-Chip."
}

# --------------------------------------------------------------------------

package CYGPKG_DEVS_FLASH_UE250 {
        alias           { "FLASH memory support for uE250" flash_uE250 }
        directory       devs/flash/arm/uE250
        script          flash_uE250.cdl
        hardware
        description "
           This package contains hardware support for FLASH memory
           on the uE250 platform."
}

package CYGPKG_DEVS_ETH_ARM_XSCALE_UE250 {
        alias           { "NMI uE250 PCI ethernet driver" devs_eth_arm_ue250 }
        hardware
        directory       devs/eth/arm/uE250
        script          uE250_eth_drivers.cdl
        description     "Ethernet driver for NMI uE250 via PCI card."
}

package CYGPKG_HAL_ARM_XSCALE_UE250 {
        alias           { "NMI uEngine uE250" hal_arm_xscale_uE250 }
        directory       hal/arm/xscale/uE250
        script          hal_arm_xscale_uE250.cdl
        hardware
        description "
        The UE250 HAL package provides the support needed to run
        eCos on an NMI uEngine u250 board."
}

target uE250 {
        alias { "NMI uEngine uE250 Board" ue250 }
        packages { CYGPKG_HAL_ARM
                   CYGPKG_HAL_ARM_XSCALE_CORE
                   CYGPKG_HAL_ARM_XSCALE_PXA2X0
                   CYGPKG_HAL_ARM_XSCALE_UE250
                   CYGPKG_IO_PCI
                   CYGPKG_IO_SERIAL_GENERIC_16X5X
                   CYGPKG_DEVS_FLASH_STRATA
                   CYGPKG_DEVS_FLASH_UE250
                   CYGPKG_DEVS_ETH_NS_DP83902A
                   CYGPKG_DEVS_ETH_ARM_XSCALE_UE250
        }
        description "
        The uE250 target provides the packages needed to run
        eCos on an NMI uEngine uE250 board."
}

# --------------------------------------------------------------------------

package CYGPKG_DEVS_FLASH_PICASSO {
        alias           { "FLASH memory support for picasso" flash_picasso }
        directory       devs/flash/arm/picasso
        script          flash_picasso.cdl
        hardware
        description "
           This package contains hardware support for FLASH memory
           on the picasso platform."
}

package CYGPKG_DEVS_ETH_ARM_XSCALE_PICASSO {
        alias           { "NMI picasso PCI ethernet driver" devs_eth_arm_picasso }
        hardware
        directory       devs/eth/arm/picasso
        script          picasso_eth_drivers.cdl
        description     "Ethernet driver for NMI picasso via PCI card."
}

package CYGPKG_HAL_ARM_XSCALE_PICASSO {
        alias           { "NMI uEngine picasso" hal_arm_xscale_picasso }
        directory       hal/arm/xscale/picasso
        script          hal_arm_xscale_picasso.cdl
        hardware
        description "
        The PICASSO HAL package provides the support needed to run
        eCos on an NMI uEngine u250 board."
}

target picasso {
        alias { "NMI uEngine picasso Board" }
        packages { CYGPKG_HAL_ARM
                   CYGPKG_HAL_ARM_XSCALE_CORE
                   CYGPKG_HAL_ARM_XSCALE_PXA2X0
                   CYGPKG_HAL_ARM_XSCALE_PICASSO
                   CYGPKG_IO_PCI
                   CYGPKG_IO_SERIAL_GENERIC_16X5X
                   CYGPKG_DEVS_FLASH_STRATA
                   CYGPKG_DEVS_FLASH_PICASSO
                   CYGPKG_DEVS_ETH_NS_DP83902A
                   CYGPKG_DEVS_ETH_ARM_XSCALE_PICASSO
        }
        description "
        The picasso target provides the packages needed to run
        eCos on an NMI uEngine picasso board."
}

# --------------------------------------------------------------------------

package CYGPKG_HAL_POWERPC_ADDER {
        alias           { "A&M Adder PPC85x board" hal_powerpc_adder powerpc_adder_hal }
        directory       hal/powerpc/adder
        script          hal_powerpc_adder.cdl
        hardware
        description "
            The ADDER HAL package provides the support needed to run
            eCos on a A&M ADDER board equipped with a PowerPC processor."
}

package CYGPKG_DEVS_FLASH_POWERPC_ADDER {
        alias           { "FLASH memory support for A&M Adder PowerPC/85x" flash_adder }
        directory       devs/flash/powerpc/adder
        script          flash_adder.cdl
        hardware
        description "
           This package contains hardware support for FLASH memory
           on the A&M PowerPC/8xx ADDER platforms."
}

package CYGPKG_DEVS_ETH_POWERPC_ADDER {
        alias           { "A&M Adder ethernet driver" adder_eth_driver }
        hardware
        directory       devs/eth/powerpc/adder
        script          adder_eth_drivers.cdl
        description     "Ethernet driver specifics for A&M Adder (MPC85x) based boards."
}

package CYGPKG_DEVS_ETH_POWERPC_ADDERII {
        alias           { "A&M AdderII ethernet driver" adderII_eth_driver }
        hardware
        directory       devs/eth/powerpc/adderII
        script          adderII_eth_drivers.cdl
        description     "Ethernet driver specifics for A&M AdderII (MPC852T) based boards."
}

target adder {
        alias           { "A&M Adder PPC850 board" adder850 }
        packages        { CYGPKG_HAL_POWERPC
                          CYGPKG_HAL_POWERPC_MPC8xx
                          CYGPKG_HAL_POWERPC_ADDER
                          CYGPKG_HAL_QUICC 
                          CYGPKG_DEVS_FLASH_AMD_AM29XXXXX_V2
                          CYGPKG_DEVS_ETH_POWERPC_QUICC
                          CYGPKG_DEVS_ETH_POWERPC_ADDER
                          CYGPKG_IO_SERIAL_POWERPC_QUICC_SMC
        }
        enable { CYGHWR_HAL_POWERPC_ADDER_I }
        description "
            The adder target provides the packages needed to run
            eCos on a A&M Adder PPC850 board."
}

target adderII {
        alias           { "A&M Adder PPC852T board" adder852T }
        packages        { CYGPKG_HAL_POWERPC
                          CYGPKG_HAL_POWERPC_MPC8xx
                          CYGPKG_HAL_POWERPC_ADDER
                          CYGPKG_HAL_QUICC 
                          CYGPKG_DEVS_FLASH_AMD_AM29XXXXX_V2
                          CYGPKG_DEVS_ETH_POWERPC_FEC
                          CYGPKG_DEVS_ETH_POWERPC_ADDERII
                          CYGPKG_IO_SERIAL_POWERPC_QUICC_SMC
        }
        enable { CYGHWR_HAL_POWERPC_ADDER_II }
        description "
            The adderII target provides the packages needed to run
            eCos on a A&M Adder PPC852T board."
}

# --------------------------------------------------------------------------

package CYGPKG_HAL_POWERPC_RATTLER {
        alias           { "A&M Rattler MPC8250 board" hal_powerpc_rattler powerpc_rattler_hal }
        directory       hal/powerpc/rattler
        script          hal_powerpc_rattler.cdl
        hardware
        description "
            The RATTLER HAL package provides the support needed to run
            eCos on a A&M RATTLER board equipped with a PowerPC processor."
}

package CYGPKG_DEVS_ETH_POWERPC_RATTLER {
        alias           { "A&M Rattler ethernet driver" rattler_eth_driver }
        hardware
        directory       devs/eth/powerpc/rattler
        script          rattler_eth_drivers.cdl
        description     "Ethernet driver specifics for A&M Rattler (MPC8250) based boards."
}

package CYGPKG_DEVS_FLASH_POWERPC_RATTLER {
        alias           { "FLASH memory support for A&M Rattler (MPC8250)" flash_rattler }
        directory       devs/flash/powerpc/rattler
        script          flash_rattler.cdl
        hardware
        description "
           This package contains hardware support for FLASH memory
           on the A&M Rattler (MPC8250) platforms."
}

target rattler {
        alias           { "A&M Rattler (8250) board" }
        packages        { CYGPKG_HAL_POWERPC
                          CYGPKG_HAL_POWERPC_MPC8XXX
                          CYGPKG_HAL_POWERPC_RATTLER
                          CYGPKG_DEVS_FLASH_POWERPC_RATTLER
                          CYGPKG_DEVS_FLASH_AMD_AM29XXXXX
                          CYGPKG_DEVS_ETH_POWERPC_FCC
                          CYGPKG_DEVS_ETH_POWERPC_RATTLER
                          CYGPKG_DEVS_ETH_PHY
                          CYGPKG_IO_SERIAL_POWERPC_MPC8XXX
        }
        description "
            The rattler target provides the packages needed to run
            eCos on an Analogue & Micro Rattler (MPC8250) board."
}

##-------------------------------------------------------------------------------------------
## TAMS MOAB (PowerPC 405GPr) packages
##
package CYGPKG_HAL_POWERPC_MOAB {
        alias           { "TAMS PowerPC 405GP board" hal_powerpc_moab }
        directory       hal/powerpc/moab
        script          hal_powerpc_moab.cdl
        hardware
        description "
            The MOAB HAL package provides the support needed to run
            eCos on a TAMS PowerPC 405GP board."
}

package CYGPKG_DEVS_FLASH_POWERPC_MOAB {
        alias           { "FLASH memory support for MOAB" flash_moab }
        directory       devs/flash/powerpc/moab
        script          flash_moab.cdl
        hardware
        description "
           This package contains hardware support for both the boot FLASH 
           and NAND (main) memory on the MOAB platform."
}

package CYGPKG_DEVS_ETH_POWERPC_MOAB {
        alias           { "TAMS PowerPC 405GP ethernet support" moab_eth_driver }
        hardware
        directory       devs/eth/powerpc/moab
        script          moab_eth_drivers.cdl
        description     "Ethernet driver specifics for TAMS MOAB (PPC405GP) based boards."
}

package CYGPKG_DEVICES_WALLCLOCK_POWERPC_MOAB {
         alias          { "MOAB RTC device" devs_wallclock_moab_ds1307 moab_rtc }
         hardware
         directory      devs/wallclock/powerpc/moab
         script         moab_wallclock_drivers.cdl
         description    "
            RTC driver for MOAB (PowerPC PPC405GPr) using a
            Dallas DS1307 RTC."
}

target moab {
        alias           { "TAMS PowerPC 405GPr" moab405GPr }
        packages        { CYGPKG_HAL_POWERPC
                          CYGPKG_HAL_POWERPC_PPC40x
                          CYGPKG_HAL_POWERPC_MOAB
                          CYGPKG_DEVS_FLASH_POWERPC_MOAB
                          CYGPKG_DEVS_FLASH_ATMEL_AT49XXXX
                          CYGPKG_DEVS_FLASH_TOSHIBA_TC58XXX
                          CYGPKG_DEVS_ETH_POWERPC_MOAB
                          CYGPKG_DEVS_ETH_POWERPC_PPC405
                          CYGPKG_DEVS_ETH_NS_DP83816
                          CYGPKG_DEVS_ETH_PHY
                          CYGPKG_IO_PCI
                          CYGPKG_DEVICES_WALLCLOCK_DALLAS_DS1307
                          CYGPKG_DEVICES_WALLCLOCK_POWERPC_MOAB
                          CYGPKG_IO_SERIAL_GENERIC_16X5X
                          CYGPKG_IO_SERIAL_POWERPC_PPC405
        }
        description "
            The moab target provides the packages needed to run
            eCos on the TAMS MOAB (405GPr) board."
}
##-------------------------------------------------------------------------------------------

# --------------------------------------------------------------------------

# Realtek 8139 (PCI) Ethernet driver
package CYGPKG_DEVS_ETH_RLTK_8139 {
        alias           { "Realtek 8139 ethernet driver" rltk8139_eth_driver }
        hardware
        directory       devs/eth/rltk/8139
        script          rltk_8139_eth_drivers.cdl
        description     "Ethernet driver for Realtek 8139 (PCI) card."
}

package CYGPKG_DEVS_ETH_I386_PC_RLTK8139 {
        alias           { "Intel PC with Realtek 8139 ethernet driver" pc_rltk8139_eth_driver }
        hardware
        directory       devs/eth/i386/pc/rltk8139
        script          i386_pc_rltk8139_eth_drivers.cdl
        description     "Intel PC using Realtek 8139 (PCI) card."
}

package CYGPKG_DEVS_ETH_SH_DREAMCAST_RLTK8139 {
        alias           { "SEGA Dreamcast with BroadBandAdapter driver" dreamcast_rltk8139_eth_driver }
        hardware
        directory       devs/eth/sh/dreamcast
        script          sh_dreamcast_rltk8139_eth_drivers.cdl
        description     "SEGA Dreamcast with BroadBandAdapter."
}

target pc_rltk8139 {
        alias           { "i386 PC target with RTL8139 ethernet" }
        packages        { CYGPKG_HAL_I386
                          CYGPKG_HAL_I386_GENERIC
                          CYGPKG_HAL_I386_PC
                          CYGPKG_HAL_I386_PCMB
                          CYGPKG_IO_PCI
                          CYGPKG_IO_SERIAL_GENERIC_16X5X
                          CYGPKG_IO_SERIAL_I386_PC
                          CYGPKG_DEVS_ETH_RLTK_8139
                          CYGPKG_DEVS_ETH_I386_PC_RLTK8139
                          CYGPKG_DEVICES_WALLCLOCK_DALLAS_DS12887
                          CYGPKG_DEVICES_WALLCLOCK_I386_PC
        }
        description "
            The pc_rltk8139 target provides the packages needed to run eCos binaries 
            on a standard i386 PC motherboard, using a Realtek 8139 network card."
}

# --------------------------------------------------------------------------

package CYGPKG_HAL_ARM_GPS4020 {
        alias           { "GPS4020" hal_gps4020 }
        directory       hal/arm/gps4020
        script          hal_arm_gps4020.cdl
        hardware
        description "
            The GPS4020 HAL package provides the support needed to run
            eCos on a GPS 4020 board using the Firefly MF1 (ARM) processor."
}

package CYGPKG_DEVS_FLASH_GPS4020 {
        alias           { "FLASH memory support for GPS4020" flash_gps4020 }
        directory       devs/flash/arm/gps4020
        script          flash_gps4020.cdl
        hardware
        description "
           This package contains hardware support for FLASH memory
           on the GPS4020 platform."
}

package CYGPKG_IO_SERIAL_ARM_GPS4020 {
    alias             { "GPS4020 serial device drivers"
                        devs_serial_arm_gps4020 gps4020_serial_driver }
    hardware
    directory         devs/serial/arm/gps4020
    script            ser_arm_gps4020.cdl       
    description       "GPS4020 serial device drivers"
}

target gps4020 {
        alias           { "GPS 4020" gps_4020 gps}
        packages        { CYGPKG_HAL_ARM
                          CYGPKG_HAL_ARM_GPS4020
                          CYGPKG_DEVS_FLASH_ATMEL_AT49XXXX
                          CYGPKG_DEVS_FLASH_GPS4020
                          CYGPKG_IO_SERIAL_ARM_GPS4020
        }
        description "
            The gps4020 target provides the packages needed to run
            eCos on a GPS-4020 board."
}

# --------------------------------------------------------------------------

package CYGPKG_VNC_SERVER {
    alias       { "VNC server" vnc_server }
    directory   net/vnc_server
    script      vnc-server.cdl
    description "VNC server."
}

# --------------------------------------------------------------------------

package CYGPKG_DEVS_DISK_V85X_EDB_V850 {
    alias           { "Elatec v850 development board disk driver" edb_v850_disk }
    directory       devs/disk/v85x/edb_v850
    script          v85x_edb_v850_disk.cdl
    hardware
    description     "Disk driver for the Elatec v850 development board." 
}

package CYGPKG_DEVS_DISK_ECOSYNTH {
    alias           { "Synthetic target disk driver" ecosynthdisk ecosynth_disk_driver }
    directory       devs/disk/synth
    script          synthdisk.cdl
    hardware
    description     "Disk driver for the synthetic target."
}

package CYGPKG_DEVS_DISK_IDE {
    alias           { "Generic IDE disk driver" ide_disk }
    directory       devs/disk/ide
    script          ide_disk.cdl
    description     "Disk driver for generic IDE interface." 
}

package CYGPKG_DEVS_DISK_MMC {
    alias      { "Disk driver for MMC cards" mmcdisk mmc_disk_driver }
    directory  devs/disk/generic/mmc
    script     devs_disk_mmc.cdl
    hardware
    description "Disk driver for MMC cards"
}

package CYGPKG_DEVS_DISK_OPENCORES_SDCMSC {
    alias         { "SDCard Mass Storage Controller" sdcmsc }
    directory     devs/disk/opencores/sdcmsc
    script        devs_disk_opencores_sdcmsc.cdl
    description   "Disk driver for SDCard Mass Storage Controller."
}

package CYGPKG_DEVS_DISK_MMC_FREESCALE_DSPI {
    alias         { "MMC/SD disk over Freescale DSPI" }
    hardware
    directory     devs/disk/spi/freescale/dspi/mmc
    script        disk_mmc_freescale_dspi.cdl
    description   "
        This package provides a driver for MMC/SD disk attached to a
        Freescale DSPI interface."
}

package CYGPKG_IO_DISK {
    alias           { "Disk device drivers" disk io_disk }
    directory       io/disk
    script          io_disk.cdl
    description "
        This package contains drivers for basic I/O services on
        disk devices."
}

package CYGPKG_BLOCK_LIB {
    alias       { "Block cache and access library" blib block_lib }
    directory   services/blib
    script      blib.cdl
    description "
        This package contains the block cache and access library."
}

package CYGPKG_FS_FAT {
    alias       { "FAT Filesystem" fatfs fat_fs fs_fat }
    directory   fs/fat
    script      fatfs.cdl
    description "
        This package contains a FAT filesystem implementation."
}


# --------------------------------------------------------------------------

package CYGPKG_IO_FRAMEBUF {
        alias      { "Frame buffer support" framebuf framebuffer io_framebuf framebuf_io }
        directory  io/framebuf
        script     framebuf.cdl
        description "
          The generic frame buffer package provides an API for accessing
          frame buffer devices. It also provides support for writing
          the corresponding the device drivers."
}

package CYGPKG_DEVS_FRAMEBUF_SYNTH {
    alias               { "Synthetic target framebuffer device driver" devs_framebuf_synth synth_framebuf_driver }
    hardware
    directory           devs/framebuf/synth
    script              framebuf_synth.cdl
    
    description "
        This package provides a framebuffer device driver for the
        synthetic target."
}

# --------------------------------------------------------------------------

package CYGPKG_NET_LWIP {
        alias           {"lwIP networking stack" lwip}
        directory       net/lwip_tcpip
        script          cdl/lwip_net.cdl
        description     "Lightweight TCP/IP stack: lwIP"
}

package CYGPKG_ATHTTPD {
        alias           { "ATHTTP server" athttpd }
        directory       net/athttpd
        script          httpd.cdl
    description "Another Tiny HTTP server."
}


# ==========================================================================
# Cortex-M architecture support

package CYGPKG_HAL_CORTEXM {
        alias           { "Cortex-M common HAL" hal_cortexm cortexm_hal cortexm_arch_hal }
        directory       hal/cortexm/arch
        script          hal_cortexm.cdl
        hardware
        description "
        The CortexM architecture HAL package provides generic support for the ARM
        Cortex-M processor architecture. It is also necessary to select
        variant and platform HAL packages."
}

package CYGPKG_HAL_CORTEXM_LM3S {
    alias       { "Stellaris Cortex M3 variant HAL" hal_cortexm_lm3s }
    directory   hal/cortexm/lm3s/var
    script      hal_cortexm_lm3s.cdl
    hardware
    description "
        The Stellaris Cortex M3 HAL package provides the support needed
        to run eCos on targets based on the Stellaris Cortex M3 family
        of microcontrollers."
}

package CYGPKG_HAL_CORTEXM_LM3S8XX {
    alias       { "Stellaris 800 Series variant HAL" hal_cortexm_lm3s8xx }
    directory   hal/cortexm/lm3s/lm3s8xx/
    script      hal_cortexm_lm3s8xx.cdl
    hardware
    description "
        The Stellaris Cortex M3 800 Series HAL package provides the
        support needed to run eCos on targets based on the Stellaris
        Luminary Micro 800 Series family of microcontrollers."
}

package CYGPKG_HAL_CORTEXM_EK_LM3S811 {
    alias       { "Stellaris EK-LM3S811 HAL" hal_cortexm_ek_lm3s811 }
    directory   hal/cortexm/lm3s/ek_lm3s811
    script      hal_cortexm_ek_lm3s811.cdl
    hardware
    description "
        The ek-lm3s811 HAL package provides the support needed to run
        eCos on the Stellaris EK-LM3S811 board from Luminary Micro."
}

package CYGPKG_HAL_CORTEXM_LPC17XX {
        alias           { "NXP LPC17XX variant HAL" hal_cortexm_lpc17xx }
        directory       hal/cortexm/lpc17xx/var
        script          hal_cortexm_lpc17xx.cdl
        hardware
        description "
            The LPC 17XX HAL package provides the support needed to
            run eCos on targets based on the NXP LPC17XX family of
            microcontrollers."
}

package CYGPKG_HAL_CORTEXM_LPC17XX_LPC1766STK {
        alias           { "Olimex LPC-1766-STK HAL" hal_cortexm_lpc1766stk }
        directory       hal/cortexm/lpc17xx/lpc1766stk
        script          hal_cortexm_lpc17xx_lpc1766stk.cdl
        hardware
        description "
            The lpc1766stk HAL package provides the support needed to run
            eCos on the Olimex LPC-1766-STK board."
}

package CYGPKG_HAL_CORTEXM_STM32 {
        alias           { "ST STM32 variant HAL" hal_cortexm_stm32 }
        directory       hal/cortexm/stm32/var
        script          hal_cortexm_stm32.cdl
        hardware
        description "
        The STM32 HAL package provides the support needed to run
        eCos and RedBoot on targets based on the ST STM32
        family of microcontrollers."
}

package CYGPKG_HAL_CORTEXM_STM32_STM3210E_EVAL {
        alias           { "ST STM3210E EVAL HAL" hal_cortexm_stm3210e_eval }
        directory       hal/cortexm/stm32/stm3210e_eval
        script          hal_cortexm_stm32_stm3210e_eval.cdl
        hardware
        description "
        The stm3210e_eval HAL package provides the support needed to run
        eCos on the ST STM3210E EVAL board."
}

package CYGPKG_IO_SERIAL_CORTEXM_STM32 {
        alias           { "ST STM32 serial device drivers"
                          devs_serial_cortexm_stm32 stm32_serial_driver }
        hardware
        directory       devs/serial/cortexm/stm32
        script          ser_cortexm_stm32.cdl   
        description     "ST STM32 serial device driver"
}

package CYGPKG_DEVS_FLASH_STM32 {
        alias           { "Internal FLASH memory support for ST STM32" flash_stm32 }
        directory       devs/flash/cortexm/stm32
        script          flash_stm32.cdl
        hardware
        description "
        This package contains hardware support for the internal FLASH memory
        on the ST STM32 devices."
}

package CYGPKG_DEVS_SPI_CORTEXM_STM32 {
    alias         { "STM32 SPI driver" }
    hardware
    directory     devs/spi/cortexm/stm32
    script        spi_stm32.cdl
    description   "This package provides a driver for the SPI interfaces found on 
                  the ST STM32 microcontroller family."
}

package CYGPKG_DEVS_WALLCLOCK_STM32 {
        alias           { "ST STM32 RTC wallclock support" wallclock_stm32 }
        directory       devs/wallclock/cortexm/stm32
        script          wallclock_stm32.cdl
        hardware
        description "
        Wallclock support for on-chip RTC on STM32 devices.driver for the
        STM32 controller and compatibles"
}

package CYGPKG_DEVS_ADC_CORTEXM_STM32 {
    alias         { "STM32 ADC driver" adc_stm32 }
    hardware
    directory     devs/adc/cortexm/stm32
    script        adc_stm32.cdl
    description "
    This package provides a driver for the ADC interfaces found on the
    ST STM32 microcontroller family."
}

package CYGPKG_DEVS_USB_CORTEXM_STM32 {
        alias           { "ST STM32 USB slave support" usb_stm32 }
        directory       devs/usb/cortexm/stm32
        script          usb_stm32.cdl
        hardware
        description     "USB slave support for STM32 devices."
}

target stm3210e_eval {
        alias { "ST STM3210E EVAL board" stm3210e }
        packages { CYGPKG_HAL_CORTEXM
                   CYGPKG_HAL_CORTEXM_STM32
                   CYGPKG_HAL_CORTEXM_STM32_STM3210E_EVAL
                   CYGPKG_DEVS_FLASH_AMD_AM29XXXXX_V2
                   CYGPKG_DEVS_FLASH_STM32
                   CYGPKG_DEVS_FLASH_SPI_M25PXX
                   CYGPKG_IO_SERIAL_CORTEXM_STM32
                   CYGPKG_DEVS_WALLCLOCK_STM32
                   CYGPKG_IO_SPI
                   CYGPKG_DEVS_SPI_CORTEXM_STM32
                   CYGPKG_DEVS_ADC_CORTEXM_STM32
                   CYGPKG_IO_USB
                   CYGPKG_IO_USB_SLAVE
                   CYGPKG_DEVS_USB_CORTEXM_STM32
                 }
        description "The stm3210e_eval target provides the packages needed
        to run eCos on the STM3210E EVAL board."
}

target ek-lm3s811 {
        alias      { "Stellaris EK-LM3S811 board" }
        packages   { CYGPKG_HAL_CORTEXM
                     CYGPKG_HAL_CORTEXM_LM3S
                     CYGPKG_HAL_CORTEXM_LM3S8XX
                     CYGPKG_HAL_CORTEXM_EK_LM3S811
                     CYGPKG_DEVS_I2C_CORTEXM_LM3S
                     CYGPKG_DEVS_ADC_CORTEXM_LM3S
                     CYGPKG_IO_I2C
                    }
        description "
            The ek-lm3s811 target provides the packages needed to run eCos
            on the Stellaris EK-LM3S811 board from Luminary Micro."
}

target lpc1766stk {
        alias      { "Olimex LPC-1766-STK" lpc1766stk }
        packages   { CYGPKG_HAL_CORTEXM
                     CYGPKG_HAL_CORTEXM_LPC17XX
                     CYGPKG_HAL_CORTEXM_LPC17XX_LPC1766STK
                     CYGPKG_DEVICES_WALLCLOCK_ARM_LPC2XXX
                     CYGPKG_IO_SERIAL_GENERIC_16X5X
                     CYGPKG_IO_SERIAL_ARM_LPC24XX
                     CYGPKG_DEVS_ETH_PHY
                     CYGPKG_DEVS_ETH_ARM_LPC2XXX
                    }
        description "
            The lpc1766stk target provides the packages needed
            to run eCos on the Olimex LPC-1766-STK board."
}

package CYGPKG_HAL_FREESCALE_EDMA {
    alias         { "Freescale eDMA driver" }
    hardware
    directory     hal/misc/freescale/edma
    script        hal_freescale_edma.cdl
    description   "
        This package provides a library for the Freescale eDMA (Enhanced DMA)
        controller."
}

package CYGPKG_HAL_CORTEXM_KINETIS {
        alias           { "Freescale Kinetis variant HAL" hal_cortexm_kinetis }
        directory       hal/cortexm/kinetis/var
        script          hal_cortexm_kinetis.cdl
        hardware
        description "
        The Kinetis HAL package provides the support needed to run
        eCos on targets based on the Freescale Kinetis
        family of microcontrollers."
}

package CYGPKG_HAL_CORTEXM_KINETIS_TWR_K60N512 {
        alias           { "Freescale TWR-K60N512 HAL" hal_cortexm_twr_k60n512 }
        directory       hal/cortexm/kinetis/twr_k60n512
        script          hal_cortexm_kinetis_twr_k60n512.cdl
        hardware
        description "
        The TWR-K60N512 HAL package provides the support needed to run
        eCos on the Freescale Tower development system."
}

package CYGPKG_HAL_CORTEXM_KINETIS_TWR_K40X256 {
        alias           { "Freescale TWR-K40X256 HAL" hal_cortexm_twr_k40x256 }
        directory       hal/cortexm/kinetis/twr_k40x256
        script          hal_cortexm_kinetis_twr_k40x256.cdl
        hardware
        description "
        The TWR-K40X256 HAL package provides the support needed to run
        eCos on the Freescale Tower development system."
}

package CYGPKG_HAL_CORTEXM_KINETIS_TWR_K60N512_FXM {
        alias           { "Freescale TWR-K60N512-FXM HAL" hal_cortexm_twr_k60n512_fxm }
        directory       hal/cortexm/kinetis/twr_k60n512_fxm
        script          hal_cortexm_kinetis_twr_k60n512_fxm.cdl
        hardware
        description "
        The TWR-K60N512-FXM HAL package provides the support needed to run
        eCos on the Freescale Tower development system equpped with TWR-FXM module."
}

target freescale_twr_k60n512 {
        alias { "Freescale Kinetis TWR-K60N512" twr_k60n512 }
        packages { CYGPKG_HAL_CORTEXM
                   CYGPKG_HAL_CORTEXM_KINETIS
                   CYGPKG_HAL_CORTEXM_KINETIS_TWR_K60N512
                   CYGPKG_HAL_FREESCALE_EDMA
                   CYGPKG_IO_SERIAL_FREESCALE_UART_HDR
                   CYGPKG_IO_SERIAL_FREESCALE_UART
                   CYGPKG_DEVICES_WALLCLOCK_KINETIS_RTC
                   CYGPKG_DEVS_ETH_PHY
                   CYGPKG_DEVS_ETH_FREESCALE_ENET
                   CYGPKG_IO_SPI
                   CYGPKG_DEVS_SPI_FREESCALE_DSPI
                   CYGPKG_DEVS_DISK_MMC
                   CYGPKG_DEVS_DISK_MMC_FREESCALE_DSPI
                 }
        description "The freescale_twr_k60n512 target provides the packages needed
        to run eCos on the Freescale TWR-K60N512 development system."
}

target freescale_twr_k40x256 {
        alias { "Freescale Kinetis TWR-K40X256" twr_k40x256 }
        packages { CYGPKG_HAL_CORTEXM
                   CYGPKG_HAL_CORTEXM_KINETIS
                   CYGPKG_HAL_CORTEXM_KINETIS_TWR_K40X256
                   CYGPKG_HAL_FREESCALE_EDMA
                   CYGPKG_IO_SERIAL_FREESCALE_UART_HDR
                   CYGPKG_IO_SERIAL_FREESCALE_UART
                   CYGPKG_DEVICES_WALLCLOCK_KINETIS_RTC
                   CYGPKG_IO_SPI
                   CYGPKG_DEVS_SPI_FREESCALE_DSPI
                   CYGPKG_DEVS_DISK_MMC
                   CYGPKG_DEVS_DISK_MMC_FREESCALE_DSPI
                 }
        description "The freescale_twr_k40x256 target provides the packages needed
        to run eCos on the Freescale TWR-K40X256 development system."
}

target freescale_twr_k60n512_fxm {
        alias { "Freescale Kinetis TWR-K60N512-FXM" twr_k60n512_fxm }
        packages { CYGPKG_HAL_CORTEXM
                   CYGPKG_HAL_CORTEXM_KINETIS
                   CYGPKG_HAL_CORTEXM_KINETIS_TWR_K60N512_FXM
                   CYGPKG_HAL_FREESCALE_EDMA
                   CYGPKG_IO_SERIAL_FREESCALE_UART_HDR
                   CYGPKG_IO_SERIAL_FREESCALE_UART
                   CYGPKG_DEVICES_WALLCLOCK_KINETIS_RTC
                   CYGPKG_DEVS_ETH_PHY
                   CYGPKG_DEVS_ETH_FREESCALE_ENET
                   CYGPKG_DEVS_RAM_MICRON_CELLULARRAM
                   CYGPKG_IO_SPI
                   CYGPKG_DEVS_SPI_FREESCALE_DSPI
                   CYGPKG_DEVS_DISK_MMC
                   CYGPKG_DEVS_DISK_MMC_FREESCALE_DSPI
                   CYGPKG_DEVS_FLASH_SPI_SST25XX
                   CYGPKG_DEVS_FLASH_SST25XX_FREESCALE_DSPI
                 }
        description "
            The freescale_twr_k60n512_fxm target provides the packages needed
            to run eCos on the Freescale TWR-K60N512 development system
            equipped with TWR-FXM external memory module."
}

package CYGPKG_HAL_CORTEXM_A2FXXX {
    alias       { "Cortex-M3/Actel Smartfusion A2Fxxx variant HAL"  hal_cortexm_a2fxxx }
    directory   hal/cortexm/a2fxxx/var
    script      hal_cortexm_a2fxxx.cdl
    hardware
    description "
        The Actel A2Fxxx HAL package provides the support needed to run
        eCos and RedBoot on targets based on the Actel A2Fxxx
        family of microcontrollers."
}

package CYGPKG_HAL_CORTEXM_A2F200_EVAL {
    alias       { "Actel A2F200 EVAL HAL" hal_cortexm_a2f200_eval }
    directory   hal/cortexm/a2fxxx/a2f200_eval
    script      hal_cortexm_a2f200_eval.cdl
    hardware
    description "
        The Actel A2F200 HAL package provides the support needed to run
        eCos on the Actel A2F200 EVAL board."
}

package CYGPKG_DEVS_FLASH_CORTEXM_A2F200_EVAL {
     alias      { "Actel SmartFusion evaluation board flash support" a2fxxx_eval_flash_driver }
     hardware
     directory   devs/flash/cortexm/a2fxxx/a2f200_eval
     script      flash_a2f200_eval.cdl
     description  "
           Flash driver specifics for the Actel SmartFusion evaluation board (A2F200 EVAL)."
}

package CYGPKG_DEVS_ETH_CORTEXM_A2F200_EVAL {
    alias        { "Actel Smartfusion ethernet evaluation board support" a2f200_eval_eth_driver }
    hardware
    directory     devs/eth/cortexm/a2f200_eval
    script        a2f200_eval.cdl
    description   "Ethernet driver specifics for Actel Smartfusion evaluation boards (A2F200 EVAL)."
}


target smartfusion {
        alias { "Actel SmartFusion evaluation board (A2F200_EVAL)" smartfusion }
        packages { CYGPKG_HAL_CORTEXM
                   CYGPKG_HAL_CORTEXM_A2FXXX
                   CYGPKG_HAL_CORTEXM_A2F200_EVAL
                   CYGPKG_IO_SERIAL_GENERIC_16X5X
                   CYGPKG_IO_SERIAL_CORTEXM_A2FXXX
                   CYGPKG_IO_I2C
                   CYGPKG_DEVS_I2C_CORTEXM_A2FXXX
                   CYGPKG_DEVS_SPI_CORTEXM_A2FXXX
                   CYGPKG_IO_SPI
                   CYGPKG_DEVS_FLASH_SPI_AT25DFXXX
                   CYGPKG_DEVS_FLASH_CORTEXM_A2F200_EVAL
                   CYGPKG_DEVS_ETH_CORTEXM_A2F200_EVAL
                   CYGPKG_DEVS_ETH_CORTEXM_A2FXXX
                   CYGPKG_DEVS_ETH_PHY
                 }
        description "
        The a2f200_eval target provides the packages needed
        to run eCos on the Actel A2F200 EVAL (Smartfusion) board."
}


# ==========================================================================
# End of ecos.db

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.