OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [rtos/] [ecos-3.0/] [packages/] [hal/] [arm/] [arch/] [current/] [ChangeLog] - Rev 786

Compare with Previous | Blame | View Log

2009-03-06  John Dallaway  <john@dallaway.org.uk>

        * cdl/hal_arm.cdl: Merge goals for CYGHWR_THUMB and
        CYGBLD_ARM_ENABLE_THUMB_INTERWORK to allow selective application
        of CDL solutions within the eCos Configuration Tool.

2009-02-14  Jonathan Larmour  <jifl@eCosCentric.com>

        * src/vectors.S: Use .type xxx, function everywhere where
        a global associated with code is defined. Otherwise objdump
        treats it as data.

2009-02-09  Nick Garnett  <nickg@ecoscentric.com>

        * src/vectors.S (start): The loop to initialize BSS was using a
        BLS to terminate. This caused an extra zero to be stored beyond
        the end of __bss_end. Usually this is benign, but when __bss_end
        is at the very top of RAM, and the hardware generates an exception
        for illegal accesses, this can crash the program before it even
        starts. The fix is to use a BHI instructions and reverse the
        compare, which will terminate the loop 1 word earlier.

2009-02-02  Bart Veer  <bartv@ecoscentric.com>

        * cdl/hal_arm.cdl: add new architectural CFLAGS and LDFLAGS
        options.

2008-10-07  Jonathan Larmour  <jifl@eCosCentric.com>

        * src/arm.ld: Discard C++ EH-related sections when we can't
        possibly support C++ EH (no CYGPKG_LIBSTDCXX).

2008-09-27  Jonathan Larmour  <jifl@eCosCentric.com>

        * src/hal_mk_defs.c: Also export HAL_BREAKINST_THUMB and
        HAL_BREAKINST_ARM to asm.
        * src/arm.ld: Revise alignment yet further. Maintain ALIGN_LMA
        at original value, but define alignment for use in compliance
        with AAPCS. Expand explanatory comments.
        (SECTION_text): Comply with AAPCS alignment when inserting
        .ARM.extab and .ARM.exidx.      

2008-09-17  Jonathan Larmour  <jifl@eCosCentric.com>

        * src/arm.ld: Rework alignment further to improve backward
        compatibility. Improve commenting on alignment issues.

2008-08-26  Jonathan Larmour  <jifl@eCosCentric.com>

        * src/arm.ld: We need to be double-word aligned sometimes, so align
        LMA the same way too.

2008-07-24  Jonathan Larmour  <jifl@eCosCentric.com>

        * cdl/hal_arm.cdl (CYGBLD_HAL_ARM_EABI): EABI has a different C++
        EH implementation, so don't let LIBSTDCXX use the default one.

2008-06-04  Jonathan Larmour  <jifl@eCosCentric.com>

        * src/vectors.S: Correctly conditionalise overwriting (or not)
        of reset vector.

2008-05-28  Jonathan Larmour  <jifl@eCosCentric.com>

        * src/hal_misc.c (CONSTRUCTORS_END): Fix fencepost error.

2008-05-19  Jonathan Larmour  <jifl@eCosCentric.com>

        * include/arm_stub.h: Remove CYG_HAL_GDB_ENTER_CRITICAL_IO_REGION
        and CYG_HAL_GDB_LEAVE_CRITICAL_IO_REGION defines which should remain
        as their defaults.
        * src/arm.ld: Add SECTION_hal_vsr_table for targets which need the
        VSR table in a different location to the rest of the fixed vectors.
        * src/vectors.S: Allow hal_platform_setup.h to define
        CYGHWR_HAL_ARM_SEPARATE_VSR_TABLE to allow move of hal_vsr_table
        to its own section at a different address.

2008-05-12  Jonathan Larmour  <jifl@eCosCentric.com>

        * src/hal_mk_defs.c (main): Export exception vector info
        to asm.
        * src/arm.ld: Remove previous EABI support and instead use a
        different approach incorporating into existing SECTION macros for
        better backward compatibility.
        * src/hal_misc.c (cyg_hal_invoke_constructors): Rewrite init_array
        support for EABI.
        There is now nothing copyrightable remaining from Chris Zimman's
        earlier work in this package.

2008-05-09  Jonathan Larmour  <jifl@eCosCentric.com>

        * cdl/hal_arm.cdl: Rename EABI option. Set default from
        toolchain prefix and flags. Rewrite description.
        * include/hal_arch.h: Rename exception vector addresses to
        names less likely to potentially clash with applications.
        * src/vectors.S: Update vector address names in line with
        hal_arch.h change. Rename CYGNUM_HAL_VECTOR_TABLE ->
        CYGHWR_HAL_VECTOR_TABLE_BASE.

2008-05-09  Chris Zimman  <czimman@bloomberg.com>
2008-05-09  Jonathan Larmour  <jifl@eCosCentric.com>

        Some of the following changes were inspired by work from Chris
        Zimman. Further changes were also provided, but have not been
        included because either they are cosmetic (whitespace changes
        etc.) and thus will only make it more difficult to merge in future
        updates from public eCos code base in future, increase code size
        for those who don't need it, or break compatibility with public
        eCos.
        * cdl/hal_arm.cdl: Add EABI build option.
        * include/hal_arch.h: Add extra CPSR definitions, and exception
        vector addresses.
        * src/arm.ld: Add EABI support.
        * src/hal_misc.c: Add EABI constructor support.
        * src/vectors.S: Allow variant/processor/platform to specify
        alternate vector table base. Use pretty names from hal_arch.h
        for vector offset/addresses.

2007-10-15  Sergei Gavrikov <w3sg@SoftHome.net>

        * cdl/hal_arm.cdl: Use ACTUAL_CFLAGS whenever possible to avoid
        warnings and complaints from newer compilers.

2007-09-11  Andrew Lunn  <andrew.lunn@ascom.ch>

        * src/hal_misc.c: Include <cyg/infra/diag.h> to prevent compiler
        warning when CYGHWR_HAL_ARM_DUMP_EXCEPTIONS is enabled.
        Reported by Sergei Gavrikov <w3sg@SoftHome.net.

2007-02-03  Sergei Gavrikov  <sg@sgs.gomel.by>

        * src/vectors.S: Added a possibility to fix ARM vector 0x14
        (unused vector). Some platforms need itself in that.

2007-01-09  Sergei Gavrikov  <sg@sgs.gomel.by>

        * src/arm-stub.c: Added string.h header (`memcpy' declaration).
        
 
        * include/basetype.h: (CYG_DOUBLE_BYTEORDER): Add proper
        definition for VFP floating point format (uses "natural" byte
        order) on little-endian ARM.
 
2006-02-06  Sergei Organov  <osv@javad.com>

        * src/vectors.S: disable FIQ in IRQ handler to fix race condition
        of recursively entering IRQ handler through FIQ handler. Remove
        unreferenced handle_IRQ_or_FIQ label.
        
2006-01-18  Jay Foster    <jay@systech.com>

        * src/context.S (hal_thread_switch_context): Close race condition
        that could cause corruption of the sp or lr registers.

2005-04-21  Ian Campbell  <icampbell@arcom.com>

        * src/redboot_linux_exec.c: Added -t option which takes the
        physical address to copy to. Very useful for booting non-Linux
        operating systems.

2005-03-03  Andrew Lunn  <andrew.lunn@ascom.ch>

        * src/redboot_linux_exec.c (CYGARC_HAL_MMU_OFF_X): Fix compiler
        warning about spaces after continuation character.

2004-11-23  Jani Monoses <jani@iv.ro>

        * src/vectors.S: Allow DSRs in non-kernel configuration.
        
2004-10-07  Andrew Lunn  <andrew.lunn@ascom.ch>

        * src/arm_stub.c (target_ins): Added a cast to prevent a compiler
        warning.

2004-09-02  Mark Salter  <msalter@redhat.com>

        * cdl/hal_arm.cdl (CYGHWR_REDBOOT_LINUX_EXEC_X_SWITCH): New
        option used to enable "-x" option to exec command.
        
        * src/redboot_linux_exec.c (do_exec): Add support for booting
        kernels built for endianess oppposite of RedBoot.

2004-07-07  Gary Thomas  <gary@mlbassoc.com>

        * src/redboot_linux_exec.c (do_exec): Fix test for valid entry
        (was being overwritten by command line parameter)

2004-05-27  Gary Thomas  <gary@mlbassoc.com>

        * src/redboot_linux_exec.c (do_exec): Be sensitive to value in
        "entry_address" as this can indicate if the image to be executed
        is valid (the "load" functions set it to "NO_MEMORY" when invalid)

2004-05-24   Ian Campbell <icampbell@arcom.com>

        * src/hal_misc.c: __mem_fault_handler: Only do this if we have
        CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS. This allows the HAL to be 
        compiled without stubs.

2004-04-22  Jani Monoses <jani@iv.ro>

         * cdl/hal_arm.cdl :
         Invoke tail with stricter syntax that works in latest coreutils. 


        * include/hal_io.h: If defined HAL_IO_MACROS_NO_ADDRESS_MUNGING
        use macros which don't mung the addresses even if the platform
        is big-endian. Platforms which don't need address munging can
        just define HAL_IO_MACROS_NO_ADDRESS_MUNGING in plf_io.h .
 
2003-10-23  Thomas Koeller  <thomas.koeller@baslerweb.com>

        * src/vectors.S: Acknowlege spurious interrupts.

2003-10-13  Thomas Koeller  <thomas.koeller@baslerweb.com>

        * src/vectors.S: Fixed broken thumb mode exception handling.

2003-06-30  Mark Salter  <msalter@redhat.com>

        * src/vectors.S: Fix CYGOPT_HAL_ARM_PRESERVE_SVC_SPSR handling.

2003-06-24  Jonathan Larmour  <jifl@eCosCentric.com>

        * include/hal_arch.h: Include plf_arch.h or var_arch.h if platform
        or variant requires it to do overrides.
        (HAL_IDLE_THREAD_ACTION): Default to empty statement but allow to be
        overridden.
        
        * src/hal_misc.c: Remove hal_idle_thread_action. It's no use.

2003-05-06  Pierre Habraken  <Pierre.Habraken@imag.fr>

        * src/arm_stub.c (target_ins, target_thumb_ins): Added code to
        enable stepping into swi instructions.
        
        * cdl/hal_arm.cdl: Added option CYGOPT_HAL_ARM_PRESERVE_SVC_SPSR for
        securing exception and breakpoint processing triggered during
        execution of application specific SWI handlers. Added option
        CYGOPT_HAL_ARM_WITH_USER_MODE for supporting programs running in
        user mode.
        * src/vectors.S (return_from_exception): Added code to exception
        handling for preserving svc spsr before returning to svc mode.
        Added code to allow exceptions in user mode.
        (call_exception_handler, handle_IRQ_or_FIQ): Added code to allow
        exceptions in user mode.
        * include/hal_arch.h: Defined CPSR_USER_MODE.
        * src/hal_mk_defs.c.: Added definition for CPSR_USER_MODE.

2003-04-30  Jonathan Larmour  <jifl@eCosCentric.com>

        * src/vectors.S (handle_IRQ_or_FIQ): Tweak below to be conditional on
        __thumb__.


        * vectors.S (handle_IRQ_or_FIQ):
        Use thumb-aware call to hal_spurious_IRQ.

2003-04-13  Bart Veer  <bartv@ecoscentric.com>

        * src/vectors.S (start): fix build problem with -mthumb

2003-03-11  Mark Salter  <msalter@redhat.com>

        * src/redboot_linux_exec.c (do_exec): Call eth_drv_stop as necessary.

2003-02-13  Mark Salter  <msalter@redhat.com>

        * src/redboot_linux_exec.c (do_exec): Add missing semicolon.

2003-02-13  Gary Thomas  <gary@mlbassoc.com>

        * src/redboot_linux_exec.c (CYGHWR_REDBOOT_LINUX_ATAG_MEM): 
        Add CYG_MACRO_START/END markers.

2003-02-12  Gary Thomas  <gary@mlbassoc.com> inspired by
2003-02-12  Robin Farine <robin.farine@acn-group.ch>    

        * src/redboot_linux_exec.c: Allow platform to override memory layout.
        Also, give error if no "-b" option and base/load address unknown.       
2003-02-06  Gary Thomas  <gary@mlbassoc.com>

        * src/redboot_linux_exec.c: Make sure RAM description is sane.

2003-01-31  Mark Salter  <msalter@redhat.com>

        * src/hal_syscall.c (hal_syscall_handler): Let generic syscall code
        handle exit.

2003-01-17  Patrick Doyle  <wpd@delcomsys.com>

        * src/redboot_linux_exec.c (do_exec): Round the length up to a
        multiple of 4 so that the copy loop (which decrements the count by
        4 each time through) runs a finite length of time.
        
        Fixed the calculation of params->u.mem.size so that it doesn't
        double the memory size if it is already a power of two.

2003-01-06  Patrick Doyle  <wpd@delcomsys.com>

        * src/redboot_linux_exec.c (do_exec): Added support for, and
        changed to use, ATAG_INITRD2 instead of ATAG_INITRD.  ATAG_INITRD
        specifies the virtual address of the ramdisk while ATAG_INITRD2
        specifies the physical address.

2002-12-11  Mark Salter  <msalter@redhat.com>

        * include/hal_io.h: Allow variant or platform HALs to override
        default IO macros.

2002-11-12  Mark Salter  <msalter@redhat.com>

        * src/arm_stub.c (target_ins): Account for PC prefetch when PC is
        source register in data processing insns.

2002-08-29  Mark Salter  <msalter@redhat.com>

        * src/vectors.S: Avoid entering thumb mode in exception handlers.

2002-08-27  Mark Salter  <msalter@redhat.com>

        * src/arm.ld: Undefine arm to avoid problem with .note.arm.ident.

2002-08-22  Mark Salter  <msalter@redhat.com>

        * src/arm.ld: Add .note.arm.ident section used by tools to identify
        architecture variants.

2002-08-21  Mark Salter  <msalter@redhat.com>

        * src/arm_stub.c: Add support for large registers (e.g. FPU).
        * include/arm_stub.h: Add infrastructure for support of coprocessors.
        * include/hal_arch.h: Ditto.

2002-08-02  Andrew Lunn <Andrew.Lunn@ascom.ch>

        * cdl/hal_arm.cdl: Redboot exec command can now be disabled by CDL
        
2002-07-15  Mark Salter  <msalter@redhat.com>

        * include/arm_stub.h: Comment out NUMREGBYTES.

2002-05-28  Mark Salter  <msalter@redhat.com>

        * cdl/hal_arm.cdl: Tweaked description for
        CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS.
        Add CYGHWR_REDBOOT_ARM_LINUX_TAGS_ADDRESS.

        * src/redboot_linux_exec.c (do_exec): Rework transition to MMU
        off and jump to kernel so that it works for non 1-1 mapped
        platforms.

2002-05-20  Gary Thomas  <gthomas@redhat.com>

        * include/hal_io.h: Fix ...STRING macros - not using index.
        Pointed out by Thomas Koeller <thomas@koeller.dyndns.org>.

2002-05-09  Nick Garnett  <nickg@redhat.com>

        * src/vectors.S (handle_IRQ_or_FIQ): Save SVC mode LR in interrupt
        handling as well as exceptions.

        * src/context.S (hal_thread_switch_context): Use correct size
        for skipping new HAL_SavedRegisters fields.
        
2002-05-08  Jonathan Larmour  <jlarmour@redhat.com>

        * cdl/hal_arm.cdl: Remove -malignment-traps here - add it only from
        packages when needed.

2002-05-08  Nick Garnett  <nickg@redhat.com>

        * src/vectors.S: Added code to save and restore value of SVC mode
        LR during exception processing. If the exception comes from a
        non-SVC mode then handling it originally corrupted the SVC mode
        LR. If the program subsequent returned to SVC mode it was likely
        to have problems. The registers for modes other than SVC and the
        exception mode are not touched, so we do not have to save/restore
        those.

        * src/hal_mk_defs.c: Added definitions for armreg_r10 and
        armreg_svclr.

        * include/hal_arch.h: Added svc_lr field to HAL_SavedRegisters to
        save SVC mode link register during exception handling.

2002-04-30  Jesper Skov  <jskov@redhat.com>

        * cdl/hal_arm.cdl: Forcibly add -malignment-traps to the compiler
        options to work around problem with recent compiler. This can be
        removed when the tools are respun.

2002-04-29  Jonathan Larmour  <jlarmour@redhat.com>

        * src/vectors.S:
        Don't use .file as it can confuse debugging since the .file
        doesn't contain the path and therefore the debugger will never
        know where it lives! This conflicts with using -Wa,--gstabs.

2002-04-25  Gary Thomas  <gthomas@redhat.com>

        * src/vectors.S: Safer clearing of BSS.

2002-04-15  Jonathan Larmour  <jlarmour@redhat.com>

        * src/hal_syscall.c (hal_syscall_handler): Add extra sig argument to
        __do_syscall.

2002-04-15  Mark Salter  <msalter@redhat.com>

        * src/vectors.S: Rewrite exception handling to allow exceptions
        in any privileged mode.
        * src/hal_mk_defs.c (main): Add some regs.
        * include/hal_arch.h (HAL_SavedRegisters): Slight rearrangement.
        * src/context.S (hal_thread_switch_context): Use new context layout.
        (hal_thread_load_context): Ditto.

2002-04-11  Jesper Skov  <jskov@redhat.com>

        * src/arm.ld: Fixed .sbss rule.

2002-04-10  Jonathan Larmour  <jlarmour@redhat.com>

        * src/arm.ld: Define .gnu.linkonce sections properly.
        Remove sbss from data section.

2002-03-27  Gary Thomas  <gthomas@redhat.com>

        * src/vectors.S: Use interrupt stack during system initialzation
        if configured since this stack will be much larger than the default
        idle thread stack.  Some configurations (think networking) may use
        lots of stack space during system startup and the assumption that
        the idle thread stack does not need much space fails miserably.

2002-02-19  Mark Salter  <msalter@redhat.com>

        * src/arm_stub.c (target_thumb_ins): Check architecture version
        to decide how to handle pop insn.
        (v5T_semantics): New function. Returns true for v5 and later.

2002-02-08  Jesper Skov  <jskov@redhat.com>

        * src/arm_stub.c (target_thumb_ins): The result of a POP
        instruction changing the PC must be the address of a THUMB
        instruction.

2002-01-29  Jesper Skov  <jskov@redhat.com>

        * src/redboot_linux_exec.c: Include hal_io.h instead of CRUFT_H.
        (do_exec): Add nops after loop copying trampoline code. Removed
        one argument to the assembly: code only works if virt==phys
        mapping anyway. This should be rewritten to be safe for all
        possible targets.

2002-01-28  Jesper Skov  <jskov@redhat.com>

        * include/hal_io.h: Include var_io.h if present, otherwise include
        plf_io.h. This makes the ARM HAL match the other HALs better in
        this regard, allowing platform IO definitions to override variant
        IO definitions while allowing sharing code between platforms of
        the same variant.

2002-01-25  Jesper Skov  <jskov@redhat.com>

        * cdl/hal_arm.cdl: Added RedBoot options.
        * src/redboot_linux_exec.c: Added generic version of the RedBoot
        exec command to be shared by all ARM platforms. Still needs some
        cleaning up after CYGARC_ memory macros find their proper home.

2002-01-08  Hugo Tyson  <hmt@redhat.com>

        * cdl/hal_arm.cdl (CYGOPT_HAL_ARM_SYSCALL_GPROF_SUPPORT): New
        option, implements CYGINT_REDBOOT_BSP_SYSCALLS_GPROF_SUPPORT so
        RedBoot knows we can do this.  Only active if indeed we can.

        * include/hal_arch.h (HAL_GET_PROFILE_INFO): New macro, to extract
        the interrupted PC and SP from a struct HAL_SavedRegisters.  Used
        for histogram-style profiling.

2001-11-02  Hugo Tyson  <hmt@redhat.com>

        * include/arm_stub.h (CYG_HAL_GDB_LEAVE_CRITICAL_IO_REGION): Nasty
        bodge to fix a tools issue where an "unused" label is migrated to
        where some real code is, ie. the wrong place in this case.
        Problem applies to arm9e-elf tools and other arm variants also.

2001-10-29  Hugo Tyson  <hmt@redhat.com>

        * src/arm.ld (SECTION_rom_vectors): Define symbols used for ROMRAM
        startup; for some reason these were not in the trunk.  They are:
        __rom_vectors_vma and __rom_vectors_lma

2001-10-24  Gary Thomas  <gthomas@redhat.com>

        * src/hal_misc.c (hal_msbindex): Fix calculation.

2001-10-23  Hugo Tyson  <hmt@redhat.com>

        * include/hal_mmu.h (MMU_Control_Z,F,RR): Some extra defines for
        newer ARM architectures.

2001-10-11  Fabrice Gautier  <Fabrice_Gautier@sdesigns.com>

        * include/hal_io.h: Add _STRING variants of I/O macros to allow
        writing of consecutive items to the same registers.

2001-10-02  Jonathan Larmour  <jlarmour@redhat.com>

        * include/hal_arch.h: Remove CYG_HAL_TABLE_BEGIN and CYG_HAL_TABLE_END
        as the common versions are acceptable.

2001-10-01  Jonathan Larmour  <jlarmour@redhat.com>

        * src/arm.ld: Make separate section for GOT and .eh_frame.
        Make macro section for all reloc sections.
        Input extras.o unconditionally.
        * cdl/hal_arm.cdl: Don't bother with -DEXTRAS=1 - unconditional now.

2001-08-24  Mark Salter  <msalter@redhat.com>

        * src/arm_stub.c (target_thumb_ins): Add support for pop insn.

2001-08-21  Hugo Tyson  <hmt@redhat.com>

        * include/hal_intr.h: Only define HAL_CLOCK_LATENCY() if it's not
        defined already (if it's needed at all).  This is for platforms
        which need a separate routine, such as sa11x0.

2001-07-19  Gary Thomas  <gthomas@redhat.com>

        * src/vectors.S: Support ROMRAM startup mode.  Note: most of
        the support for this mode will be in the platform setup code.

2001-07-18  Gary Thomas  <gthomas@redhat.com>

        * src/hal_mk_defs.c (main): FIQ no longer listed as an exception.

2001-07-17  Jonathan Larmour  <jlarmour@redhat.com>

        * include/hal_intr.h: Define range of exceptions more accurately.

2001-07-16  Gary Thomas  <gthomas@redhat.com>

        * src/hal_misc.c (exception_handler): Allow memory faults to be
        caught, even when GDB stubs are not included.

2001-06-22  Gary Thomas  <gthomas@redhat.com>

        * include/arm_stub.h (NUMREGBYTES): Define - this tells GDB how 
        large it's communications buffers need to be.

2001-06-05  Gary Thomas  <gthomas@redhat.com>

        * src/vectors.S (spurious_IRQ): Better handling of spurious ints.
        Pass register frame to handler.

2001-05-23  Gary Thomas  <gthomas@redhat.com>

        * src/vectors.S: Allow platforms to define a 'preamble' which gets
        included _before_ the vectors.  This is often required for modules
        which are run from ROM/Flash.

2001-04-30  Gary Thomas  <gthomas@redhat.com>

        * src/vectors.S (__exception_handlers): Platforms must explicitly 
        define CYGSEM_HAL_ROM_RESET_USES_JUMP if required.

2001-04-27  Hugo Tyson  <hmt@redhat.com>

        * src/vectors.S: Platforms without CYGHWR_HAL_ARM_HAS_MMU defined
        require that the reset jump be straight up to ROM.  So you can't
        just use a local branch.  This is needed to make RedBoot in the
        EBSA285 work, for example.

2001-04-19  Gary Thomas  <gthomas@redhat.com>

        * cdl/hal_arm.cdl: Fix typo for ARM9 systems.

2001-04-18  Gary Thomas  <gthomas@redhat.com>

        * src/vectors.S: Add new flag 'CYG_HAL_ROM_RESET_USES_JUMP' to control
        how RESET is handled.  This is normally set for ROM applications, but
        can be overridden by platform code for situations when it is unsuitable
        to have a branch as the RESET instruction.

2001-04-16  Gary Thomas  <gthomas@redhat.com>

        * cdl/hal_arm.cdl: Add new interfaces to describe CPU family and
        option possiblities.

2001-04-07  Mark Salter  <msalter@redhat.com>

        * src/arm_stub.c: Add support for v5T BLX insn.

2001-03-30  Mark Salter  <msalter@redhat.com>

        * src/vectors.S (__exception_handlers): Don't use relative branch
        for reset on iq80310.

2001-03-28  Hugo Tyson  <hmt@redhat.com>

        * src/vectors.S (__GDB_stack_base): Increase stubs stack size to
        "enough".  We tend to have either RedBoot (with no interrupt
        stack) or an app (with no stubs stack) these days, so I used
        CYGNUM_HAL_COMMON_INTERRUPTS_STACK_SIZE.  It defaults to 4k in
        RedBoot which is enough compared to the previous hard-wired 1k.
        The overflow occurred in RedBoot, with i82559 ether driver, during
        GDB connection - but manifested as "network stack out of buffers"
        because of a recursion in trying to report a trap.

2001-02-24  Gary Thomas  <gthomas@redhat.com>

        * include/hal_mmu.h (MMU_Control_X): Add - used by Win/CE.

        * src/vectors.S (__exception_handlers): Change RESET vector
        to use jump for ROM based applications [safer].
        (warm_reset): Only do 'swi' contortions when starting RAM
        applications from Angel.

2001-02-22  Jesper Skov  <jskov@redhat.com>

        * src/arm.ld: Relocate .2ram sections to the .data section.

2001-02-20  Jesper Skov  <jskov@redhat.com>

        * cdl/hal_arm.cdl: Added CYGBLD_ARM_ENABLE_THUMB_INTERWORK.

2001-02-13  Gary Thomas  <gthomas@redhat.com>

        * src/vectors.S (handle_IRQ_or_FIQ): Change behaviour for
        handling spurious interrupts.

        * src/hal_misc.c (hal_spurious_IRQ): New function - called
        when a spurious interrupt is detected.  Defined as "weak"
        so platforms can provide localized support.

        * src/hal_mk_defs.c: 
        * include/hal_intr.h (CYGNUM_HAL_INTERRUPT_NONE): Define.

2001-02-09  Hugo Tyson  <hmt@redhat.com>

        * src/vectors.S (UNMAPPED()): Handle CYGHWR_HAL_ROM_VADDR if so
        defined; this is used when compiling for a different location from
        the base of ROM.  hal_platform_setup.h might define it.  For
        example, if flash is from 0x50000000 upwards (as on SA11x0), and
        we are to execute at 0x50040000, then we want the reset vector to
        point to 0x0004pqrs - the unmapped ROM address of the code -
        rather than 0x0000pqrs, which is the offset into our flash block.
        But usually it's not defined, so the behaviour is the obvious.

2001-02-08  Jesper Skov  <jskov@redhat.com>

        * include/arm_vv.h: Removed again, compiler does magic to thumb
        function pointers.
        * include/hal_arch.h: Same.

2001-02-07  Jesper Skov  <jskov@redhat.com>

        * include/arm_vv.h: Added virtual vector accessor macros that will
        properly mangle function pointers in thumb mode.
        * include/hal_arch.h: Include arm_vv.h
        * src/vectors.S: ctrlc_init can be called for thumb now (but
        requires ROM monitor to be built with -mthumb-interwork)

2001-02-02  Mark Salter  <msalter@redhat.com>

        * src/arm_stub.c (__arm_breakinst): New ARM breakpoint insn.
        (__thumb_breakinst): New thumb breakpoint insn.
        (__is_bsp_syscall): Check for actual SWI number and support
        thumb.

        * include/hal_arch.h (HAL_BREAKINST_ADDR): New macro to provide
        address of correct breakpoint insn of the given length.

2001-02-01  Jesper Skov  <jskov@redhat.com>

        * src/hal_misc.c: Don't use diag_printf directly (rely on tracing
        macros).

2001-01-31  Mark Salter  <msalter@redhat.com>

        * src/vectors.S (FIQ): Fix broken fiq handling.

2001-01-31  Jesper Skov  <jskov@redhat.com>

        * cdl/hal_arm.cdl:  Get rid of CYGDBG_HAL_DIAG_DISABLE_GDB_PROTOCOL
        options. They are replaced by the
        CYGSEM_HAL_DIAG_MANGLER option.

2001-01-24  Jonathan Larmour  <jlarmour@redhat.com>

        * src/vectors.S (init_flag): Add explicit alignment, just in case.
        From Ilko Iliev <iliev@caretec.at>

2001-01-11  Hugo Tyson  <hmt@redhat.com>

        * src/vectors.S (hal_dram_size): Create hal_dram_type in memory at
        0x44, right after hal_dram_size.

        * include/hal_intr.h: Add an extern for the word at 0x44, named
        hal_dram_type (as in hal_dram_size).  This can be used for
        platform HALs to know how to decode VIRT_TO_PHYS addresses and
        vice versa.

2000-12-13  Hugo Tyson  <hmt@redhat.com>

        * include/hal_intr.h: Handle variant-, and possible overriding
        platform-, specific interrupt files <cyg/hal/hal_platform_ints.h>.
        This is to simplify the multiple SA11x0 targets which have no
        variation there.        

2000-12-11  Gary Thomas  <gthomas@redhat.com>

        * src/vectors.S (warm_reset): 'hal_dram_size' is now only set in
        platform code - no need to mess with (pure pollution) it here.

2000-11-19  Gary Thomas  <gthomas@redhat.com>

        * include/hal_io.h: Use CYGBLD_HAL_PLATFORM_IO_H for those platforms
        which define it (relieves this file of messy includes).

2000-11-16  Jesper Skov  <jskov@redhat.com>

        * include/basetype.h: Define LABEL mangling macros.

        * include/arch.inc: Added.

2000-11-06  Mark Salter  <msalter@redhat.com>

        * src/hal_syscall.c: New file. Arm interface to redboot's
        handler for GNUPro based application library syscalls.

        * src/arm_stub.c (__is_bsp_syscall): New function. Return
        true if exception caused by bsp SWI.

        * include/arm_stub.h: Add declaration for __is_bp_syscall.

        * cdl/hal_arm.cdl: Add hal_syscall.c to compile list.

2000-11-04  Mark Salter  <msalter@redhat.com>

        * include/hal_io.h: Include cyg/hal/plf_io.h for IQ80310.

        * src/arm_stub.c (__computeSignal): New interface for
        HAL_STUB_IS_STOPPED_BY_HARDWARE

2000-10-27  Mark Salter  <msalter@redhat.com>

        * src/arm_stub.c: Removed uneccesary include.

        * src/vectors.S (start): Fix use of registers which may have
        been destroyed by an LED macro.

2000-10-26  Mark Salter  <msalter@redhat.com>

        * src/arm_stub.c (__computeSignal): Add hook for platforms to
        check for hw watchpoint/breakpoint events.
        (__install_breakpoints): Support HAL breakpoint list.
        (__clear_breakpoints): Ditto.

        * include/hal_arch.h (HAL_BREAKINST_TYPE): Define. Needed by
        hw watchpoint/breakpoint support in stub.

2000-10-20  Jesper Skov  <jskov@redhat.com>

        * src/hal_misc.c: Update __mem_fault_handler declaration.

2000-09-05  Andrew Lunn <andrew.lunn@ascom.ch>

        * include/basetype.h: Override the alignment macros for the ARM
        architecture. The ARM compiler only alows a maximum of 4 bytes
        of alignment where as the default is 8
        
2000-08-15  Hugo Tyson  <hmt@cygnus.co.uk>

        * src/arm.ld (SECTION_text): Change it back so that
        infra/... range checking can see them.  _stext and _etext as seen
        from C are the eventual destination, so this is a step in the
        right direction.  You must hack if building redboot, for now.

2000-08-14  Hugo Tyson  <hmt@cygnus.co.uk>

        * src/arm.ld (SECTION_text): Change to stext and etext unadorned
        with underlines so that RedBoot can see them.

2000-08-14  Gary Thomas  <gthomas@redhat.com>

        * include/hal_arch.h: 
        * src/arm.ld: Changes to support new [anonymous] tables.

2000-07-17  Jesper Skov  <jskov@redhat.com>

        * src/vectors.S (start): Hack to allow thumb tests to run in farm
        until vector table Thumb/ARM API is fixed.

2000-07-07  Jesper Skov  <jskov@redhat.com>

        * src/arm_stub.c: Changes to support CygMon changes.

        * src/hal_misc.c: Fix warnings.

2000-07-05  Jesper Skov  <jskov@redhat.com>

        * src/hal_misc.c: 
        * src/vectors.S:
        All platforms now has VECTOR_SUPPORT (or provide alternative
        implementations). Removed checks for the option.

2000-07-04  Jonathan Larmour  <jlarmour@redhat.co.uk>

        * cdl/hal_arm.cdl: Add CYGINT_HAL_ARM_MEM_REAL_REGION_TOP
        interface

        * include/hal_intr.h: If the platform implements the
        CYGINT_HAL_ARM_MEM_REAL_REGION_TOP interface, define a new
        HAL_MEM_REAL_REGION_TOP macro appropriately

2000-06-28  Jesper Skov  <jskov@redhat.com>

        * src/hal_mk_defs.c:
        * src/arm_stub.c: 
        Fix compiler warnings.

2000-06-21  Nick Garnett  <nickg@cygnus.co.uk>

        * include/hal_arch.h:
        Added local variants of CYG_HAL_TABLE_BEGIN() and
        CYG_HAL_TABLE_END() since the ARM assembler implements some of
        this code with a slightly different syntax to all the other
        targets.

        * include/basetype.h:
        Removed definition of CYG_LABEL_NAME(). Now dealt with by default
        definition in cyg_type.h.
        
        * src/hal_misc.c: 
        * src/arm_stub.c:
        Removed use of CYG_LABEL_NAME(), added underscore to _breakinst.

        * src/arm.ld:
        Added extra underscores to _stext and _etext.
        Switched over to new table creation mechanism.  

2000-06-19  Gary Thomas  <gthomas@redhat.com>

        * src/vectors.S: Changes for virtual vector support.
        (hal_virtual_vector_table): Need to protect if virtual vector
        stuff not defined.

        * src/hal_mk_defs.c: Add symbols for virtual vector table.

        * src/hal_misc.c (hal_arch_default_isr): New function.  Used in
        place of 'hal_default_isr' if virtual vector support is enabled.

        * include/hal_intr.h: "Fixed" items now exported in 'vectors.S'

        * src/vectors.S: Add notion of "fixed vectors" to all platforms.

2000-06-08  Jesper Skov  <jskov@redhat.com>

        * include/hal_arch.h (CYGARC_HAL_SAVE_GP, CYGARC_HAL_RESTORE_GP):
        Added.

2000-06-04  Gary Thomas  <gthomas@redhat.com>

        * src/vectors.S: Add support for platform specific "vectors"
        which may need to end up in predefined memory locations.
        * src/arm.ld: Add separate 'fixed_vectors' section.

2000-06-01  Gary Thomas  <gthomas@redhat.com>

        * include/hal_mmu.h (MMU_Control_I): Added for StrongARM support.

2000-04-10  Hugo Tyson  <hmt@cygnus.co.uk>

        * include/arm_stub.h (CYG_HAL_GDB_ENTER_CRITICAL_IO_REGION): Only
        use this complex version if we have
        CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT ie. the place_break &c routines
        existed anyway.  This is an artificial limitation, somewhat, but
        not so painful in reality.

2000-04-04  Jesper Skov  <jskov@redhat.com>

        * src/context.S: 
        * src/vectors.S: 
        Wrap the trivial thumb stuff in macros so the important bits stand
        out.
        Fix dumb bug.
        
2000-03-24  Jesper Skov  <jskov@redhat.com>

        * src/arm_stub.c: Make place_break thumb-aware.

        * include/arm_stub.h (CYG_HAL_GDB_ENTER_CRITICAL_IO_REGION): 
        Thumb-aware definition.
        
2000-03-01  Gary Thomas  <gthomas@cygnus.co.uk>

        * cdl/hal_arm.cdl: 
        Implement CYGINT_HAL_DIAG_DISABLE_GDB_PROTOCOL_SUPPORTED.
        
2000-02-29  Jonathan Larmour  <jlarmour@redhat.co.uk>

        * include/arm_stub.h: Make header C++ safe

2000-02-28  Gary Thomas  <gthomas@cygnus.co.uk>

        * src/hal_misc.c: Use standard 'diag_dump_buf()' instead of
        private version.

2000-02-16  Jesper Skov  <jskov@redhat.com>

        * src/arm_stub.c: CYG_HAL_ARM -> CYGPKG_HAL_ARM

2000-02-10  Jesper Skov  <jskov@redhat.com>

        * src/vectors.S (reset_platform):
        Removed handling of stubs startup type.

2000-02-09  Jesper Skov  <jskov@redhat.com>

        * cdl/hal_arm.cdl: Removed some fix mes.

2000-02-01  Jonathan Larmour  <jlarmour@redhat.co.uk>

        * cdl/hal_arm.cdl: Add missing CYGIMP_HAL_PROCESS_ALL_EXCEPTIONS
        and CYGHWR_HAL_ARM_ICE_THREAD_SUPPORT
        options from include/pkgconf/hal_arm.h

2000-02-01  Jesper Skov  <jskov@redhat.com>

        * src/vectors.S: Treat ROM startup+ROM monitor as STUBS startup.

        * src/arm.ld: Changed PID BE workaround to work with ROM startup.
        Not just when building stubs.
        
2000-01-28  Gary Thomas  <gthomas@cygnus.co.uk>

        * src/arm.ld: Add new section 'netdevtab' used to support
        network device initialization.

2000-01-26  Jonathan Larmour  <jlarmour@redhat.co.uk>

        * src/hal_misc.c (exception_handler): Replace CYGDAT_CYGMON_ENABLE
        dependency with just CYGPKG_CYGMON
        * src/arm_stub.c (__clear_breakpoints): Likewise

1999-12-16  Gary Thomas  <gthomas@cygnus.co.uk>

        * src/arm.ld: Include all SRAM (*.sram*) sections.

1999-12-09  John Dallaway  <jld@cygnus.co.uk>

        * cdl/hal_arm.cdl: Add big-endian option.

1999-12-08  Gary Thomas  <gthomas@cygnus.co.uk>

        * src/arm.ld: Add ".sram" section support (used by platforms
        that have separate SRAM and DRAM).

1999-12-07  Jesper Skov  <jskov@cygnus.co.uk>

        * cdl/hal_arm.cdl: Added ARM7/ARM9 family option.

1999-12-06  Gary Thomas  <gthomas@cygnus.co.uk>

        * src/vectors.S (software_interrupt): Context save was incorrect
        for this mode.  Note that when entering from supervisor mode, the
        link register (LR) is destroyed.

1999-12-02  John Dallaway  <jld@cygnus.co.uk>

        * cdl/hal_arm.cdl:

        Use the <PACKAGE> token in custom rules.

1999-12-01  John Dallaway  <jld@cygnus.co.uk>

        * cdl/hal_arm.cdl:

        Use the <PREFIX> token in custom rules.

1999-11-22  Gary Thomas  <gthomas@cygnus.co.uk>

        * src/arm.ld: Add section for definining static MMU tables.

        * src/vectors.S: Introduce PLATFORM_EXTRAS, which if defined provides
        a hook to include platform code in the "vectors.S" file.  In particular,
        some platforms will define this to be <cyg/hal/hal_platform_extras.h> 
        and define static MMU tables there.

1999-11-19  Jonathan Larmour  <jlarmour@cygnus.co.uk>

        * include/basetype.h (CYG_BYTEORDER): If the toolchain tells us to be
        big-endian, be big-endian
        Reported by Grant Edwards

1999-11-12  Gary Thomas  <gthomas@cygnus.co.uk>

        * src/vectors.S (reset_platform): New function used to reset board
        in the absense of real hardware reset (not possible on all boards).

1999-11-11  John Dallaway  <jld@cygnus.co.uk>

        * cdl/hal_arm.cdl:

        Generate 'arm.inc' in the build tree.

1999-11-05  John Dallaway  <jld@cygnus.co.uk>

        * cdl/hal_arm.cdl:

        Add complete dependency analysis to the custom
        rule for 'arm.inc'.

1999-11-04  John Dallaway  <jld@cygnus.co.uk>

        * cdl/hal_arm.cdl:

        Tidy up custom rules.

1999-11-04  John Dallaway  <jld@cygnus.co.uk>

        * cdl/hal_arm.cdl:

        Output custom rule dependency information to .deps files in
        the current directory.

        Dispense with the need to create a 'src' sub-directory.

1999-11-01  Jonathan Larmour  <jlarmour@cygnus.co.uk>

        * src/hal_misc.c (exception_handler): Check for CYGDAT_CYGMON_ENABLE
        rather than just CYGPKG_CYGMON
        Include <pkgconf/cygmon.h> to get this define

1999-10-29 Simon FitzMaurice <sdf@cygnus.co.uk>

        * cdl/hal_arm.cdl:

        Use fgrep instead of grep in custom rules.  The latter seems
        to behave weirdly under win32.

1999-10-27  Gary Thomas  <gthomas@cygnus.co.uk>

        * src/arm_stub.c: Fix typo (CYGDAT_CYGMON_ENABLE).  Also need
        to include <pkgconf/cygmon.h>

1999-10-27  Gary Thomas  <gthomas@cygnus.co.uk>

        * src/arm_stub.c: Add explicit enable for CygMon package.

1999-10-27  Hugo Tyson  <hmt@cygnus.co.uk>

        * src/arm_stub.c (cyg_hal_gdb_interrupt): Bugfix to previous: ^Cs
        were being ignored when received by the diag output code, because
        there was already a break in place.  Solution is to let
        cyg_hal_gdb_interrupt() override any previous break, and tidy up
        state of course.

1999-10-26  Hugo Tyson  <hmt@cygnus.co.uk>

        * src/arm_stub.c (cyg_hal_gdb_place_break): Add this to the
        ARM-specific GDB stub code.  See hal/common/.../hal_stub for
        details.

1999-10-26  John Dallaway  <jld@cygnus.co.uk>

        * cdl/hal_arm.cdl:

        Invoke 'sh' version of 'mkdir' explicitly in custom rules.

1999-10-26  Jesper Skov  <jskov@cygnus.co.uk>

        * src/vectors.S: Cleaned up LED code a bit.

1999-10-25  Gary Thomas  <gthomas@cygnus.co.uk>

        * src/hal_misc.c (exception_handler): If building for CygMon, defer
        exception processing to it, not here.

        * src/arm_stub.c (__install_breakpoints, __clear_breakpoints): 
        Leave out these [dummy] functions if building CygMon.

        * include/pkgconf/hal_arm.h: Add new configuration option to let
        programs which do not include GDB stubs still process "illegal
        instruction" exceptions.

        * src/vectors.S: Reorder context restore so stack changes are
        protected (interrupts off).

1999-10-26  Jesper Skov  <jskov@cygnus.co.uk>

        * src/arm.ld: Added support for merging RODATA sections into DATA
        * include/hal_io.h: Added BE support.
        
        * src/vectors.S (LED): Added definition for PID board.

1999-10-26  John Dallaway  <jld@cygnus.co.uk>

        * cdl/hal_arm.cdl:

        Modify custom make rules to specify file paths relative
        to the package version directory.

1999-10-22  Hugo Tyson  <hmt@cygnus.co.uk>

        * src/arm_stub.c (cyg_hal_gdb_running_step):
        (cyg_hal_gdb_break_is_set): Provide dummies for these two for now.
        See changelog for hal/common/ hal_stub and generic_stub for info.

1999-10-21  Jonathan Larmour  <jlarmour@cygnus.co.uk>

        * include/hal_arch.h: Tidy a bit so the breakpoint instruction is only
        defined in one place
        Change thumb breakpoint instruction to 0xbebe

1999-10-18  John Dallaway  <jld@cygnus.co.uk>

        * cdl/hal_arm.cdl:

        Add cdl_option CYGHWR_THUMB.

1999-10-14  Jesper Skov  <jskov@cygnus.co.uk>
        From James Ingham <jingham@cygnus.com>:
        * src/PKGconf.mak: Make sed invocation Solaris safe.

1999-10-11  Jesper Skov  <jskov@cygnus.co.uk>

        * src/vectors.S (reset_vector): Always execute PLATFORM_SETUP1.

1999-10-10  Gary Thomas  <gthomas@cygnus.co.uk>

        * include/pkgconf/hal_arm.h: 
        * src/vectors.S: 
        * src/arm_stub.c: Add thread debug support via Multi-ICE.

1999-10-08  Jonathan Larmour  <jlarmour@cygnus.co.uk>

        * src/arm.ld (SECTION_bss): Make *(.bss*) rather than just .bss, to
        cater for nickc's BSS gc improvements.

1999-10-06  Jesper Skov  <jskov@cygnus.co.uk>

        * include/basetype.h: Set endian to BE if required.

1999-10-05  Jesper Skov  <jskov@cygnus.co.uk>

        * src/arm.ld: Force output format to BE if required.

1999-09-30  Jesper Skov  <jskov@cygnus.co.uk>

        * src/vectors.S: Add thumb_func before thumb code where switching
        so GDB/objdump knows how to disassemble it.
        * include/hal_arch.h: Change thumb breakpoint to undefined
        instruction.
        * src/arm_stub.c (target_thumb_ins): Corrected branch offsets.

1999-09-23  Gary Thomas  <gthomas@cygnus.co.uk>

        * src/vectors.S (call_exception_handler): Change on 09-19 messed up
        status register wrt breakpoints, single stepping, etc.

1999-09-21  Gary Thomas  <gthomas@cygnus.co.uk>

        * include/hal_arch.h: Remove FIXME about GDB register layout.

        * src/context.S (hal_thread_save_context): Change function prologue
        to match APCS more closely (keeps GDB happier).

1999-09-19  Gary Thomas  <gthomas@cygnus.co.uk>

        * src/vectors.S (spurious_IRQ): Make sure interrupts are masked
        when switching to IRQ mode.

        * src/hal_misc.c (exception_handler): GDB stubs only take over
        memory exceptions.  This allows proper handling when an application
        has it's own IRQ/FIQ VSR.

1999-09-16  Jesper Skov  <jskov@cygnus.co.uk>

        * src/arm.ld: Handle thumb glue sections.

1999-09-16  Jesper Skov  <jskov@cygnus.co.uk>

        * src/vectors.S: Always include thumb exception support.

1999-09-15  Jesper Skov  <jskov@cygnus.co.uk>

        * src/context.S: Don't trash r0 which holds the thread's initial
        argument.

        * include/hal_arch.h: 
        * src/arm_stub.c: 
        Added thumb-aware GDB interrupt functions.
        
1999-09-14  Jesper Skov  <jskov@cygnus.co.uk>

        * src/vectors.S (undefined_instruction): Adjusted wrong register.
        * src/arm_stub.c (target_thumb_ins): Set thumb flag when required.
        (target_ins): Added BX handling.

        * src/vectors.S:
        * include/hal_arch.h: 
        * src/hal_mk_defs.c:
        * src/arm_stub.c (__single_step): 
        Determine thumb mode by looking at T bit.

1999-09-10  Jesper Skov  <jskov@cygnus.co.uk>

        * src/arm_stub.c (target_thumb_ins): BL is a double instruction.

1999-09-13  Gary Thomas  <gthomas@cygnus.co.uk>

        * src/vectors.S (handle_IRQ_or_FIQ): Allow spurious interrupts
        to be ignored.  Some platforms (CL7xxx) have non-debounced 
        interrupt sources which can vanish before the hardware can be
        queried.

1999-09-11  Jonathan Larmour  <jlarmour@cygnus.co.uk>

        * src/arm_stub.c (__computeSignal): Synchronise return value with
        what libbsp does and GDB expects
        (__get_trap_number): Don't shift right 8 - it's already the right number

1999-09-10  Jesper Skov  <jskov@cygnus.co.uk>

        * src/vectors.S (start): Moved stub vector changeover to after
        stub init.

1999-09-09  Jesper Skov  <jskov@cygnus.co.uk>

        * include/hal_arch.h (HAL_BREAKPOINT):
        * src/arm_stub.c:
        * src/vectors.S:
        Added thumb stub support (except C-c support).
        
1999-08-24  Gary Thomas  <gthomas@cygnus.co.uk>

        * src/vectors.S: Fix misc THUMB procedures.

1999-08-24  Hugo Tyson  <hmt@masala.cygnus.co.uk>

        * src/vectors.S (handle_IRQ_or_FIQ): Set up the pointer-to-regset
        in r2 for calling the ISR as well as the DSR.  This is needed for
        the cyg_hal_gdb_isr() for those platforms that handle ^C's
        incoming that way - the ISR needs a regset to know where to plant
        a breakpoint to stop the system in the interrupted context.

1999-08-24  Jesper Skov  <jskov@cygnus.co.uk>

        * src/vectors.S (LED): Check XBUS setting jumper and behave
        accordingly.

1999-08-23  Jesper Skov  <jskov@cygnus.co.uk>

        * src/arm_stub.c 
        (target_ins): Check whether branches execute.
        (ins_will_execute): Fixed HI and LS.

1999-08-13  John Dallaway  <jld@cygnus.co.uk>

        * cdl/hal_arm.cdl: Add path to CYGBLD_LINKER_SCRIPT value.

1999-08-12  John Dallaway  <jld@cygnus.co.uk>

        * cdl/hal_arm.cdl: Define CYGBLD_LINKER_SCRIPT.

1999-08-12  Jesper Skov  <jskov@cygnus.co.uk>

        * include/hal_io.h: Include plf_io.h when appropriate.

1999-08-06  Jesper Skov  <jskov@cygnus.co.uk>
        CR 101032
        * src/vectors.S (handle_IRQ_or_FIQ): Moved setup of register_frame
        argument to just before the interrupt_end call.

1999-07-28  Hugo Tyson  <hmt@cygnus.co.uk>

        * src/vectors.S (_eCos_id): Remove bogus version string.

1999-07-26  Hugo Tyson  <hmt@cygnus.co.uk>

        * src/hal_misc.c (hal_default_isr): Call the special platform HAL
        routine to see whether there is a ^C lurking in the serial device
        through a macro, if it's defined.  Problem is that
        CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT *is* defined for platforms that
        do not support it.

1999-07-23  Hugo Tyson  <hmt@cygnus.co.uk>

        * src/hal_misc.c (hal_default_isr): If we are including
        CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT, then poll a special platform
        HAL routine to see whether there is a ^C lurking in the serial
        device.  This has to be done from the default ISR so that others
        (which must know about ^Cs is they are still to be handled) can
        install over the top.  Not all platforms support this, so enabling
        CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT will not necessarily work.

1999-07-21  Hugo Tyson  <hmt@cygnus.co.uk>

        * src/vectors.S (vectors): Re-organize startup a little to support
        ROMming of the image and stubrom creation.  Withdraw publication
        of cyg_startup_stack; it's necessary to do this a different way,
        using...

        * include/hal_intr.h (hal_dram_size): reserve location 0x40 for
        communicating DRAM size between boot ROMs and app during startup,
        and remembering it within ROM startup.  Platforms that don't need
        this should zero the location.

1999-07-19  Hugo Tyson  <hmt@cygnus.co.uk>

        * src/vectors.S (cyg_startup_stack): Publish this object for
        passing some DRAM size info around during startup.
        Remove the unused [well, ignored] array hal_vsr_table - the VSR
        table is defined to be at 0x20 by the code here in vectors.S

        * include/hal_intr.h (HAL_VSR_SET): define hal_vsr_table to be at
        0x20 where the hardware vectors actually read VSR entries from.
        Renumber VSR symbols to match.  Do not use the external
        "hal_vsr_table" symbol.

1999-07-15  Hugo Tyson  <hmt@cygnus.co.uk>

        * src/vectors.S (reset_vector): Invalidate and disable caches for
        EBSA-285 startup is now in PLATFORM_SETUP1 as intended.  Cache
        enabling is in hal_hardware_init; so, same results as before, but
        tidier.

1999-07-14  Hugo Tyson  <hmt@cygnus.co.uk>

        * src/vectors.S: Add some startup debug via a LED macro - which
        has different content depending on platform, of course.
        For the EBSA-285, flush caches when writing vectors and the like,
        since RAM startup occurs with caches enabled, otherwise you get
        mysterious traps as CygMon is entered regardless at the first
        clock tick, for example.  This may be taken out again as ROM
        startup is dealt with via PLATFORM_SETUP1, but for now...

1999-06-22  Gary Thomas  <gthomas@cygnus.co.uk>

        * src/vectors.S: Fix names of 'report' functions (debug dumps
        for various exceptions).  These needed changes for two reasons:
        name pollution and naming clashes after new ABI adopted.
        Improve support for FIQ interrupts.

1999-06-16  Gary Thomas  <gthomas@cygnus.co.uk>

        * src/vectors.S: Add ".pool" directives which cause assembler 
        to dump it's literal pool early.  This is necessary because
        of the limited addressing available in THUMB mode.

1999-06-15  Gary Thomas  <gthomas@cygnus.co.uk>

        * src/vectors.S (vectors): Some boards have an MMU, but the
        reset vector needs to have an unmapped address!

1999-06-09  Gary Thomas  <gthomas@cygnus.co.uk>

        * src/vectors.S (reset_vector): Streamline ROM/STUBS code.

1999-05-25  Gary Thomas  <gthomas@cygnus.co.uk>

        * src/vectors.S (_eCos_id): Add version string.  Useful for
        tracking when a system was configured (especially ROMs).
        Add initial pure-thumb support - only for kernel+application
        in thumb mode.
        
        * include/hal_intr.h: Update interrupt support macros for
        thumb mode system.

        * src/context.S: Add initial pure-thumb mode support.

1999-05-21  Hugo Tyson  <hmt@cygnus.co.uk>

        * include/hal_intr.h: Define HAL_INTERRUPT_STACK_BASE and
        HAL_INTERRUPT_STACK_TOP so that stack usage macros in
        kernel/.../stackmon.hxx can work.

        * src/vectors.S (cyg_interrupt_stack_base): Define this symbol for
        the interrupt stack and its friend for the stack top so that we
        can publish them with nice names.

1999-05-19  Gary Thomas  <gthomas@cygnus.co.uk>

        * src/arm.ld: Change symbols to match new no-underscore ABI.

1999-05-19  Gary Thomas  <gthomas@cygnus.co.uk>

        * include/hal_intr.h: Define interrupt support functions for 
        Thumb mode.

1999-05-16  Gary Thomas  <gthomas@cygnus.co.uk>

        * include/hal_intr.h (HAL_INTERRUPT_STACK_CALL_PENDING_DSRS): 
        Add macro for new DSR handling mechanism (was override of a
        "weak" symbol in kernel).       

1999-05-13  Hugo Tyson  <hmt@cygnus.co.uk>

        * include/hal_arch.h (HAL_THREAD_INIT_CONTEXT): Align stack
        (rather conservatively) before use.

1999-05-11  Gary Thomas  <gthomas@cygnus.co.uk>

        * src/vectors.S: No separate interrupt stack if no kernel.

1999-05-10  Gary Thomas  <gthomas@cygnus.co.uk>

        * src/vectors.S: 
        * src/hal_mk_defs.c: 
        * include/hal_arch.h: Fix up machine states, initialize stacks.

1999-04-28  Bart Veer  <bartv@cygnus.co.uk>

        * src/PKGconf.mak:
        Remove the -n argument to tail, it does not appear to be required
        on any supported host and causes problems with some
        implementations of tail.

1999-04-25  Gary Thomas  <gthomas@cygnus.co.uk>

        * src/vectors.S: Fix use of 'RAISE_INTR' which cannot be used in 'mov'
        instruction (doesn't fit). PR 19906

1999-04-23  John Dallaway  <jld@cygnus.co.uk>

        * src/PKGconf.mak: Avoid backslash in grep search pattern to
        workaround PR 19923.

1999-04-15  Jonathan Larmour  <jlarmour@cygnus.co.uk>

        * src/arm.ld: Define __bss_end at the end of the BSS
        * src/vectors.S (start): Use __bss_end rather than _end when clearing
        BSS
        These fix PR 19750

1999-04-14  Jonathan Larmour  <jlarmour@cygnus.co.uk>

        * src/PKGconf.mak (EXTRAS): Don't generate extras.o here any more
        But do define EXTRAS every time for the linker script
        
1999-04-13  Gary Thomas  <gthomas@cygnus.co.uk>

        * src/vectors.S: Use new include <cyg/hal/hal_platform_setup.h>
        which includes macros and definitions for platform specifics.
        This keeps 'ifdef's out of "vectors.S" and makes cleaner code.
        Major restructuring of interrupt handling to support full use
        of a separate interrupt stack.

1999-04-09  Jesper Skov  <jskov@cygnus.co.uk>

        * src/arm_stub.c: 
        Moved get_register and put_register to hal_stub.c.

1999-04-08  John Dallaway  <jld@cygnus.co.uk>

        * src/*.ld: Revised SECTION_* macro arguments to
        avoid padded output sections (PR 19787)

1999-03-22  Jonathan Larmour  <jlarmour@cygnus.co.uk>

        * include/arm_stub.h: Update copyright

        * src/arm_stub.c: Update copyright

1999-03-22  Hugo Tyson  <hmt@cygnus.co.uk>

        * include/hal_arch.h: 
        Use CYGNUM_HAL_STACK_SIZE_TYPICAL for the stack size instead of
        CYGNUM_HAL_MINIMUM_STACK_SIZE.

1999-03-16  Gary Thomas  <gthomas@cygnus.co.uk>

        * src/hal_misc.c: Change how breakpoint is described (just a long).

        * src/vectors.S: Pass registers to ISR for GDB break support.

1999-03-17  John Dallaway  <jld@cygnus.co.uk>

        * src/PKGconf.mak: Remove dependence on echo '-e' switch.

1999-03-12  Gary Thomas  <gthomas@cygnus.co.uk>

        * include/hal_arch.h: Add definition of 'CYGNUM_HAL_MINIMUM_STACK_SIZE'

1999-03-11  Gary Thomas  <gthomas@cygnus.co.uk>

        * include/pkgconf/hal_arm.h: Fix comment (name was incorrect)

1999-03-10  Jesper Skov  <jskov@cygnus.co.uk>

        * include/hal_intr.h (HAL_INTERRUPT_ATTACH): Added.

1999-03-09  Gary Thomas  <gthomas@cygnus.co.uk>

        * src/hal_misc.c: Move declaration of __CTOR_LIST__ to avoid warning.

1999-03-09  Gary Thomas  <gthomas@cygnus.co.uk>

        * src/vectors.S: Remove warning on stack size redefine.

1999-03-08  Gary Thomas  <gthomas@cygnus.co.uk>

        * src/vectors.S: Override default stack size on AEB.

1999-03-05  Gary Thomas  <gthomas@cygnus.co.uk>

        * src/vectors.S: 
        * include/pkgconf/hal_arm.h: DOn't print exception info if GDB stubs enabled.

        * src/PKGconf.mak: 
        * src/arm.ld: Clean up I/O package changes.     

1999-03-04  Jonathan Larmour  <jlarmour@cygnus.co.uk>

        * src/arm.ld: 
        Unconditionalize use of libextras.a and add libextras.a to GROUP()

1999-03-04  Gary Thomas  <gthomas@cygnus.co.uk>

        These changes merged from 'ecos-new_devs-19990216-branch'

        (1999-02-18  Gary Thomas  <gthomas@cygnus.co.uk>)

        * src/PKGconf.mak (DRIVERS): 
        * src/arm.ld: Support special linking requirements for I/O drivers.

        (1999-02-16  Gary Thomas  <gthomas@cygnus.co.uk>)

        * src/arm.ld: Changes for new I/O [device drivers] subsystem.

1999-02-26  Gary Thomas  <gthomas@cygnus.co.uk>

        * src/vectors.S: Add separate interrupt stack handling.

        Fix memory region layouts for AEB allowing better error detection.

1999-02-25  Nick Garnett  <nickg@cygnus.co.uk>

        * src/vectors.S:
        Changed label used to access scheduler lock to one that is not
        mangled by C++. This is intended to make support for interrupt
        handling in non-kernel configurations easier.

1999-02-20  Jonathan Larmour  <jlarmour@cygnus.co.uk>

        * include/hal_arch.h: 
        Rename deliver_exception -> cyg_hal_deliver_exception
        QA improvements

        * include/hal_intr.h:
        Reorganise vector/interrupt/exception names according to purpose
        QA improvements

        * arch/current/src/hal_misc.c:
        Rename deliver_exception -> cyg_hal_deliver_exception
        Rename vectors due to hal_intr.h changes
        QA improvements

        * arch/current/src/hal_mk_defs.c:
        * arch/current/src/vectors.S
        Rename vectors due to hal_intr.h changes
        QA improvements 

1999-02-16  Jesper Skov  <jskov@cygnus.co.uk>

        * src/vectors.S: Changed set_debug_traps to initialize_stub.

        * src/arm_stub.c:
        * include/arm_stub.h: 
        Cleaned up to only include arch specific stub code.

1999-02-16  Gary Thomas  <gthomas@cygnus.co.uk>

        * src/arm.ld: Changes for new I/O [device drivers] subsystem.

1999-02-10  Gary Thomas  <gthomas@cygnus.co.uk>

        * src/hal_misc.c (hal_default_isr): Add diagnostic message for PR 19145-19147

1999-02-05  John Dallaway  <jld@cygnus.co.uk>

        * src/arm.ld: Add LMA_EQ_VMA macro definition.

1999-02-04  Gary Thomas  <gthomas@cygnus.co.uk>

        * src/vectors.S: Use symbolic 'raise interrupt' instead of hard coded value.
        Better GDB stubs stack handling.
        
        * src/hal_mk_defs.c: Add symbolic symbol for 'raise interrupt' instrumentation.

1999-02-03  Gary Thomas  <gthomas@cygnus.co.uk>

        * src/hal_misc.c (cyg_hal_invoke_constructors): 
        * src/vectors.S (start): Use C coded 'cyg_hal_invoke_constructors()'

        * src/hal_misc.c (exception_handler): Remove debug message ...oops!

        * include/hal_arch.h (HAL_SET_GDB_REGISTERS): Restore PSR.

        * src/vectors.S: Use separate stack for GDB stubs exception handlers.

1999-02-01  Gary Thomas  <gthomas@cygnus.co.uk>

        * src/hal_misc.c: Need <pkgconf/hal_arm.h> for 'dump exception' option.

        * src/vectors.S: Fix ROM startup machine initialization.

1999-01-25  Gary Thomas  <gthomas@cygnus.co.uk>

        * src/arm.ld: Add Copyright

1999-01-25  Jesper Skov  <jskov@cygnus.co.uk>

        * src/arm_stub.c (__build_t_packet): Rewrote fix me text. Added PR
        number, but otherwise left the note.

1999-01-21  Gary Thomas  <gthomas@cygnus.co.uk>

        * src/arm_stub.c (ins_will_execute): Computation of LS/HI
        was incorrect.

1999-01-20  Gary Thomas  <gthomas@cygnus.co.uk>

        * src/arm.ld: Change "etext" to "__etext".

1999-01-19  Gary Thomas  <gthomas@cygnus.co.uk>

        * src/vectors.S: Rework exception handlers.
        (start): Fix for new startup type (STUBS)

        * src/hal_misc.c (exception_handler): Allow GDB stubs to take over all
        exceptions while the stubs are executing.  Also move some common stubs
        initialization into this file.

1999-01-18  Gary Thomas  <gthomas@cygnus.co.uk>

        * include/pkgconf/hal_arm.h: Add configurations for GDB stubs/normal ROM.

        * src/arm.ld: Include HAL/ARM specifics.

        * include/pkgconf/hal_arm.h: 
        * src/hal_misc.c: 
        * src/vectors.S: Add configure option 'CYGHWR_HAL_ARM_DUMP_EXCEPTIONS'
        which is used to chose whether to print diagnostic exception dumps
        or not.

1999-01-15  Gary Thomas  <gthomas@cygnus.co.uk>

        * src/hal_misc.c: Clean up warnings

        * include/hal_arch.h: 
        * include/hal_intr.h: Add function prototypes to avoid warnings.

        * src/arm.ld: Add definition of _stext.  Take out
        GLOBAL_OFFSET_TABLE.

1999-01-14  Gary Thomas  <gthomas@cygnus.co.uk>

        * src/PKGconf.mak: Set up for MLT based linker scripts.

        * src/arm.ld: New file

        * include/hal_intr.h (HAL_QUERY_INTERRUPTS): Test was backwards

1999-01-13  Gary Thomas  <gthomas@cygnus.co.uk>

        * include/hal_intr.h (HAL_TRANSLATE_VECTOR): Add new macro

1999-01-12  Gary Thomas  <gthomas@cygnus.co.uk>

        * include/basetype.h (CYG_DOUBLE_BYTEORDER): Define ordering
        of words within doubles.

1999-01-05  Gary Thomas  <gthomas@cygnus.co.uk>

        * src/vectors.S: Force AEB-1 memory configuration.
        
1998-12-16  Gary Thomas  <gthomas@cygnus.co.uk>

        * src/arm_stub.c (ins_will_execute): Fix warning.

        * include/hal_intr.h: Add <hal/hal_platform_ints.h>
        for platform specifics.

1998-12-15  Gary Thomas  <gthomas@cygnus.co.uk>

        * src/hal_mk_defs.c: 
        * include/hal_io.h: 
        * src/vectors.S: Changes to support kernel-less configuration.
        (___gccmain): Add new dummy function.

        * src/hal_misc.c: Merge in platform independent code from
        old "pid/.../hal_misc.c"

1998-12-15  Jesper Skov  <jskov@cygnus.co.uk>

        * include/hal_arch.h: Changed HAL_JMP_BUF_SIZE to
        CYGARC_JMP_BUF_SIZE.

1998-12-14  Gary Thomas  <gthomas@cygnus.co.uk>

        * src/hal_misc.c (exception_handler): Change config option
        to be consistent "CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS"

        * include/hal_arch.h (HAL_THREAD_INIT_CONTEXT): Set initial
        PC for GDB thread info.

        * src/arm_stub.c (__build_t_packet): Fix thread id's which
        must be send to GDB in big-endian.

1998-12-10  Jesper Skov  <jskov@cygnus.co.uk>

        * include/hal_cache.h (HAL_DCACHE_UNLOCK_ALL,
        HAL_ICACHE_UNLOCK_ALL): Added.

1998-12-09  Gary Thomas  <gthomas@cygnus.co.uk>

        * src/vectors.S (abort_prefetch): Clean up all exception
        handlers (some were just broken).

        * src/hal_misc.c (exception_handler): Improved exception
        handling for GDB stubs while accessing memory.

1998-12-04  Gary Thomas  <gthomas@cygnus.co.uk>

        * src/arm_stub.c (target_ins): Finish single step support.

1998-12-03  Gary Thomas  <gthomas@cygnus.co.uk>

        * src/vectors.S (_name): Add undefined instruction handling
        (for breakpoint/single step support).  Plus some rework and
        general cleanup.

        * src/arm_stub.c (single_step): 
        * include/hal_arch.h (HAL_BREAKPOINT): Make breakpoint use
        an illegal instruction rather than SWI.

1998-12-02  Gary Thomas  <gthomas@cygnus.co.uk>

        * src/arm_stub.c (ins_will_execute): Take out debug messages

        * include/pkgconf/hal_arm.h: New file

        * include/arm_stub.h: Add PSR register definitions

        * src/arm_stub.c (single_step): Support single stepping

1998-12-01  Gary Thomas  <gthomas@cygnus.co.uk>

        * src/vectors.S (reset_vector): Rework exception handing to leave
        vectors in place unless GDB stubs are included (or started in
        user mode via Angel)

1998-11-26  Gary Thomas  <gthomas@cygnus.co.uk>

        * src/vectors.S (_vectors): Rework to handle SWI exception
        Changes to make GDB stubs work.

        * src/hal_misc.c (exception_handler): 
        Save registers in global "_hal_registers"

        * src/PKGconf.mak (COMPILE): Add arm_stub.c

        * include/hal_io.h: Need to include <pkgconf/kernel.h>

        * include/hal_arch.h (HAL_THREAD_INIT_CONTEXT): 
        Clean up stack usage - no need for 56 byte padding (PPC holdover)
        (HAL_BREAKPOINT): 
        (HAL_GET_GDB_REGISTERS): 
        (HAL_SET_GDB_REGISTERS): Clean up for working stubs

        * src/arm_stub.c: New file, GDB stubs support

1998-11-18  Gary Thomas  <gthomas@cygnus.co.uk>

        * src/hal_mk_defs.c: Add define for 'HAL_SavedRegisters'

        * include/hal_arch.h: cleanup comments

        * include/basetype.h: cleanup comments

        * src/vectors.S: Improved interrupt stack handling.

        * include/hal_intr.h: Add support for interrupt latency
        measurement, controlled by CYGVAR_KERNEL_COUNTERS_CLOCK_LATENCY.

1998-10-16  Bart Veer  <bartv@cygnus.co.uk>

        * src/vectors.S (__interrupt_stack):
        Made the interrupt stack size configurable.

//===========================================================================
// ####GPLCOPYRIGHTBEGIN####                                                
// -------------------------------------------                              
// This file is part of eCos, the Embedded Configurable Operating System.   
// Copyright (C) 1998, 1999, 2000, 2001, 2002, 2009 Free Software Foundation, Inc.
//
// This program is free software; you can redistribute it and/or modify     
// it under the terms of the GNU General Public License as published by     
// the Free Software Foundation; either version 2 or (at your option) any   
// later version.                                                           
//
// This program is distributed in the hope that it will be useful, but      
// WITHOUT ANY WARRANTY; without even the implied warranty of               
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU        
// General Public License for more details.                                 
//
// You should have received a copy of the GNU General Public License        
// along with this program; if not, write to the                            
// Free Software Foundation, Inc., 51 Franklin Street,                      
// Fifth Floor, Boston, MA  02110-1301, USA.                                
// -------------------------------------------                              
// ####GPLCOPYRIGHTEND####                                                  
//===========================================================================

Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.