Subversion Repositories openrisc

#ifndef CYGONCE_HAL_PLF_IO_H
#define CYGONCE_HAL_PLF_IO_H
//=============================================================================
//
//      plf_io.h
//
//      AT91SAM7S board specific registers
//
//=============================================================================
// ####ECOSGPLCOPYRIGHTBEGIN####                                            
// -------------------------------------------                              
// This file is part of eCos, the Embedded Configurable Operating System.   
// Copyright (C) 1998, 1999, 2000, 2001, 2002 Free Software Foundation, Inc.
//
// eCos is free software; you can redistribute it and/or modify it under    
// the terms of the GNU General Public License as published by the Free     
// Software Foundation; either version 2 or (at your option) any later      
// version.                                                                 
//
// eCos is distributed in the hope that it will be useful, but WITHOUT      
// ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or    
// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License    
// for more details.                                                        
//
// You should have received a copy of the GNU General Public License        
// along with eCos; if not, write to the Free Software Foundation, Inc.,    
// 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.            
//
// As a special exception, if other files instantiate templates or use      
// macros or inline functions from this file, or you compile this file      
// and link it with other works to produce a work based on this file,       
// this file does not by itself cause the resulting work to be covered by   
// the GNU General Public License. However the source code for this file    
// must still be made available in accordance with section (3) of the GNU   
// General Public License v2.                                               
//
// This exception does not invalidate any other reasons why a work based    
// on this file might be covered by the GNU General Public License.         
// -------------------------------------------                              
// ####ECOSGPLCOPYRIGHTEND####                                              
//=============================================================================
//#####DESCRIPTIONBEGIN####
//
// Author(s):   tkoeller
// Contributors: andrew lunn, Oliver Munz
// Date:        2009-06-03
// Purpose:     Atmel AT91SAM7S board specific registers
// Description:
// Usage:       #include <cyg/hal/plf_io.h>
//
//####DESCRIPTIONEND####
//
//=============================================================================
#include <pkgconf/hal_arm_at91sam7.h>
 
#define CYGARC_PHYSICAL_ADDRESS(_x_)
 
//SPI - Serial Peripheral Interface
#define AT91_SPI0   0xFFFE0000
 
#ifdef CYGHWR_HAL_ARM_AT91SAM7X
#define AT91_SPI1   0xFFFE4000
#endif
 
#define AT91_SPI AT91_SPI0
 
// DMA registers
#define AT91_SPI_RPR  0x100 // Receive Pointer Register
#define AT91_SPI_RCR  0x104 // Receive Counter Register
#define AT91_SPI_TPR  0x108 // Transmit Pointer Register
#define AT91_SPI_TCR  0x10C // Transmit Counter Register
#define AT91_SPI_NRPR 0x110 // Next Receive Pointer Register
#define AT91_SPI_NRCR 0x114 // Next Receive Counter Register
#define AT91_SPI_NTPR 0x118 // Next Transmit Pointer Register
#define AT91_SPI_NTCR 0x11C // Next Transmit Counter Register
#define AT91_SPI_PTCR 0x120 // PDC Transfer Control Register
#define AT91_SPI_PTSR 0x124 // PDC Transfer Status Register
 
// Peripheral Input/Output Controllers
#define AT91_PIOA   0xFFFFF400
#if defined(CYGHWR_HAL_ARM_AT91SAM7X) || \
    defined(CYGHWR_HAL_ARM_AT91SAM7SE)
#define AT91_PIOB   0xFFFFF600
#endif
#if defined(CYGHWR_HAL_ARM_AT91SAM7SE)
#define AT91_PIOC   0xFFFFF800
#endif
 
// USART
 
#define AT91_USART0 0xFFFC0000
#define AT91_USART1 0xFFFC4000
 
// Define USART2 to be the debug UART. It is similar enough to a USART
// that both the hal_diag and interrupt driven driver will work.
// However trying to change parity, start/stop bits etc will not work.
#define CYGNUM_HAL_INTERRUPT_USART2 CYGNUM_HAL_INTERRUPT_DBG
#define AT91_USART2 AT91_DBG
 
#ifndef __ASSEMBLER__
#ifdef CYGBLD_HAL_ARM_AT91_BAUD_DYNAMIC
extern cyg_uint32 hal_at91_us_baud(cyg_uint32 baud);
#define AT91_US_BAUD(baud) hal_at91_us_baud(baud)
#endif
#endif // __ASSEMBLER__
 
#define AT91_US_RPR  0x100 // Receive Pointer Register
#define AT91_US_RCR  0x104 // Receive Counter Register
#define AT91_US_TPR  0x108 // Transmit Pointer Register
#define AT91_US_TCR  0x10C // Transmit Counter Register
#define AT91_US_NRPR 0x110 // Next Receive Pointer Register
#define AT91_US_NRCR 0x114 // Next Receive Counter Register
#define AT91_US_NTPR 0x118 // Next Transmit Pointer Register
#define AT91_US_NTCR 0x11C // Next Transmit Counter Register
#define AT91_US_PTCR 0x120 // PDC Transfer Control Register
#define AT91_US_PTSR 0x124 // PDC Transfer Status Register
 
// PIO - Programmable I/O
 
#define AT91_PIO    AT91_PIOA
 
// TC - Timer Counter
 
#define AT91_TC     0xFFFA0000
 
// Power Management Controller
 
#define AT91_PMC    0xFFFFFC00
 
#define AT91_PMC_MOR  0x20 // Main Oscillator Register
#define AT91_PMC_MOR_MOSCEN    (1 << 0) // Main Oscillator Enable
#define AT91_PMC_MOR_OSCBYPASS (1 << 1) // Main Oscillator Bypass
#define AT91_PMC_MOR_OSCCOUNT(x) (x << 8) // Slow clocks ticks
#define AT91_PMC_MCFR 0x24 // Main Clock Frequency Register
#define AT91_PMC_PLLR 0x2c // PLL Register
#define AT91_PMC_PLLR_DIV(x)      ((x) <<  0)  // PLL Devide
#define AT91_PMC_PLLR_PLLCOUNT(x) ((x) <<  8)  // PLL Count
#define AT91_PMC_PLLR_MUL(x)      ((x) << 16)  // PLL Devide
#define AT91_PMC_PLLR_OUT_0 (0 << 14)
#define AT91_PMC_PLLR_OUT_1 (1 << 14)
#define AT91_PMC_PLLR_OUT_2 (2 << 14)
#define AT91_PMC_PLLR_OUT_3 (3 << 14)
#define AT91_PMC_PLLR_USBDIV_0 (0 << 28) // USB clock is PLL clock / 1
#define AT91_PMC_PLLR_USBDIV_1 (1 << 28) // USB clock is PLL clock / 2
#define AT91_PMC_PLLR_USBDIV_2 (2 << 28) // USB clock is PLL clock / 4
#define AT91_PMC_MCKR 0x30 // Master Clock Register
#define AT91_PMC_MCKR_SLOW_CLK (0 << 0) // Slow clock selected
#define AT91_PMC_MCKR_MAIN_CLK (1 << 0) // Main clock selected
#define AT91_PMC_MCKR_PLL_CLK  (3 << 0) // PLL clock selected
#define AT91_PMC_MCKR_PRES_CLK    (0 << 2) // divide by 1
#define AT91_PMC_MCKR_PRES_CLK_2  (1 << 2) // divide by 2
#define AT91_PMC_MCKR_PRES_CLK_4  (2 << 2) // divide by 4
#define AT91_PMC_MCKR_PRES_CLK_8  (3 << 2) // divide by 8
#define AT91_PMC_MCKR_PRES_CLK_16 (4 << 2) // divide by 16
#define AT91_PMC_MCKR_PRES_CLK_32 (5 << 2) // divide by 32
#define AT91_PMC_MCKR_PRES_CLK_64 (6 << 2) // divide by 64
#define AT91_PMC_PCKR0 0x40  // Programmable Clock Register 0
#define AT91_PMC_PCKR1 0x44  // Programmable Clock Register 1
#define AT91_PMC_PCKR2 0x48  // Programmable Clock Register 2
#define AT91_PMC_IER  0x60 // Interrupt Enable Register
#define AT91_PMC_IDR  0x64 // Interrupt Disable Register
#define AT91_PMC_SR   0x68 // Status Register
#define AT91_PMC_SR_MOSCS   (1 << 0) // Main oscillator stable
#define AT91_PMC_SR_LOCK    (1 << 2) // PLL Locked
#define AT91_PMC_SR_MCKRDY  (1 << 3) // MCK is ready to be enabled
#define AT91_PMC_SR_PCK0RDY (1 << 8) // Pad clock 0 is ready to be enabled
#define AT91_PMC_SR_PCK1RDY (1 << 9) // Pad clock 1 is ready to be enabled
#define AT91_PMC_SR_PCK2RDY (1 << 10) // Pad clock 2 is ready to be enabled
#define AT91_PMC_SR_PCK3RDY (1 << 11) // Pad clock 3 is ready to be enabled
#define AT91_PMC_IMR  0x6c // Interrupt Mask Register
 
#ifdef CYGHWR_HAL_ARM_AT91SAM7X
 
// EMAC - Ethernet Medium Access Controller
 
#define AT91_EMAC 0xFFFDC000
 
// CAN - Controller Area Network
 
#define AT91_CAN 0xFFFD0000
 
#endif
 
#if defined(CYGHWR_HAL_ARM_AT91SAM7_at91sam7x512) || \
    defined(CYGHWR_HAL_ARM_AT91SAM7_at91sam7s512) || \
    defined(CYGHWR_HAL_ARM_AT91SAM7_at91sam7se512)
#define AT91_MC_FMR0 AT91_MC_FMR
#define AT91_MC_FCR0 AT91_MC_FCR
#define AT91_MC_FSR0 AT91_MC_FSR
#define AT91_MC_FMR1 (AT91_MC_FMR + 0x10)
#define AT91_MC_FCR1 (AT91_MC_FCR + 0x10)
#define AT91_MC_FSR1 (AT91_MC_FSR + 0x10)
#endif
 
//----------------------------------------------------------------------
// The platform needs this initialization during the
// hal_hardware_init() function in the varient HAL.
#ifndef __ASSEMBLER__
extern void hal_plf_hardware_init(void);
#define HAL_PLF_HARDWARE_INIT() \
    hal_plf_hardware_init()
 
#ifdef CYGHWR_HAL_ARM_AT91SAM7X
extern void hal_plf_eth_init(void);
#define HAL_PLF_ETH_INIT() \
    hal_plf_eth_init()
#endif
 
#endif  //__ASSEMBLER__
 
#endif //CYGONCE_HAL_PLF_IO_H