URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [rtos/] [ecos-3.0/] [packages/] [hal/] [arm/] [at91/] [jtst/] [current/] [support/] [jtstflash.cpp] - Rev 856
Go to most recent revision | Compare with Previous | Blame | View Log
// jtstflash.cpp Andrea Michelotti amichelotti@atmel.com // simple flash software. Compiled with MS Visual Studio 6 /* Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * Neither the name of [original copyright holder] nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include "stdafx.h" #include "windows.h" #include <stdlib.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <io.h> static HANDLE hComm; #define PRG_FLASH 0x4392014 // #define BUFFER_SIZE 1024 #define FLASH_SIZE 1024*1024 #define PROTOK 0xc1a0c1a0 typedef struct { unsigned cmd; unsigned add; unsigned len; } command_t; unsigned check_ack(){ unsigned data; unsigned long len; //usleep(80000); //read(fd,&data,4); ReadFile(hComm,&data,4,&len,NULL); if(len!=4){ printf("## (check_ack) protocol error byte read %d, expected 4\n",len); exit(1); } if((data==PROTOK)){ // printf("## check ack :0x%x\n",data); return 0; } return data; } unsigned ask(unsigned cmd, unsigned address,unsigned len){ unsigned long rlen; command_t data; data.len = len; data.cmd = cmd; data.add = address; // printf("%% sending command\n"); //usleep(80000); WriteFile(hComm,&data.cmd,sizeof(data),&rlen,NULL); // sleep(1); /* if((res=check_ack(fd)) ==0){ // printf("* command OK\n"); return 0; } else { printf("## ACK check sending command failed 0x%x\n",res); }*/ // sleep(1); return 0; } void initCom(char* com){ DCB dcb; hComm = CreateFile ( com, GENERIC_READ|GENERIC_WRITE, 0, NULL, OPEN_EXISTING, 0, 0 ); if(hComm==INVALID_HANDLE_VALUE){ printf("## cannot open serial port %s\n",com); exit(1); } if(GetCommState(hComm,&dcb)==0){ printf("## cannot get serial status\n"); exit(1); } dcb.BaudRate= CBR_115200; dcb.ByteSize = 8; dcb.Parity = NOPARITY; dcb.StopBits = ONESTOPBIT; dcb.fDtrControl= DTR_CONTROL_DISABLE; dcb.fRtsControl = RTS_CONTROL_DISABLE; dcb.DCBlength = sizeof(dcb); if(SetCommState(hComm, &dcb)==0){ printf("## cannot set serial status\n"); exit(1); } } int main(int argc, char* argv[]) { int res,i,tot=0; char* s_dev="COM2"; char* s_fname=0; char* s_add=0; char* s_len=0; unsigned address=0x500000,len=0,tlen; FILE* mybin=0; struct stat info; char buffer[BUFFER_SIZE]; unsigned ok=0xc1a0c1a0; unsigned long lenw; for(i=1;i<argc;i++){ if(!strcmp(argv[i],"-d")){ s_dev = argv[++i]; continue; } if(!strcmp(argv[i],"-a")){ s_add = argv[++i]; continue; } /* if(!strcmp(argv[i],"-reset")){ operation = CMD_RESET; continue; }*/ if(!strcmp(argv[i],"-h")){ printf("usage is %s <bin> [-a <flash address>]\n",argv[0]); exit(0); } s_fname = argv[i]; // printf("name -> %s",s_fname); } if(s_fname){ mybin=fopen(s_fname,"rb"); if(mybin==0){ printf("## you must specify a valid filename\n"); exit(1); } } else { printf("## you must specify a valid filename\n"); exit(1); } if(s_add){ address=strtoul(s_add,0,0); } initCom(s_dev); { int fdf=fseek(mybin,0,SEEK_END ); fdf = ftell(mybin); fseek(mybin,0,SEEK_SET ); len = fdf- ftell(mybin); } printf("* binary len %d bytes flash add 0x%x..\n",len,address); if(ask(PRG_FLASH,address,len)!=0) { fclose(mybin); CloseHandle(hComm); return 0; } // check flsh id if((res=check_ack())!=0){ printf("## flash id check failed 0x%x\n",res); CloseHandle(hComm); exit(1); } printf("* flash id check ok\n"); WriteFile(hComm,&ok,4,&lenw,NULL); if((res=check_ack())!=0){ printf("## flash id check failed 0x%x\n",res); CloseHandle(hComm); exit(1); } printf("* erasing space address 0x%x... please wait\n",address); // verify erase if((res=check_ack())!=0){ printf("## verify erase failed 0x%x\n",res); CloseHandle(hComm); exit(1); } printf("* flash erase check ok\n"); printf("* start programming %d bytes.\n",len); tlen=len; while(len>0){ unsigned long ll=(len<BUFFER_SIZE)?len:BUFFER_SIZE; tot+=ll; fread(buffer,1,ll,mybin); //usleep(8000); //write(fd,buffer,ll); WriteFile(hComm,buffer,ll,&lenw,NULL); if(ll!=lenw){ printf("## error writing byte write %d != byte to write %d\n",lenw,ll); exit(1); } printf("* downloading %.3f (rem:%d bytes)\r",(tlen-len)*100.0/tlen,tot); if((res=check_ack())!=0){ printf("## programming failed base add 0x%x\n",res); // close(fd); // exit(1); } len-=ll; } printf("\n* 100%% end programming\n"); return 0; }
Go to most recent revision | Compare with Previous | Blame | View Log