URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [rtos/] [ecos-3.0/] [packages/] [hal/] [arm/] [e7t/] [current/] [ChangeLog] - Rev 838
Go to most recent revision | Compare with Previous | Blame | View Log
2009-01-31 Bart Veer <bartv@ecoscentric.com>
* cdl/hal_arm_e7t.cdl: update compiler flags for gcc 4.x
2009-01-24 Bart Veer <bartv@ecoscentric.com>
* cdl/hal_arm_e7t.cdl: switch from arm-elf-gcc to
arm-eabi-gcc. Remove -mno-short-load-words.
2009-01-08 John Dallaway <john@dallaway.org.uk>
* src/flash_cksum.tcl: Specify script interpreter via /usr/bin/env.
2004-04-22 Jani Monoses <jani@iv.ro>
* cdl/hal_arm_e7t.cdl :
Invoke tail with stricter syntax that works in latest coreutils.
2003-12-05 Andrew Lunn <andrew.lunn@ascom.ch>
* include/hal_diag.h: hal_delay_us is a C function.
* include/plf_io.h: Define HAL_IO_MACROS_NO_ADDRESS_MUNGING to
force the IO macros not to mung the addresses. This platform
don't need this.
2003-10-06 Chris Garry <cgarry@sweeneydesign.co.uk>
* include/plf_io.h: Correct (unused) defines for
E7T_ROMCON_BASE_MASK and E7T_ROMCON_NEXT_MASK.
2003-09-21 Gary Thomas <gary@mlbassoc.com>
* misc/redboot_ROM.ecm: Adjust for changes in RedBoot
template - DNS now must be enabled manually.
2003-07-18 Nick Garnett <nickg@balti.calivar.com>
* cdl/hal_arm_e7t.cdl:
Changed values for CYGNUM_HAL_RTC_NUMERATOR,
CYGNUM_HAL_RTC_DENOMINATOR and CYGNUM_HAL_RTC_PERIOD to
"default_value" from "calculated". This makes it easier
to change these values globally.
2003-02-05 Nick Garnett <nickg@calivar.com>
* include/plf_io.h (CYGARC_PHYSICAL_ADDRESS): Added this
definition to keep redboot_linux_exec.c happy.
2003-01-29 John Dallaway <jld@ecoscentric.com>
* src/flash_cksum.tcl: Accommodate latest Cygwin Tcl shell
(tclsh83.exe)
2002-10-19 Jonathan Larmour <jifl@eCosCentric.com>
* include/hal_platform_setup.h (PLATFORM_SETUP1): Only define if
ROM or ROMRAM, not if STUBS which can be RAM.
2002-04-15 Jesper Skov <jskov@redhat.com>
* include/hal_platform_setup.h (PLATFORM_SETUP1): Changed ldm/stm
to ldmia/stmia.
2002-03-06 Jesper Skov <jskov@redhat.com>
* misc/redboot_ROM.ecm: Added zlib package.
2001-10-02 Jonathan Larmour <jlarmour@redhat.com>
* cdl/hal_arm_e7t.cdl (CYGBLD_BUILD_REDBOOT_BIN): cygtclsh80 on
Cygwin can't deal with absolute paths correctly, so copy
flash_cksum.tcl into build directory.
2001-07-02 Jesper Skov <jskov@redhat.com>
* src/hal_diag.c (cyg_hal_plf_serial_getc_nonblock): Ack RX
interrupt after reading.
* include/pkgconf/mlt_arm_e7t_ram.mlt: Reserve 64kB for RedBoot.
* include/pkgconf/mlt_arm_e7t_ram.ldi: Same.
* src/hal_diag.c: Make some data type fixes. Try to ack interrupt
after reading data. Unable to test though due to some other
problem on diag output.
2001-04-17 Jesper Skov <jskov@redhat.com>
* cdl/hal_arm_e7t.cdl: Fix compiler flags. In particular, do now
allow unaligned access since the CPU doesn't handle it.
* include/hal_platform_setup.h (PLATFORM_SETUP1): Use proper
spells to init memory interface.
* src/e7t_misc.c (hal_hardware_init): Removed debug code, fix
cache init code.
* include/plf_io.h: Use uncached addresses for IO registers.
* include/hal_platform_setup.h: Found a hint for problems with
memory init.
* include/hal_cache.h (HAL_UCACHE_INVALIDATE_ALL): Tried to make
this a bit faster. Didn't help much though.
* src/hal_diag.c (cyg_hal_plf_serial_init): Remove unused variable.
2001-04-16 Gary Thomas <gthomas@redhat.com>
* cdl/hal_arm_e7t.cdl: Add CDL to describe CPU family.
2001-04-11 Jesper Skov <jskov@redhat.com>
* src/e7t_misc.c (hal_delay_us): Fixed.
* include/pkgconf/mlt_arm_e7t_rom.ldi: Updated.
* include/pkgconf/mlt_arm_e7t_rom.mlt: Same.
* include/pkgconf/mlt_arm_e7t_rom.h: Same.
* include/pkgconf/mlt_arm_e7t_ram.ldi: Updated.
* include/pkgconf/mlt_arm_e7t_ram.mlt: Same.
* include/pkgconf/mlt_arm_e7t_ram.h: Same.
2001-04-05 Jesper Skov <jskov@redhat.com>
* misc/redboot_ROM.ecm: Only read from debug port.
* src/redboot_module.c: Fail if attempted built in wrong config.
* src/e7t_misc.c (hal_IRQ_handler): Fixed comparisons.
2001-03-19 Jesper Skov <jskov@redhat.com>
* src/e7t_misc.c (hal_delay_us): Made it work. Not sure why the
interrupts don't actually fire. This will probably break when that
gets sorted out later.
* src/hal_diag.c (cyg_hal_plf_serial_getc_nonblock): Rename a
register.
* src/e7t_misc.c (hal_hardware_init): Init caches, clear global
interrupt mask flag.
(hal_delay_us): Added.
* include/plf_io.h: Added cache definitions.
* include/hal_diag.h (HAL_DELAY_US): Added.
* include/hal_cache.h: Rewrote for KS32C50100.
* misc/redboot_ROM.ecm: Added.
* src/redboot_module.c: Added.
* src/gdb_module.c: Removed.
* src/e7t_misc.c: Comment out test code, but keep it around for
now.
* cdl/hal_arm_e7t.cdl: Added RedBoot build magic. Removed stubs
build magic.
* include/hal_platform_setup.h: Set PIO directions and IO
widths. The rest cannot be set wo hanging the board.
* src/hal_diag.c: Baud rate is computed from 1/2 core clock. All
register access is 32 bit. Added simple functions to print out
values without use of RAM.
Enabling TX/RX means allowing interrupts. Rely on vector mask only
for controlling ctrl-c interrupts.
2001-03-16 Jesper Skov <jskov@redhat.com>
* src/e7t_misc.c: Rewrote timer and interrupt code for
E7T. Removed reset code.
* include/plf_io.h: Added interrupt controller and timer
registers.
* include/hal_platform_ints.h: Updated interrupt defintions to
match E7T. No reset magic.
* src/hal_diag.c: Use correct interrupt definitions.
* Cloned from AEB HAL.
//===========================================================================
// ####GPLCOPYRIGHTBEGIN####
// -------------------------------------------
// This file is part of eCos, the Embedded Configurable Operating System.
// Copyright (C) 1998, 1999, 2000, 2001, 2002 Free Software Foundation, Inc.
//
// This program is free software; you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation; either version 2 or (at your option) any
// later version.
//
// This program is distributed in the hope that it will be useful, but
// WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
// General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program; if not, write to the
// Free Software Foundation, Inc., 51 Franklin Street,
// Fifth Floor, Boston, MA 02110-1301, USA.
// -------------------------------------------
// ####GPLCOPYRIGHTEND####
//===========================================================================
Go to most recent revision | Compare with Previous | Blame | View Log