OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [rtos/] [ecos-3.0/] [packages/] [hal/] [arm/] [lpc2xxx/] [mcb2100/] [current/] [include/] [hal_platform_setup.h] - Rev 786

Compare with Previous | Blame | View Log

#ifndef CYGONCE_HAL_PLATFORM_SETUP_H
#define CYGONCE_HAL_PLATFORM_SETUP_H
 
/*=============================================================================
//
//      hal_platform_setup.h
//
//      Platform specific support for HAL (assembly code)
//
//=============================================================================
// ####ECOSGPLCOPYRIGHTBEGIN####                                            
// -------------------------------------------                              
// This file is part of eCos, the Embedded Configurable Operating System.   
// Copyright (C) 1998, 1999, 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
//
// eCos is free software; you can redistribute it and/or modify it under    
// the terms of the GNU General Public License as published by the Free     
// Software Foundation; either version 2 or (at your option) any later      
// version.                                                                 
//
// eCos is distributed in the hope that it will be useful, but WITHOUT      
// ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or    
// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License    
// for more details.                                                        
//
// You should have received a copy of the GNU General Public License        
// along with eCos; if not, write to the Free Software Foundation, Inc.,    
// 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.            
//
// As a special exception, if other files instantiate templates or use      
// macros or inline functions from this file, or you compile this file      
// and link it with other works to produce a work based on this file,       
// this file does not by itself cause the resulting work to be covered by   
// the GNU General Public License. However the source code for this file    
// must still be made available in accordance with section (3) of the GNU   
// General Public License v2.                                               
//
// This exception does not invalidate any other reasons why a work based    
// on this file might be covered by the GNU General Public License.         
// -------------------------------------------                              
// ####ECOSGPLCOPYRIGHTEND####                                              
//=============================================================================
//#####DESCRIPTIONBEGIN####
//
// Author(s):   jani 
// Contributors:
// Date:        2004-09-12
// Purpose:     LPC2XXX/MCB2100 platform specific support routines
// Description:
// Usage:       #include <cyg/hal/hal_platform_setup.h>
//
//####DESCRIPTIONEND####
//
//===========================================================================*/
 
#include <pkgconf/system.h>
#include <cyg/hal/var_io.h>
 
//===========================================================================*/
 
	.macro  _led_init
	ldr r0,=CYGARC_HAL_LPC2XXX_REG_IO_BASE
	ldr r1,=0x00FF0000	//GPIO1 pins 16..23 outputs
	str r1,[r0,#CYGARC_HAL_LPC2XXX_REG_IO1DIR]
	.endm
 
	.macro _led x
	ldr r0,=CYGARC_HAL_LPC2XXX_REG_IO_BASE
	ldr r1,=0x00FF0000
	str r1,[r0,#CYGARC_HAL_LPC2XXX_REG_IO1CLR]
	ldr r1,=(\x<<16)
	str r1,[r0,#CYGARC_HAL_LPC2XXX_REG_IO1SET]
	.endm
 
	.macro _pll_init
	ldr r0,=CYGARC_HAL_LPC2XXX_REG_SCB_BASE
 
	mov r2,#0xAA
	mov r3,#0x55
 
	mov r1,#1			                // enable PLL	
	str r1,[r0,#CYGARC_HAL_LPC2XXX_REG_PLLCON]
 
	mov r1,#(0x20 | (CYGNUM_HAL_ARM_LPC2XXX_PLL_MUL - 1))
	str r1,[r0,#CYGARC_HAL_LPC2XXX_REG_PLLCFG]
 
	str r2,[r0,#CYGARC_HAL_LPC2XXX_REG_PLLFEED]	// update PLL registers
	str r3,[r0,#CYGARC_HAL_LPC2XXX_REG_PLLFEED]
 
1:
	ldr r1,[r0,#CYGARC_HAL_LPC2XXX_REG_PLLSTAT]	// wait for it to lock
	ands r1,r1,#(1<<10)
	beq 1b
 
	mov r1,#3			                // connect PLL
	str r1,[r0,#CYGARC_HAL_LPC2XXX_REG_PLLCON]
 
	str r2,[r0,#CYGARC_HAL_LPC2XXX_REG_PLLFEED]	// update PLL registers
	str r3,[r0,#CYGARC_HAL_LPC2XXX_REG_PLLFEED]
 
	.endm
 
	.macro _mem_init
	mov r0,#0			// copy first 64 bytes of flash to RAM
	mov r1,#0x40000000
	mov r2,#0x40
1:
	ldr r3,[r0,#4]!
	str r3,[r1,#4]!
	cmps r0,r2
	bne 1b
 
	ldr r0,=CYGARC_HAL_LPC2XXX_REG_SCB_BASE
	mov r1,#2
        // interrupt vector table is mapped to flash (1) or RAM(2)	
	str r1, [r0,#CYGARC_HAL_LPC2XXX_REG_MEMMAP]	
	mov r1,#4
	str r1,[r0,#CYGARC_HAL_LPC2XXX_REG_MAMTIM]	// flash timings
	mov r1,#2
	str r1,[r0,#CYGARC_HAL_LPC2XXX_REG_MAMCR]	// enable full MAM
	.endm
 
        .macro _gpio_init
        //enable  RX and TX on both UARTs, EINT1
	ldr r0,=CYGARC_HAL_LPC2XXX_REG_PIN_BASE	
	ldr r1,=0x20050005
	str r1,[r0,#CYGARC_HAL_LPC2XXX_REG_PINSEL0]
	.endm
 
#define CYGHWR_LED_MACRO _led \x 
 
//===========================================================================*/
 
#if defined(CYG_HAL_STARTUP_ROM)
 
 
        .macro  _setup
 
	_pll_init
 
	_mem_init
 
	_gpio_init
 
	_led_init
 
        .endm
 
#define CYGSEM_HAL_ROM_RESET_USES_JUMP
 
#else
 
        .macro  _setup
        .endm
 
#endif
 
#define PLATFORM_SETUP1     _setup
 
//-----------------------------------------------------------------------------
// end of hal_platform_setup.h
#endif // CYGONCE_HAL_PLATFORM_SETUP_H
 

Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.