Subversion Repositories openrisc

2009-01-31  Bart Veer <bartv@ecoscentric.com>

        * cdl/hal_arm_sa11x0_ipaq.cdl: update compiler flags for
          recent gcc

2003-09-21  Gary Thomas  <gary@mlbassoc.com>

        * misc/redboot_RAM.ecm: 
        * misc/redboot_ROM.ecm:  Adjust for changes in RedBoot
        template - DNS now must be enabled manually.

2002-09-20  Gary Thomas  <gthomas@ecoscentric.com>

        * src/lcd_support.c (lcd_comm_control): Need to ingore BAUD commands
        since they may confuse RedBoot.

        * include/ipaq.h: Define "LinkUP Systems" PCMCIA controller.  Used
        on Compaq dual PCMCIA sleeve.

2002-08-12  Mark Salter  <msalter@redhat.com>

        * misc/redboot_ROM.ecm: Remove CYGSEM_REDBOOT_ARM_LINUX_BOOT.
        * misc/redboot_RAM.ecm: Ditto.

2002-05-14  Jesper Skov  <jskov@redhat.com>

        * src/atmel_support.c: Fixed warning.

2002-05-07  Gary Thomas  <gthomas@redhat.com>

        * cdl/hal_arm_sa11x0_ipaq.cdl: 
        Standardize CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT usage.


2002-04-12  Gary Thomas  <gthomas@redhat.com>

        * src/redboot_cmds.c: 
        * src/lcd_support.c: 
        * src/kbd.xpm: 
        * src/ipaq_misc.c: 
        * src/atmel_support.c: Clean up warnings.

2002-04-03  Jesper Skov  <jskov@redhat.com>

        * src/lcd_support.c: Don't use sscanf - it may rely on stuff that
        is only initialized later.

        * src/ipaq_misc.c (plf_if_init): lcd_init is always called.

2002-03-06  Mark Salter  <msalter@redhat.com>

        * src/lcd_support.c (lcd_init): Tweak LCD settings.

2002-02-21  Gary Thomas  <gthomas@redhat.com>

        * src/lcd_support.c (lcd_on): Only enable LCD if LCD/TS is being used 
        as the console.  This keeps the LCD backlight off which in turn makes
        the unit run cooler (and longer).

2002-01-28  Jesper Skov  <jskov@redhat.com>

        * include/plf_io.h: Added.

2001-09-28  Richard Panton <rpanton@3glab.com>

        * include/hal_platform_setup.h: Use correct MMU control register bits
        during initial disable.

2001-08-22  Gary Thomas  <gthomas@redhat.com>

        * src/redboot_cmds.c: 
        * src/lcd_support.c: 
        printf() is no longer a part of RedBoot.  Thus all programs
        must use diag_printf() and related functions instead.

2001-07-23  Gary Thomas  <gthomas@redhat.com>

        * include/hal_platform_ints.h: 
        * cdl/hal_arm_sa11x0_ipaq.cdl: 
        Define sample "extended interrupt" support.

2001-06-22  Gary Thomas  <gthomas@redhat.com>

        * misc/redboot_WinCE.ecm: 
        * misc/redboot_ROM.ecm: 
        * misc/redboot_RAM.ecm: Force stack size to 6K.

2001-06-21  Jonathan Larmour  <jlarmour@redhat.com>

        * images/*: Remove. Don't bloat repository with things already on
        the web.

2001-06-08  Gary Thomas  <gthomas@redhat.com>

        * include/pkgconf/mlt_arm_sa11x0_ipaq_rom.mlt: 
        * include/pkgconf/mlt_arm_sa11x0_ipaq_rom.ldi: Relax heap alignment.

2001-05-24  Gary Thomas  <gthomas@redhat.com>

        * misc/redboot_ROM.ecm: 
        * misc/redboot_RAM.ecm: Remove 'RedBoot[backup]' image by
        default - to make room for Linux kernel.

2001-05-16  Gary Thomas  <gthomas@redhat.com>

        * include/hal_platform_setup.h: Always init UART3.  Add support
        for deep sleep/resume.  Note: this has only been tested from
        Linux.  Support for sleep/resume will have to come later for eCos.

2001-04-30  Gary Thomas  <gthomas@redhat.com>

        * include/hal_platform_setup.h (CYGSEM_HAL_ROM_RESET_USES_JUMP): 
        Explicitly defined to handle strange startup situations.

2001-04-27  Jonathan Larmour  <jlarmour@redhat.com>

        * cdl/hal_arm_sa11x0_ipaq.cdl: Remove redundant -Wl,-N from link flags

2001-04-18  Gary Thomas  <gthomas@redhat.com>

        * include/hal_platform_setup.h: Clean up Compaq startup mode which
        needs to behave like ROM startup with minor differences.

2001-04-09  Jonathan Larmour  <jlarmour@redhat.com>

        * src/lcd_support.c: Frame pointer was right before.

2001-04-03  Jonathan Larmour  <jlarmour@redhat.com>

        * misc/elinux.patch: Add patch for Linux to allow co-existence
        with RedBoot. (authored by Gary)

2001-04-03  Gary Thomas  <gthomas@redhat.com>

        * include/pkgconf/mlt_arm_sa11x0_ipaq_compaq.mlt: 
        * include/pkgconf/mlt_arm_sa11x0_ipaq_compaq.ldi: 
        * include/pkgconf/mlt_arm_sa11x0_ipaq_compaq.h: New file(s).

        * src/lcd_support.c (lcd_comm_getc_nonblock): Force LCD on
        whenever there is a keystroke or button pushed.

        * misc/redboot_WinCE.ecm: 
        * misc/redboot_ROM.ecm: 
        * misc/redboot_RAM.ecm: 
        * misc/redboot_Compaq.ecm: New file(s) - standard RedBoot configurations.
        * images/redboot_WinCE.srec: 
        * images/redboot_WinCE.elf: 
        * images/redboot_WinCE.bin: 
        * images/redboot_ROM.srec: 
        * images/redboot_ROM.elf: 
        * images/redboot_ROM.bin: 
        * images/redboot_RAM.srec: 
        * images/redboot_RAM.elf: 
        * images/redboot_RAM.bin: 
        * images/redboot_Compaq.srec: 
        * images/redboot_Compaq.elf: 
        * images/redboot_Compaq.bin: New file(s) - standard RedBoot images.

        * images/OSloader: New file - imported from Compaq.

        * cdl/hal_arm_sa11x0_ipaq.cdl: Add 'Compaq' startup type.

2001-04-02  Gary Thomas  <gthomas@redhat.com>

        * src/lcd_support.c: Define virtual screen to be 80x??, with only
        a 30 character wide window showing (in portrait mode).  Use the 
        joypad to pan around.  Also, restore cursor support.
        (lcd_comm_init): Set up default keyboard parameters and let the
        initialization (calibration) abort/timeout.
        (lcd_refresh): Fix problem with pan right.

        * src/kbd.xpm: Revert to using "small" keyboard graphic.

        * src/font.h: Add special character for block cursor.

        * src/lcd_support.c (lcd_comm_getc_nonblock): Rework keyboard 
        input to make it more responsive/smoother.

2001-03-24  Gary Thomas  <gthomas@redhat.com>

        * cdl/hal_arm_sa11x0_ipaq.cdl: LCD comm only in RedBoot mode.   

2001-03-23  Gary Thomas  <gthomas@redhat.com>

        * src/lcd_support.c (init_kbd_coord): Make screen calibration more
        user friendly.  User can abort at any time with 'return' button.

        * cdl/hal_arm_sa11x0_ipaq.cdl: Set default clock speed to 206MHz.

2001-03-21  Gary Thomas  <gthomas@redhat.com>

        * include/pkgconf/mlt_arm_sa11x0_ipaq_rom.ldi: 
        * include/pkgconf/mlt_arm_sa11x0_ipaq_rom.mlt: Decrease heap alignment.

        * src/lcd_support.c: Keyboard map had / & \ backwards.

2001-03-20  Gary Thomas  <gthomas@redhat.com>

        * src/redboot_cmds.c (idle): Add idle processing - turn off LCD
        screen and backlight when not in use.

        * src/lcd_support.c: 
        * include/lcd_support.h (lcd_getinfo): New function used to export
        information about LCD screen, video memory, etc.
        (lcd_on): New function - used to enable/disable screen.

2001-03-14  Gary Thomas  <gthomas@redhat.com>

        * src/lcd_support.c: Improved LCD virtual keyboard support.
        Better initialization and setup.  Remember parameters so it's
        not necessary to calibrate on every boot.

        * include/pkgconf/mlt_arm_sa11x0_ipaq_rom.mlt: 
        * include/pkgconf/mlt_arm_sa11x0_ipaq_rom.ldi: 
        * include/pkgconf/mlt_arm_sa11x0_ipaq_rom.h: 
        * include/pkgconf/mlt_arm_sa11x0_ipaq_ram.mlt: 
        * include/pkgconf/mlt_arm_sa11x0_ipaq_ram.ldi: 
        * include/pkgconf/mlt_arm_sa11x0_ipaq_ram.h: Reserve LCD memory.

        * include/ipaq.h: 
        * include/hal_platform_setup.h: Add LCD screen parameters to fixed area.

2001-03-09  Gary Thomas  <gthomas@redhat.com>

        * include/pkgconf/mlt_arm_sa11x0_ipaq_wince.mlt: 
        * include/pkgconf/mlt_arm_sa11x0_ipaq_wince.ldi: 
        * include/pkgconf/mlt_arm_sa11x0_ipaq_wince.h: New file(s).

        * include/hal_platform_setup.h: Support starting from Windows/CR.

        * cdl/hal_arm_sa11x0_ipaq.cdl: Add new startup type: WinCE.

2001-03-08  Jesper Skov  <jskov@redhat.com>

        * cdl/hal_arm_sa11x0_ipaq.cdl:  Removed
        CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT_GUARANTEED which is now the
        default.

2001-03-06  Gary Thomas  <gthomas@redhat.com>

        * src/lcd_support.c: Massive improvement in non-interrupt
        driven keyboard scanning.  Support 'return' button for ^C.
        Support control keymap.

        * src/atmel_support.c: Improve interrupt support.  Fix
        keypad [buttons] reporting.

        * include/atmel_support.h: Add interrupt driven support.
        Define button values (using icons for names).

2001-03-05  Gary Thomas  <gthomas@redhat.com>

        * src/lcd_support.c: Use new Atmel asynchronous handling.

        * src/ipaq_misc.c (plf_if_init): Always required [now].

        * src/atmel_support.c: Restructure for asynchronous event
        handling - many changes.

        * include/lcd_support.h: New file - define LCD interfaces.

        * include/atmel_support.h: Add asynchronous response handling.

2001-03-01  Gary Thomas  <gthomas@redhat.com>

        * cdl/hal_arm_sa11x0_ipaq.cdl: Define CYGINT_HAL_PLF_IF_INIT
        to indicate that this platform requires plf_if_init();.

        * src/lcd_support.c: Minor cleanup during screen calibrate.

        * src/ipaq_misc.c: Only init LCD when creating I/O channel.

2001-02-28  Gary Thomas  <gthomas@redhat.com>

        * src/ipaq_misc.c: Initialize LCD/TS I/O channel.

        * src/banner.xpm: Trim and clean up a few lines.

        * src/atmel_support.c: 
        * include/atmel_support.h: Define simple touch screen interface.

        * cdl/hal_arm_sa11x0_ipaq.cdl: Add CDL to support using LCD/TS
        as a communications channel.

        * src/lcd_support.c: Lots of changes.  Support pesudo keyboard
        using touchscreen.

        * src/kbd.xpm: New file.  Includes pixmaps for keyboard matrix.

2001-02-27  Gary Thomas  <gthomas@redhat.com>

        * src/lcd_support.c: Move logo to bottom of screen.  Also
        turn on LCD light using Atmel micro-controller.

        * src/ipaq_misc.c: Initialize Atmel hardware.

        * src/banner.xpm: Improve look in portrait mode (borders).

        * src/atmel_support.c: 
        * include/atmel_support.h: New file(s).  Interfaces to control
        and interact with the Atmel micro-controller which is used to
        handle the LCD light, LED, touch panel, etc.

        * cdl/hal_arm_sa11x0_ipaq.cdl: Adding Atmel micro-controller support.

2001-02-26  Jonathan Larmour  <jlarmour@redhat.com>

        * src/lcd_support.c: Define frame pointer with volatile correctly.
        Silence warnings.

2001-02-25  Gary Thomas  <gthomas@redhat.com>

        * src/lcd_support.c: Fix character rendering for 
        portrait mode.  Scrolling still broken.

        * src/font.h: New file - extracted from lcd_support.c

        * src/banner.xpm: Add portrait mode version.

        * src/lcd_support.c: Initial portrait mode support.

        * src/redboot_cmds.c (do_physaddr): Use common support.

        * src/lcd_support.c: Merge ISOINFRA changes from Assabet.
        Put frame buffer at end of RAM.

        * src/ipaq_misc.c: Remove unused code.  Enable LCD display.

        * include/hal_platform_setup.h: 
        Prune some debug code.  Fix up DRAM initialization.

        * cdl/hal_arm_sa11x0_ipaq.cdl: 
        Add option to enable DRAM controller init.

2001-02-24  Gary Thomas  <gthomas@redhat.com>

        * cdl/hal_arm_sa11x0_ipaq.cdl:  
        Define machine type for Linux bootstrap.

        * src/redboot_cmds.c: Linux 'exec' command now in generic code.
        
2001-02-24  Gary Thomas  <gthomas@redhat.com>

        * src/redboot_cmds.c:   
        * src/lcd_support.c: 
        * src/ipaq_misc.c: 
        * src/banner.xpm.bin: 
        * src/banner.xpm: 
        * misc/redboot_ROM.ecm: 
        * include/pkgconf/mlt_arm_sa11x0_ipaq_rom.mlt: 
        * include/pkgconf/mlt_arm_sa11x0_ipaq_rom.ldi: 
        * include/pkgconf/mlt_arm_sa11x0_ipaq_rom.h: 
        * include/pkgconf/mlt_arm_sa11x0_ipaq_ram.mlt: 
        * include/pkgconf/mlt_arm_sa11x0_ipaq_ram.ldi: 
        * include/pkgconf/mlt_arm_sa11x0_ipaq_ram.h: 
        * include/plf_mmap.h: 
        * include/ipaq.h (SA1110_EIO_IR_OFF): 
        * include/hal_platform_setup.h: 
        * include/hal_platform_ints.h: 
        * doc/README.ipaq: 
        * cdl/hal_arm_sa11x0_ipaq.cdl: New file(s) - initial import
        based on contribution by Richard Panton, 3G Labs, Inc.

//===========================================================================
// ####GPLCOPYRIGHTBEGIN####                                                
// -------------------------------------------                              
// This file is part of eCos, the Embedded Configurable Operating System.   
// Copyright (C) 1998, 1999, 2000, 2001, 2002 Free Software Foundation, Inc.
//
// This program is free software; you can redistribute it and/or modify     
// it under the terms of the GNU General Public License as published by     
// the Free Software Foundation; either version 2 or (at your option) any   
// later version.                                                           
//
// This program is distributed in the hope that it will be useful, but      
// WITHOUT ANY WARRANTY; without even the implied warranty of               
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU        
// General Public License for more details.                                 
//
// You should have received a copy of the GNU General Public License        
// along with this program; if not, write to the                            
// Free Software Foundation, Inc., 51 Franklin Street,                      
// Fifth Floor, Boston, MA  02110-1301, USA.                                
// -------------------------------------------                              
// ####GPLCOPYRIGHTEND####                                                  
//===========================================================================