Subversion Repositories openrisc

//==========================================================================
//
//      grg_misc.c
//
//      HAL misc board support code for Intel XScale GRG
//
//==========================================================================
// ####ECOSGPLCOPYRIGHTBEGIN####                                            
// -------------------------------------------                              
// This file is part of eCos, the Embedded Configurable Operating System.   
// Copyright (C) 1998, 1999, 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
//
// eCos is free software; you can redistribute it and/or modify it under    
// the terms of the GNU General Public License as published by the Free     
// Software Foundation; either version 2 or (at your option) any later      
// version.                                                                 
//
// eCos is distributed in the hope that it will be useful, but WITHOUT      
// ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or    
// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License    
// for more details.                                                        
//
// You should have received a copy of the GNU General Public License        
// along with eCos; if not, write to the Free Software Foundation, Inc.,    
// 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.            
//
// As a special exception, if other files instantiate templates or use      
// macros or inline functions from this file, or you compile this file      
// and link it with other works to produce a work based on this file,       
// this file does not by itself cause the resulting work to be covered by   
// the GNU General Public License. However the source code for this file    
// must still be made available in accordance with section (3) of the GNU   
// General Public License v2.                                               
//
// This exception does not invalidate any other reasons why a work based    
// on this file might be covered by the GNU General Public License.         
// -------------------------------------------                              
// ####ECOSGPLCOPYRIGHTEND####                                              
//==========================================================================
//#####DESCRIPTIONBEGIN####
//
// Author(s):    msalter
// Contributors: msalter
// Date:         2003-02-05
// Purpose:      HAL board support
// Description:  Implementations of HAL board interfaces
//
//####DESCRIPTIONEND####
//
//========================================================================*/
 
#include <pkgconf/hal.h>
#include <pkgconf/system.h>
#include CYGBLD_HAL_PLATFORM_H
 
#include <cyg/infra/cyg_type.h>     // base types
#include <cyg/infra/cyg_trac.h>     // tracing macros
#include <cyg/infra/cyg_ass.h>      // assertion macros
 
#include <cyg/hal/hal_io.h>         // IO macros
#include <cyg/hal/hal_arch.h>       // Register state info
#include <cyg/hal/hal_diag.h>
#include <cyg/hal/hal_intr.h>       // Interrupt names
#include <cyg/hal/hal_cache.h>
#include <cyg/hal/hal_ixp425.h>     // Hardware definitions
#include <cyg/hal/grg.h>            // Platform specifics
 
#include <cyg/infra/diag.h>             // diag_printf
 
//
// Platform specific initialization
//
 
void
plf_hardware_init(void)
{
    // POWER_FAIL IRQ
    HAL_GPIO_OUTPUT_DISABLE(GPIO_PWR_FAIL_IRQ_N);   
    HAL_INTERRUPT_CONFIGURE(CYGNUM_HAL_INTERRUPT_PWR_FAIL, 1, 0);
 
    // DSL IRQ
    HAL_GPIO_OUTPUT_DISABLE(GPIO_DSL_IRQ_N);
    HAL_INTERRUPT_CONFIGURE(CYGNUM_HAL_INTERRUPT_DSL, 1, 0);
 
    // SLIC_A IRQ
    HAL_GPIO_OUTPUT_DISABLE(GPIO_SLIC_A_IRQ_N);
    HAL_INTERRUPT_CONFIGURE(CYGNUM_HAL_INTERRUPT_SLIC_A, 1, 0);
 
    // SLIC_B IRQ
    HAL_GPIO_OUTPUT_DISABLE(GPIO_SLIC_B_IRQ_N);
    HAL_INTERRUPT_CONFIGURE(CYGNUM_HAL_INTERRUPT_SLIC_B, 1, 0);
 
    // DSP IRQ
    HAL_GPIO_OUTPUT_DISABLE(GPIO_DSP_IRQ_N);
    HAL_INTERRUPT_CONFIGURE(CYGNUM_HAL_INTERRUPT_DSP, 1, 0);
 
    // IDE IRQ
    HAL_GPIO_OUTPUT_DISABLE(GPIO_IDE_IRQ_N);
    HAL_INTERRUPT_CONFIGURE(CYGNUM_HAL_INTERRUPT_IDE, 1, 0);
 
    // IO RESET_N  (DSP/SLICs)
    HAL_GPIO_OUTPUT_SET(GPIO_IO_RESET_N);
    HAL_GPIO_OUTPUT_ENABLE(GPIO_IO_RESET_N);
 
    // SPI_CS1_N
    HAL_GPIO_OUTPUT_SET(GPIO_SPI_CS1_N);
    HAL_GPIO_OUTPUT_ENABLE(GPIO_SPI_CS1_N);   // Eth PHY
 
    // SPI_CS0_N
    HAL_GPIO_OUTPUT_SET(GPIO_SPI_CS0_N);
    HAL_GPIO_OUTPUT_ENABLE(GPIO_SPI_CS0_N);   // SLICs
 
    // SPI_SCK
    HAL_GPIO_OUTPUT_CLEAR(GPIO_SPI_SCK);
    HAL_GPIO_OUTPUT_ENABLE(GPIO_SPI_SCK);
 
    // SPI_SDI
    HAL_GPIO_OUTPUT_CLEAR(GPIO_SPI_SDI);
    HAL_GPIO_OUTPUT_ENABLE(GPIO_SPI_SDI);
 
    // SPI_SDI
    HAL_GPIO_OUTPUT_DISABLE(GPIO_SPI_SDI);
 
#ifdef CYGPKG_IO_PCI
    extern void hal_plf_pci_init(void);
    hal_plf_pci_init();
#endif
}
 
// ------------------------------------------------------------------------
// EOF grg_misc.c