Subversion Repositories openrisc

# ====================================================================
#
#      hal_arm_xscale_ixp425.cdl
#
#      Intel XScale architectural HAL package configuration data
#
# ====================================================================
## ####ECOSGPLCOPYRIGHTBEGIN####                                            
## -------------------------------------------                              
## This file is part of eCos, the Embedded Configurable Operating System.   
## Copyright (C) 1998, 1999, 2000, 2001, 2002, 2009 Free Software Foundation, Inc.
##
## eCos is free software; you can redistribute it and/or modify it under    
## the terms of the GNU General Public License as published by the Free     
## Software Foundation; either version 2 or (at your option) any later      
## version.                                                                 
##
## eCos is distributed in the hope that it will be useful, but WITHOUT      
## ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or    
## FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License    
## for more details.                                                        
##
## You should have received a copy of the GNU General Public License        
## along with eCos; if not, write to the Free Software Foundation, Inc.,    
## 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.            
##
## As a special exception, if other files instantiate templates or use      
## macros or inline functions from this file, or you compile this file      
## and link it with other works to produce a work based on this file,       
## this file does not by itself cause the resulting work to be covered by   
## the GNU General Public License. However the source code for this file    
## must still be made available in accordance with section (3) of the GNU   
## General Public License v2.                                               
##
## This exception does not invalidate any other reasons why a work based    
## on this file might be covered by the GNU General Public License.         
## -------------------------------------------                              
## ####ECOSGPLCOPYRIGHTEND####                                              
# ====================================================================
######DESCRIPTIONBEGIN####
#
# Author(s):      msalter
# Original data:  msalter
# Contributors:
# Date:           2002-12-06
#
#####DESCRIPTIONEND####
#
# ====================================================================
cdl_package CYGPKG_HAL_ARM_XSCALE_IXP425 {
    display       "Intel XScale IXP425 Network Processor"
    parent        CYGPKG_HAL_ARM_XSCALE_CORE
    implements    CYGINT_HAL_DEBUG_GDB_STUBS
    implements    CYGINT_HAL_DEBUG_GDB_STUBS_BREAK
    implements    CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT
    implements    CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT
    hardware
    include_dir   cyg/hal
    define_header hal_arm_xscale_ixp425.h
    description   "
        This HAL variant package provides generic support
        for the Intel IXP425 network processors. It is also
        necessary to select a specific target platform HAL
        package."

    # Let the architectural HAL see this variant's interrupts file
    define_proc {
        puts $::cdl_header \
       "#define CYGBLD_HAL_VAR_INTS_H <cyg/hal/hal_var_ints.h>"
        puts $::cdl_header \
       "#define CYGBLD_HAL_VAR_H <cyg/hal/hal_ixp425.h>"

        puts $::cdl_system_header "#define CYGBLD_HAL_ARM_VAR_IO_H"
    }

    compile       ixp425_misc.c ixp425_pci.c ixp425_diag.c

    cdl_option CYGHWR_HAL_ARM_XSCALE_PROCESSOR_CCLK {
        display       "Processor clock rate"
        flavor        data
        default_value { CYGHWR_HAL_ARM_XSCALE_PROCESSOR_CCLK_DEFAULT ?
                        CYGHWR_HAL_ARM_XSCALE_PROCESSOR_CCLK_DEFAULT : 533333}
        description   "
           The XScale processor can run at various frequencies.
           These values are expressed in KHz."
    }

    cdl_option CYGHWR_HAL_IXP425_PCI_NP_WORKAROUND {
        display "Enable IXP425 PCI NP read problem workaround"
        flavor bool
        default_value 0
    }
 
    # Real-time clock/counter specifics
    cdl_component CYGNUM_HAL_RTC_CONSTANTS {
        display       "Real-time clock constants"
        flavor        none
        no_define
    
        cdl_option CYGNUM_HAL_RTC_NUMERATOR {
            display       "Real-time clock numerator"
            flavor        data
            default_value 1000000000
        }
        cdl_option CYGNUM_HAL_RTC_DENOMINATOR {
            display       "Real-time clock denominator"
            flavor        data
            default_value 100
            description   "
              This option selects the heartbeat rate for the real-time clock.
              The rate is specified in ticks per second.  Change this value
              with caution - too high and your system will become saturated
              just handling clock interrupts, too low and some operations
              such as thread scheduling may become sluggish."
        }
        cdl_option CYGNUM_HAL_RTC_PERIOD {
            display       "Real-time clock period"
            flavor        data
            default_value 1000000/CYGNUM_HAL_RTC_DENOMINATOR
            description   "
              This value gives the RTC period in microseconds. It is
              translated into the actual clock period value in the clock
              init and read functions."
        }
    }

    cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT {
        display      "Default console channel."
        flavor       data
        legal_values 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
        calculated   0
    }
 
    cdl_option CYGNUM_HAL_ARM_IXP425_SERIAL_CHANNELS {
        display      "Number of IXP425 serial ports used on the board"
        flavor       data
        calculated   { (CYGSEM_HAL_IXP425_PLF_USES_UART1 && CYGSEM_HAL_IXP425_PLF_USES_UART2) ? 2 : \
                       (CYGSEM_HAL_IXP425_PLF_USES_UART1 || CYGSEM_HAL_IXP425_PLF_USES_UART2) ? 1 : \
                        0 }
    }
 
    cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS {
        display      "Number of communication channels on the board"
        flavor       data
        calculated   { CYGNUM_HAL_ARM_IXP425_SERIAL_CHANNELS + \
                       CYGNUM_HAL_IXP425_PLF_SERIAL_CHANNELS }
    }
 
    cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL {
        display          "Debug serial port"
        active_if        CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE
        flavor data
        legal_values     0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
        default_value    0
        description      "
            This option chooses which port will be used to connect to a host
            running GDB."
     }
 
     cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL {
         display          "Diagnostic serial port"
         active_if        CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
         flavor data
         legal_values     0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
         default_value    CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT
         description      "
            IXP425 boards may use two or more serial ports.  This option
            chooses which port will be used for diagnostic output."
     }

    cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_BAUD {
        display       "Diagnostic serial port baud rate"
        flavor        data
        legal_values  9600 19200 38400 57600 115200
        default_value 115200
        description   "
            This option selects the baud rate used for the diagnostic port.
            Note: this should match the value chosen for the GDB port if the
            diagnostic and GDB port are the same."
    }

    cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_BAUD {
        display       "Debug serial port baud rate"
        flavor        data
        legal_values  9600 19200 38400 57600 115200
        default_value 115200
        description   "
            This option selects the baud rate used for the GDB port."
    }

    cdl_component CYGPKG_REDBOOT_XSCALE_OPTIONS {
        display       "Redboot for XScale options"
        flavor        none
        no_define
        parent        CYGPKG_REDBOOT
        active_if     CYGPKG_REDBOOT
        description   "
            This option lists the target's requirements for a valid Redboot
            configuration."
        compile -library=libextras.a ixp425_redboot.c

        # RedBoot details
        requires { !CYGPKG_REDBOOT_BUILD_WITH_EXEC || CYGHWR_REDBOOT_ARM_LINUX_EXEC_ADDRESS_DEFAULT != 0 }
        define_proc {
            puts $::cdl_header "#define CYGHWR_REDBOOT_ARM_TRAMPOLINE_ADDRESS 0x00001f00"
            puts $::cdl_header "#define HAL_FLASH_READ(a,b,c,d) hal_flash_read((a),(b),(c),(d))"
            puts $::cdl_header "#define HAL_FLASH_PROGRAM(a,b,c,d) hal_flash_program((a),(b),(c),(d))"
        }
    }
}