URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [rtos/] [ecos-3.0/] [packages/] [hal/] [h8300/] [h8max/] [current/] [include/] [platform.inc] - Rev 786
Compare with Previous | Blame | View Log
#ifndef CYGONCE_HAL_PLATFORM_INC
#define CYGONCE_HAL_PLATFORM_INC
##=============================================================================
##
## platform.inc
##
## H8MAX "board" assembler header file
##
##=============================================================================
## ####ECOSGPLCOPYRIGHTBEGIN####
## -------------------------------------------
## This file is part of eCos, the Embedded Configurable Operating System.
## Copyright (C) 1998, 1999, 2000, 2001, 2002 Free Software Foundation, Inc.
##
## eCos is free software; you can redistribute it and/or modify it under
## the terms of the GNU General Public License as published by the Free
## Software Foundation; either version 2 or (at your option) any later
## version.
##
## eCos is distributed in the hope that it will be useful, but WITHOUT
## ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
## FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
## for more details.
##
## You should have received a copy of the GNU General Public License
## along with eCos; if not, write to the Free Software Foundation, Inc.,
## 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
##
## As a special exception, if other files instantiate templates or use
## macros or inline functions from this file, or you compile this file
## and link it with other works to produce a work based on this file,
## this file does not by itself cause the resulting work to be covered by
## the GNU General Public License. However the source code for this file
## must still be made available in accordance with section (3) of the GNU
## General Public License v2.
##
## This exception does not invalidate any other reasons why a work based
## on this file might be covered by the GNU General Public License.
## -------------------------------------------
## ####ECOSGPLCOPYRIGHTEND####
##=============================================================================
#######DESCRIPTIONBEGIN####
##
## Author(s): Yoshinori Sato
## Contributors: Yoshinori Sato,Masahiro Ochiai
## Date: 2002-08-10
## Purpose: H8MAX "board" definitions.
## Description: This file contains various definitions and macros that are
## required for writing assembly code for the H8MAX board
## Currently there are none
## Usage:
## #include <cyg/hal/platform.inc>
## ...
##
##
######DESCRIPTIONEND####
##
##=============================================================================
#include <pkgconf/hal.h>
#include <cyg/hal/mod_regs_bsc.h>
#include <cyg/hal/mod_regs_pio.h>
##-----------------------------------------------------------------------------
#define CYGPKG_HAL_H8300_MEMC_DEFINED
.macro hal_memc_init
#if defined(CYG_HAL_STARTUP_ROM)
mov.l #init_regs,er0
1:
mov.w @er0+,r2
beq 1f
mov.w #0x00ff,e2 ; internal I/O regs (2) high address
cmp.w #0xf000,r2
bhi 2f
dec.w #1,e2 ; internal I/O regs (1) high address
2:
mov.w @er0+,r1
mov.b r1l,@er2
bra 1b
init_regs:
#define INIT_REGS_DATA(REGS,DATA) \
.word (REGS & 0xffff),DATA
init_regs:
INIT_REGS_DATA(CYGARC_RTCOR,195)
INIT_REGS_DATA(CYGARC_RTMCSR,0x17)
INIT_REGS_DATA(CYGARC_DRCRB,0xb8)
INIT_REGS_DATA(CYGARC_DRCRA,0x38)
INIT_REGS_DATA(CYGARC_ASTCR,0xfa)
INIT_REGS_DATA(CYGARC_ABWCR,0xe0)
INIT_REGS_DATA(CYGARC_BCR ,0xc7)
INIT_REGS_DATA(CYGARC_CSCR ,0x1f)
INIT_REGS_DATA(CYGARC_WCRH ,0xfd)
INIT_REGS_DATA(CYGARC_WCRL ,0x44)
INIT_REGS_DATA(CYGARC_P1DDR,0xff)
INIT_REGS_DATA(CYGARC_P2DDR,0xff)
INIT_REGS_DATA(CYGARC_P6DDR,0xf6)
INIT_REGS_DATA(CYGARC_P8DDR,0xee)
.word 0
;; Special Thanks Masahiro Ochiai
;; External peripheral setup delay
1:
mov.l #420000,er0 ;wait 50ms
2:
dec.l #1,er0
bpl 2b
#endif
.endm
#define CYGPKG_HAL_H8300_DIAG_DEFINED
.macro hal_diag_init
mov.b #0x83,r0l
mov.b r0l,@CYGARC_PADDR
mov.b #0,r0l
mov.b r0l,@CYGARC_PADR
.endm
.macro hal_diag_excpt_start
.endm
.macro hal_diag_intr_start
.endm
.macro hal_diag_restore
.endm
.macro hal_diag_data
.endm
#if defined(CYGPKG_IO_ETH_DRIVERS)
#define CYGPKG_HAL_H8300_SAVED_VECTORS
.macro h8300_save_vectors
.byte 16
.endm
#endif
#------------------------------------------------------------------------------
#endif // ifndef CYGONCE_HAL_PLATFORM_INC
# end of platform.inc