Subversion Repositories openrisc

//=============================================================================
//
//      smsc37m81x.c
//
//      Init code for SMSC 37m81x super IO controller
//
//=============================================================================
// ####ECOSGPLCOPYRIGHTBEGIN####                                            
// -------------------------------------------                              
// This file is part of eCos, the Embedded Configurable Operating System.   
// Copyright (C) 1998, 1999, 2000, 2001, 2002 Free Software Foundation, Inc.
//
// eCos is free software; you can redistribute it and/or modify it under    
// the terms of the GNU General Public License as published by the Free     
// Software Foundation; either version 2 or (at your option) any later      
// version.                                                                 
//
// eCos is distributed in the hope that it will be useful, but WITHOUT      
// ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or    
// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License    
// for more details.                                                        
//
// You should have received a copy of the GNU General Public License        
// along with eCos; if not, write to the Free Software Foundation, Inc.,    
// 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.            
//
// As a special exception, if other files instantiate templates or use      
// macros or inline functions from this file, or you compile this file      
// and link it with other works to produce a work based on this file,       
// this file does not by itself cause the resulting work to be covered by   
// the GNU General Public License. However the source code for this file    
// must still be made available in accordance with section (3) of the GNU   
// General Public License v2.                                               
//
// This exception does not invalidate any other reasons why a work based    
// on this file might be covered by the GNU General Public License.         
// -------------------------------------------                              
// ####ECOSGPLCOPYRIGHTEND####                                              
//=============================================================================
//#####DESCRIPTIONBEGIN####
//
// Author(s):   jskov
// Contributors:jskov
// Date:        2001-04-02
// Description: Init code for SMSC 37m81x super IO controller
//
//####DESCRIPTIONEND####
//
//=============================================================================
 
#include <pkgconf/hal.h>
#include CYGBLD_HAL_PLATFORM_H
 
#include <cyg/hal/hal_arch.h>           // SAVE/RESTORE GP macros
#include <cyg/hal/hal_io.h>             // IO macros
#include <cyg/hal/hal_intr.h>           // interrupt vectors
 
 
// From page 137+ in SMSC-37m81x.pdf
#define SMSC_CONFIG             0xb80003f0
#define SMSC_CONFIG_DATA        0xb80003f1
 
#define SMSC_CONFIG_DEV         0x07
#define SMSC_CONFIG_ACTIVATE    0x30
#define SMSC_CONFIG_ENTER       0x55
#define SMSC_CONFIG_BASE_HIGH   0x60
#define SMSC_CONFIG_BASE_LOW    0x61
#define SMSC_CONFIG_IRQ         0x70
#define SMSC_CONFIG_EXIT        0xaa
#define SMSC_CONFIG_MODE        0xf0
 
#define SMSC_CONFIG_DEV_COM1    0x04
#define SMSC_CONFIG_DEV_COM2    0x05
 
#define SMSC_CONFIG_MODE_HIGH   0x02
 
#define SMSC_CONFIG_ACTIVATE_ENABLE 0x01
 
 
void
cyg_hal_init_superIO(void)
{
    HAL_WRITE_UINT8(SMSC_CONFIG, SMSC_CONFIG_ENTER);
 
    // Configure and enable COM1
    HAL_WRITE_UINT8(SMSC_CONFIG, SMSC_CONFIG_DEV);
    HAL_WRITE_UINT8(SMSC_CONFIG_DATA, SMSC_CONFIG_DEV_COM1);
 
    HAL_WRITE_UINT8(SMSC_CONFIG, SMSC_CONFIG_BASE_HIGH);
    HAL_WRITE_UINT8(SMSC_CONFIG_DATA, 0x03);
    HAL_WRITE_UINT8(SMSC_CONFIG, SMSC_CONFIG_BASE_LOW);
    HAL_WRITE_UINT8(SMSC_CONFIG_DATA, 0xf8);
 
    HAL_WRITE_UINT8(SMSC_CONFIG, SMSC_CONFIG_IRQ);
    HAL_WRITE_UINT8(SMSC_CONFIG_DATA,
                    (CYGNUM_HAL_INTERRUPT_TTY0-CYGNUM_HAL_INTERRUPT_EXTERNAL_BASE));
 
    HAL_WRITE_UINT8(SMSC_CONFIG, SMSC_CONFIG_MODE);
    HAL_WRITE_UINT8(SMSC_CONFIG_DATA, SMSC_CONFIG_MODE_HIGH);
 
    HAL_WRITE_UINT8(SMSC_CONFIG, SMSC_CONFIG_ACTIVATE);
    HAL_WRITE_UINT8(SMSC_CONFIG_DATA, SMSC_CONFIG_ACTIVATE_ENABLE);
 
    // Configure and enable COM2
    HAL_WRITE_UINT8(SMSC_CONFIG, SMSC_CONFIG_DEV);
    HAL_WRITE_UINT8(SMSC_CONFIG_DATA, SMSC_CONFIG_DEV_COM2);
 
    HAL_WRITE_UINT8(SMSC_CONFIG, SMSC_CONFIG_BASE_HIGH);
    HAL_WRITE_UINT8(SMSC_CONFIG_DATA, 0x02);
    HAL_WRITE_UINT8(SMSC_CONFIG, SMSC_CONFIG_BASE_LOW);
    HAL_WRITE_UINT8(SMSC_CONFIG_DATA, 0xf8);
 
    HAL_WRITE_UINT8(SMSC_CONFIG, SMSC_CONFIG_IRQ);
    HAL_WRITE_UINT8(SMSC_CONFIG_DATA,
                    (CYGNUM_HAL_INTERRUPT_TTY1-CYGNUM_HAL_INTERRUPT_EXTERNAL_BASE));
 
    HAL_WRITE_UINT8(SMSC_CONFIG, SMSC_CONFIG_MODE);
    HAL_WRITE_UINT8(SMSC_CONFIG_DATA, SMSC_CONFIG_MODE_HIGH);
 
    HAL_WRITE_UINT8(SMSC_CONFIG, SMSC_CONFIG_ACTIVATE);
    HAL_WRITE_UINT8(SMSC_CONFIG_DATA, SMSC_CONFIG_ACTIVATE_ENABLE);
 
    HAL_WRITE_UINT8(SMSC_CONFIG, SMSC_CONFIG_EXIT);
 
}
 
//-----------------------------------------------------------------------------
// end of smsc37m81x.c