Subversion Repositories openrisc

# ====================================================================
#
#      hal_mn10300_am33.cdl
#
#      MN10300/AM33 variant architectural HAL package configuration data
#
# ====================================================================
## ####ECOSGPLCOPYRIGHTBEGIN####                                            
## -------------------------------------------                              
## This file is part of eCos, the Embedded Configurable Operating System.   
## Copyright (C) 1998, 1999, 2000, 2001, 2002 Free Software Foundation, Inc.
##
## eCos is free software; you can redistribute it and/or modify it under    
## the terms of the GNU General Public License as published by the Free     
## Software Foundation; either version 2 or (at your option) any later      
## version.                                                                 
##
## eCos is distributed in the hope that it will be useful, but WITHOUT      
## ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or    
## FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License    
## for more details.                                                        
##
## You should have received a copy of the GNU General Public License        
## along with eCos; if not, write to the Free Software Foundation, Inc.,    
## 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.            
##
## As a special exception, if other files instantiate templates or use      
## macros or inline functions from this file, or you compile this file      
## and link it with other works to produce a work based on this file,       
## this file does not by itself cause the resulting work to be covered by   
## the GNU General Public License. However the source code for this file    
## must still be made available in accordance with section (3) of the GNU   
## General Public License v2.                                               
##
## This exception does not invalidate any other reasons why a work based    
## on this file might be covered by the GNU General Public License.         
## -------------------------------------------                              
## ####ECOSGPLCOPYRIGHTEND####                                              
# ====================================================================
######DESCRIPTIONBEGIN####
#
# Author(s):      jskov
# Original data:  nickg
# Contributors:   dmoseley
# Date:           1999-11-02
#
#####DESCRIPTIONEND####
#
# ====================================================================

cdl_package CYGPKG_HAL_MN10300_AM33 {
    display "MN10300 AM33 variant"
    parent        CYGPKG_HAL_MN10300
    implements    CYGINT_HAL_MN10300_VARIANT
    implements    CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT
    implements    CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT
    hardware
    include_dir   cyg/hal
    define_header hal_mn10300_am33.h
    description   "
           The MN10300 AM33 variant HAL package provides generic
           support for this processor architecture. It is also
           necessary to select a specific target platform HAL
           package."

    cdl_option CYGHWR_HAL_MN10300_AM33_REVISION {
        display       "AM33 architecture revision"
        flavor        data
        if {1} {
                legal_values  {1 2}
                default_value {1}
        } else {
        calculated {1}
        }
        description   "
            The AM33 architecture revision."
    }

    define_proc {
        puts $::cdl_header "#include <pkgconf/hal_mn10300.h>"
    }

    compile       var_misc.c variant.S am33_serial.c

    cdl_option CYGHWR_HAL_MN10300_PROCESSOR_OSC {
        display       "Processor Oscillator input"
        flavor        data
        legal_values  16666667 to 33333333
        default_value { CYGHWR_HAL_MN10300_PROCESSOR_OSC_DEFAULT ?
                        CYGHWR_HAL_MN10300_PROCESSOR_OSC_DEFAULT : 25000000}
        description   "
           The MN10300 processor can run at various frequencies. These
           values are expressed in Hz.  Note that there are several
           steppings of the MN10300 rated to run at different maximum
           frequencies.  Check the specs to make sure that your
           particular processor can run at the rate you select here."
    }

    # Real-time clock/counter specifics
    cdl_component CYGNUM_HAL_RTC_CONSTANTS {
        display       "Real-time clock constants."
        description   "
            The NUMERATOR divided by the DENOMINATOR gives the number of
            nanoseconds per tick. The PERIOD is the divider to be programmed
            into a hardware timer that is driven from an appropriate hardware
            clock, such that the timer overflows once per tick (normally
            generating a CPU interrupt to mark the end of a tick). The tick
            rate is typically 100Hz.
            The clock is generated with onboard 16-bit timers TM4 and TM5
            cascaded together to form a 32-bit timer."
        flavor none

        cdl_option CYGHWR_HAL_MN10300_IOCLK_SPEED {
            display          "Processor I/O clock speed (Hz)"
            flavor           data
            calculated       CYGHWR_HAL_MN10300_PROCESSOR_OSC
            description      "
                The processor I/O clock speed, from which onboard timers can
                draw their sources."
        }

        cdl_option CYGNUM_HAL_RTC_NUMERATOR {
            display       "Real-time clock numerator"
            flavor        data
            default_value (1000 * 1000 * 1000)
        }

        cdl_option CYGNUM_HAL_RTC_DENOMINATOR {
            display       "Real-time clock denominator"
            flavor        data
            default_value 100
            description   "
              This option selects the heartbeat rate for the real-time clock.
              The rate is specified in ticks per second.  Change this value
              with caution - too high and your system will become saturated
              just handling clock interrupts, too low and some operations
              such as thread scheduling may become sluggish."
        }

        cdl_option CYGNUM_HAL_RTC_PERIOD {
            display       "Real-time clock divisor"
            flavor        data
            default_value (CYGHWR_HAL_MN10300_IOCLK_SPEED / CYGNUM_HAL_RTC_DENOMINATOR)
        }
    }

    cdl_option CYGHWR_HAL_MN10300_VSR_TABLE_BASE {
        display       "AM33 VSR table base address"
        flavor        data
        calculated    { CYGHWR_HAL_MN10300_PLATFORM_VSR_TABLE_BASE ?
                        CYGHWR_HAL_MN10300_PLATFORM_VSR_TABLE_BASE : \
                        (CYGHWR_HAL_MN10300_AM33_REVISION > 1) ? 0x90000000 : 0x50000100 }
        description   "
            Base address of the VSR table."
    }

    cdl_option CYGHWR_HAL_MN10300_VV_TABLE_BASE {
        display       "AM33 Virtual Vectors table base address"
        flavor        data
        calculated    { CYGHWR_HAL_MN10300_PLATFORM_VV_TABLE_BASE ?
                        CYGHWR_HAL_MN10300_PLATFORM_VV_TABLE_BASE : \
                        CYGHWR_HAL_MN10300_PLATFORM_VSR_TABLE_BASE + 0x100 }
        description   "
            Base address of the virtual vectors table."
    }

    cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT {
        display      "Default console channel."
        flavor       data
        legal_values     0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
        calculated   0
    }
 
    cdl_option CYGNUM_HAL_AM33_SERIAL_CHANNELS {
        display      "Number of AM33 serial ports used on the board"
        flavor       data
        calculated   { (CYGSEM_HAL_AM33_PLF_USES_SERIAL0 && CYGSEM_HAL_AM33_PLF_USES_SERIAL1) ? 2 : \
                       (CYGSEM_HAL_AM33_PLF_USES_SERIAL0 || CYGSEM_HAL_AM33_PLF_USES_SERIAL1) ? 1 : \
                        0 }
    }
 
    cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS {
        display      "Number of communication channels on the board"
        flavor       data
        calculated   { CYGNUM_HAL_AM33_SERIAL_CHANNELS + \
                       CYGNUM_HAL_AM33_PLF_SERIAL_CHANNELS }
    }
 
    cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL {
        display          "Debug serial port"
        active_if        CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE
        flavor data
        legal_values     0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
        default_value    0
        description      "
            This option chooses which port will be used to connect to a host
            running GDB."
     }
 
     cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL {
         display          "Diagnostic serial port"
         active_if        CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
         flavor data
         legal_values     0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
         default_value    CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT
         description      "
            The AM33 board has two serial ports.  This option
            chooses which port will be used for diagnostic output."
     }

    cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_BAUD {
        display       "Diagnostic serial port baud rate"
        flavor        data
        legal_values  9600 19200 38400 57600 115200
        default_value 115200
        description   "
            This option selects the baud rate used for the diagnostic port.
            Note: this should match the value chosen for the GDB port if the
            diagnostic and GDB port are the same."
    }

    cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_BAUD {
        display       "Debug serial port baud rate"
        flavor        data
        legal_values  9600 19200 38400 57600 115200
        default_value 115200
        description   "
            This option selects the baud rate used for the GDB port."
    }

    make {
        <PREFIX>/lib/target.ld: <PACKAGE>/src/mn10300_am33.ld
        $(CC) -E -P -Wp,-MD,target.tmp -DEXTRAS=1 -xc $(INCLUDE_PATH) $(CFLAGS) -o $@ $<
        @echo $@ ": \\" > $(notdir $@).deps
        @tail -n +2 target.tmp >> $(notdir $@).deps
        @echo >> $(notdir $@).deps
        @rm target.tmp
    }

    cdl_option CYGBLD_LINKER_SCRIPT {
        display "Linker script"
        flavor data
        no_define
        calculated  { "src/mn10300_am33.ld" }
    }

    cdl_option CYGSEM_HAL_UNCACHED_FLASH_ACCESS {
        display       "Caching needn't be disabled to access flash"
        flavor        bool
        default_value 0
        description   "
            Enable this option if the hardware is able to program the flash
            without turning off CPU data caching."
    }

    cdl_component CYGPKG_REDBOOT_MN10300_AM33_OPTIONS {
        display       "Redboot for AM33 options"
        flavor        none
        no_define
        parent        CYGPKG_REDBOOT
        active_if     CYGPKG_REDBOOT
        description   "
            This option lists the target's requirements for a valid Redboot
            configuration."

        cdl_component CYGPKG_REDBOOT_AM33_LINUX_EXEC {
            display        "Provide the exec command in RedBoot"
            flavor         none
            parent         CYGPKG_REDBOOT_MN10300_AM33_OPTIONS
            active_if      CYGBLD_BUILD_REDBOOT_WITH_EXEC
            description    "
                This option contains requirements for booting linux
                from RedBoot. The component is enabled/disabled from
                RedBoots CDL."
            compile -library=libextras.a redboot_linux_exec.c

            cdl_option CYGHWR_REDBOOT_AM33_LINUX_CMD_ADDRESS {
                display       "Base address of linux kernel command line"
                flavor        data
                default_value 0x8C001000
                description   "
                   This is the base address of the area of memory used to
                   pass a command line to the Linux kernel. This should be
                   chosen to avoid overlap with the kernel and any ramdisk
                   image."
            }
        }
    }
}