Subversion Repositories openrisc

# ====================================================================
#
#      hal_powerpc_adder.cdl
#
#      PowerPC/ADDER board HAL package configuration data
#
# ====================================================================
## ####ECOSGPLCOPYRIGHTBEGIN####                                            
## -------------------------------------------                              
## This file is part of eCos, the Embedded Configurable Operating System.   
## Copyright (C) 1998, 1999, 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
##
## eCos is free software; you can redistribute it and/or modify it under    
## the terms of the GNU General Public License as published by the Free     
## Software Foundation; either version 2 or (at your option) any later      
## version.                                                                 
##
## eCos is distributed in the hope that it will be useful, but WITHOUT      
## ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or    
## FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License    
## for more details.                                                        
##
## You should have received a copy of the GNU General Public License        
## along with eCos; if not, write to the Free Software Foundation, Inc.,    
## 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.            
##
## As a special exception, if other files instantiate templates or use      
## macros or inline functions from this file, or you compile this file      
## and link it with other works to produce a work based on this file,       
## this file does not by itself cause the resulting work to be covered by   
## the GNU General Public License. However the source code for this file    
## must still be made available in accordance with section (3) of the GNU   
## General Public License v2.                                               
##
## This exception does not invalidate any other reasons why a work based    
## on this file might be covered by the GNU General Public License.         
## -------------------------------------------                              
## ####ECOSGPLCOPYRIGHTEND####                                              
# ====================================================================
######DESCRIPTIONBEGIN####
#
# Author(s):      jskov
# Original data:  hmt
# Contributors:   gthomas
# Date:           1999-11-02
#
#####DESCRIPTIONEND####
#
# ====================================================================

cdl_package CYGPKG_HAL_POWERPC_ADDER {
    display       "A&M ADDER PowerPC evaluation board"
    parent        CYGPKG_HAL_POWERPC
    requires      CYGPKG_HAL_POWERPC_MPC8xx
    define_header hal_powerpc_adder.h
    include_dir   cyg/hal
    description   "
        The ADDER HAL package provides the support needed to run
        eCos on a A&M ADDER board equipped with a PowerPC processor."

    compile       hal_diag.c hal_aux.c adder.S
    requires      { CYGPKG_IO_FLASH implies CYGPKG_DEVS_FLASH_AMD_AM29XXXXX_V2 }
    implements    CYGHWR_DEVS_FLASH_AMD_AM29XXXXX_V2_CACHED_ONLY
    compile       -library=libextras.a adder_flash.c

    implements    CYGINT_HAL_DEBUG_GDB_STUBS
    implements    CYGINT_HAL_DEBUG_GDB_STUBS_BREAK
    implements    CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT

    define_proc {
        puts $::cdl_system_header "#define CYGBLD_HAL_TARGET_H   <pkgconf/hal_powerpc_mpc8xx.h>"
        puts $::cdl_system_header "#define CYGBLD_HAL_PLATFORM_H <pkgconf/hal_powerpc_adder.h>"
        puts $::cdl_header "#define HAL_PLATFORM_EXTRA  \"\""
    }

    cdl_component CYGPKG_HAL_POWERPC_ADDER_MODEL {
        display       "Adder model"
        requires      CYGHWR_HAL_POWERPC_ADDER_I | CYGHWR_HAL_POWERPC_ADDER_II
        default_value 1
        no_define
        description "
           The sub-options of this component define the model of Adder"

        cdl_option  CYGHWR_HAL_POWERPC_ADDER_I {
            display       "Adder-I with 850"
            requires      !CYGHWR_HAL_POWERPC_ADDER_II
            requires      { CYGHWR_HAL_POWERPC_MPC8XX == "850" }
            default_value 0
            implements    CYGNUM_HAL_QUICC_SMC2
            implements    CYGNUM_HAL_QUICC_SCC3
            define_proc {
                puts $::cdl_header "#define HAL_PLATFORM_BOARD  \"A&M Adder\""
            }
            description "
                Select this model for an Adder with the MPC850 processor."
        }

        cdl_option  CYGHWR_HAL_POWERPC_ADDER_II {
            display       "Adder-II with 852T"
            requires      !CYGHWR_HAL_POWERPC_ADDER_I
            requires      { CYGHWR_HAL_POWERPC_MPC8XX == "852T" }
            default_value 0
            implements    CYGNUM_HAL_QUICC_SMC1
            implements    CYGNUM_HAL_QUICC_SCC3
            define_proc {
                puts $::cdl_header "#define HAL_PLATFORM_BOARD  \"A&M AdderII\""
            }
            description "
                Select this model for an Adder with the MPC852T processor."
        }
    }

    cdl_component CYG_HAL_STARTUP {
        display       "Startup type"
        flavor        data
        legal_values  {"RAM" "ROM" "ROMRAM"}
        default_value {"RAM"}
        no_define
        define -file system.h CYG_HAL_STARTUP
        description   "
           This option is used to control where the application program will
           run, either from RAM or ROM (flash) memory.  ROM based applications
           must be self contained, while RAM applications will typically assume
           the existence of a debug environment, such as RedBoot or GDB stubs."
    }

    cdl_option CYGHWR_HAL_POWERPC_BOARD_SPEED {
        display          "Development board clock speed (MHz)"
        flavor           data
        legal_values     { 47 48 50 100 }
        default_value    { (CYGHWR_HAL_POWERPC_ADDER_I ? 47 : 48) }
        requires         { (CYGHWR_HAL_POWERPC_ADDER_I && (CYGHWR_HAL_POWERPC_BOARD_SPEED == 47)) ||
                           (CYGHWR_HAL_POWERPC_ADDER_II && (CYGHWR_HAL_POWERPC_BOARD_SPEED != 47)) }
        description      "
           ADDER Development Boards have various system clock speeds
           depending on the processor fitted.  Select the clock speed
           appropriate for your board so that the system can set the serial
           baud rate correctly, amongst other things."
   }

    # Real-time clock/counter specifics
    cdl_component CYGNUM_HAL_RTC_CONSTANTS {
        display       "Real-time clock constants."
        description   "
            Period is busclock/16/100."
        flavor        none
    
        cdl_option CYGNUM_HAL_RTC_NUMERATOR {
            display       "Real-time clock numerator"
            flavor        data
            default_value 1000000000
        }
        cdl_option CYGNUM_HAL_RTC_DENOMINATOR {
            display       "Real-time clock denominator"
            flavor        data
            default_value 100
        }
        cdl_option CYGNUM_HAL_RTC_PERIOD {
            display       "Real-time clock period"
            flavor        data
# Timer clocks are based on OSCLK = 10MHz
            default_value { (((10*1000000)/4)/CYGNUM_HAL_RTC_DENOMINATOR) }
        }
    }
    
    cdl_component CYGBLD_GLOBAL_OPTIONS {
        display "Global build options"
        flavor  none
        description   "
            Global build options including control over
            compiler flags, linker flags and choice of toolchain."


        parent  CYGPKG_NONE

        cdl_option CYGBLD_GLOBAL_COMMAND_PREFIX {
            display "Global command prefix"
            flavor  data
            no_define
            default_value { "powerpc-eabi" }
            description "
                This option specifies the command prefix used when
                invoking the build tools."
        }

        cdl_option CYGBLD_GLOBAL_CFLAGS {
            display "Global compiler flags"
            flavor  data
            no_define
            default_value { CYGBLD_GLOBAL_WARNFLAGS . "-msoft-float -mcpu=860 -g -O2 -ffunction-sections -fdata-sections -fno-rtti -fno-exceptions" }
            description   "
                This option controls the global compiler flags which
                are used to compile all packages by
                default. Individual packages may define
                options which override these global flags."
        }

        cdl_option CYGBLD_GLOBAL_LDFLAGS {
            display "Global linker flags"
            flavor  data
            no_define
            default_value { "-msoft-float -mcpu=860 -g -nostdlib -Wl,--gc-sections -Wl,-static" }
            description   "
                This option controls the global linker flags. Individual
                packages may define options which override these global flags."
        }

        cdl_option CYGBLD_BUILD_GDB_STUBS {
            display "Build GDB stub ROM image"
            default_value 0
            requires { CYG_HAL_STARTUP == "ROM" }
            requires CYGSEM_HAL_ROM_MONITOR
            requires CYGBLD_BUILD_COMMON_GDB_STUBS
            requires CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
            requires CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
            requires CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
            requires ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
            requires ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
            no_define
            description "
                This option enables the building of the GDB stubs for the
                board. The common HAL controls takes care of most of the
                build process, but the platform CDL takes care of creating
                an S-Record data file suitable for programming using
                the board's EPPC-Bug firmware monitor."

            make -priority 320 {
                <PREFIX>/bin/gdb_module.bin : <PREFIX>/bin/gdb_module.img
                $(OBJCOPY) -O srec --change-address=0x02000000 $< $(@:.bin=.srec)
                $(OBJCOPY) -O binary $< $@
            }
        }
    }

    cdl_component CYGPKG_HAL_POWERPC_ADDER_OPTIONS {
        display "ADDER build options"
        flavor  none
        no_define
        description   "
            Package specific build options including control over
            compiler flags used only in building this package,
            and details of which tests are built."


        cdl_option CYGPKG_HAL_POWERPC_ADDER_CFLAGS_ADD {
            display "Additional compiler flags"
            flavor  data
            no_define
            default_value { "" }
            description   "
                This option modifies the set of compiler flags for
                building the ADDER HAL. These flags are used in addition
                to the set of global flags."
        }

        cdl_option CYGPKG_HAL_POWERPC_ADDER_CFLAGS_REMOVE {
            display "Suppressed compiler flags"
            flavor  data
            no_define
            default_value { "" }
            description   "
                This option modifies the set of compiler flags for
                building the ADDER HAL. These flags are removed from
                the set of global flags if present."
        }

        cdl_option CYGPKG_HAL_POWERPC_ADDER_TESTS {
            display "ADDER tests"
            flavor  data
            no_define
            default_value { "" }
            description   "
                This option specifies the set of tests for the ADDER HAL."
        }
    }

    cdl_component CYGHWR_MEMORY_LAYOUT {
        display "Memory layout"
        flavor data
        no_define
        calculated { CYG_HAL_STARTUP == "RAM" ? "powerpc_adder_ram" : \
                     CYG_HAL_STARTUP == "ROMRAM" ? "powerpc_adder_romram" : \
                                                "powerpc_adder_rom" }

        cdl_option CYGHWR_MEMORY_LAYOUT_LDI {
            display "Memory layout linker script fragment"
            flavor data
            no_define
            define -file system.h CYGHWR_MEMORY_LAYOUT_LDI
            calculated { CYG_HAL_STARTUP == "RAM" ? "<pkgconf/mlt_powerpc_adder_ram.ldi>" : \
                         CYG_HAL_STARTUP == "ROMRAM" ? "<pkgconf/mlt_powerpc_adder_romram.ldi>" : \
                                                    "<pkgconf/mlt_powerpc_adder_rom.ldi>" }
        }

        cdl_option CYGHWR_MEMORY_LAYOUT_H {
            display "Memory layout header file"
            flavor data
            no_define
            define -file system.h CYGHWR_MEMORY_LAYOUT_H
            calculated { CYG_HAL_STARTUP == "RAM" ? "<pkgconf/mlt_powerpc_adder_ram.h>" : \
                         CYG_HAL_STARTUP == "ROMRAM" ? "<pkgconf/mlt_powerpc_adder_romram.h>" : \
                                                    "<pkgconf/mlt_powerpc_adder_rom.h>" }
        }
    }

    cdl_option CYGSEM_HAL_ROM_MONITOR {
        display       "Behave as a ROM monitor"
        flavor        bool
        default_value 0
        parent        CYGPKG_HAL_ROM_MONITOR
        requires      { CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM" }
        description   "
            Enable this option if this program is to be used as a ROM monitor,
            i.e. applications will be loaded into RAM on the board, and this
            ROM monitor may process exceptions or interrupts generated from the
            application. This enables features such as utilizing a separate
            interrupt stack when exceptions are generated."
    }

    cdl_component CYGPKG_REDBOOT_HAL_OPTIONS {
        display       "Redboot HAL options"
        flavor        none
        no_define
        parent        CYGPKG_REDBOOT
        active_if     CYGPKG_REDBOOT
        description   "
            This option lists the target's requirements for a valid Redboot
            configuration."

        cdl_option CYGSEM_REDBOOT_PLF_LINUX_BOOT {
            active_if      CYGBLD_BUILD_REDBOOT_WITH_EXEC
            display        "Support booting Linux via RedBoot"
            flavor         bool
            default_value  1
            description    "
               This option enables RedBoot to support booting of a Linux kernel."

            compile plf_redboot_linux_exec.c
        }

        cdl_option CYGBLD_BUILD_REDBOOT_BIN {
            display       "Build Redboot ROM binary image"
            active_if     CYGBLD_BUILD_REDBOOT
            default_value 1
            no_define
            description "This option enables the conversion of the Redboot ELF
                         image to a binary image suitable for ROM programming."

#            compile -library=libextras.a redboot_cmds.c
 
            make -priority 325 {
                <PREFIX>/bin/redboot.bin : <PREFIX>/bin/redboot.elf
                $(OBJCOPY) --strip-debug $< $(@:.bin=.img) 
                $(OBJCOPY) -O srec $< $(@:.bin=.srec)
                $(OBJCOPY) -O binary $< $@
            }
        }
    }
}