Subversion Repositories openrisc

//=============================================================================
//
//      hal_aux.c
//
//      HAL auxiliary objects and code; per platform
//
//=============================================================================
// ####ECOSGPLCOPYRIGHTBEGIN####                                            
// -------------------------------------------                              
// This file is part of eCos, the Embedded Configurable Operating System.   
// Copyright (C) 1998, 1999, 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
//
// eCos is free software; you can redistribute it and/or modify it under    
// the terms of the GNU General Public License as published by the Free     
// Software Foundation; either version 2 or (at your option) any later      
// version.                                                                 
//
// eCos is distributed in the hope that it will be useful, but WITHOUT      
// ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or    
// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License    
// for more details.                                                        
//
// You should have received a copy of the GNU General Public License        
// along with eCos; if not, write to the Free Software Foundation, Inc.,    
// 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.            
//
// As a special exception, if other files instantiate templates or use      
// macros or inline functions from this file, or you compile this file      
// and link it with other works to produce a work based on this file,       
// this file does not by itself cause the resulting work to be covered by   
// the GNU General Public License. However the source code for this file    
// must still be made available in accordance with section (3) of the GNU   
// General Public License v2.                                               
//
// This exception does not invalidate any other reasons why a work based    
// on this file might be covered by the GNU General Public License.         
// -------------------------------------------                              
// ####ECOSGPLCOPYRIGHTEND####                                              
//=============================================================================
//#####DESCRIPTIONBEGIN####
//
// Author(s):   hmt
// Contributors:hmt
// Date:        1999-06-08
// Purpose:     HAL aux objects: startup tables.
// Description: Tables for per-platform initialization
//
//####DESCRIPTIONEND####
//
//=============================================================================
 
#include <pkgconf/hal.h>
#include <pkgconf/hal_powerpc_quicc.h>
 
#include <cyg/infra/cyg_type.h>
#include <cyg/hal/hal_mem.h>            // HAL memory definitions
#define CYGARC_HAL_COMMON_EXPORT_CPU_MACROS
#include <cyg/hal/ppc_regs.h>
#include <cyg/hal/quicc/ppc8xx.h>
#include <cyg/hal/hal_if.h>             // hal_if_init
#include <cyg/hal/hal_io.h>
#include CYGHWR_MEMORY_LAYOUT_H
 
// The memory map is weakly defined, allowing the application to redefine
// it if necessary. The regions defined below are the minimum requirements.
CYGARC_MEMDESC_TABLE CYGBLD_ATTRIB_WEAK = {
    // Mapping for the Adder 85x development boards
    CYGARC_MEMDESC_CACHE(   0xfe000000, 0x00800000 ), // ROM region
    CYGARC_MEMDESC_NOCACHE( 0xff000000, 0x00100000 ), // MCP registers
    CYGARC_MEMDESC_NOCACHE( 0xfa000000, 0x00400000 ), // Control/Status+LEDs
    CYGARC_MEMDESC_CACHE(   CYGMEM_REGION_ram, CYGMEM_REGION_ram_SIZE ), // Main memory
 
    CYGARC_MEMDESC_TABLE_END
};
 
void
_adder_set_leds(int pat);
 
//--------------------------------------------------------------------------
// Platform init code.
void
hal_platform_init(void)
{
    volatile EPPC *eppc = (volatile EPPC *)eppc_base();
 
    // Special routing information for CICR
    eppc->cpmi_cicr &= ~0xFF0000;  // Routing bits
    eppc->cpmi_cicr |= 0x240000;   // SCC2, SCC3 on "normal" bit positions
 
#if defined(CYGHWR_HAL_POWERPC_ADDER_I)
    eppc->pip_pbpar &= ~0x0000400E;   // PB29..30 AS GPIO
    eppc->pip_pbdir |=  0x0000400E;
    eppc->pip_pbdat  =  0x00004000;
#endif
 
#if defined(CYGHWR_HAL_POWERPC_ADDER_II)  
 
#if defined(CYGHWR_HAL_POWERPC_MPC8XX_852T)
    // Special settings - according to manual errata
    eppc->pio_papar &= ~0xffffffff;   // PA manatory settings
    eppc->pio_padir |=  0xffffffff;
 
    eppc->pip_pbpar &= ~0x0003ff07;   // PB29..31 AS GPIO
    eppc->pip_pbdir |=  0x0003ff07;
    eppc->pip_pbdat  =  0x00010007;
 
    eppc->pio_pcpar &= ~0xffffffff;   // PC manatory settings
    eppc->pio_pcdir |=  0xffffffff;
#endif
 
    eppc->pip_pbpar &= ~0x00000007;   // PB29..31 AS GPIO for LEDS
    eppc->pip_pbdir |=  0x00000007;
    eppc->pip_pbdat |=  0x00000007;
#endif
 
    hal_if_init();
 
    _adder_set_leds(0x1);
}
 
#ifdef CYGHWR_HAL_POWERPC_ADDER_I
void
_adder_set_leds(int pat)
{
    volatile EPPC *eppc = (volatile EPPC *)eppc_base();
 
    eppc->pip_pbdat = (eppc->pip_pbdat & ~0x0000000E) | (pat << 1);
}
 
int
_adder_get_leds(void)
{
    volatile EPPC *eppc = (volatile EPPC *)eppc_base();
 
    return ((eppc->pip_pbdat & 0x0000000E) >> 1);
}
#endif
 
#ifdef CYGHWR_HAL_POWERPC_ADDER_II
void
_adder_set_leds(int pat)
{
    volatile EPPC *eppc = (volatile EPPC *)eppc_base();
 
    eppc->pip_pbdat = (eppc->pip_pbdat & ~0x00000007) |(~(pat&0x0007) );
}
 
int
_adder_get_leds(void)
{
    volatile EPPC *eppc = (volatile EPPC *)eppc_base();
 
    return ((~(eppc->pip_pbdat & 0x00000007)) & 0x0007 );
}
#endif
 
// EOF hal_aux.c