URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [rtos/] [ecos-3.0/] [packages/] [hal/] [powerpc/] [csb281/] [current/] [ChangeLog] - Rev 851
Go to most recent revision | Compare with Previous | Blame | View Log
2009-01-31 Bart Veer <bartv@ecoscentric.com>
* cdl/hal_powerpc_csb281.cdl: update compiler flags for gcc 4.x
2008-11-07 Jonathan Larmour <jifl@eCosCentric.com>
* include/pkgconf/mlt_powerpc_csb281_ram.ldi:
* include/pkgconf/mlt_powerpc_csb281_rom.ldi:
* include/pkgconf/mlt_powerpc_csb281_romram.ldi:
Add SECTION_eh_frame and SECTION_RELOCS.
2003-09-21 Gary Thomas <gary@mlbassoc.com>
* misc/redboot_RAM.ecm:
* misc/redboot_ROM.ecm:
* misc/redboot_ROMRAM.ecm: Adjust for changes in RedBoot
template - DNS now must be enabled manually.
2003-08-28 Gary Thomas <gary@mlbassoc.com>
* src/redboot_linux_exec.c: Obsolete file - removed.
* src/plf_redboot_linux_exec.c: New file - platform specifics
for booting Linux kernel from RedBoot.
* cdl/hal_powerpc_csb281.cdl: Linux booting from RedBoot is
now supported at the architecture level. Changes to support
architecture/platform layering.
2003-07-18 Nick Garnett <nickg@balti.calivar.com>
* cdl/hal_powerpc_csb281.cdl:
Changed values for CYGNUM_HAL_RTC_NUMERATOR,
CYGNUM_HAL_RTC_DENOMINATOR and CYGNUM_HAL_RTC_PERIOD to
"default_value" from "calculated". This makes it easier
to change these values globally.
2003-06-23 Gary Thomas <gary@mlbassoc.com>
* src/csb281.S (HW_init): Initialize SDRAM drivers to 40 Ohm (less
current/noise, more reliable).
2003-03-18 Gary Thomas <gary@mlbassoc.com>
* src/hal_aux.c (_csb281_pci_init): Display PCI bus - disabled.
2003-03-11 Mark Salter <msalter@redhat.com>
* src/redboot_linux_exec.c (do_exec): Call eth_drv_stop as necessary.
2003-02-26 Gary Thomas <gary@mlbassoc.com>
* src/lcd_support.c (lcd_on): Enable/disable is still not stable.
2003-02-25 Gary Thomas <gary@mlbassoc.com>
* src/lcd_support.c (lcd_on): Fix enable/disable code.
2003-02-01 Gary Thomas <gary@mlbassoc.com>
* src/sed135x_16bit.c:
* src/sed1356_16bit.h:
* src/lcd_support.c
* src/font.h:
* src/banner.xpm:
* include/lcd_support.h: New file(s).
* src/hal_aux.c:
* cdl/hal_powerpc_csb281.cdl: Add support for LCD/CRT+PS/2 keyboard
as console device. Hardware support contributed by Mike Kelly of
Cogent.
2003-01-22 Jonathan Larmour <jifl@eCosCentric.com>
* include/pkgconf/mlt_powerpc_csb281_ram.h (CYGMEM_SECTION_heap1_SIZE):
Make this match the .mlt and .ldi definition.
2003-01-20 Gary Thomas <gary@mlbassoc.com>
* misc/redboot_ROMRAM.ecm:
* misc/redboot_ROM.ecm:
* misc/redboot_RAM.ecm: New config - with ESA in RedBoot/fconfig.
* cdl/hal_powerpc_csb281.cdl: Deprecate "tests" since there are none
at the moment, but leave the code as comments in case they return.
2003-01-03 Gary Thomas <gary@mlbassoc.com>
* src/hal_diag.c (cyg_hal_plf_serial_error): New function - fixed
some random [timing?] problems with getc().
* src/csb281.S: Fix ROMRAM startup. Minor cleanups.
* misc/redboot_ROM.ecm:
* misc/redboot_RAM.ecm: Update.
* include/pkgconf/mlt_powerpc_csb281_romram.mlt:
* include/pkgconf/mlt_powerpc_csb281_romram.ldi:
* include/pkgconf/mlt_powerpc_csb281_romram.h: Fix RAM size.
* src/hal_aux.c:
* include/plf_io.h: Define uncached, separately mapped, PCI space.
2003-01-02 Gary Thomas <gary@mlbassoc.com>
* src/hal_aux.c (hal_platform_init): Need to clear all interrupt
sources - very manually - reset doesn't do this.
* include/platform.inc: Don't run EOI cycle for spurious interrupts.
2002-12-24 Gary Thomas <gary@mlbassoc.com>
* src/redboot_linux_exec.c:
* src/hal_diag.c:
* src/hal_aux.c:
* src/csb281.S:
* misc/redboot_ROM.ecm:
* misc/redboot_RAM.ecm:
* include/pkgconf/mlt_powerpc_csb281_romram.mlt:
* include/pkgconf/mlt_powerpc_csb281_romram.ldi:
* include/pkgconf/mlt_powerpc_csb281_romram.h:
* include/pkgconf/mlt_powerpc_csb281_rom.mlt:
* include/pkgconf/mlt_powerpc_csb281_rom.ldi:
* include/pkgconf/mlt_powerpc_csb281_rom.h:
* include/pkgconf/mlt_powerpc_csb281_ram.mlt:
* include/pkgconf/mlt_powerpc_csb281_ram.ldi:
* include/pkgconf/mlt_powerpc_csb281_ram.h:
* include/plf_stub.h:
* include/plf_regs.h:
* include/plf_io.h:
* include/plf_intr.h:
* include/plf_cache.h:
* include/platform.inc:
* include/hal_diag.h:
* cdl/hal_powerpc_csb281.cdl: New package - HAL support
for Cogent CSB281 (PowerPC 8245) board.
//===========================================================================
// ####GPLCOPYRIGHTBEGIN####
// -------------------------------------------
// This file is part of eCos, the Embedded Configurable Operating System.
// Copyright (C) 1998, 1999, 2000, 2001, 2002 Free Software Foundation, Inc.
//
// This program is free software; you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation; either version 2 or (at your option) any
// later version.
//
// This program is distributed in the hope that it will be useful, but
// WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
// General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program; if not, write to the
// Free Software Foundation, Inc., 51 Franklin Street,
// Fifth Floor, Boston, MA 02110-1301, USA.
// -------------------------------------------
// ####GPLCOPYRIGHTEND####
//===========================================================================
Go to most recent revision | Compare with Previous | Blame | View Log