Subversion Repositories openrisc

# ====================================================================
#
#      hal_powerpc_cme555.cdl
#
#      PowerPC/cme555 board HAL package configuration data
#
# ====================================================================
## ####ECOSGPLCOPYRIGHTBEGIN####                                            
## -------------------------------------------                              
## This file is part of eCos, the Embedded Configurable Operating System.   
## Copyright (C) 1998, 1999, 2000, 2001, 2002 Free Software Foundation, Inc.
##
## eCos is free software; you can redistribute it and/or modify it under    
## the terms of the GNU General Public License as published by the Free     
## Software Foundation; either version 2 or (at your option) any later      
## version.                                                                 
##
## eCos is distributed in the hope that it will be useful, but WITHOUT      
## ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or    
## FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License    
## for more details.                                                        
##
## You should have received a copy of the GNU General Public License        
## along with eCos; if not, write to the Free Software Foundation, Inc.,    
## 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.            
##
## As a special exception, if other files instantiate templates or use      
## macros or inline functions from this file, or you compile this file      
## and link it with other works to produce a work based on this file,       
## this file does not by itself cause the resulting work to be covered by   
## the GNU General Public License. However the source code for this file    
## must still be made available in accordance with section (3) of the GNU   
## General Public License v2.                                               
##
## This exception does not invalidate any other reasons why a work based    
## on this file might be covered by the GNU General Public License.         
## -------------------------------------------                              
## ####ECOSGPLCOPYRIGHTEND####                                              
# ====================================================================
######DESCRIPTIONBEGIN####
#
# Author(s):      Bob Koninckx
# Original data:  bartv
# Contributors:
# Date:           1999-11-02
#
#####DESCRIPTIONEND####
#
# ====================================================================

cdl_package CYGPKG_HAL_POWERPC_EC555 {
    display       "EC555 MPC555 development board"
    parent        CYGPKG_HAL_POWERPC
    requires      CYGPKG_HAL_POWERPC_MPC5xx
    define_header hal_powerpc_ec555.h
    include_dir   cyg/hal
    description   "
        The EC555 HAL package provides the support needed to run
        eCos on an EC555 development board from Wuerz elektronik."

    compile       hal_diag.c plf_misc.c ec555.S plf_stub.c

    implements    CYGINT_HAL_DEBUG_GDB_STUBS
    implements    CYGINT_HAL_DEBUG_GDB_STUBS_BREAK
    implements    CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT
    implements    CYGINT_HAL_VIRTUAL_VECTOR_COMM_BAUD_SUPPORT

    define_proc {
        puts $::cdl_system_header "#define CYGBLD_HAL_TARGET_H   <pkgconf/hal_powerpc_mpc5xx.h>"
        puts $::cdl_system_header "#define CYGBLD_HAL_PLATFORM_H <pkgconf/hal_powerpc_ec555.h>"
    }

    cdl_component CYG_HAL_STARTUP {
        display       "Startup type"
        flavor        data
        legal_values  {"RAM" "ROM"}
        default_value {"RAM"}
        no_define
        define -file system.h CYG_HAL_STARTUP
        description   "
           When targetting the ec555 board it is possible to build
           the system for either RAM bootstrap or ROM bootstrap. RAM
           bootstrap generally requires that the board
           is equipped with ROMs containing a suitable ROM monitor or
           equivalent software that allows GDB to download the eCos
           application on to the board. The ROM bootstrap typically
           requires that the eCos application be blown into EPROMs or
           equivalent technology."
    }

        cdl_option CYGHWR_HAL_EC555_BOARD_VARIANT {
            display       "Board type"
                flavor        data
                legal_values  {"F02_S01" "F04_S02" "F08_S04" "F08_S08"}
                default_value {"F02_S01"}
                description   "
                   The ec555 board comes in four different flavours, 2MB flash-1MB RAM,
                   4MB flash-2MB RAM, 8MB flash-4MB RAM and 8MB flash-8MB RAM. This option
                   selects the board variant."
    }

    cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS {
        display      "Number of communication channels on the board"
        flavor       data
        calculated   2
        description      "
            Channel 0: Serial A, Channel 1: Serial B"
    }

    cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL {
        display          "Debug serial port"
        flavor data
        legal_values     0 to 1
        default_value    0
        description      "
           The ec555 board has two serial ports. This option
           chooses which port will be used to connect to a host
           running GDB."
    }

    cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL {
        display          "Diagnostic serial port"
        flavor data
        legal_values     0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
        default_value    1
        description      "
           The ec555 board has two serial ports.  This option
           chooses which port will be used for diagnostic output."
    }

    cdl_option CYGHWR_HAL_POWERPC_BOARD_SPEED {
        display          "Development board clock speed (MHz)"
        flavor           data
        default_value    40
        description      "
             The development boards is fitted with a 4MHz crystal. This frequency
             is internally boosted to maximum 40MHz. The value is fixed to the
             maximum."
    }

    cdl_option CYGHWR_HAL_POWERPC_FORCE_VECTOR_BASE_LOW {
        display          "Force vector base at address 0x0000 0000"
        flavor           bool
        calculated       1
        description      "
             The powerpc architecture allows the vectorbase to live at either
             0x0000 0000 or 0xfff0 0000. Since the CME-555 has no memory at the
             high addresses, vectors may never be located at 0xfff0 0000 for this
             board. They can be still be copied though if the internal flash is
             disabled and relocated to somewhere else"
    }

    cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_BAUD {
        display          "Baud rate for serial ports"
        flavor           data
        legal_values     300 600 1200 2400 4800 9600 14400 19200 28800 38400 57600 115200
        default_value    38400
        description      "
             This option determines the baud rate that will be used on both the console
             cannel and the debug channel."
    }

    # Real-time clock/counter specifics
    cdl_component CYGNUM_HAL_RTC_CONSTANTS {
        display       "Real-time clock constants."
        description   "
            Period is busclock/16/100."
        flavor        none
    
        cdl_option CYGNUM_HAL_RTC_NUMERATOR {
            display       "Real-time clock numerator"
            flavor        data
            default_value 1000000000
        }
        cdl_option CYGNUM_HAL_RTC_DENOMINATOR {
            display       "Real-time clock denominator"
            flavor        data
            default_value 100
        }
        cdl_option CYGNUM_HAL_RTC_PERIOD {
            display       "Real-time clock period"
            flavor        data
            default_value { (((CYGHWR_HAL_POWERPC_BOARD_SPEED*1000000)/16)/CYGNUM_HAL_RTC_DENOMINATOR) }
        }
    }

    cdl_component CYGBLD_GLOBAL_OPTIONS {
        display "Global build options"
        flavor  none
        parent  CYGPKG_NONE
        description   "
            Global build options including control over
            compiler flags, linker flags and choice of toolchain."


        cdl_option CYGBLD_GLOBAL_COMMAND_PREFIX {
            display "Global command prefix"
            flavor  data
            no_define
            default_value { "powerpc-eabi" }
            description "
                This option specifies the command prefix used when
                invoking the build tools."
        }

        cdl_option CYGBLD_GLOBAL_CFLAGS {
            display "Global compiler flags"
            flavor  data
            no_define
            default_value { CYGBLD_GLOBAL_WARNFLAGS . "-mcpu=505 -g -O2 -ffunction-sections -fdata-sections -mmultiple -fno-rtti -fno-exceptions " }
            description   "
                This option controls the global compiler flags which
                are used to compile all packages by
                default. Individual packages may define
                options which override these global flags."
        }

        cdl_option CYGBLD_GLOBAL_LDFLAGS {
            display "Global linker flags"
            flavor  data
            no_define
            default_value { "-mcpu=505 -g -nostdlib -Wl,--gc-sections -Wl,-static" }
            description   "
                This option controls the global linker flags. Individual
                packages may define options which override these global flags."
        }

        cdl_option CYGBLD_BUILD_GDB_STUBS {
            display "Build GDB stub ROM image"
            default_value 0
            requires { CYG_HAL_STARTUP == "ROM" }
            requires CYGSEM_HAL_ROM_MONITOR
            requires CYGBLD_BUILD_COMMON_GDB_STUBS
            requires CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
            requires CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
            requires CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
            requires ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
            requires ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
            no_define
            description "
                This option enables the building of the GDB stubs for the
                board. The common HAL controls takes care of most of the
                build process, but the final conversion from ELF image to
                binary data is handled by the platform CDL, allowing
                relocation of the data if necessary."

            make -priority 320 {
                <PREFIX>/bin/gdb_module.bin : <PREFIX>/bin/gdb_module.img
                $(OBJCOPY) -O binary $< $@
            }
        }
    }

    cdl_component CYGHWR_MEMORY_LAYOUT {
        display "Memory layout"
        flavor data
        no_define
        calculated { CYG_HAL_STARTUP == "RAM" ? "powerpc_ec555_ram" : \
                                                "powerpc_ec555_rom" }

        cdl_option CYGHWR_MEMORY_LAYOUT_LDI {
            display "Memory layout linker script fragment"
            flavor data
            no_define
            define -file system.h CYGHWR_MEMORY_LAYOUT_LDI
                        calculated { CYG_HAL_STARTUP == "RAM" ? \
                           CYGHWR_HAL_EC555_BOARD_VARIANT == "F02_S01" ? "<pkgconf/mlt_powerpc_ec555_f02_s01_ram.ldi>" : \
                           CYGHWR_HAL_EC555_BOARD_VARIANT == "F04_S02" ? "<pkgconf/mlt_powerpc_ec555_f04_s02_ram.ldi>" : \
                           CYGHWR_HAL_EC555_BOARD_VARIANT == "F08_S04" ? "<pkgconf/mlt_powerpc_ec555_f08_s04_ram.ldi>" : \
                                                                                                 "<pkgconf/mlt_powerpc_ec555_f08_s08_ram.ldi>" : \
                           CYGHWR_HAL_EC555_BOARD_VARIANT == "F02_S01" ? "<pkgconf/mlt_powerpc_ec555_f02_s01_rom.ldi>" : \
                           CYGHWR_HAL_EC555_BOARD_VARIANT == "F04_S02" ? "<pkgconf/mlt_powerpc_ec555_f04_s02_rom.ldi>" : \
                           CYGHWR_HAL_EC555_BOARD_VARIANT == "F08_S04" ? "<pkgconf/mlt_powerpc_ec555_f08_s04_rom.ldi>" : \
                                                                         "<pkgconf/mlt_powerpc_ec555_f08_s08_rom.ldi>"
            }
        }

        cdl_option CYGHWR_MEMORY_LAYOUT_H {
            display "Memory layout header file"
            flavor data
            no_define
            define -file system.h CYGHWR_MEMORY_LAYOUT_H
                        calculated { CYG_HAL_STARTUP == "RAM" ? \
                                       CYGHWR_HAL_EC555_BOARD_VARIANT == "F02_S01" ? "<pkgconf/mlt_powerpc_ec555_f02_s01_ram.h>" : \
                               CYGHWR_HAL_EC555_BOARD_VARIANT == "F04_S02" ? "<pkgconf/mlt_powerpc_ec555_f04_s02_ram.h>" : \
                           CYGHWR_HAL_EC555_BOARD_VARIANT == "F08_S04" ? "<pkgconf/mlt_powerpc_ec555_f08_s04_ram.h>" : \
                                                                         "<pkgconf/mlt_powerpc_ec555_f08_s08_ram.h>" : \
                           CYGHWR_HAL_EC555_BOARD_VARIANT == "F02_S01" ? "<pkgconf/mlt_powerpc_ec555_f02_s01_rom.h>" : \
                               CYGHWR_HAL_EC555_BOARD_VARIANT == "F04_S02" ? "<pkgconf/mlt_powerpc_ec555_f04_s02_rom.h>" : \
                               CYGHWR_HAL_EC555_BOARD_VARIANT == "F08_S04" ? "<pkgconf/mlt_powerpc_ec555_f08_s04_rom.h>" : \
                                                                         "<pkgconf/mlt_powerpc_ec555_f08_s08_rom.h>"
            }
        }
    }

    cdl_option CYGSEM_HAL_ROM_MONITOR {
        display       "Behave as a ROM monitor"
        flavor        bool
        default_value 0
        parent        CYGPKG_HAL_ROM_MONITOR
        requires      { CYG_HAL_STARTUP == "ROM" }
        description   "
            Enable this option if this program is to be used as a ROM monitor,
            i.e. applications will be loaded into RAM on the board, and this
            ROM monitor may process exceptions or interrupts generated from the
            application. This enables features such as utilizing a separate
            interrupt stack when exceptions are generated."
    }
}