URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [rtos/] [ecos-3.0/] [packages/] [hal/] [powerpc/] [moab/] [current/] [ChangeLog] - Rev 786
Compare with Previous | Blame | View Log
2011-07-22 Sergei Gavrikov <sergei.gavrikov@gmail.com>
* misc/moab1.1_redboot_BOOT.ecm:
* misc/moab1.1_redboot_RAMF.ecm:
* misc/moab1.1_redboot_ROMRAM.ecm:
* misc/redboot_BOOT.ecm:
* misc/redboot_RAM.ecm:
* misc/redboot_RAM+FLASH.ecm:
* misc/redboot_ROMRAM.ecm:
Update due renaming CYGHWR_DEVS_ETH_PHY_DP83847 to
CYGHWR_DEVS_ETH_PHY_DP8384X. [ Bugzilla 1001235 ]
2009-01-31 Bart Veer <bartv@ecoscentric.com>
* cdl/hal_powerpc_moab.cdl: update compiler flags for gcc 4.x
2008-11-07 Jonathan Larmour <jifl@eCosCentric.com>
* include/pkgconf/mlt_powerpc_moab_ram.ldi:
* include/pkgconf/mlt_powerpc_moab_rom.ldi:
* include/pkgconf/mlt_powerpc_moab_romram.ldi:
Add SECTION_eh_frame and SECTION_RELOCS.
2005-02-03 Gary Thomas <gary@mlbassoc.com>
* src/moab.S: Rework startup sequence - faster and works better
on all boards (including some that wouldn't come up at all).
2004-09-19 Gary Thomas <gary@mlbassoc.com>
* src/hal_aux.c (cyg_plf_redboot_startup): Boot mode implies no
script, even if the user has set one.
2004-08-24 Gary Thomas <gary@mlbassoc.com>
* src/moab.S:
* sa_tests/tty.c:
* sa_tests/start.S:
* include/pkgconf/mlt_powerpc_moab_romram.h:
* cdl/hal_powerpc_moab.cdl: Support for new board revision. Minor
layout changes, change in RAM/FLASH sizes.
2004-02-26 Gary Thomas <gary@mlbassoc.com>
* misc/redboot_BOOT.ecm:
* cdl/hal_powerpc_moab.cdl: Use HAL_PLATFORM_EXTRA to display operating
mode of RedBoot (BOOT, NAND FLASH or RAM)
2004-02-25 Gary Thomas <gary@mlbassoc.com>
* misc/redboot_RAM+FLASH.ecm: Remove FIS - can't be supported in
this configuration.
2003-12-08 Gary Thomas <gary@mlbassoc.com>
* src/moab.S: Fix cycle time on NAND FLASH.
2003-10-15 Gary Thomas <gary@mlbassoc.com>
* cdl/hal_powerpc_moab.cdl: Remove [unused] tests so "make tests" works.
2003-10-09 Gary Thomas <gary@mlbassoc.com>
* include/plf.inc: Define vector 0, to make ROMRAM mode program startup
safer (don't need to remember the "-e XXX" option)
2003-10-03 Gary Thomas <gary@mlbassoc.com>
* src/hal_aux.c (hal_platform_init): Better/different ESA computation,
using only 16 unique bits.
2003-10-02 Gary Thomas <gary@mlbassoc.com>
* src/hal_aux.c:
* cdl/hal_powerpc_moab.cdl: Add code to set and check ethernet station
addresses, based on CPU serial number. Force RedBoot to validate them.
2003-09-30 Gary Thomas <gary@mlbassoc.com>
* include/plf_io.h (CYGARC_VIRTUAL_ADDRESS): Added.
Scan all possible PCI slots.
2003-09-28 Gary Thomas <gary@mlbassoc.com>
* cdl/hal_powerpc_moab.cdl: Remove conflicting constraint - prevented
non-RedBoot builds.
2003-09-26 Gary Thomas <gary@mlbassoc.com>
* include/plf_io.h: PCI IRQ mapping is platform dependent - moved here.
2003-09-24 Gary Thomas <gary@mlbassoc.com>
* src/moab.S: Disable GPIO16 (watchdog timer) as output by default.
2003-09-22 Gary Thomas <gary@mlbassoc.com>
* cdl/hal_powerpc_moab.cdl: Need to force 'fconfig' since that is now
optional in RedBoot.
2003-09-21 Gary Thomas <gary@mlbassoc.com>
* misc/redboot_BOOT.ecm:
* misc/redboot_RAM+FLASH.ecm:
* misc/redboot_RAM.ecm:
* misc/redboot_ROM.ecm:
* misc/redboot_ROMRAM.ecm: Adjust for changes in RedBoot
template - DNS now must be enabled manually.
2003-09-20 Gary Thomas <gary@mlbassoc.com>
* misc/redboot_BOOT.ecm: Disable PCI in BOOT configuration
* include/plf_io.h: Fix PCI I/O addresses
* src/moab_ide.c:
* cdl/hal_powerpc_moab.cdl: Add IDE support
2003-09-19 Gary Thomas <gary@mlbassoc.com>
* support/make_MOAB_flash.c: Tool to create boot flash image
* sa_tests/tty.c:
* sa_tests/start.S:
* sa_tests/sdram_test.c:
* sa_tests/ppc_ocm.ld:
* sa_tests/ppc_dram.ld:
* sa_tests/ppc.inc:
* sa_tests/flash_test.c:
* sa_tests/Makefile: Stand alone testing support.
* misc/redboot_ROMRAM.ecm:
* misc/redboot_ROM.ecm:
* misc/redboot_BOOT.ecm:
* misc/redboot_RAM+FLASH.ecm:
* misc/redboot_RAM.ecm: Default RedBoot configurations
* src/moab.S:
* src/hal_aux.c:
* src/plf_redboot_linux_exec.c:
* include/pkgconf/mlt_powerpc_moab_romram.mlt:
* include/pkgconf/mlt_powerpc_moab_romram.ldi:
* include/pkgconf/mlt_powerpc_moab_romram.h:
* include/pkgconf/mlt_powerpc_moab_rom.mlt:
* include/pkgconf/mlt_powerpc_moab_rom.ldi:
* include/pkgconf/mlt_powerpc_moab_rom.h:
* include/pkgconf/mlt_powerpc_moab_ram.mlt:
* include/pkgconf/mlt_powerpc_moab_ram.ldi:
* include/pkgconf/mlt_powerpc_moab_ram.h:
* include/plf_stub.h:
* include/plf_regs.h:
* include/plf_io.h:
* include/plf_intr.h:
* include/plf_cache.h:
* include/plf.inc:
* include/hal_diag.h:
* cdl/hal_powerpc_moab.cdl: New package - platform support for
TAMS MOAB (PowerPC 405GPr) board.
//===========================================================================
// ####GPLCOPYRIGHTBEGIN####
// -------------------------------------------
// This file is part of eCos, the Embedded Configurable Operating System.
// Copyright (C) 1998, 1999, 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
//
// This program is free software; you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation; either version 2 or (at your option) any
// later version.
//
// This program is distributed in the hope that it will be useful, but
// WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
// General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program; if not, write to the
// Free Software Foundation, Inc., 51 Franklin Street,
// Fifth Floor, Boston, MA 02110-1301, USA.
// -------------------------------------------
// ####GPLCOPYRIGHTEND####
//===========================================================================