Subversion Repositories openrisc

//==========================================================================
//
//      var_intr.c
//
//      PowerPC variant interrupt handlers
//
//==========================================================================
// ####ECOSGPLCOPYRIGHTBEGIN####                                            
// -------------------------------------------                              
// This file is part of eCos, the Embedded Configurable Operating System.   
// Copyright (C) 1998, 1999, 2000, 2001, 2002 Free Software Foundation, Inc.
//
// eCos is free software; you can redistribute it and/or modify it under    
// the terms of the GNU General Public License as published by the Free     
// Software Foundation; either version 2 or (at your option) any later      
// version.                                                                 
//
// eCos is distributed in the hope that it will be useful, but WITHOUT      
// ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or    
// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License    
// for more details.                                                        
//
// You should have received a copy of the GNU General Public License        
// along with eCos; if not, write to the Free Software Foundation, Inc.,    
// 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.            
//
// As a special exception, if other files instantiate templates or use      
// macros or inline functions from this file, or you compile this file      
// and link it with other works to produce a work based on this file,       
// this file does not by itself cause the resulting work to be covered by   
// the GNU General Public License. However the source code for this file    
// must still be made available in accordance with section (3) of the GNU   
// General Public License v2.                                               
//
// This exception does not invalidate any other reasons why a work based    
// on this file might be covered by the GNU General Public License.         
// -------------------------------------------                              
// ####ECOSGPLCOPYRIGHTEND####                                              
//==========================================================================
//#####DESCRIPTIONBEGIN####
//
// Author(s):    Bob Koninckx
// Contributors: Bob Koninckx
// Date:         2001-12-16
// Purpose:      PowerPC variant interrupt handlers
// Description:  This file contains code to handle interrupt related issues
//               on the PowerPC variant.
//
//####DESCRIPTIONEND####
//
//==========================================================================
 
#include <pkgconf/hal.h>
#include <cyg/hal/ppc_regs.h>
#include <cyg/hal/hal_arbiter.h>
 
//~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
// Since the interrupt sources do not have fixed vectors on the 5XX
// SIU, some arbitration is required.
 
// More than one interrupt source can be programmed to use the same
// vector, so all sources on the same vector have to be queried to
// find the one raising the interrupt. This functionality has not been
// implemented, but the arbiter functions for each of the SIU
// interrupt sources can be called in sequence without change.
 
 
 
// Timebase interrupt can be caused by match on either reference A
// or B.  
// Note: If only one interrupt source is assigned per vector, and only
// reference interrupt A or B is used, this ISR is not
// necessary. Attach the timerbase reference A or B ISR directly to
// the LVLx vector instead.
externC cyg_uint32
hal_arbitration_isr_tb (CYG_ADDRWORD vector, CYG_ADDRWORD data)
{
    cyg_uint32 isr_ret;
    cyg_uint16 tbscr;
 
    HAL_READ_UINT16 (CYGARC_REG_IMM_TBSCR, tbscr);
    if (tbscr & CYGARC_REG_IMM_TBSCR_REFA) {
        isr_ret = hal_call_isr (CYGNUM_HAL_INTERRUPT_SIU_TB_A);
#ifdef CYGIMP_HAL_COMMON_INTERRUPTS_CHAIN
        if (isr_ret & CYG_ISR_HANDLED)
#endif
            return isr_ret;
    }
 
    if (tbscr & CYGARC_REG_IMM_TBSCR_REFB) {
        isr_ret = hal_call_isr (CYGNUM_HAL_INTERRUPT_SIU_TB_B);
#ifdef CYGIMP_HAL_COMMON_INTERRUPTS_CHAIN
        if (isr_ret & CYG_ISR_HANDLED)
#endif
            return isr_ret;
    }
 
    return 0;
}
 
// Periodic interrupt.
// Note: If only one interrupt source is assigned per vector, this ISR
// is not necessary. Attach the periodic interrupt ISR directly to the
// LVLx vector instead.
externC cyg_uint32
hal_arbitration_isr_pit (CYG_ADDRWORD vector, CYG_ADDRWORD data)
{
    cyg_uint32 isr_ret;
    cyg_uint16 piscr;
 
    HAL_READ_UINT16 (CYGARC_REG_IMM_PISCR, piscr);
    if (piscr & CYGARC_REG_IMM_PISCR_PS) {
        isr_ret = hal_call_isr (CYGNUM_HAL_INTERRUPT_SIU_PIT);
#ifdef CYGIMP_HAL_COMMON_INTERRUPTS_CHAIN
        if (isr_ret & CYG_ISR_HANDLED)
#endif
            return isr_ret;
    }
 
    return 0;
}
 
// Real time clock interrupts can be caused by the alarm or
// once-per-second.
// Note: If only one interrupt source is assigned per vector, and only
// the alarm or once-per-second interrupt is used, this ISR is not
// necessary. Attach the alarm or once-per-second ISR directly to the
// LVLx vector instead.
externC cyg_uint32
hal_arbitration_isr_rtc (CYG_ADDRWORD vector, CYG_ADDRWORD data)
{
    cyg_uint32 isr_ret;
    cyg_uint16 rtcsc;
 
    HAL_READ_UINT16 (CYGARC_REG_IMM_RTCSC, rtcsc);
    if (rtcsc & CYGARC_REG_IMM_RTCSC_SEC) {
        isr_ret = hal_call_isr (CYGNUM_HAL_INTERRUPT_SIU_RTC_SEC);
#ifdef CYGIMP_HAL_COMMON_INTERRUPTS_CHAIN
        if (isr_ret & CYG_ISR_HANDLED)
#endif
            return isr_ret;
    }
 
    if (rtcsc & CYGARC_REG_IMM_RTCSC_ALR) {
        isr_ret = hal_call_isr (CYGNUM_HAL_INTERRUPT_SIU_RTC_ALR);
#ifdef CYGIMP_HAL_COMMON_INTERRUPTS_CHAIN
        if (isr_ret & CYG_ISR_HANDLED)
#endif
            return isr_ret;
    }
 
    return 0;
}
 
// Default arbitration ISR for serial interrupts. Although such arbitration
// belongs in the serial device driver, we require this default implementation
// for CTRL-C interrupts to be delivered correctly to any running ROM monitor.
// A device driver that uses more than just receive interrupts may of course
// provide its own arbiter.
externC cyg_uint32
hal_arbitration_isr_sci(CYG_ADDRWORD vector, CYG_ADDRWORD data)
{
    cyg_uint32 isr_ret;
	cyg_uint16 scc_sr;
	cyg_uint16 scc_cr;
 
	// Try SCI0
	HAL_READ_UINT16(CYGARC_REG_IMM_SC1SR, scc_sr);
	HAL_READ_UINT16(CYGARC_REG_IMM_SCC1R1, scc_cr);
	if ((scc_sr & CYGARC_REG_IMM_SCxSR_RDRF) && (scc_cr & CYGARC_REG_IMM_SCCxR1_RIE)) {
	    isr_ret = hal_call_isr(CYGNUM_HAL_INTERRUPT_IMB3_SCI1_RX);
#ifdef CYGIMP_HAL_COMMON_INTERRUPTS_CHAIN
        if (isr_ret & CYG_ISR_HANDLED)
#endif
		   return isr_ret;
	}
 
	HAL_READ_UINT16(CYGARC_REG_IMM_SC2SR, scc_sr);
	HAL_READ_UINT16(CYGARC_REG_IMM_SCC2R1, scc_cr);
	if ((scc_sr & CYGARC_REG_IMM_SCxSR_RDRF) && (scc_cr & CYGARC_REG_IMM_SCCxR1_RIE)) {
	    isr_ret = hal_call_isr(CYGNUM_HAL_INTERRUPT_IMB3_SCI2_RX);
#ifdef CYGIMP_HAL_COMMON_INTERRUPTS_CHAIN
        if (isr_ret & CYG_ISR_HANDLED)
#endif
			return isr_ret;
	}
 
	return 0;
}
 
// -------------------------------------------------------------------------
// IMB3 interrupt decoding
//
// All interrupt priorities higher than 7 are mapped to SIU level 7. As much
// as 15 interrupting devices can be behind this. If more than one IMB3 
// device is to be used with priorites in the range 7-31, a special kind of
// arbitration isr needs to be set up on SIU level 7. As this is not allways
// necessary, it is provided as a configuration option.
#ifdef CYGSEM_HAL_POWERPC_MPC5XX_IMB3_ARBITER
static hal_mpc5xx_arbitration_data * imb3_data_head = 0;
 
static cyg_uint32
hal_arbitration_imb3(CYG_ADDRWORD vector, CYG_ADDRWORD data)
{
  hal_mpc5xx_arbitration_data * p = 
    *(hal_mpc5xx_arbitration_data **)data;
 
  // Try them all, highest priorities come first. An ISR should return
  // CYG_ISR_HANDLED or CYG_ISR_CALL_DSR. An arbitration ISR will 
  // strip the CYG_DSR_HANDLED from the ISR result, or returns 0 if
  // no ISR could be called. This means that CYG_ISR_HANDLED implies
  // that an ISR was called, 0 means that nothing was called.
  // Notice that our approach tries to be efficient. We return as soon
  // as the first interrupting source is found. This prevents from scanning 
  // the complete table for every interrupt. If more than one module 
  // requested at the same time, we will re-enter this procedure immediately
  // anyway.
  while(p)
  {
    if((p->arbiter(CYGNUM_HAL_INTERRUPT_SIU_LVL7, p->data))&CYG_ISR_HANDLED)
      break;
    else
      p = (hal_mpc5xx_arbitration_data *)(p->reserved);
  }
 
  return 0;
}
 
static hal_mpc5xx_arbitration_data *
mpc5xx_insert(hal_mpc5xx_arbitration_data * list,
              hal_mpc5xx_arbitration_data * data)
{
  hal_mpc5xx_arbitration_data    tmp;
  hal_mpc5xx_arbitration_data * ptmp = &tmp;
  tmp.reserved = list;
 
  while(ptmp->reserved)
  {
    if(((hal_mpc5xx_arbitration_data *)(ptmp->reserved))->priority > data->priority)
      break;
    ptmp = (hal_mpc5xx_arbitration_data *)(ptmp->reserved);
  }
 
  data->reserved = ptmp->reserved;
  ptmp->reserved = data;
 
  return (hal_mpc5xx_arbitration_data *)(tmp.reserved);
}
 
// This returns either the removed object or NULL if the priority
// was not found in the list.
// If a valid pointer is returned, the new start of the list is chained to it.
static hal_mpc5xx_arbitration_data *
mpc5xx_remove(hal_mpc5xx_arbitration_data * list,
              cyg_uint32 apriority)
{
  hal_mpc5xx_arbitration_data   tmp;
  hal_mpc5xx_arbitration_data * result = 0;
  hal_mpc5xx_arbitration_data * ptmp = &tmp;
  tmp.reserved = list;
 
  while(ptmp->reserved)
  {
    if(((hal_mpc5xx_arbitration_data *)(ptmp->reserved))->priority == apriority)
      break;
 
	// move on
    ptmp = (hal_mpc5xx_arbitration_data *)(ptmp->reserved);
  }
 
  // When we come here, ptmp is either chained to NULL or to the one we were looking for.
  if(ptmp->reserved)
  { // remove it
	result = (hal_mpc5xx_arbitration_data *)(ptmp->reserved);
	result->reserved = tmp.reserved;
 
    ptmp->reserved = ((hal_mpc5xx_arbitration_data *)(ptmp->reserved))->reserved;
  }
 
  return result;
}
#endif
 
externC void 
hal_mpc5xx_install_arbitration_isr(hal_mpc5xx_arbitration_data * adata)
{ // Find the SIU vector from the priority
  CYG_ADDRWORD vector = 2*(1 + adata->priority);
 
  if(vector < CYGNUM_HAL_INTERRUPT_SIU_LVL7)
  { // Store adata in the objects table
    HAL_INTERRUPT_ATTACH(vector, adata->arbiter, adata->data, adata);
    HAL_INTERRUPT_UNMASK(vector);
  }
  else
  {
#ifdef CYGSEM_HAL_POWERPC_MPC5XX_IMB3_ARBITER  
    // Prevent anything from coming through while manipulating
    // the list
    HAL_INTERRUPT_MASK(CYGNUM_HAL_INTERRUPT_SIU_LVL7);
    imb3_data_head = mpc5xx_insert(imb3_data_head, adata);
    HAL_INTERRUPT_UNMASK(CYGNUM_HAL_INTERRUPT_SIU_LVL7);
#else
    HAL_INTERRUPT_ATTACH(CYGNUM_HAL_INTERRUPT_SIU_LVL7, adata->arbiter, adata->data, adata);
    HAL_INTERRUPT_UNMASK(CYGNUM_HAL_INTERRUPT_SIU_LVL7);
#endif
  }
}
 
externC hal_mpc5xx_arbitration_data *
hal_mpc5xx_remove_arbitration_isr(cyg_uint32 apriority)
{
  hal_mpc5xx_arbitration_data * result = 0;
 
  // Find the SIU vector from the priority
  CYG_ADDRWORD vector = 2*(1 + apriority);
  if(vector < CYGNUM_HAL_INTERRUPT_SIU_LVL7)
  {
    result = (hal_mpc5xx_arbitration_data *)(hal_interrupt_objects[vector]);
	HAL_INTERRUPT_DETACH(vector, hal_interrupt_handlers[vector]);
  }
  else
  {
#ifdef CYGSEM_HAL_POWERPC_MPC5XX_IMB3_ARBITER  
    // Prevent anything from coming through while manipulating the list
    HAL_INTERRUPT_MASK(CYGNUM_HAL_INTERRUPT_SIU_LVL7);
	result = mpc5xx_remove(imb3_data_head, apriority);
 
	// If something was removed, update the list.
	if(result) imb3_data_head = result->reserved;
    HAL_INTERRUPT_UNMASK(CYGNUM_HAL_INTERRUPT_SIU_LVL7);
#else
    result = (hal_mpc5xx_arbitration_data *)(hal_interrupt_objects[CYGNUM_HAL_INTERRUPT_SIU_LVL7]);
	HAL_INTERRUPT_DETACH(CYGNUM_HAL_INTERRUPT_SIU_LVL7, hal_interrupt_handlers[CYGNUM_HAL_INTERRUPT_SIU_LVL7]); 
#endif
  }
 
  return result;
}
 
// -------------------------------------------------------------------------
// Variant specific interrupt setup
#if defined(CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT) \
     || defined(CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT)
static hal_mpc5xx_arbitration_data sci_arbiter;
#endif
 
externC void
hal_variant_IRQ_init(void)
{
  // Mask off everything. This guarantees that we can safely install a handler on the decrementer
  // later on
  HAL_INTERRUPT_MASK(CYGNUM_HAL_INTERRUPT_SIU_IRQ0);
  HAL_INTERRUPT_MASK(CYGNUM_HAL_INTERRUPT_SIU_IRQ1);
  HAL_INTERRUPT_MASK(CYGNUM_HAL_INTERRUPT_SIU_IRQ2);
  HAL_INTERRUPT_MASK(CYGNUM_HAL_INTERRUPT_SIU_IRQ3);
  HAL_INTERRUPT_MASK(CYGNUM_HAL_INTERRUPT_SIU_IRQ4);
  HAL_INTERRUPT_MASK(CYGNUM_HAL_INTERRUPT_SIU_IRQ5);
  HAL_INTERRUPT_MASK(CYGNUM_HAL_INTERRUPT_SIU_IRQ6);
  HAL_INTERRUPT_MASK(CYGNUM_HAL_INTERRUPT_SIU_IRQ7);
  HAL_INTERRUPT_MASK(CYGNUM_HAL_INTERRUPT_SIU_LVL0);
  HAL_INTERRUPT_MASK(CYGNUM_HAL_INTERRUPT_SIU_LVL1);
  HAL_INTERRUPT_MASK(CYGNUM_HAL_INTERRUPT_SIU_LVL2);
  HAL_INTERRUPT_MASK(CYGNUM_HAL_INTERRUPT_SIU_LVL3);
  HAL_INTERRUPT_MASK(CYGNUM_HAL_INTERRUPT_SIU_LVL4);
  HAL_INTERRUPT_MASK(CYGNUM_HAL_INTERRUPT_SIU_LVL5);
  HAL_INTERRUPT_MASK(CYGNUM_HAL_INTERRUPT_SIU_LVL6);
  HAL_INTERRUPT_MASK(CYGNUM_HAL_INTERRUPT_SIU_LVL7);
 
#ifdef CYGSEM_HAL_POWERPC_MPC5XX_IMB3_ARBITER  
  HAL_INTERRUPT_ATTACH(CYGNUM_HAL_INTERRUPT_SIU_LVL7, hal_arbitration_imb3, &imb3_data_head, 0);
  HAL_INTERRUPT_UNMASK(CYGNUM_HAL_INTERRUPT_SIU_LVL7);
#endif
 
#if defined(CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT) \
     || defined(CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT)
  // GDB-CTRLC
  // Install a default arbiter for serial interrupts. This allows
  // to make a boot monitor simply turn on the required Rx interrupt
  // and still be delivered the necessary default isr. Without this,
  // redboot would be informed of a level interrupt on the SIU instead
  // of the Rx interrupt that really happened.
  // Make sure the interrupts are set up on the correct level
  sci_arbiter.priority = CYGNUM_HAL_ISR_SOURCE_PRIORITY_QSCI;
  sci_arbiter.data    = 0;
  sci_arbiter.arbiter = hal_arbitration_isr_sci;
 
  hal_mpc5xx_install_arbitration_isr(&sci_arbiter);
  HAL_INTERRUPT_SET_LEVEL(CYGNUM_HAL_INTERRUPT_IMB3_SCI1_RX, CYGNUM_HAL_ISR_SOURCE_PRIORITY_QSCI);	
  HAL_INTERRUPT_SET_LEVEL(CYGNUM_HAL_INTERRUPT_IMB3_SCI2_RX, CYGNUM_HAL_ISR_SOURCE_PRIORITY_QSCI);	
#endif
}
 
// -------------------------------------------------------------------------
// EOF var_intr.c