URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [rtos/] [ecos-3.0/] [packages/] [hal/] [powerpc/] [viper/] [current/] [ChangeLog] - Rev 811
Go to most recent revision | Compare with Previous | Blame | View Log
2009-01-31 Bart Veer <bartv@ecoscentric.com>
* cdl/hal_powerpc_viper.cdl: update compiler flags for gcc 4.x
2004-09-30 John Dallaway <jld@ecoscentric.com>
* cdl/hal_powerpc_viper.cdl: Clean up of CDL strings.
2004-09-28 Jonathan Larmour <jifl@eCosCentric.com>
* include/pkgconf/mlt_powerpc_viper_romram.ldi: Include relocs and
.eh_frame sections.
* include/pkgconf/mlt_powerpc_viper_rom.ldi: Ditto.
* include/pkgconf/mlt_powerpc_viper_ram.ldi: Ditto.
* include/pkgconf/mlt_powerpc_viper_romram.mlt: Delete. Out of date and
unmaintained.
* include/pkgconf/mlt_powerpc_viper_rom.mlt: Ditto.
* include/pkgconf/mlt_powerpc_viper_ram.mlt: Ditto.
2003-12-21 Gary Thomas <gary@mlbassoc.com>
* src/viper.S: Only clear caches on non-RAM startup. This is to
help solve a problem with network debug connections. It seems
that messing with the caches during startup confuses the CPM.
* misc/viper2_862P.ecm: New file, used to describe a Viper with
a PPC862P processor (very rare)
2003-12-08 Gary Thomas <gary@mlbassoc.com>
* cdl/hal_powerpc_viper.cdl:
HAL_PLATFORM_CPU now defined by MPC8xx variant CDL.
2003-10-06 Gary Thomas <gary@mlbassoc.com>
* misc/viper2_866T.ecm:
* misc/viper2_860T.ecm: New file(s) describing new board variants.
2003-09-21 Gary Thomas <gary@mlbassoc.com>
* misc/redboot_ROMRAM.ecm: Adjust for changes in RedBoot
template - DNS now must be enabled manually.
2003-08-28 Gary Thomas <gary@mlbassoc.com>
* src/redboot_linux_exec.c: Obsolete file - removed.
* src/plf_redboot_linux_exec.c: New file - platform specifics
for booting Linux kernel from RedBoot.
* cdl/hal_powerpc_viper.cdl: Linux booting from RedBoot is
now supported at the architecture level. Changes to support
architecture/platform layering.
2003-08-19 Gary Thomas <gary@mlbassoc.com>
* src/viper.S:
* cdl/hal_powerpc_viper.cdl: Support new model Viper which
has slightly different layout and 16bit FLASH (instead of 8bit)
2003-07-18 Nick Garnett <nickg@balti.calivar.com>
* cdl/hal_powerpc_viper.cdl:
Changed values for CYGNUM_HAL_RTC_NUMERATOR,
CYGNUM_HAL_RTC_DENOMINATOR and CYGNUM_HAL_RTC_PERIOD to
"default_value" from "calculated". This makes it easier
to change these values globally.
2003-03-23 Gary Thomas <gary@mlbassoc.com>
* cdl/hal_powerpc_viper.cdl: New CDL for setting processor type.
2003-03-11 Mark Salter <msalter@redhat.com>
* src/redboot_linux_exec.c (do_exec): Call eth_drv_stop as necessary.
2003-03-07 Gary Thomas <gary@mlbassoc.com>
* include/plf_stub.h: Remove superfluous include <pkgconf/hal_powerpc_viper.h>
2003-03-04 Gary Thomas <gary@mlbassoc.com>
* src/viper.S:
* cdl/hal_powerpc_viper.cdl: Support higher speed parts - up to 100MHz.
2002-12-02 Gary Thomas <gthomas@ecoscentric.com>
* include/plf_intr.h: Use MPC8xx variant RESET support.
2002-11-26 Gary Thomas <gthomas@ecoscentric.com>
* cdl/hal_powerpc_viper.cdl: Move platform define to platform package.
2002-11-25 Gary Thomas <gthomas@ecoscentric.com>
* src/viper.S: Minor include file cleanups.
* cdl/hal_powerpc_viper.cdl: Update port layout CDL.
2002-10-18 Gary Thomas <gthomas@ecoscentric.com>
* include/plf_cache.h: No need for old FLASH cache support.
* src/hal_diag.c:
* include/hal_diag.h: Remove old !VIRTUAL_VECTOR cruft.
2002-09-02 Gary Thomas <gthomas@ecoscentric.com>
* cdl/hal_powerpc_viper.cdl: Fix descriptions for serial ports
since both SMC1 and SCC1 are now supported.
2002-08-02 Andrew Lunn <Andrew.Lunn@ascom.ch>
* cdl/hal_powerpc_viper.cdl: the RedBoot exec command can now
be disabled by CDL
2002-07-31 Gary Thomas <gary@chez-thomas.org>
* misc/redboot_ROMRAM.ecm:
* cdl/hal_powerpc_viper.cdl: Default board speed is now 63MHz.
2002-07-24 Gary Thomas <gary@chez-thomas.org>
* src/viper.S:
* cdl/hal_powerpc_viper.cdl: More choices for system clock.
2002-07-22 Gary Thomas <gary@chez-thomas.org>
* src/viper.S:
* cdl/hal_powerpc_viper.cdl:
Support choices of 47.9, 51.6 MHz for the system clock.
2002-07-18 Gary Thomas <gary@chez-thomas.org>
* src/viper.S: Increase power-up delay before starting SDRAM.
2002-07-11 Gary Thomas <gary@chez-thomas.org>
* cdl/hal_powerpc_viper.cdl: Add SCC1 as a serial console port.
2002-06-27 Gary Thomas <gary@chez-thomas.org>
* include/plf_regs.h: New file - platform overrides.
2002-06-25 Gary Thomas <gary@chez-thomas.org>
* src/redboot_linux_exec.c:
* cdl/hal_powerpc_viper.cdl: Add Linux boot (exec) command.
2002-06-24 Gary Thomas <gary@chez-thomas.org>
* misc/redboot_ROMRAM.ecm: Update for new FLASH chips.
2002-06-20 Gary Thomas <gary@chez-thomas.org>
* src/viper.S:
* src/hal_aux.c: Support up to 8M of FLASH space.
2002-05-30 John Dallaway <jld@redhat.com>
* include/pkgconf/mlt*: Regenerated memory layout files.
2002-04-30 Nick Garnett <nickg@redhat.com>
* src/viper.S: Changed boot ROM wait states from 4 to 7.
2002-04-16 Gary Thomas <gthomas@redhat.com>
* misc/redboot_ROMRAM.ecm:
RedBoot now requires 0x30000 in this configuration.
2002-04-11 Gary Thomas <gthomas@redhat.com>
* include/plf_cache.h: Use common CDL for cache control.
2002-04-10 Gary Thomas <gthomas@redhat.com>
* src/hal_aux.c (hal_platform_init): Avoid resetting ethernet PHY chip.
* include/plf_cache.h: [Re]enable caches.
* cdl/hal_powerpc_viper.cdl: Fix RTC calculations.
2002-04-08 Gary Thomas <gthomas@redhat.com>
* src/viper.S: Lots of changes to get ROMRAM mode working from
initial FLASH boot.
2002-03-08 Gary Thomas <gthomas@redhat.com>
* src/viper.S:
* misc/redboot_ROMRAM.ecm:
* include/pkgconf/mlt_powerpc_viper_romram.mlt:
* include/pkgconf/mlt_powerpc_viper_romram.ldi:
* include/pkgconf/mlt_powerpc_viper_romram.h:
* include/pkgconf/mlt_powerpc_viper_ram.mlt:
* include/pkgconf/mlt_powerpc_viper_ram.ldi:
* include/pkgconf/mlt_powerpc_viper_ram.h:
* cdl/hal_powerpc_viper.cdl: Add support for ROMRAM mode.
2002-01-28 Gary Thomas <gthomas@redhat.com>
* src/hal_aux.c: Change mappings since IMMR has moved.
2001-06-21 Jonathan Larmour <jlarmour@redhat.com>
* images/*: Remove. Don't bloat repository with things already on
the web.
2001-05-01 Gary Thomas <gthomas@redhat.com>
* misc/redboot_RAM.ecm:
* misc/redboot_ROM.ecm: Update RedBoot to include compression.
2001-03-14 Gary Thomas <gthomas@redhat.com>
* src/viper.S: Set FLASH/ROM region to use 4 wait states - ~100ns.
* src/hal_aux.c: Use MLT values to define tables.
* include/pkgconf/mlt_powerpc_viper_rom.mlt:
* include/pkgconf/mlt_powerpc_viper_rom.ldi:
* include/pkgconf/mlt_powerpc_viper_rom.h:
* include/pkgconf/mlt_powerpc_viper_ram.mlt:
* include/pkgconf/mlt_powerpc_viper_ram.ldi:
* include/pkgconf/mlt_powerpc_viper_ram.h: Viper board has 8M RAM.
2001-02-23 Jesper Skov <jskov@redhat.com>
* include/plf_cache.h (HAL_FLASH_CACHES_OLD_MACROS): This platform
uses deprecated cache handling macros.
2001-02-23 Gary Thomas <gthomas@redhat.com>
* misc/redboot_ROM.ecm: Renamed from redboot_ROM.cfg
* misc/redboot_RAM.ecm: Renamed from redboot_RAM.cfg
2001-02-21 Gary Thomas <gthomas@redhat.com>
* include/pkgconf/mlt_powerpc_viper_ram.ldi:
* include/pkgconf/mlt_powerpc_viper_ram.mlt:
* include/pkgconf/mlt_powerpc_viper_ram.h: Fix for 16M RAM.
* src/hal_aux.c (hal_platform_init): Set up port B (PHY reset).
Set up for 16M RAM.
2001-02-08 Jesper Skov <jskov@redhat.com>
* cdl/hal_powerpc_viper.cdl: Respect channel configuration
constraints.
* src/hal_diag.c: Replace CYGSEM_HAL_DIAG_MANGLER_None with
CYGDBG_HAL_DIAG_TO_DEBUG_CHAN.
2001-01-31 Jesper Skov <jskov@redhat.com>
* src/hal_diag.c: Replaced CYGDBG_HAL_DIAG_DISABLE_GDB_PROTOCOL
with CYGSEM_HAL_DIAG_MANGLER_GDB/None
//===========================================================================
// ####GPLCOPYRIGHTBEGIN####
// -------------------------------------------
// This file is part of eCos, the Embedded Configurable Operating System.
// Copyright (C) 1998, 1999, 2000, 2001, 2002, 2004 Free Software Foundation, Inc.
//
// This program is free software; you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation; either version 2 or (at your option) any
// later version.
//
// This program is distributed in the hope that it will be useful, but
// WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
// General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program; if not, write to the
// Free Software Foundation, Inc., 51 Franklin Street,
// Fifth Floor, Boston, MA 02110-1301, USA.
// -------------------------------------------
// ####GPLCOPYRIGHTEND####
//===========================================================================
Go to most recent revision | Compare with Previous | Blame | View Log