Subversion Repositories openrisc

2011-01-02  Sergei Gavrikov  <sergei.gavrikov@gmail.com>

        * cdl/hal_sh.cdl: Eliminate some warnings. [ Bugzilla 1001083 ]

2009-02-04  John Dallaway  <john@dallaway.org.uk>

        * src/sh.ld: Process *(.gcc_except_table.*) as for i386
        architecture.

2004-05-27  Gary Thomas  <gary@mlbassoc.com>

        * src/redboot_linux_exec.c (do_exec): Be sensitive to value in
        "entry_address" as this can indicate if the image to be executed
        is valid (the "load" functions set it to "NO_MEMORY" when invalid)

2004-04-30  Yoshinori Sato  <ysato@users.sourceforge.jp>

        * src/sh.ld: Add entry section for targets, like Dreamcast, that
        need special entry code.

2004-04-22  Jani Monoses <jani@iv.ro>

         * cdl/hal_sh.cdl :
         Invoke tail with stricter syntax that works in latest coreutils. 

2004-02-05  Kelvin Lawson  <klawson@ad-holdings.co.uk>

        * include/hal_var_bank.inc: Fix build error on non-FPU systems due to
        CYG_FPSCR.

2003-12-05  Andrew Lunn  <andrew.lunn@ascom.ch>

        * include/hal_intr_excevt.h: 
        * include/hal_intr_vecs.h: hal_delay_us() is a C function.

2003-09-21  Jonathan Larmour  <jifl@eCosCentric.com>

        * cdl/hal_sh.cdl: CYGHWR_HAL_SH_FPU_REGS is only needed if there's an
        FPU.

        * include/hal_var_bank.h (HAL_THREAD_INIT_CONTEXT_FPU): Use FPSCR
        init value from HAL register definitions.

2003-09-19  John Dallaway  <jld@ecoscentric.com>

        * cdl/hal_sh.cdl: Specify default CDL values for sh4_202_md target.

2003-09-11  Nick Garnett  <nickg@ecoscentric.com>

        * include/hal_var_bank.h (HAL_THREAD_INIT_CONTEXT_FPU): Changed
        initial value of fpscr to do round-to-nearest rather than
        round-to-zero.

2003-09-08  Nick Garnett  <nickg@ecoscentric.com>

        * src/vectors.S (cyg_hal_default_exception_vsr): Added code to
        switch to interrupt stack when fielding exceptions from RedBoot or
        some other ROM monitor. Without this we get potential stack
        overflows when debugging via the network.

2003-09-05  Nick Garnett  <nickg@ecoscentric.com>

        * include/hal_arch.h:
        * include/hal_var_bank.h:
        * include/hal_var_bank.inc:
        * src/context.S:
        Added support for floating point state save and restore and GDB 

        * src/hal_misc.c (hal_delay_us): Fixed implementation of this
        routine so that it actually works.

        * src/hal_syscall.c:
        Added support for all supportable syscalls.

        * src/sh_stub.c:
        Added check in __is_bsp_syscall() for trap 34 traps using the TRA
        register.

        * src/vectors.S: Set startup stack size to the same as the
        interrupt stack size. In some configurations of RedBoot the
        previous value was too small.
        
        * include/sh_stub.h:
        Fixed HAL_STUB_PLATFORM_STUBS_FIXUP() to only rewind for a
        breakpoint. Traps are not rewound.
        
        * cdl/hal_sh.cdl: Added option for SH architecture FP register
        count.

2003-07-29  Gary Thomas  <gary@mlbassoc.com> on behalf of
2003-07-29  Yoshinori Sato <ysato@users.sourceforge.jp> 

        * src/sh.ld: Handle all bss* sections (newer compilers).

2003-07-18  Nick Garnett  <nickg@balti.calivar.com>

        * cdl/hal_sh.cdl:
        Changed values for CYGNUM_HAL_RTC_NUMERATOR,
        CYGNUM_HAL_RTC_DENOMINATOR and CYGNUM_HAL_RTC_PERIOD to
        "default_value" from "calculated". This makes it easier
        to change these values globally.
        
2003-04-17  Jonathan Larmour  <jifl@eCosCentric.com>

        * include/hal_var_bank.h (HAL_THREAD_INIT_CONTEXT): Align stack
        pointer before using it.
        * include/hal_var_sp.h (HAL_THREAD_INIT_CONTEXT): Ditto.

2003-04-10  Nick Garnett  <nickg@balti.calivar.com>

        * src/sh.ld:
        Added entry for .stack section in data section.

2003-03-11  Mark Salter  <msalter@redhat.com>

        * src/redboot_linux_exec.c (do_exec): Call eth_drv_stop as necessary.

2003-01-31  Mark Salter  <msalter@redhat.com>

        * src/hal_syscall.c (hal_syscall_handler): Let generic syscall code
        handle exit.

2002-08-02  Andrew Lunn <Andrew.Lunn@ascom.ch>

        * cdl/hal_sh.cdl: The Redboot exec command can now be 
          disabled by CDL
        
2002-04-30  Jesper Skov  <jskov@redhat.com>

        * include/hal_var_sp.inc: Allow variant to provide custom
        interrupt vector layout. This means the size of
        hal_interrupt_handlers/objects/data can be reduced if the vector
        layout is sparse. Something similar could be done for
        _HW_EXEC_ENTRY_TABLE, saving exception_vector_int entries in the
        $vectors_code block. However, this code usually resides in flash
        so there's not much point given todays flash block sizes.

        * cdl/hal_sh.cdl: Added CYGHWR_HAL_SH_FPU and
        CYGHWR_HAL_SH_NO_FPU, allowing an arch level control of FPU
        related tests.
        Skipping test handled in a different way now, so the implements
        statement has been deleted again.

2002-04-29  Jesper Skov  <jskov@redhat.com>

        * include/hal_var_bank.inc: Define hal_exception_entry_extras and
        hal_interrupt_entry_extras.
        * include/hal_var_sp.inc: Define hal_exception_entry_extras and
        hal_interrupt_entry_extras. Disable interrupts on exception
        entry.
        * src/vectors.S: Call hal_exception_entry_extras and
        hal_interrupt_entry_extras.

2002-04-29  Jonathan Larmour  <jlarmour@redhat.com>

        * src/vectors.S:
        Don't use .file as it can confuse debugging since the .file
        doesn't contain the path and therefore the debugger will never
        know where it lives! This conflicts with using -Wa,--gstabs.

2002-04-15  Jonathan Larmour  <jlarmour@redhat.com>

        * src/hal_syscall.c (hal_syscall_handler): Add extra sig argument to
        __do_syscall.

2002-04-22  Jesper Skov  <jskov@redhat.com>

        * include/hal_var_sp.inc: 7044 needs different vector layout than
        76xx since its vectors are hardwired.

2002-04-18  Jesper Skov  <jskov@redhat.com>

        * include/hal_var_sp.inc: Do no translation of entry address if
        cache module defines CYGARC_SH_MOD_CAC_NO_WINDOWS.

        * include/hal_intr_vecs.h: Move all vectors after IRQ7 to variant
        header. Define _IRQ and _LVL for all of the first 7
        interrupts. Define CYGNUM_HAL_INTERRUPT_LVL_MAX

2002-03-06  Jesper Skov  <jskov@redhat.com>

        * include/hal_var_sp.inc: Fix asm comments.

2002-02-28  Jesper Skov  <jskov@redhat.com>

        * src/hal_syscall.c (hal_syscall_handler): Added.
        * src/sh_stub.c (__is_bsp_syscall): Added.
        * cdl/hal_sh.cdl: Build hal_syscall.c

2002-02-27  Jesper Skov  <jskov@redhat.com>

        * src/sh_stub.c (__computeSignal): Changed to use DATA_ACCESS
        names as well.
        * include/hal_intr_vecs.h (_CYGNUM_HAL_VECTOR_FIRST_MEM_FAULT,
        _CYGNUM_HAL_VECTOR_LAST_MEM_FAULT): Same.

2002-02-26  Jesper Skov  <jskov@redhat.com>

        * include/hal_intr_vecs.h: Use DATA_ACCESS vector names instead of
        ADDRESS_ERROR names.

2002-02-15  Jesper Skov  <jskov@redhat.com>

        * src/sh_stub.c (__single_step): Use normal breakpoint instruction
        (trapa #32) for single-stepping.
        On the SH2 the use of trapa#255 causes a different (and unhandled)
        exception, in the range reserved for application
        exceptions/interrupts.

2002-02-14  Jesper Skov  <jskov@redhat.com>

        * include/hal_var_bank.h: Switch mach/macl entries.
        * include/hal_var_sp.h: Same.

        * include/hal_var_sp.inc: Reserve (additional) trampoline for NMI
        to make eCos interrupt numbers match. Make traps use trap numbers
        32-64.
        (hal_cpu_save_regs): Remember to adjust SP for R0 save location.
        (hal_cpu_restore_regs_return): Rewritten to fix errors and allow
        SP to be changed from GDB.

2002-02-13  Jesper Skov  <jskov@redhat.com>

        * src/context.S (hal_thread_load_context): Load up stack pointer
        before enabling interrupts.
        
        * include/hal_var_sp.inc: Fetch the VSR pointer and jump to it
        instead of into the VSR table.
        (hal_cpu_restore_regs_return): adjust sp to point to exception
        state before returning.

2002-02-08  Jesper Skov  <jskov@redhat.com>

        * src/vectors.S: tweak ROMRAM relocation code.

2002-02-07  Jesper Skov  <jskov@redhat.com>

        * include/hal_var_sp.inc: Moved _reset code to below vectors.

2002-01-17  Jesper Skov  <jskov@redhat.com>

        * include/hal_var_bank.inc: Include SH3 register references. Make
        better use of some delay slots.

        * src/vectors.S: Don't save exception/interrupt state on stack
        with debug markers. Load up event value in R4 before calling
        hal_intc_decode so it can be a nop if desired. Removed some SH3
        register references.

        * include/hal_var_sp.inc: Include SH2 offsets, export
        _HW_EXC_ENTRY_TABLE, fix some typos.

        * include/hal_intr_vecs.h: IRL vectors renamed. Added IRQ
        vectors.

2002-01-16  Jesper Skov  <jskov@redhat.com>

        * include/hal_var_bank.h: Fix typo.

        * src/sh_stub.c (__computeSignal): Only handle defined vectors.

        * include/hal_intr_vecs.h: Decode NMI as interrupt 0, moved all
        other vectors. Provide MEM_FAULT vector range.
        * include/hal_var_sp.inc: Changes for NMI-as-interrupt-0.
        * include/hal_var_sp.h: Renamed vector to event to share code.

        * include/hal_intr_excevt.h: Added MEM_FAULT vector ranges and
        CYGHWR_SH_RTC_TIMER_IS_TMU.
        * src/hal_misc.c (hal_delay_us): Only build if
        CYGHWR_SH_RTC_TIMER_IS_TMU. Use MEM_FAULT vector range.

        * include/hal_intr.h: Deleted clock controls.

        * cdl/hal_sh.cdl: Use CYGNUM_HAL_RTC_PRESCALE instread of
        module-specific prescale variable.

        * include/hal_intr_excevt.h (_CYGNUM_HAL_VECTOR_FIRST_MEM_FAULT,
        _CYGNUM_HAL_VECTOR_LAST_MEM_FAULT): Define.
        * include/hal_intr_vecs.h: Same. 
        * src/hal_misc.c (cyg_hal_exception_handler): Use new _MEM_FAULT
        vector range.


        * include/hal_intr_vecs.h: Removed RTC code.

        * include/hal_arch.h: Changed breakpoint instruction to match that
        used in GDB 5.1.
        It also makes better sense on the SH2.

        * include/hal_intr_excevt.h: Interrupt/exception vectors and clock
        handling code moved here...
        * include/hal_intr.h: From here.
        * include/hal_intr_vecs.h: Interrupt/exception vector layout +
        clock handling for SH1/SH2 variants.

        * include/hal_var_sp.inc: Added some comments, fixed number of
        pre-VSR vectors, renamed HW_VSR_TABLE to HW_EXC_ENTRY_TABLE to
        avoid confusion (it has nothing to do with eCos VSRs). Finally,
        made the pre-VSR stuff only compile when really required (since
        it's 4KiB).

2002-01-14  Jesper Skov  <jskov@redhat.com>

        * include/hal_arch.h: Moved HAL_SavedRegisters structure to
        bank variant headers. Same with HAL_THREAD_INIT_CONTEXT,
        HAL_THREAD_GET_SAVED_REGISTERS, HAL_GET_GDB_REGISTERS,
        HAL_SET_GDB_REGISTERS, CYGARC_BUS_ADDRESS, CYGARC_CACHED_ADDRESS,
        and CYGARC_UNCACHED_ADDRESS.
        * src/vectors.S: Moved exception/interrupt entry code to bank
        variant include file.
        * include/hal_var_sp.inc: Added. Contains (new) vectors.S stuff
        for SH2.
        * include/hal_var_sp.h: Added. Contains (new) hal_arch.h stuff for
        SH2 variant.
        * include/hal_var_bank.inc: Added. Contains old vectors.S stuff
        for SH3/SH4 variants.
        * include/hal_var_bank.h: Added. Contains old hal_arch.h stuff for
        SH3/SH4 variants.

        * src/hal_mk_defs.c: Added conversion for entry stack.

2001-11-16  Nick Garnett  <nickg@redhat.com>

        * src/hal_misc.c (hal_msbit_index): Fixed this function so that it
        actually works! 

2001-10-15  David Howells  <dhowells@redhat.com>

        * cdl/hal_sh.cdl: improved the description on the RTC constants
        component.

2001-10-11  Jesper Skov  <jskov@redhat.com>

        * src/hal_mk_defs.c (main): Fixed warning.

2001-10-01  Jonathan Larmour  <jlarmour@redhat.com>

        * src/sh.ld: Make separate section for GOT and .eh_frame.
        Make macro section for all reloc sections.
        Input extras.o unconditionally.
        * cdl/hal_sh.cdl: Don't bother with -DEXTRAS=1 - unconditional now.

2001-09-12  Jesper Skov  <jskov@redhat.com>

        * src/vectors.S: Don't include C intr header.

2001-09-11  Jonathan Larmour  <jlarmour@redhat.com>

        * cdl/hal_sh.cdl (CYGHWR_HAL_SH_BIGENDIAN): Set the default
        from what the platform requests, using the new
        CYGINT_HAL_SH_PLF_LITTLEENDIAN_DEFAULT CDL interface.

        * src/sh.ld: Support .rel.got input sections.

2001-09-05  Jesper Skov  <jskov@redhat.com>

        * src/sh_stub.c (__single_step): Changed type 2 handling.

2001-08-22  Gary Thomas  <gthomas@redhat.com>

        * src/redboot_linux_exec.c: 
        printf() is no longer a part of RedBoot.  Thus all programs
        must use diag_printf() and related functions instead.

2001-07-09  Jesper Skov  <jskov@redhat.com>

        * src/sh_stub.c: Fixed potential SH4 problem in UBC handling.

2001-07-02  Jesper Skov  <jskov@redhat.com>

        * include/hal_arch.h: CYGARC_PHYSICAL_ADDRESS renamed to
        CYGARC_BUS_ADDRESS.

2001-06-27  Jesper Skov  <jskov@redhat.com>

        * include/hal_arch.h: Added CPU address space translation macros.

2001-06-19  Jesper Skov  <jskov@redhat.com>

        * src/redboot_linux_exec.c: Only base address, entry and cmdline
        options are always used. Other commands only affect image if
        set. This allows combined kernel&initrd images to be loaded in one
        file where the initrd address & size is already recorded at the
        start of the image.

        From YAEGASHI Takeshi <t@keshi.org> with a few changes:
        * cdl/hal_sh.cdl: Added RedBoot exec command options.
        * src/redboot_linux_exec.c: Added.

2001-05-29  Jesper Skov  <jskov@redhat.com>

        * include/hal_io.h: Include var_io.h

2001-05-28  Jesper Skov  <jskov@redhat.com>

        * src/sh.ld: Added .2ram section handling.

2001-01-26  Jesper Skov  <jskov@redhat.com>

        * tests/intr0.c: Moved test header inclusion to proper location.

2001-01-18  Jesper Skov  <jskov@redhat.com>

        Case 105302
        * src/vectors.S: Moved ILVL table to variant code.
        * tests/intr0.c: Added.

2001-01-04  Jesper Skov  <jskov@redhat.com>

        * src/sh.ld: Make sure .data and .bss section sizes are aligned.

2000-12-13  Jesper Skov  <jskov@redhat.com>
2000-12-13  Jonathan Larmour  <jlarmour@redhat.com>

        * src/vectors.S (__reset): Use proper entry pointer for ROMRAM
        startup type.

2000-12-08  Jesper Skov  <jskov@redhat.com>

        * src/vectors.S (cyg_scheduler_sched_lock): Changed to use
        SYM_PTR_REF. Brian Danilko spotted this.

2000-11-24  Jonathan Larmour  <jlarmour@redhat.com>

        * src/sh.ld: _reset should be adorned with CYG_LABEL_DEFN
        * src/vectors.S: CYG_LABEL_DEFN should have been used everywhere
        that CYG_LABEL_NAME was used, except for the scheduler lock which
        is special as it is defined in C as an asm alias.
        * include/arch.inc: Similarly here for symbol macros

        * include/basetype.h (CYG_LABEL_NAME): Delete. This is now obsolete.

2000-11-22  Jesper Skov  <jskov@redhat.com>

        * src/sh.ld: Added mangling to all symbols.
        * src/vectors.S: Same. Plus introduce macro to simplify (a bit)
        the definition of inline immediate constants.

        * include/sh_regs.h: Include HAL config.

        * include/hal_arch.h: Don't prefix with _ in HAL_BREAKPOINT.
        * src/sh_stub.c: Matching changes - hack to handle both
        conventions.

        * include/basetype.h: Made CYG_LABEL_DEFN depend on toolchain.

        * include/arch.inc: Added symbol ref/def macros.
        * src/context.S: Removed FUNC_START macro.

2000-11-09  Jesper Skov  <jskov@redhat.com>

        * src/sh_stub.c (__single_step): Fix CPP problem.

2000-10-31  Jesper Skov  <jskov@redhat.com>


        * include/mod_7707a.h: Moved to SH3 HAL.
        * include/mod_7708.h: Same.
        * include/mod_7709a.h: Same.
        * include/mod_7729.h: Same.
        * include/sh3_sci.h: Same.
        * include/sh3_scif.h: Same.
        * src/sh3_sci.c: Same.
        * src/sh3_scif.c: Same.

        * include/hal_cache.h: Moved SH3 code out to new SH3 HAL.
        * cdl/hal_sh.cdl: Same.
        * include/hal_intr.h: Same.
        * include/sh_regs.h: Same.
        * src/hal_misc.c: Same.
        * src/hal_mk_defs.c: Same.

        * src/vectors.S: Changed to support SH4. Moved CPU post-reset init
        code to variant HALs. Moved interrupt decoding to variant HAL
        macros. Moved cache code to variant HALs.

2000-10-24  Jesper Skov  <jskov@redhat.com>

        * src/vectors.S (hal_hw_init): Added errata comment.

2000-10-23  Jesper Skov  <jskov@redhat.com>

        * src/hal_misc.c: Always include hal_intr.h

        * src/sh3_sci.c: Use specified value for default baud rate.
        * src/sh3_scif.c: Same.

2000-10-20  Jesper Skov  <jskov@redhat.com>

        * src/hal_misc.c: Update __mem_fault_handler declaration.

2000-10-19  Jesper Skov  <jskov@redhat.com>

        * include/sh_regs.h (CYGARC_REG_WCR1_0WS, CYGARC_REG_WCR2_0WS):
        Added for consistent init code.
        
2000-10-17  Jesper Skov  <jskov@redhat.com>

        * src/vectors.S (__reset_platform): Rearrange constants used in
        early init code.

2000-10-16  Jonathan Larmour  <jlarmour@redhat.com>

        * include/hal_arch.h (CYGARC_JMP_BUF_SIZE): Define hal_jmp_buf in
        terms of this.

2000-10-11  Jesper Skov  <jskov@redhat.com>

        * src/vectors.S (__reset_platform): Clear watchdog control flags.
        Added missing NOP in bra delay slot.

        * src/hal_misc.c (hal_delay_us): Updated to use the correct config
        constants.

        * cdl/hal_sh.cdl: Fix typo.

        * include/sh_regs.h: Added macros to compute CYGARC_RTCSR init
        values for SDRAM refresh. Needs to be backed up by generic CDL
        configury for memory controller.

2000-10-10  Jesper Skov  <jskov@redhat.com>

        * include/sh_regs.h: Compute CPG init value for all versions.

        * include/mod_7707a.h: Added CPG version.
        * include/mod_7708.h: Same.
        * include/mod_7709a.h: Same.
        * include/mod_7729.h: Same.

        * cdl/hal_sh.cdl: Support various CPG versions. 

2000-10-05  Jesper Skov  <jskov@redhat.co.uk>

        * src/sh_stub.c: Handle UBC versions in CPUs currently supported
        by HAL.
        * include/sh_regs.h: Added UBC version differences.
        * include/mod_7707a.h: Specify UBC version.
        * include/mod_7708.h: Ditto.
        * include/mod_7709a.h: Ditto.
        * include/mod_7729.h: Ditto.

        * src/hal_misc.c: Skip IRQ0-3 handling in IRQIRL mode.
        * include/sh_regs.h: Define interrupt controler init value.
        * src/vectors.S: Use interrupt controller init value.
        * cdl/hal_sh.cdl: Put CPU type/endian mode in a component. Added
        interrupt control options.

2000-10-03  Jesper Skov  <jskov@redhat.co.uk>

        * src/vectors.S: Added flush function. Changes to cache_write_mode
        function.

        * src/hal_mk_defs.c: Added cache definitions.

        * src/hal_misc.c (cyg_hal_enable_caches): Let config control cache
        init.  
        * include/hal_cache.h: Added flush macro. Changes to allow
        mode function to handle different settings for the two
        controllable areas.

        * cdl/hal_sh.cdl: Added cache controls.

2000-09-26  Jesper Skov  <jskov@redhat.com>

        * include/sh_regs.h: Added computation of initial FRQCR
        value. Made watchdog timeout time depend on the proper clock
        setting.

        * include/hal_intr.h (HAL_CLOCK_INITIALIZE): Allow timer
        prescaling to be controlled. Fix typo.

        * cdl/hal_sh.cdl: Added options to properly compute/control the
        various clock signals.

2000-09-25  Jesper Skov  <jskov@redhat.com>

        * src/sh3_scif.c (cyg_hal_plf_scif_init_channel): Use _SCBRR_
        macros.

        * include/sh_regs.h (CYGARC_SCBRR_CKSx, CYGARC_SCBRR_N): Removed
        duplicates of the macros. Compute _CKSx properly.

2000-09-06  Gary Thomas  <gthomas@redhat.com>

        * include/mod_7729.h: Includes PFC (programmable I/O) module.

2000-09-06  Jesper Skov  <jskov@redhat.com>

        * cdl/hal_sh.cdl: Added 7729 option.

2000-08-31  Jesper Skov  <jskov@redhat.com>

        * include/mod_7709a.h: Added UBC definition.
        * include/mod_7708.h: Same.
        * include/mod_7729.h: Same.
        * include/mod_7707a.h: Same.
        * include/sh_regs.h: Extra UBC definitions.
        * src/sh_stub.c: If core supports UBC, use it for
        single-stepping.

2000-08-29  Jesper Skov  <jskov@redhat.com>

        * include/mod_7729.h: Added.

2000-07-20  Jesper Skov  <jskov@redhat.com>

        * src/sh_stub.c (__single_step): Skip trap instructions.

2000-07-18  Gary Thomas  <gthomas@redhat.com>

        * src/vectors.S (__reset): Change calculation of uncached startup
        address.
        * include/mod_7707a.h: 7707a has 32K caches (we believe).

2000-07-17  Gary Thomas  <gthomas@redhat.com>

        * src/hal_misc.c (cyg_hal_exception_handler): Handle exception caused by
        GDB stubs memory accesses.

2000-07-16  Gary Thomas  <gthomas@redhat.com>

        * include/hal_intr.h: Define HAL_DELAY_US() - see below.

        * src/hal_misc.c (hal_delay_us): New function.  Used in ROM/stand-alone
        applications when there is no kernel.

2000-07-15  Gary Thomas  <gthomas@redhat.com>

        * include/sh_regs.h: Add additional 7707 registers.

2000-07-06  Jesper Skov  <jskov@redhat.com>

        * src/vectors.S: 
        * include/mod_7707a.h:
        * include/hal_intr.h:
        * include/sh_regs.h:
        Added additional 7707 interrupt vectors.
        
2000-06-30  Jesper Skov  <jskov@redhat.com>

        * src/vectors.S (__reset): Jump to VMA for RAM startup.
        (_complete_setup): Fix merge bug.

        * src/sh3_scif.c:
        * src/sh3_sci.c:
        calling i/f macro changes.

        * src/vectors.S (__reset): Fix alignment problem.

2000-06-29  Gary Thomas  <gthomas@redhat.com>

        * src/vectors.S: Reorg initialization (reset) code to be all
        in one, non-fixed location.  Required for platforms with more
        complex initialization sequences.

2000-06-29  Jesper Skov  <jskov@redhat.com>

        * src/sh3_sci.c:
        * src/sh3_scif.c:
        Use per-channel data structure instead of code cruft.

2000-06-28  Jesper Skov  <jskov@redhat.com>

        * include/sh3_sci.h:    [added]
        * include/sh3_scif.h:   [added] 
        * include/sh3_scif.inl: [removed]
        * include/sh_sci.inl:   [removed]
        * src/sh3_sci.c:        [added]
        * src/sh3_scif.c:       [added]
        * cdl/hal_sh.cdl:
        Rewrote serial drivers for comm procs usage.
        
2000-06-27  Jesper Skov  <jskov@redhat.com>

        * src/vectors.S: Added arch and platform init calls. Added ctrlc
        init call. Replaced old BREAK magic with new ctrlc magic.

        * src/sh.ld: Added extra _ on NETDEVTAB labels. Define
        hal_virtual_vector_table.

        * src/hal_misc.c: hal_default_isr moved to common HAL.

        * cdl/hal_sh.cdl: Also build simple drivers.

2000-06-21  Nick Garnett  <nickg@cygnus.co.uk>

        * src/sh_stub.c (__is_breakpoint_function): Removed use of
        CYG_LABEL_NAME() and added underscore to _breakinst.

        * src/context.S: Switched use of CYG_LABEL_NAME() to
        CYG_LABEL_DEFN().

        * include/basetype.h: Removed definition of CYG_LABEL_NAME() and
        added CYG_LABEL_DEFN().

        * src/sh.ld: Switched to new table definition mechanism.

2000-06-15  Jesper Skov  <jskov@redhat.com>

        * include/hal_intr.h: Added HAL_DEFAULT_ISR.

2000-06-08  Jesper Skov  <jskov@redhat.com>

        * include/hal_arch.h (CYGARC_HAL_SAVE_GP, CYGARC_HAL_RESTORE_GP):
        Added.

        * include/mod_7708.h: 
        * include/mod_7709a.h: 
        * src/vectors.S:
        Minor config change to get rid of growing list of variant checks.

2000-06-08  Jesper Skov  <jskov@redhat.com>

        * include/mod_7707a.h: 
        * src/vectors.S:
        * cdl/hal_sh.cdl: 
        Added first level of support for 7707A variant.

2000-06-06  Jesper Skov  <jskov@redhat.com>

        * src/vectors.S: INTEVT2 is not defined on all variants. Protect
        accordingly. (Haruki Kashiwaya)

2000-05-08  Jesper Skov  <jskov@redhat.com>

        * cdl/hal_sh.cdl: Make sure CPU variant definition ends up in
        system.h

2000-05-01  Jesper Skov  <jskov@redhat.com>

        * include/mod_7709a.h:
        * include/sh_regs.h:
        Add PFC/C definitions.
        
2000-04-26  Jesper Skov  <jskov@redhat.com>

        * src/hal_mk_defs.c: Added some caching data.

        * src/vectors.S:
        * include/hal_cache.h:
        Rewrote caching functions in assembly with appropriate magic to
        have the code execute out of a non-cachable memory shadow.

2000-04-25  Jesper Skov  <jskov@redhat.com>

        * include/hal_cache.h (HAL_UCACHE_WRITE_MODE): Also wiggle the WT
        bit. It has opposite polarity of the CB bit.

2000-04-25  Jesper Skov  <jskov@redhat.com>

        * src/vectors.S: Init IPRC-E. Force IRQ mode.
        * include/hal_intr.h: Added IRQ0-IRQ3 entries. Added simple
        interrupt configuration and acknowledge.
        * include/sh_regs.h: Added more interrupt control definitions.

2000-04-12  Jesper Skov  <jskov@redhat.com>

        * src/vectors.S: Entry code rewritten to allow ROMRAM startups.

        * src/sh.ld: Change LMA alignment to 16 (workaround
        902557-CR). Provide vector LMA address.

        * include/sh_sci.inl: Replaced hardcoded baud rate constant with 
        macro function.

        * cdl/hal_sh.cdl: Don't let interface define anything.

2000-04-10  Jesper Skov  <jskov@redhat.com>

        * src/vectors.S: Get interrupt event code from the proper register.
        Removed some platform specific debug code. Let cyg_hal_gdb_isr
        deal with C-c issues.
        
        * include/sh_regs.h: Moved module registers to
        0xa0000000-0xc0000000 which is also non-cachable. The reason is
        that EVENT2 can only be accessed at 0xa4000000.

        * include/sh3_scif.inl: Read back SR before clearing it (or the
        clear don't have an effect).

        * include/hal_intr.h: Mask/unmask functions handle entire ISR
        range now.

2000-04-07  Jesper Skov  <jskov@redhat.com>

        * include/sh3_scif.inl: Status register is 16 bit wide, not 8.

        * include/sh_regs.h: Access all module registers in the space
        0xe0000000-0xffffffff since caching is disabled here.

2000-04-06  Jesper Skov  <jskov@redhat.com>

        * src/sh.ld (_hal_vsr_table): Get address from platform CDL.

2000-04-04  Jesper Skov  <jskov@redhat.com>

        * include/sh3_scif.inl: Should be able to work with FIFO enabled.
        * include/sh_regs.h: Fixed RCOUNT/TCOUNT and added some comments.

2000-04-03  Jesper Skov  <jskov@redhat.com>

        * include/sh3_scif.inl: Can drive either IRDA or SCIF module.

        * include/sh_regs.h: 
        * include/mod_7709a.h:
        Added IRDA definitions (mostly a copy of SCIF definitions).
        
2000-03-31  Jesper Skov  <jskov@redhat.com>

        * include/sh_regs.h: Added bit definitions for BSC.

        * include/sh3_scif.inl: Added.
        * include/hal_intr.h: Added hack to work around macro
        problem. Need to rewrite macro as inline function, but need to
        investigate a optimization problem first.
        * include/sh_regs.h: Replaced hardcoded baud rate constants with
        a macro which calculates the proper values based on baud rate
        and CPU clock speed.

        * include/sh_regs.h:
        * include/hal_intr.h (HAL_INTERRUPT_SET_LEVEL):
        Level handling for 7709a added.

        * src/vectors.S: ISR mask tables enabled per CPU variant, not
        target.

2000-03-30  Jesper Skov  <jskov@redhat.com>

        * include/hal_intr.h: Added 7709a interrupt definitions.

2000-03-20  Jesper Skov  <jskov@redhat.com>

        * include/sh_regs.h: Add definitions for RTC module.

2000-03-20  Jesper Skov  <jskov@redhat.com>

        * src/hal_mk_defs.c: Added CYGNUM_HAL_VSR_EXCEPTION_COUNT

2000-03-16  Jesper Skov  <jskov@redhat.com>

        * include/mod_7709a.h: 
        * include/mod_7708.h: 
        * include/sh_regs.h: 
        Adding new module definitions, conditionally included depending on
        chosen CPU implementation. Each CPU defines its own set of
        included modules (and module versions).

        * include/hal_cache.h: Get cache specs from CPU module file.

        * cdl/hal_sh.cdl: Added CPU implementation controls.

2000-03-03  Jonathan Larmour  <jlarmour@redhat.co.uk>

        * include/sh_stub.h: Make C++ safe

2000-02-28  Jesper Skov  <jskov@redhat.com>

        * src/vectors.S:
        * src/hal_mk_defs.c: 
        * src/context.S: 
        * include/hal_arch.h: 
        * cdl/hal_sh.cdl: 
        Added hal_mk_defs allowing assembly to use C symbols.
        Cleaned up setjmp/longjmp structure.

        * include/arch.inc: Added interrupt macros.
        * src/vectors.S: Leave interrupt enable to interrupt_end, ensuring
        proper use of interrupt_stack. Use range-checking instead of
        counter for switches to interrupt_stack.
        * src/context.S: Save and restore interrupt state on thread
        switches.
        * include/hal_arch.h: Set thread initial SR state to allow
        interrupts.

2000-02-18  Jesper Skov  <jskov@redhat.com>

        * src/context.S: Fix comment character.

2000-02-16  Jesper Skov  <jskov@redhat.com>

        * cdl/hal_sh.cdl: 
        * include/basetype.h:
        Added LE support.

2000-02-15  Jesper Skov  <jskov@redhat.com>

        * src/vectors.S: Leave vector initialization to platform. Get rid
        of stubs startup type.

        * src/sh.ld: Define hal_vsr_table address.

        * include/hal_intr.h: provide CYGNUM_HAL_VSR_EXCEPTION_COUNT.

2000-02-02  Jesper Skov  <jskov@redhat.com>

        * src/sh.ld: Fix typo.

2000-01-28  Gary Thomas  <gthomas@cygnus.co.uk>

        * src/sh.ld: Add support for network package.

2000-01-24  Jesper Skov  <jskov@cygnus.co.uk>

        * src/vectors.S (__interrupt_stack): Remove stubs config check for
        CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK.

1999-12-21  Jonathan Larmour  <jlarmour@cygnus.co.uk>

        * include/hal_cache.h: Rename CYG_HAL_SH_SH7708 ->
        CYGPKG_HAL_SH_EDK7708

        * include/sh_regs.h: Likewise

        * src/vectors.S: Likewise
        Rename CYG_HAL_USE_ROM_MONITOR_GDB_STUBS ->
        CYGSEM_HAL_USE_ROM_MONITOR_GDB_stubs

1999-12-02  John Dallaway  <jld@cygnus.co.uk>

        * cdl/hal_sh.cdl:

        Use the <PACKAGE> token in custom rules.

1999-12-01  John Dallaway  <jld@cygnus.co.uk>

        * cdl/hal_sh.cdl:

        Use the <PREFIX> token in custom rules.

1999-11-04  John Dallaway  <jld@cygnus.co.uk>

        * cdl/hal_sh.cdl:

        Output custom rule dependency information to .deps files in
        the current directory.

        Dispense with the need to create a 'src' sub-directory.

1999-10-29  Jesper Skov  <jskov@cygnus.co.uk>

        * cdl/hal_sh.cdl: Added.

1999-09-01  Jesper Skov  <jskov@cygnus.co.uk>

        * include/sh_regs.h: Added watchdog registers.

1999-07-30  Jesper Skov  <jskov@cygnus.co.uk>

        * src/sh_stub.c (__single_step): Added handling of bt/s and bf/s.

1999-07-12  Jesper Skov  <jskov@lassi.cygnus.co.uk>

        * src/sh_stub.c: Use UCOND_RBR_MASK instead of BRAF_MASK.

1999-07-05  Jesper Skov  <jskov@cygnus.co.uk>

        * src/sh_stub.c (__single_step): And of bsrf.

1999-07-02  Jesper Skov  <jskov@cygnus.co.uk>

        * src/sh_stub.c (__single_step): Added handling of braf
        instruction.

1999-06-25  Jesper Skov  <jskov@cygnus.co.uk>

        * src/vectors.S (__startup_stack): Increased size to allow the
        twothreads example to run.

1999-06-24  Jesper Skov  <jskov@cygnus.co.uk>

        * src/vectors.S: CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS overrides use
        of stubs in ROM.

        * src/sh_stub.c (__computeSignal): Renamed _IO_ vectors to _DATA_.

1999-06-21  Jesper Skov  <jskov@cygnus.co.uk>
        PR 20200
        * include/hal_intr.h: Renamed _IO_ error vectors to _DATA_.

        * src/vectors.S: Increased size of startup stack.

1999-06-08  Jesper Skov  <jskov@cygnus.co.uk>

        * include/pkgconf/hal_sh.h: Added CDL for
        CYGHWR_HAL_SH_HANDLE_SPURIOUS_INTERRUPTS.

        * src/vectors.S: 
        * include/hal_intr.h: 
        Decode exceptions before the VSR level.

1999-06-02  Jesper Skov  <jskov@cygnus.co.uk>

        * src/vectors.S: Cleaned up the interrupt entry/exit code.
        Made it have consistent register-bank usage.

1999-06-01  Jesper Skov  <jskov@cygnus.co.uk>

        * src/context.S (hal_thread_switch_context): Save PC when thread
        debugging enabled.

        * src/vectors.S:
        * include/hal_arch.h: 
        * include/sh.inc: 
        Added handling of VBR and GBR.

        * include/hal_intr.h: 
        * src/vectors.S:
        Added proper handling of nested interrupts.

        * src/vectors.S (__interrupt): Added handling of spurious event=0
        interrupts. 

1999-05-31  Jesper Skov  <jskov@cygnus.co.uk>

        * src/vectors.S: Fixed comment.

        * include/sh_sci.inl (cyg_hal_gdb_isr): Alter CR using the proper
        mask.

        * include/hal_cache.h (HAL_UCACHE_WRITE_MODE): Fixed typo.

        * src/hal_misc.c (cyg_hal_enable_caches): Enable write-back mode.

        * src/sh_stub.c (__computeSignal): 
        Added proper cause->signal decoding.
        
        * src/sh_stub.c: 
        * src/hal_misc.c:
        * include/hal_intr.h: 
        * include/hal_arch.h:
        Cleaned up some FIX MEs.

        * include/sh_regs.h: Added CYGARC_REG_SCSSR_CLEARMASK.

1999-05-28  Jesper Skov  <jskov@cygnus.co.uk>

        * include/hal_arch.h: 
        * src/vectors.S: 
        Fixed stack size macros.

1999-05-27  Jesper Skov  <jskov@cygnus.co.uk>

        * include/hal_cache.h: Include io and register header files.

        * include/hal_intr.h: 
        * src/vectors.S (_hal_interrupt_stack_call_pending_DSRs):
        Added DSR-calls-on-interrupt-stack support.     

1999-05-27  Jesper Skov  <jskov@cygnus.co.uk>

        * include/hal_cache.h: Force cache macros to use registers, or
        they fail when compiled without optimization.

1999-05-26  Jesper Skov  <jskov@cygnus.co.uk>

        * include/hal_intr.h:
        Fix asm constraints.

        * src/vectors.S: Fixed cyg_instrument call.
        Added forgotten delay-slot nop after bra.
        
1999-05-26  Jesper Skov  <jskov@cygnus.co.uk>

        * include/sh_regs.h: Added some more baud rate values.

1999-05-25  Jesper Skov  <jskov@cygnus.co.uk>

        * src/vectors.S: Get ISR count from hal_intr.h.
        Define regions of interrupt/exception handlers that are debugging
        safe.

        * include/hal_intr.h: Split in two parts - top is assembly safe.

1999-05-24  Jesper Skov  <jskov@cygnus.co.uk>

        * src/hal_misc.c (cyg_hal_enable_caches): Disable writeback for
        now.

        * include/hal_cache.h: 
        Fixed typos and compiler warnings.

        * src/hal_misc.c:
        Renamed BCACHE to U(nified)CACHE.

1999-05-24  Jesper Skov  <jskov@cygnus.co.uk>

        * include/sh_regs.h: Added cache register definitions.

        * include/hal_cache.h: Defined cache macros.

        * src/hal_misc.c (cyg_hal_enable_caches): Use BCACHE macros.

        * src/vectors.S (_start): Call cache init function.

        * include/hal_intr.h: Ignore reserved vectors when accessed by ISR
        macros.
        (HAL_CLOCK_INITIALIZE): Removed hack that made clock run at 1/4 speed.

        * include/hal_arch.h:
        * src/context.S: 
        Implemented setjmp/longjmp functions.

1999-05-21  Jesper Skov  <jskov@cygnus.co.uk>

        * src/sh.ld: Fix _stext/_etext naming.

        * include/hal_intr.h: Added missing interrupt sources.

        * include/sh_sci.inl: Added GDB_BREAK support.

        * src/vectors.S (__default_interrupt_vsr): Added GDB_BREAK
        support.
        Fixed register overwrite.
        Set SR on exception/interrupt entry to allow breakpoints in
        handlers.
        
1999-05-21  Jesper Skov  <jskov@cygnus.co.uk>

        * src/vectors.S: Added support for handling of exceptions by stub
        in ROM.

        * include/sh_sci.inl (init_serial): Added comment.

        * src/vectors.S (_cyg_interrupt_stack_base, _cyg_interrupt_stack): 
        Fixed naming.

        * src/context.S: Removed MINIMUM_CONTEXT handling as it was
        flawed. A better version doesn't save many cycles.

1999-05-21  Hugo Tyson  <hmt@cygnus.co.uk>

        * include/hal_intr.h: Define HAL_INTERRUPT_STACK_BASE and
        HAL_INTERRUPT_STACK_TOP so that stack usage macros in
        kernel/.../stackmon.hxx can work.

        * src/vectors.S (cyg_interrupt_stack_base): Define this symbol for
        the interrupt stack and its friend for the stack top so that we
        can publish them with nice names.

1999-05-21  Jesper Skov  <jskov@cygnus.co.uk>

        * src/vectors.S (__default_exception_vsr): Decode cause of
        exception.

        * src/sh_stub.c (__clear_single_step): Let fixup code handle PC
        decrementing.

        * include/sh_stub.h: Fix PC after a trap instruction was hit.

1999-05-21  Jesper Skov  <jskov@cygnus.co.uk>

        * src/vectors.S: 
        * include/hal_intr.h: 
        Use IMASK to control interrupts rather than BL.

        * src/sh_stub.c: Added single step code.
        Don't skip instructions when single stepping.

1999-05-20  Jesper Skov  <jskov@cygnus.co.uk>

        * src/vectors.S: Fixed errors due to trunk-move cleanup.
        Added counter to debug code. Fixed bug in debug code(!).
        Doubled startup stack size.

1999-05-20  Jesper Skov  <jskov@cygnus.co.uk>

        * Moved files to CVS trunk.

1999-05-19  Jesper Skov  <jskov@cygnus.co.uk>

        * src/vectors.S: Fixed comment.

        * include/sh_sci.inl: Set speed to 38400 when not RAM startup.

        * include/hal_arch.h: Enable interrupts before a trap. 

1999-05-19  Jesper Skov  <jskov@cygnus.co.uk>

        * src/vectors.S (__reset): Added initial jump to get from address
        0 to ROM.

        * include/sh_regs.h: Added BSC register definitions.

1999-05-19  Jesper Skov  <jskov@cygnus.co.uk>

        * Most things working now. Will start keeping track of changes.
        

1999-04-22  Jesper Skov  <jskov@lassi.cygnus.co.uk>

        * Set up directory structure.

//===========================================================================
// ####GPLCOPYRIGHTBEGIN####                                                
// -------------------------------------------                              
// This file is part of eCos, the Embedded Configurable Operating System.   
// Copyright (C) 1998, 1999, 2000, 2001, 2002, 2009 Free Software Foundation, Inc.
//
// This program is free software; you can redistribute it and/or modify     
// it under the terms of the GNU General Public License as published by     
// the Free Software Foundation; either version 2 or (at your option) any   
// later version.                                                           
//
// This program is distributed in the hope that it will be useful, but      
// WITHOUT ANY WARRANTY; without even the implied warranty of               
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU        
// General Public License for more details.                                 
//
// You should have received a copy of the GNU General Public License        
// along with this program; if not, write to the                            
// Free Software Foundation, Inc., 51 Franklin Street,                      
// Fifth Floor, Boston, MA  02110-1301, USA.                                
// -------------------------------------------                              
// ####GPLCOPYRIGHTEND####                                                  
//===========================================================================