Subversion Repositories openrisc

# ====================================================================
#
#      hal_sh.cdl
#
#      SH architectural HAL package configuration data
#
# ====================================================================
## ####ECOSGPLCOPYRIGHTBEGIN####                                            
## -------------------------------------------                              
## This file is part of eCos, the Embedded Configurable Operating System.   
## Copyright (C) 1998, 1999, 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
##
## eCos is free software; you can redistribute it and/or modify it under    
## the terms of the GNU General Public License as published by the Free     
## Software Foundation; either version 2 or (at your option) any later      
## version.                                                                 
##
## eCos is distributed in the hope that it will be useful, but WITHOUT      
## ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or    
## FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License    
## for more details.                                                        
##
## You should have received a copy of the GNU General Public License        
## along with eCos; if not, write to the Free Software Foundation, Inc.,    
## 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.            
##
## As a special exception, if other files instantiate templates or use      
## macros or inline functions from this file, or you compile this file      
## and link it with other works to produce a work based on this file,       
## this file does not by itself cause the resulting work to be covered by   
## the GNU General Public License. However the source code for this file    
## must still be made available in accordance with section (3) of the GNU   
## General Public License v2.                                               
##
## This exception does not invalidate any other reasons why a work based    
## on this file might be covered by the GNU General Public License.         
## -------------------------------------------                              
## ####ECOSGPLCOPYRIGHTEND####                                              
# ====================================================================
######DESCRIPTIONBEGIN####
#
# Author(s):      jskov
# Original data:  jskov, nickg
# Contributors:
# Date:           1999-10-29
#
#####DESCRIPTIONEND####
#
# ====================================================================

cdl_package CYGPKG_HAL_SH {
    display       "SH architecture"
    parent        CYGPKG_HAL
    hardware
    include_dir   cyg/hal
    define_header hal_sh.h
    description   "
        The SH (SuperH) architecture HAL package provides generic
        support for this processor architecture. It is also
        necessary to select a specific target platform HAL
        package."

    compile       hal_misc.c context.S sh_stub.c

    # The "-o file" is a workaround for CR100958 - without it the
    # output file would end up in the source directory under CygWin.
    # n.b. grep does not behave itself under win32
    make -priority 1 {
        <PREFIX>/include/cyg/hal/sh_offsets.inc : <PACKAGE>/src/hal_mk_defs.c
        $(CC) $(ACTUAL_CFLAGS) $(INCLUDE_PATH) -Wp,-MD,sh_offsets.tmp -o hal_mk_defs.tmp -S $<
        fgrep .equ hal_mk_defs.tmp | sed s/#// > $@
        @echo $@ ": \\" > $(notdir $@).deps
        @tail -n +2 sh_offsets.tmp >> $(notdir $@).deps
        @echo >> $(notdir $@).deps
        @rm sh_offsets.tmp hal_mk_defs.tmp
    }

    make {
        <PREFIX>/lib/vectors.o : <PACKAGE>/src/vectors.S
        $(CC) -Wp,-MD,vectors.tmp $(INCLUDE_PATH) $(CFLAGS) -c -o $@ $<
        @echo $@ ": \\" > $(notdir $@).deps
        @tail -n +2 vectors.tmp >> $(notdir $@).deps
        @echo >> $(notdir $@).deps
        @rm vectors.tmp
    }

    make {
        <PREFIX>/lib/target.ld: <PACKAGE>/src/sh.ld
        $(CC) -E -P -Wp,-MD,target.tmp -xc $(INCLUDE_PATH) $(ACTUAL_CFLAGS) -o $@ $<
        @echo $@ ": \\" > $(notdir $@).deps
        @tail -n +2 target.tmp >> $(notdir $@).deps
        @echo >> $(notdir $@).deps
        @rm target.tmp
    }

    cdl_interface CYGINT_HAL_SH_DMA_CHANNELS {
        display       "Number of DMA channels"
    }

    cdl_interface CYGINT_HAL_SH_DMA_CHANNELS_USED {
        display       "Number of requested DMA channels"
        requires      CYGINT_HAL_SH_DMA_CHANNELS_USED <= CYGINT_HAL_SH_DMA_CHANNELS
        description   "
            Various drivers may request use of a DMA channel, but only
            so many are available. These interfaces make sure the
            DMA resources are not overcommitted."
    }

    cdl_component CYGPKG_HAL_SH_CPU {
        display          "CPU type and endian mode controls"
        flavor     none
        no_define
        description      "
            CPU type and endian mode can be selected using these option."

        cdl_interface CYGINT_HAL_SH_VARIANT {
            display  "Number of variant implementations in this configuration"
            no_define
            requires 1 == CYGINT_HAL_SH_VARIANT
        }

        cdl_option CYGHWR_HAL_SH_FPU {
            display       "Variant FPU support"
            default_value 0
        }

        cdl_option CYGHWR_HAL_SH_NO_FPU {
            display       "Variant has no FPU support"
            calculated    !CYGHWR_HAL_SH_FPU
        }

        cdl_option CYGHWR_HAL_SH_FPU_REGS {
            display       "Variant FPU register count"
            flavor        data
            active_if     CYGHWR_HAL_SH_FPU
            default_value 16
            legal_values  { 16 32 }
            description   "Number of FPU registers present. The SH3 has
                           16 registers in one bank. The SH4 has 32
                           registers in two banks."
        }

        cdl_option CYGHWR_HAL_SH_BIGENDIAN {
            display          "Use big-endian mode"
            default_value    { (CYGINT_HAL_SH_PLF_BIGENDIAN_DEFAULT != 0) \
                                ? 1 : 0 }
            description      "
                Use the CPU in big-endian mode."
        }

        cdl_interface CYGINT_HAL_SH_PLF_BIGENDIAN_DEFAULT {
            display          "Platform wants default BE"
            no_define
            description      "
                This interface is set by the platform, not by the user,
                to indicate what the default endianness should be."
        }
    }
    
    cdl_component CYGPKG_HAL_SH_CACHE {
        display          "Cache controls"
        flavor     none
        no_define
        description      "
            Initial cache settings can be specified using these options."

        cdl_option CYGHWR_HAL_SH_CACHE_ENABLE {
            display       "Enable cache on startup"
            default_value 1
            description "
                Controls whether caches should be enabled on startup."
        }
    }

    # Real-time clock/counter specifics
    cdl_component CYGNUM_HAL_RTC_CONSTANTS {
        display       "Real-time clock constants."
        description   "
            The NUMERATOR divided by the DENOMINATOR gives the number of
            nanoseconds per tick. The PERIOD is the divider to be programmed
            into a hardware timer that is driven from an appropriate hardware
            clock, such that the timer overflows once per tick (normally
            generating a CPU interrupt to mark the end of a tick). The tick
            rate is typically 100Hz.
            The SH HAL uses TMU counter 0 for driving the real-time
            clock."
        flavor        none
    
        cdl_option CYGNUM_HAL_RTC_NUMERATOR {
            display       "Real-time clock numerator"
            flavor        data
            default_value 1000000000
        }
        cdl_option CYGNUM_HAL_RTC_DENOMINATOR {
            display       "Real-time clock denominator"
            flavor        data
            default_value 100
        }
        cdl_option CYGNUM_HAL_RTC_PERIOD {
            display       "Real-time clock period"
            flavor        data
            default_value { CYGHWR_HAL_SH_ONCHIP_PERIPHERAL_SPEED/CYGNUM_HAL_RTC_DENOMINATOR / CYGHWR_HAL_SH_RTC_PRESCALE }
        }
    }

    cdl_option CYGBLD_LINKER_SCRIPT {
        display "Linker script"
        flavor data
        no_define
        calculated  { "src/sh.ld" }
    }

    cdl_option CYGPKG_HAL_SH_TESTS {
        display "SH tests"
        flavor  data
        no_define
        calculated { "tests/intr0" }
        description   "
            This option specifies the set of tests for the SH HAL."
    }

    cdl_component CYGBLD_HAL_SH_BSP_SYSCALL {
        display       "Build BSP syscall support file"
        default_value 1
        active_if     CYGSEM_REDBOOT_BSP_SYSCALLS
        description   "
            When the RedBoot option for supporting syscalls is enabled,
            build the SH architecture support file."

        compile       hal_syscall.c
    }

    cdl_component CYGPKG_REDBOOT_SH_OPTIONS {
        display       "Redboot for SuperH options"
        flavor        none
        no_define
        parent        CYGPKG_REDBOOT
        active_if     CYGPKG_REDBOOT
        description   "
            This option lists the target's requirements for a valid Redboot
            configuration."

        cdl_component CYGSEM_REDBOOT_SH_LINUX_BOOT {
            active_if      CYGBLD_BUILD_REDBOOT_WITH_EXEC
            display        "Support booting Linux via RedBoot"
            flavor         bool
            default_value  1
            description    "
               This option enables RedBoot to support booting of a Linux kernel."
            compile -library=libextras.a redboot_linux_exec.c

            cdl_option CYGDAT_REDBOOT_SH_LINUX_BOOT_ENTRY {
                display        "Default kernel entry address"
                flavor         data
                default_value  0x8c102000
            }

            cdl_option CYGDAT_REDBOOT_SH_LINUX_BOOT_BASE_ADDR {
                display        "Default parameter block address"
                flavor         data
                default_value  0x8c101000
            }

            cdl_option CYGDAT_REDBOOT_SH_LINUX_BOOT_MOUNT_RDONLY {
                display        "Default MOUNT_RDONLY"
                flavor         data
                default_value  0
            }

            cdl_option CYGDAT_REDBOOT_SH_LINUX_BOOT_RAMDISK_FLAGS {
                display        "Default RAMDISK_FLAGS"
                flavor         data
                default_value  0
            }

            cdl_option CYGDAT_REDBOOT_SH_LINUX_BOOT_ORIG_ROOT_DEV {
                display        "Default ORIG_ROOT_DEV"
                flavor         data
                default_value  0
            }

            cdl_option CYGDAT_REDBOOT_SH_LINUX_BOOT_LOADER_TYPE {
                display        "Default LOADER_TYPE"
                flavor         data
                default_value  0
            }

            cdl_option CYGDAT_REDBOOT_SH_LINUX_BOOT_INITRD_START {
                display        "Default INITRD_START"
                flavor         data
                default_value  0
            }

            cdl_option CYGDAT_REDBOOT_SH_LINUX_BOOT_INITRD_SIZE {
                display        "Default INITRD_SIZE"
                flavor         data
                default_value  0
            }

            cdl_option CYGDAT_REDBOOT_SH_LINUX_BOOT_COMMAND_LINE {
                display        "Default COMMAND_LINE"
                flavor         data
                default_value  { "console=ttySC1,38400" }
            }
        }
    }
}