Subversion Repositories openrisc

//=============================================================================
//
//      smsc37c93x.c
//
//      Init code for SMSC 37C93x super IO controller
//
//=============================================================================
// ####ECOSGPLCOPYRIGHTBEGIN####                                            
// -------------------------------------------                              
// This file is part of eCos, the Embedded Configurable Operating System.   
// Copyright (C) 1998, 1999, 2000, 2001, 2002 Free Software Foundation, Inc.
//
// eCos is free software; you can redistribute it and/or modify it under    
// the terms of the GNU General Public License as published by the Free     
// Software Foundation; either version 2 or (at your option) any later      
// version.                                                                 
//
// eCos is distributed in the hope that it will be useful, but WITHOUT      
// ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or    
// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License    
// for more details.                                                        
//
// You should have received a copy of the GNU General Public License        
// along with eCos; if not, write to the Free Software Foundation, Inc.,    
// 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.            
//
// As a special exception, if other files instantiate templates or use      
// macros or inline functions from this file, or you compile this file      
// and link it with other works to produce a work based on this file,       
// this file does not by itself cause the resulting work to be covered by   
// the GNU General Public License. However the source code for this file    
// must still be made available in accordance with section (3) of the GNU   
// General Public License v2.                                               
//
// This exception does not invalidate any other reasons why a work based    
// on this file might be covered by the GNU General Public License.         
// -------------------------------------------                              
// ####ECOSGPLCOPYRIGHTEND####                                              
//=============================================================================
//#####DESCRIPTIONBEGIN####
//
// Author(s):   jskov
// Contributors:jskov
// Date:        2001-05-30
// Description: Init code for SMSC 37C93x super IO controller
//
//####DESCRIPTIONEND####
//
//=============================================================================
 
#include <pkgconf/hal.h>
#include CYGBLD_HAL_PLATFORM_H
 
#include <cyg/hal/hal_arch.h>           // SAVE/RESTORE GP macros
#include <cyg/hal/hal_io.h>             // IO macros
#include <cyg/hal/hal_intr.h>           // interrupt vectors
 
 
// From page 137+ in SMSC-37C93x.pdf
#define SMSC_CONFIG              0xb04007e0
#define SMSC_CONFIG_DATA         0xb04007e2
 
#define SMSC_CONFIG_DEV          0x0700
#define SMSC_CONFIG_POWER        0x2200
#define SMSC_CONFIG_ACTIVATE     0x3000
#define SMSC_CONFIG_ENTER        0x5500
#define SMSC_CONFIG_BASE_HIGH    0x6000
#define SMSC_CONFIG_BASE_LOW     0x6100
#define SMSC_CONFIG_IRQ          0x7000
#define SMSC_CONFIG_EXIT         0xaa00
#define SMSC_CONFIG_MODE         0xf000
 
#define SMSC_CONFIG_DEV_COM1     0x0400
#define SMSC_CONFIG_DEV_COM2     0x0500
 
#define SMSC_CONFIG_MODE_HIGH    0x0200
 
#define SMSC_CONFIG_ACTIVATE_ENABLE 0x0100
 
#define SMSC_CONFIG_POWER_COM1   0x1000
#define SMSC_CONFIG_POWER_COM2   0x2000
 
void
cyg_hal_init_superIO(void)
{
    // Note: two writes unlike the 37m81x!
    HAL_WRITE_UINT16(SMSC_CONFIG, SMSC_CONFIG_ENTER);
    HAL_WRITE_UINT16(SMSC_CONFIG, SMSC_CONFIG_ENTER);
 
    // Power ON COM1
    HAL_WRITE_UINT16(SMSC_CONFIG_POWER, SMSC_CONFIG_POWER_COM1);
 
    // Configure and enable COM1
    HAL_WRITE_UINT16(SMSC_CONFIG, SMSC_CONFIG_DEV);
    HAL_WRITE_UINT16(SMSC_CONFIG_DATA, SMSC_CONFIG_DEV_COM1);
 
    HAL_WRITE_UINT16(SMSC_CONFIG, SMSC_CONFIG_BASE_HIGH);
    HAL_WRITE_UINT16(SMSC_CONFIG_DATA, 0x0300);
    HAL_WRITE_UINT16(SMSC_CONFIG, SMSC_CONFIG_BASE_LOW);
    HAL_WRITE_UINT16(SMSC_CONFIG_DATA, 0xf800);
 
    // Select IRQ 4 (see chap 8. Interrupt Controller)
    HAL_WRITE_UINT16(SMSC_CONFIG, SMSC_CONFIG_IRQ);
    HAL_WRITE_UINT16(SMSC_CONFIG_DATA, 4<<8);
 
    HAL_WRITE_UINT16(SMSC_CONFIG, SMSC_CONFIG_MODE);
    HAL_WRITE_UINT16(SMSC_CONFIG_DATA, SMSC_CONFIG_MODE_HIGH);
 
    HAL_WRITE_UINT16(SMSC_CONFIG, SMSC_CONFIG_ACTIVATE);
    HAL_WRITE_UINT16(SMSC_CONFIG_DATA, SMSC_CONFIG_ACTIVATE_ENABLE);
 
    // Exit setup mode
    HAL_WRITE_UINT16(SMSC_CONFIG, SMSC_CONFIG_EXIT);
}
 
//-----------------------------------------------------------------------------
// end of smsc37c93x.c