URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [rtos/] [ecos-3.0/] [packages/] [hal/] [sh/] [sh2/] [current/] [cdl/] [hal_sh_sh2.cdl] - Rev 856
Go to most recent revision | Compare with Previous | Blame | View Log
# ====================================================================
#
# hal_sh_sh2.cdl
#
# SH2 variant HAL package configuration data
#
# ====================================================================
## ####ECOSGPLCOPYRIGHTBEGIN####
## -------------------------------------------
## This file is part of eCos, the Embedded Configurable Operating System.
## Copyright (C) 1998, 1999, 2000, 2001, 2002 Free Software Foundation, Inc.
##
## eCos is free software; you can redistribute it and/or modify it under
## the terms of the GNU General Public License as published by the Free
## Software Foundation; either version 2 or (at your option) any later
## version.
##
## eCos is distributed in the hope that it will be useful, but WITHOUT
## ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
## FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
## for more details.
##
## You should have received a copy of the GNU General Public License
## along with eCos; if not, write to the Free Software Foundation, Inc.,
## 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
##
## As a special exception, if other files instantiate templates or use
## macros or inline functions from this file, or you compile this file
## and link it with other works to produce a work based on this file,
## this file does not by itself cause the resulting work to be covered by
## the GNU General Public License. However the source code for this file
## must still be made available in accordance with section (3) of the GNU
## General Public License v2.
##
## This exception does not invalidate any other reasons why a work based
## on this file might be covered by the GNU General Public License.
## -------------------------------------------
## ####ECOSGPLCOPYRIGHTEND####
# ====================================================================
######DESCRIPTIONBEGIN####
#
# Author(s): jskov
# Original data: jskov
# Contributors:
# Date: 2002-01-09
#
#####DESCRIPTIONEND####
#
# ====================================================================
cdl_package CYGPKG_HAL_SH_SH2 {
display "SH2 variant"
parent CYGPKG_HAL_SH
hardware
include_dir cyg/hal
define_header hal_sh_sh2.h
description "
The SH2 (SuperH 2) variant HAL package provides generic
support for SH2 variant CPUs."
requires CYGHWR_HAL_SH_BIGENDIAN
define_proc {
puts $::cdl_system_header "#define CYGBLD_HAL_VARIANT_H <pkgconf/hal_sh_sh2.h>"
puts $::cdl_header "#define CYGBLD_HAL_VAR_EXCEPTION_MODEL_H <cyg/hal/hal_var_sp.h>"
puts $::cdl_header "#define CYGBLD_HAL_VAR_EXCEPTION_MODEL_INC <cyg/hal/hal_var_sp.inc>"
puts $::cdl_header "#define CYGBLD_HAL_VAR_INTR_MODEL_H <cyg/hal/hal_intr_vecs.h>"
}
compile sh2_sci.c sh2_scif.c var_misc.c variant.S
# The "-o file" is a workaround for CR100958 - without it the
# output file would end up in the source directory under CygWin.
# n.b. grep does not behave itself under win32
make -priority 1 {
<PREFIX>/include/cyg/hal/sh2_offsets.inc : <PACKAGE>/src/var_mk_defs.c
$(CC) $(ACTUAL_CFLAGS) $(INCLUDE_PATH) -Wp,-MD,sh2_offsets.tmp -o var_mk_defs.tmp -S $<
fgrep .equ var_mk_defs.tmp | sed s/#// > $@
@echo $@ ": \\" > $(notdir $@).deps
@tail -n +2 sh2_offsets.tmp >> $(notdir $@).deps
@echo >> $(notdir $@).deps
@rm sh2_offsets.tmp var_mk_defs.tmp
}
# CPU variant supported
cdl_option CYGPKG_HAL_SH_7044 {
display "SH 7044 microprocessor"
parent CYGPKG_HAL_SH_CPU
implements CYGINT_HAL_SH_VARIANT
implements CYGINT_HAL_SH_CPG_T2
default_value 1
no_define
define -file=system.h CYGPKG_HAL_SH_7044
description "
The SH2 7044 microprocessor. This is an embedded part that in
addition to the SH2 processor core has built in peripherals
such as memory controllers, serial ports, and timers/counters.
It also has some amount of flash memory."
define_proc {
puts $cdl_system_header "#define CYGBLD_HAL_CPU_MODULES_H <cyg/hal/mod_7044.h>"
}
}
cdl_option CYGPKG_HAL_SH_7615 {
display "SH 7615 microprocessor"
parent CYGPKG_HAL_SH_CPU
implements CYGINT_HAL_SH_VARIANT
implements CYGINT_HAL_SH_CPG_T1
default_value 0
no_define
define -file=system.h CYGPKG_HAL_SH_7615
description "
The SH2 7615 microprocessor. This is an embedded part that in
addition to the SH2 processor core has built in peripherals
such as memory controllers, serial ports, timers/counters, and
ethernet controller."
define_proc {
puts $cdl_system_header "#define CYGBLD_HAL_CPU_MODULES_H <cyg/hal/mod_7615.h>"
}
}
cdl_component CYGHWR_HAL_SH_CLOCK_SETTINGS {
display "SH on-chip generic clock controls"
description "
The various clocks used by the system are controlled by
these options, some of which are derived from platform
settings."
flavor none
no_define
cdl_interface CYGINT_HAL_SH_CPG_T1 {
display "Clock pulse generator type 1"
}
cdl_interface CYGINT_HAL_SH_CPG_T2 {
display "Clock pulse generator type 2"
}
cdl_option CYGHWR_HAL_SH_FRT_PRESCALE {
display "FRT prescaling"
description "
The free running timer used for
the real-time clock is prescaled by this factor."
flavor data
active_if CYGINT_HAL_SH_CPG_T1
legal_values { 8 32 128 }
default_value 8
}
cdl_option CYGHWR_HAL_SH_CMT_PRESCALE {
display "CMT prescaling"
description "
The Compare Match Timer used for
the real-time clock is prescaled by this factor."
flavor data
active_if CYGINT_HAL_SH_CPG_T2
legal_values { 8 32 128 512 }
default_value 8
}
cdl_option CYGHWR_HAL_SH_RTC_PRESCALE {
display "eCos RTC prescaling"
flavor data
calculated { CYGHWR_HAL_SH_FRT_PRESCALE ? CYGHWR_HAL_SH_FRT_PRESCALE :
CYGHWR_HAL_SH_CMT_PRESCALE ? CYGHWR_HAL_SH_CMT_PRESCALE :
0
}
}
cdl_option CYGHWR_HAL_SH_CLOCK_CKIO {
display "CKIO clock"
no_define
flavor data
# CKIO is either XTAL (input = PLL2 disabled) or PLL2 output
calculated { CYGINT_HAL_SH_CPG_T1 ? (
(CYGHWR_HAL_SH_OOC_CLOCK_MODE >= 4 && CYGHWR_HAL_SH_OOC_CLOCK_MODE <= 6)
? (CYGHWR_HAL_SH_OOC_XTAL)
: CYGHWR_HAL_SH_PLL2_OUTPUT
)
: CYGINT_HAL_SH_CPG_T2 ? (
CYGHWR_HAL_SH_OOC_XTAL
)
: 0 }
}
cdl_option CYGHWR_HAL_SH_PLL1_OUTPUT {
display "The clock output from PLL1"
no_define
flavor data
calculated { CYGHWR_HAL_SH_CLOCK_CKIO * CYGHWR_HAL_SH_OOC_PLL_1 }
}
cdl_option CYGHWR_HAL_SH_PLL2_OUTPUT {
display "The clock output from PLL2"
no_define
flavor data
calculated { CYGINT_HAL_SH_CPG_T1 ? (
(CYGHWR_HAL_SH_OOC_XTAL * CYGHWR_HAL_SH_OOC_PLL_2)
)
: CYGINT_HAL_SH_CPG_T2 ? (
(CYGHWR_HAL_SH_OOC_XTAL * CYGHWR_HAL_SH_OOC_PLL)
)
: 0 }
}
cdl_option CYGHWR_HAL_SH_PROCESSOR_SPEED {
display "Processor clock speed (MHz)"
flavor data
calculated { CYGHWR_HAL_SH_PLL2_OUTPUT / CYGHWR_HAL_SH_OOC_DIVM }
description "
The core (CPU, cache and MMU) speed is computed from
the input clock speed and the divider DIVM setting."
}
cdl_option CYGHWR_HAL_SH_BOARD_SPEED {
display "Platform bus clock speed (MHz)"
flavor data
calculated { CYGHWR_HAL_SH_CLOCK_CKIO }
description "
The platform bus speed is CKIO."
}
cdl_option CYGHWR_HAL_SH_ONCHIP_PERIPHERAL_SPEED {
display "Processor on-chip peripheral clock speed (MHz)"
flavor data
calculated { CYGHWR_HAL_SH_PLL2_OUTPUT / CYGHWR_HAL_SH_OOC_DIVP }
description "
The peripheral speed is computed from the input clock
speed and the divider DIVP setting."
}
}
cdl_option CYGNUM_HAL_SH_SH2_SCI_BAUD_RATE {
display "SCI serial port default baud rate"
flavor data
legal_values { 4800 9600 14400 19200 38400 57600 115200 }
default_value { CYGNUM_HAL_SH_SH2_SCI_BAUD_RATE_DEFAULT ? \
CYGNUM_HAL_SH_SH2_SCI_BAUD_RATE_DEFAULT : 38400 }
description "
This controls the default baud rate used for communicating
with GDB / displaying diagnostic output."
}
cdl_option CYGNUM_HAL_SH_SH2_SCIF_BAUD_RATE {
display "SCIF serial ports default baud rate"
flavor data
legal_values { 4800 9600 14400 19200 38400 57600 115200 }
default_value { CYGNUM_HAL_SH_SH2_SCIF_BAUD_RATE_DEFAULT ? \
CYGNUM_HAL_SH_SH2_SCIF_BAUD_RATE_DEFAULT : 38400 }
description "
This controls the default baud rate used for communicating
with GDB / displaying diagnostic output."
}
cdl_option CYGHWR_HAL_SH_SH2_SCIF_ASYNC_RXTX {
display "SCIF should support async RX/TX"
default_value 0
description "
Some transceiver modes require the transmitter and
receiver to never be enabled at the same time. Enabling
this option lets clients enable async mode."
}
cdl_option CYGHWR_HAL_SH_SH2_SCIF_IRDA_TXRX_COMPENSATION {
display "SCIF IrDA TX/RX switch compensation"
default_value 1
description "
When switching from TX mode to RX mode, the controller causes
a spurious 0xff character to be received at speeds up to
57600 baud. At higher baud rates, more spurious characters
may be received. Enabling this option tries to remove the
spurious characters, but since there are no errors reported
from the controller, it is impossible to do so with any kind
of precision.
Having this option enabled makes RedBoot usable. There is a
matching option in the eCos serial driver controlling a
similar kludge, allowing some eCos serial tests to run.
It is an incomplete kludge however, and for any real use of
the IrDA mode for data transmission, the option should be
disabled, and a protocol capable of handling the spurious
receive characters must be used on top of the driver.
Note that the problem is exaggerated when the baud rate is
changed."
}
cdl_component CYGPKG_HAL_SH_INTERRUPT {
display "Interrupt controls"
flavor none
no_define
description "
Initial interrupt settings can be specified using these option."
cdl_option CYGHWR_HAL_SH_IRQ_HANDLE_SPURIOUS_INTERRUPTS {
display "Handle spurious interrupts"
default_value 0
description "
The SH2 may generate spurious interrupts with INTEVT = 0
when changing the BL bit of the status register. Enabling
this option will cause such interrupts to be identified
very early in the interrupt handler and be ignored. Given
that the SH HAL uses the I-mask to control interrupts,
these spurious interrupts should not occur, and so there
should be no reason to include the special handling code."
}
cdl_option CYGHWR_HAL_SH_IRQ_USE_IRQLVL {
display "Use IRQ0-3 pins as IRL input"
default_value 0
description "
It is possible for the IRQ0-3 pins to be used as IRL
inputs by enabling this option."
}
cdl_option CYGHWR_HAL_SH_IRQ_ENABLE_IRLS_INTERRUPTS {
display "Enable IRLS interrupt pins"
default_value 0
active_if CYGHWR_HAL_SH_IRQ_USE_IRQLVL
description "
IRLS interrupt pins must be specifically
activated. When they are, they will cause the same
type of interrupt as those caused by the IRL pins. If
IRL and IRLS pins signal an interrupt at the same
time, the highest level interrupt will be generated.
Only available on some cores, and probably share pins
with other interrupt sources (PINT) which cannot be
used in this configuration."
}
}
# Cache settings
cdl_option CYGHWR_HAL_SH_CACHE_MODE {
display "Select cache mode set at startup"
parent CYGPKG_HAL_SH_CACHE
default_value { "WRITE_BACK" }
legal_values { "WRITE_BACK" "WRITE_THROUGH" }
flavor data
description "
Controls what cache mode the cache should be put in at
startup. Write-back mode improves
performance by letting dirty data to be kept in the
cache for a period of time, allowing mutiple writes to
the same cache line to be written back to memory in
one memory transaction. In Write-through mode, each
individual write will cause a memory transaction."
}
}
Go to most recent revision | Compare with Previous | Blame | View Log