OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [rtos/] [ecos-3.0/] [packages/] [hal/] [sparc/] [erc32/] [current/] [include/] [hal_diag.h] - Rev 786

Compare with Previous | Blame | View Log

#ifndef CYGONCE_HAL_HAL_DIAG_H
#define CYGONCE_HAL_HAL_DIAG_H
 
/*=============================================================================
//
//      hal_diag.h
//
//      HAL Support for Kernel Diagnostic Routines
//
//=============================================================================
// ####ECOSGPLCOPYRIGHTBEGIN####                                            
// -------------------------------------------                              
// This file is part of eCos, the Embedded Configurable Operating System.   
// Copyright (C) 1998, 1999, 2000, 2001, 2002 Free Software Foundation, Inc.
//
// eCos is free software; you can redistribute it and/or modify it under    
// the terms of the GNU General Public License as published by the Free     
// Software Foundation; either version 2 or (at your option) any later      
// version.                                                                 
//
// eCos is distributed in the hope that it will be useful, but WITHOUT      
// ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or    
// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License    
// for more details.                                                        
//
// You should have received a copy of the GNU General Public License        
// along with eCos; if not, write to the Free Software Foundation, Inc.,    
// 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.            
//
// As a special exception, if other files instantiate templates or use      
// macros or inline functions from this file, or you compile this file      
// and link it with other works to produce a work based on this file,       
// this file does not by itself cause the resulting work to be covered by   
// the GNU General Public License. However the source code for this file    
// must still be made available in accordance with section (3) of the GNU   
// General Public License v2.                                               
//
// This exception does not invalidate any other reasons why a work based    
// on this file might be covered by the GNU General Public License.         
// -------------------------------------------                              
// ####ECOSGPLCOPYRIGHTEND####                                              
//=============================================================================
//#####DESCRIPTIONBEGIN####
//
// Author(s):   hmt
// Contributors:        hmt
// Date:        1999-01-11
// Purpose:     HAL Support for Kernel Diagnostic Routines
// Description: Diagnostic routines for use during kernel development.
// Usage:       #include <cyg/hal/hal_diag.h>
//
//####DESCRIPTIONEND####
//
//===========================================================================*/
 
#include <pkgconf/hal.h>
 
#include <cyg/infra/cyg_type.h>
 
/*---------------------------------------------------------------------------*/
 
#define CYG_DIAG_USE_ERC32
 
/*---------------------------------------------------------------------------*/
 
#ifdef  CYG_DIAG_USE_ERC32
 
/*---------------------------------------------------------------------------*/
/* Register addresses                                                        */
 
#define SPARC_MEC_UART              (0x01f800e0)
 
/* These must be accessed word-wide to work! */
#define SPARC_MEC_UART_IO( x )      ((cyg_uint32)(x))
 
#define SPARC_MEC_UART_A_RX         ((volatile cyg_uint32 *)(SPARC_MEC_UART + 0))
#define SPARC_MEC_UART_A_TX         ((volatile cyg_uint32 *)(SPARC_MEC_UART + 0))
#define SPARC_MEC_UART_B_RX         ((volatile cyg_uint32 *)(SPARC_MEC_UART + 4))
#define SPARC_MEC_UART_B_TX         ((volatile cyg_uint32 *)(SPARC_MEC_UART + 4))
#define SPARC_MEC_UART_STATUS       ((volatile cyg_uint32 *)(SPARC_MEC_UART + 8))
#define SPARC_MEC_UART_TXAMASK      (0x00004)
#define SPARC_MEC_UART_TXBMASK      (0x40000)
#define SPARC_MEC_UART_RXAMASK      (0x00001)
#define SPARC_MEC_UART_RXBMASK      (0x10000)
 
 
/*---------------------------------------------------------------------------*/
 
#define HAL_DIAG_INIT()
 
#define HAL_DIAG_WRITE_CHAR(_c_)                                            \
{                                                                           \
    if( 1 || _c_ != '\r' )                                                  \
    {                                                                       \
        while( (SPARC_MEC_UART_TXAMASK & *SPARC_MEC_UART_STATUS) == 0 )     \
            continue;                                                       \
        *SPARC_MEC_UART_A_TX = SPARC_MEC_UART_IO(_c_);                      \
    }                                                                       \
}
 
#define HAL_DIAG_READ_CHAR(_c_)                                             \
{                                                                           \
    while( (SPARC_MEC_UART_RXAMASK & *SPARC_MEC_UART_STATUS) == 0 )         \
            continue;                                                       \
    _c_ = (char)*SPARC_MEC_UART_A_TX;                                       \
}
 
#define XHAL_DIAG_WRITE_CHAR(_c_)                                            \
{                                                                           \
    if( _c_ != '\r' )                                                       \
    {                                                                       \
        *SPARC_MEC_UART_A_TX = SPARC_MEC_UART_IO(_c_);                      \
    }                                                                       \
}
 
#define XHAL_DIAG_READ_CHAR(_c_)                                             \
{                                                                           \
    _c_ = (char)*SPARC_MEC_UART_A_TX;                                       \
}
 
#else
/*---------------------------------------------------------------------------*/
/* There is no diagnostic output on SPARC simulator                      */
 
#define HAL_DIAG_INIT()
 
#define HAL_DIAG_WRITE_CHAR(_c_)
 
#define HAL_DIAG_READ_CHAR(_c_) (_c_) = 0
 
#endif
 
/*---------------------------------------------------------------------------*/
/* end of hal_diag.h                                                         */
#endif /* CYGONCE_HAL_HAL_DIAG_H */
 

Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.