Subversion Repositories openrisc

#ifndef CYGONCE_HAL_HAL_INTR_H
#define CYGONCE_HAL_HAL_INTR_H
 
//==========================================================================
//
//      hal_intr.h
//
//      HAL Interrupt and clock support
//
//==========================================================================
// ####ECOSGPLCOPYRIGHTBEGIN####                                            
// -------------------------------------------                              
// This file is part of eCos, the Embedded Configurable Operating System.   
// Copyright (C) 1998, 1999, 2000, 2001, 2002 Free Software Foundation, Inc.
//
// eCos is free software; you can redistribute it and/or modify it under    
// the terms of the GNU General Public License as published by the Free     
// Software Foundation; either version 2 or (at your option) any later      
// version.                                                                 
//
// eCos is distributed in the hope that it will be useful, but WITHOUT      
// ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or    
// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License    
// for more details.                                                        
//
// You should have received a copy of the GNU General Public License        
// along with eCos; if not, write to the Free Software Foundation, Inc.,    
// 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.            
//
// As a special exception, if other files instantiate templates or use      
// macros or inline functions from this file, or you compile this file      
// and link it with other works to produce a work based on this file,       
// this file does not by itself cause the resulting work to be covered by   
// the GNU General Public License. However the source code for this file    
// must still be made available in accordance with section (3) of the GNU   
// General Public License v2.                                               
//
// This exception does not invalidate any other reasons why a work based    
// on this file might be covered by the GNU General Public License.         
// -------------------------------------------                              
// ####ECOSGPLCOPYRIGHTEND####                                              
//==========================================================================
//#####DESCRIPTIONBEGIN####
//
// Author(s):    nickg
// Contributors: nickg, jskov, 
//               gthomas, jlarmour
// Date:         1999-02-16
// Purpose:      Define Interrupt support
// Description:  The macros defined here provide the HAL APIs for handling
//               interrupts and the clock.
//              
// Usage:
//              #include <cyg/hal/hal_intr.h>
//              ...
//              
//
//####DESCRIPTIONEND####
//
//==========================================================================
 
#include <pkgconf/hal.h>
#include <pkgconf/hal_v85x.h>
 
#include <cyg/infra/cyg_type.h>
#include <cyg/hal/hal_io.h>
 
#include <cyg/hal/var_intr.h>
 
//--------------------------------------------------------------------------
// Static data used by HAL
 
// ISR tables
externC CYG_ADDRESS    hal_interrupt_handlers[CYGNUM_HAL_ISR_COUNT];
externC CYG_ADDRWORD   hal_interrupt_data[CYGNUM_HAL_ISR_COUNT];
externC CYG_ADDRESS    hal_interrupt_objects[CYGNUM_HAL_ISR_COUNT];
 
// VSR table
externC CYG_ADDRESS    hal_vsr_table[CYGNUM_HAL_VSR_COUNT];
 
//--------------------------------------------------------------------------
// Default ISR
// The #define is used to test whether this routine exists, and to allow
// us to call it.
 
externC cyg_uint32 hal_default_isr(CYG_ADDRWORD vector, CYG_ADDRWORD data);
 
#define HAL_DEFAULT_ISR hal_default_isr
 
//--------------------------------------------------------------------------
// Interrupt state storage
 
typedef cyg_uint32 CYG_INTERRUPT_STATE;
 
//--------------------------------------------------------------------------
// Interrupt control macros
 
externC cyg_uint32 hal_disable_interrupts(void);
externC void       hal_enable_interrupts(void);
externC void       hal_restore_interrupts(cyg_uint32);
externC cyg_uint32 hal_query_interrupts(void);
 
#ifdef CYGSEM_HAL_NEC_INLINE_INTERRUPT_FUNCTIONS        
#define HAL_DISABLE_INTERRUPTS(_old_)                   \
    CYG_MACRO_START                                     \
    asm volatile (                                      \
        "stsr  PSW,%0;"                                 \
        "di"                                            \
        : "=r"(_old_));                                 \
    CYG_MACRO_END
 
#define HAL_ENABLE_INTERRUPTS()                         \
    CYG_MACRO_START                                     \
    asm volatile (                                      \
        "ei"                                            \
        : );                                            \
    CYG_MACRO_END
 
#define HAL_RESTORE_INTERRUPTS(_old_)           \
    CYG_MACRO_START                             \
    asm volatile (                              \
        "ldsr   %0,PSW"                         \
        :                                       \
        : "r" (_old_));                         \
    CYG_MACRO_END
#else
#define HAL_DISABLE_INTERRUPTS(_old_)   _old_ = hal_disable_interrupts()
#define HAL_ENABLE_INTERRUPTS()         hal_enable_interrupts()
#define HAL_RESTORE_INTERRUPTS(_old_)   hal_restore_interrupts(_old_)
#endif
 
#define HAL_QUERY_INTERRUPTS( _state_ )         _state_ = hal_query_interrupts()
 
//--------------------------------------------------------------------------
// Routine to execute DSRs using separate interrupt stack
 
#ifdef  CYGIMP_HAL_COMMON_INTERRUPTS_USE_INTERRUPT_STACK
externC void hal_interrupt_stack_call_pending_DSRs(void);
#define HAL_INTERRUPT_STACK_CALL_PENDING_DSRS() \
    hal_interrupt_stack_call_pending_DSRs()
 
// these are offered solely for stack usage testing
// if they are not defined, then there is no interrupt stack.
#define HAL_INTERRUPT_STACK_BASE cyg_interrupt_stack_base
#define HAL_INTERRUPT_STACK_TOP  cyg_interrupt_stack
// use them to declare these extern however you want:
//       extern char HAL_INTERRUPT_STACK_BASE[];
//       extern char HAL_INTERRUPT_STACK_TOP[];
// is recommended
#endif
 
//--------------------------------------------------------------------------
// Vector translation.
// For chained interrupts we only have a single vector though which all
// are passed. For unchained interrupts we have a vector per interrupt.
// Note: this hardware does not have/support chained interrupts.
 
//--------------------------------------------------------------------------
// Vector translation.
// For chained interrupts we only have a single vector though which all
// are passed. For unchained interrupts we have a vector per interrupt.
 
#ifndef HAL_TRANSLATE_VECTOR
#if defined(CYGIMP_HAL_COMMON_INTERRUPTS_CHAIN)
#define HAL_TRANSLATE_VECTOR(_vector_,_index_) (_index_) = 0
#else
#define HAL_TRANSLATE_VECTOR(_vector_,_index_) (_index_) = (_vector_-CYGNUM_HAL_ISR_MIN)
#endif
#endif
 
#ifndef HAL_TRANSLATE_VECTOR
#define HAL_TRANSLATE_VECTOR(_vector_,_index_) (_index_) = (_vector_-CYGNUM_HAL_ISR_MIN)
#endif
 
//--------------------------------------------------------------------------
// Interrupt and VSR attachment macros
 
#define HAL_INTERRUPT_IN_USE( _vector_, _state_)                          \
    CYG_MACRO_START                                                       \
    cyg_uint32 _index_;                                                   \
    HAL_TRANSLATE_VECTOR ((_vector_), _index_);                           \
                                                                          \
    if( hal_interrupt_handlers[_index_] == (CYG_ADDRESS)HAL_DEFAULT_ISR ) \
        (_state_) = 0;                                                    \
    else                                                                  \
        (_state_) = 1;                                                    \
    CYG_MACRO_END
 
#define HAL_INTERRUPT_ATTACH( _vector_, _isr_, _data_, _object_ )           \
{                                                                           \
    cyg_uint32 _index_;                                                     \
    HAL_TRANSLATE_VECTOR( _vector_, _index_ );                              \
                                                                            \
    if( hal_interrupt_handlers[_index_] == (CYG_ADDRESS)HAL_DEFAULT_ISR )   \
    {                                                                       \
        hal_interrupt_handlers[_index_] = (CYG_ADDRESS)_isr_;               \
        hal_interrupt_data[_index_] = (CYG_ADDRWORD)_data_;                 \
        hal_interrupt_objects[_index_] = (CYG_ADDRESS)_object_;             \
    }                                                                       \
}
 
#define HAL_INTERRUPT_DETACH( _vector_, _isr_ )                         \
{                                                                       \
    cyg_uint32 _index_;                                                 \
    HAL_TRANSLATE_VECTOR( _vector_, _index_ );                          \
                                                                        \
    if( hal_interrupt_handlers[_index_] == (CYG_ADDRESS)_isr_ )         \
    {                                                                   \
        hal_interrupt_handlers[_index_] = (CYG_ADDRESS)HAL_DEFAULT_ISR; \
        hal_interrupt_data[_index_] = 0;                                \
        hal_interrupt_objects[_index_] = 0;                             \
    }                                                                   \
}
 
#define HAL_VSR_GET( _vector_, _pvsr_ )                 \
    *(_pvsr_) = (void (*)())hal_vsr_table[_vector_];
 
 
#define HAL_VSR_SET( _vector_, _vsr_, _poldvsr_ ) CYG_MACRO_START         \
    if( _poldvsr_ != NULL)                                                \
        *(CYG_ADDRESS *)_poldvsr_ = (CYG_ADDRESS)hal_vsr_table[_vector_]; \
    hal_vsr_table[_vector_] = (CYG_ADDRESS)_vsr_;                         \
CYG_MACRO_END
 
// This is an ugly name, but what it means is: grab the VSR back to eCos
// internal handling, or if you like, the default handler.  But if
// cooperating with GDB and CygMon, the default behaviour is to pass most
// exceptions to CygMon.  This macro undoes that so that eCos handles the
// exception.  So use it with care.
 
externC void __default_exception_vsr(void);
externC void __default_interrupt_vsr(void);
 
#define HAL_VSR_SET_TO_ECOS_HANDLER( _vector_, _poldvsr_ ) CYG_MACRO_START  \
    HAL_VSR_SET( _vector_, _vector_ == CYGNUM_HAL_VECTOR_INTERRUPT          \
                              ? (CYG_ADDRESS)__default_interrupt_vsr        \
                              : (CYG_ADDRESS)__default_exception_vsr,       \
                 _poldvsr_ );                                               \
CYG_MACRO_END
 
//--------------------------------------------------------------------------
// Interrupt controller access
 
externC void hal_interrupt_mask(int);
externC void hal_interrupt_unmask(int);
externC void hal_interrupt_acknowledge(int);
 
#define HAL_INTERRUPT_MASK( _vector_ )          hal_interrupt_mask(_vector_)
#define HAL_INTERRUPT_UNMASK( _vector_ )        hal_interrupt_unmask(_vector_)
#define HAL_INTERRUPT_ACKNOWLEDGE( _vector_ )   hal_interrupt_acknowledge(_vector_)
 
#define HAL_INTERRUPT_CONFIGURE( _vector_, _level_, _up_ )
#define HAL_INTERRUPT_SET_LEVEL( _vector_, _level_ )
 
//--------------------------------------------------------------------------
// Clock control.
 
externC CYG_WORD32 cyg_hal_clock_period;
externC void hal_clock_initialize(cyg_int32);
externC void hal_clock_reset(int, cyg_uint32);
externC cyg_uint32 hal_clock_read(void);
 
#define HAL_CLOCK_INITIALIZE( _period_ )        hal_clock_initialize(_period_)
#define HAL_CLOCK_RESET( _vector_, _period_ )   hal_clock_reset(_vector_,_period_)
#define HAL_CLOCK_READ( _pvalue_ )              *(_pvalue_) = hal_clock_read()
 
#if defined(CYGVAR_KERNEL_COUNTERS_CLOCK_LATENCY) && \
    !defined(HAL_CLOCK_LATENCY)
#define HAL_CLOCK_LATENCY( _pvalue_ )           HAL_CLOCK_READ(_pvalue_)
#endif
 
//--------------------------------------------------------------------------
// Reset.
 
#ifndef HAL_PLATFORM_RESET
extern void hal_reset_board(void);
#define HAL_PLATFORM_RESET()             hal_reset_board()
#define HAL_PLATFORM_RESET_ENTRY         0x00000000
#endif
 
//--------------------------------------------------------------------------
#endif // ifndef CYGONCE_HAL_HAL_INTR_H
// End of hal_intr.h