Subversion Repositories openrisc

<!-- DOCTYPE part  PUBLIC "-//OASIS//DTD DocBook V3.1//EN" -->

<!-- {{{ Banner                         -->

<!-- =============================================================== -->
<!--                                                                 -->
<!--     framebuf.sgml                                               -->
<!--                                                                 -->
<!--     Generic framebuffer documentation.                          -->
<!--                                                                 -->
<!-- =============================================================== -->
<!-- ####ECOSDOCCOPYRIGHTBEGIN####                                   -->
<!-- =============================================================== -->
<!-- Copyright (C) 2008, 2009 Free Software Foundation, Inc.         -->
<!-- This material may be distributed only subject to the terms      -->
<!-- and conditions set forth in the Open Publication License, v1.0  -->
<!-- or later (the latest version is presently available at          -->
<!-- http://www.opencontent.org/openpub/)                            -->
<!-- Distribution of the work or derivative of the work in any       -->
<!-- standard (paper) book form is prohibited unless prior           -->
<!-- permission obtained from the copyright holder                   -->
<!-- =============================================================== -->
<!-- ####ECOSDOCCOPYRIGHTEND####                                     -->
<!-- =============================================================== -->
<!-- #####DESCRIPTIONBEGIN####                                       -->
<!--                                                                 -->
<!-- Author(s):   bartv                                              -->
<!-- Date:        2005/03/29                                         -->
<!--                                                                 -->
<!-- ####DESCRIPTIONEND####                                          -->
<!-- =============================================================== -->

<!-- }}} -->

<part id="io-framebuf"><title>Framebuffer Support</title>

<!-- {{{ Overview                       -->

<refentry id="framebuf">
  <refmeta>
    <refentrytitle>Overview</refentrytitle>
  </refmeta>
  <refnamediv>
    <refname>Overview</refname>
    <refpurpose>eCos Support for Framebuffer Devices</refpurpose>
  </refnamediv>

  <refsect1 id="framebuf-description">
    <title>Description</title>
    <para>
Framebuffer devices are the most common way for a computer system to
display graphical output to users. There are immense variations in the
implementations of such devices. <varname>CYGPKG_IO_FRAMEBUF</varname>
provides an abstraction layer for use by application code and other
packages. It defines an API for manipulating framebuffers, mapping
this API on to functionality provided by the appropriate device
driver. It also defines the interface which such device drivers should
implement. For simple hardware it provides default implementations of
much of this interface, greatly reducing the effort needed to write a
device driver.
    </para>
    <para>
This package does not constitute a graphics library. It does not
implement functionality like drawing text or arbitrary lines, let
alone any kind of windowing system. Instead it operates at the lower
level of individual pixels and blocks of pixels, in addition to
control operations such as hardware initialization. Some applications
may use the framebuffer API directly. Others will instead use a
higher-level graphics library, and it is that library which uses the
framebuffer API.
    </para>
    <para>
It is assumed that users are already familiar with the fundamentals of
computer graphics, and no attempt is made here to explain terms like
display depth, palette or pixel.
    </para>
    <note>
      <para>
This package is work-in-progress. The support for 1bpp, 2bpp and 4bpp
display depths is incomplete. For double-buffered displays the code
does not yet maintain a bounding box of the updated parts of the
display. The package has also been designed to allow for
<link linkend="framebuf-porting-expansion">expansion</link> with new
functionality.
      </para>
    </note>
  </refsect1>

  <refsect1 id="framebuf-configuration">
    <title>Configuration</title>
    <para>
<varname>CYGPKG_IO_FRAMEBUF</varname> only contains
hardware-independent code. It should be complemented by one or more
framebuffer device drivers appropriate for the target platform. These
drivers may be specific to the platform, or they may be more generic
with platform-specific details such as the framebuffer memory base
address provided by the platform HAL. When creating a configuration
for a given target the device driver(s) will always be included
automatically (assuming one has been written or ported). However by
default this driver will be inactive and will not get built, so does
not add any unnecessary size overhead for applications which do not
require graphics. To activate the device driver
<varname>CYGPKG_IO_FRAMEBUF</varname> must be added explicitly to the
configuration, for example using
<command>ecosconfig&nbsp;add&nbsp;framebuf</command>. After this the
full framebuffer API will be available to other packages and to
application code.
    </para>
    <para>
This package contains very few configuration options. Instead it is
left to device drivers or higher-level code to provide appropriate
configurability. One option,
<varname>CYGFUN_IO_FRAMEBUF_INSTALL_DEFAULT_PALETTE</varname>, relates
to the initialization of <link
linkend="framebuf-colour-palette">paletted displays</link>.
    </para>
    <para>
There are a number of calculated and inferred configuration options
and a number of interfaces. These provide information such as whether
or not there is a backlight. The most important one is
<varname>CYGDAT_IO_FRAMEBUF_DEVICES</varname>, which holds a list of
framebuffer identifiers for use with the <link
linkend="framebuf-api">macro-based API</link>. If there is a single
framebuffer device driver which supports one display in either
landscape or portrait mode, the configuration option may hold a value
like <literal> 240x320x8 320x240x8r90</literal>.
    </para>
  </refsect1>

  <refsect1 id="framebuf-api">
    <title>Application Programmer Interfaces</title>
    <para>
Framebuffer devices require a difficult choice between flexibility and
performance. On the one hand the API should be able to support
multiple devices driving separate displays, or a single device
operating in different modes at different times. On the other hand
graphics tends to involve very large amounts of I/O: even something as
simple as drawing a background image can involve setting many
thousands of pixels. Efficiency requires avoiding all possible
overheads including function calls. Instead the API should make
extensive use of macros or inline functions. Ideally details of the
framebuffer device such as the stride would be known constants at
compile-time, giving the compiler as much opportunity as possible to
optimize the code. Clearly this is difficult if multiple framebuffer
devices are in use or if the device mode may get changed at run-time.
    </para>
    <para>
To meet the conflicting requirements the generic framebuffer package
provides two APIs: a fast macro API which requires selecting a single
framebuffer device at compile or configure time; and a slower function
API without this limitation. The two are very similar, for example:
    </para>
    <programlisting width=72>
#include &lt;cyg/io/framebuf.h&gt;

void
clear_screen(cyg_fb* fb, cyg_fb_colour colour)
{
    cyg_fb_fill_block(fb, 0, 0,
                      fb->fb_width, fb->fb_height,
                      colour);
}
    </programlisting>
    <para>
or the equivalent macro version:
    </para>
<programlisting width=72>
#include &lt;cyg/io/framebuf.h&gt;

#define FRAMEBUF 240x320x8

void
clear_screen(cyg_fb_colour colour)
{
    CYG_FB_FILL_BLOCK(FRAMEBUF, 0, 0,
                      CYG_FB_WIDTH(FRAMEBUF), CYG_FB_HEIGHT(FRAMEBUF),
                      colour);
}
    </programlisting>
    <para>
The function-based API works in terms of
<structname>cyg_fb</structname> structures, containing all the
information needed to manipulate the device. Each framebuffer device
driver will export one or more of these structures, for example
<varname>cyg_alaia_fb_240x320x8</varname>, and the driver
documentation should list the variable names. The macro API works in
terms of identifiers such as <literal>240x320x8</literal>, and by a
series of substitutions the main macro gets expanded to the
appropriate device-specific code, usually inline. Again the device
driver documentation should list the supported identifiers. In
addition the configuration option
<varname>CYGDAT_IO_FRAMEBUF_DEVICES</varname> will contain the full
list. By convention the identifier will be specified by a
<literal>#define</literal>'d symbol such as
<varname>FRAMEBUF</varname>, or in the case of graphics libraries by a
configuration option.
    </para>
    <para>
If a platform has multiple framebuffer devices connected to different
displays then there will be separate <structname>cyg_fb</structname>
structures and macro identifiers for each one. In addition some
devices can operate in multiple modes. For example a PC VGA card can
operate in a monochome 640x480 mode, an 8bpp 320x200 mode, and many
other modes, but only one of these can be active at a time. The
different modes are also represented by different
<structname>cyg_fb</structname> structures and identifiers,
effectively treating the modes as separate devices. It is the
responsibility of higher-level code to ensure that only one mode is in
use at a time.
    </para>
    <para>
It is possible to use the macro API with more than one device,
basically by compiling the code twice with different values of
<varname>FRAMEBUF</varname>, taking appropriate care to avoid
identifier name clashes. This gives the higher performance of the
macros at the cost of increased code size.
    </para>
    <para>
All of the framebuffer API, including exports of the device-specific
<structname>cyg_fb</structname> structures, is available through a
single header file <filename>&lt;cyg/io/framebuf.h&gt;</filename>. The
API follows a number of conventions. Coordinates (0,0) correspond to
the top-left corner of the display. All functions and macros which
take a pair of coordinates have x first, y second. For block
operations these coordinates are followed by width, then height.
Coordinates and dimensions use <type>cyg_ucount16</type> variables,
which for any processor should be the most efficient unsigned data
type with at least 16 bits - usually plain unsigned integers. Colours
are identified by <type>cyg_fb_colour</type> variables, again usually
unsigned integers.
    </para>
    <para>
To allow for the different variants of the English language, the API
allows for a number of alternate spellings. Colour and color can be
used interchangeably, so there are data types
<type>cyg_fb_colour</type> and <type>cyg_fb_color</type>, and
functions <function>cyg_fb_make_colour</function> and
<function>cyg_fb_make_color</function>. Similarly gray is accepted as
a variant of grey so the predefined colours
<literal>CYG_FB_DEFAULT_PALETTE_LIGHTGREY</literal> and
<literal>CYG_FB_DEFAULT_PALETTE_LIGHTGRAY</literal> are equivalent.
    </para>
    <para>
The API is split into the following categories:
    </para>
    <variablelist>
      <varlistentry>
        <term><link linkend="framebuf-parameters">parameters</link></term>
        <listitem><para>
getting information about a given framebuffer device such as width,
height and depth. Colours management is complicated so has its own
<link linkend="framebuf-colour">category</link>.
        </para></listitem>
      </varlistentry>
      <varlistentry>
        <term><link linkend="framebuf-control">control</link></term>
        <listitem><para>
operations such as switching the display on and off, and more
device-specific ones such as manipulating the backlight.
        </para></listitem>
      </varlistentry>
      <varlistentry>
        <term><link linkend="framebuf-colour">colours</link></term>
        <listitem><para>
determining the colour format (monochrome, paletted, &hellip),
manipulating the palette, or constructing true colours.
        </para></listitem>
      </varlistentry>
      <varlistentry>
        <term><link linkend="framebuf-drawing">drawing</link></term>
        <listitem><para>
primitives for manipulating pixels and blocks of pixels.
        </para></listitem>
      </varlistentry>
      <varlistentry>
        <term><link linkend="framebuf-iterating">iteration</link></term>
        <listitem><para>
efficiently iterating over blocks of pixels.
        </para></listitem>
      </varlistentry>
    </variablelist>
  </refsect1>

  <refsect1 id="framebuf-threads">
    <title>Thread Safety</title>
    <para>
The framebuffer API never performs any locking so is not thread-safe.
Instead it assumes that higher-level code such as a graphics library
performs any locking that may be needed. Adding a mutex lock and
unlock around every drawing primitive, including pixel writes, would
be prohibitively expensive.
    </para>
    <para>
It is also assumed that the framebuffer will only be updated from
thread context. With most hardware it will also be possible to access
a framebuffer from DSR or ISR context, but this should be avoided in
portable code.
    </para>
  </refsect1>

</refentry>

<!-- }}} -->
<!-- {{{ Framebuffer parameters         -->

<refentry id="framebuf-parameters">
  <refmeta>
    <refentrytitle>Framebuffer Parameters</refentrytitle>
  </refmeta>
  <refnamediv>
    <refname>Parameters</refname>
    <refpurpose>determining framebuffer capabilities</refpurpose>
  </refnamediv>
  <refsynopsisdiv>
    <funcsynopsis>
      <funcsynopsisinfo>
#include &lt;cyg/io/framebuf.h&gt;

typedef struct cyg_fb {
    cyg_ucount16    fb_depth;
    cyg_ucount16    fb_format;
    cyg_ucount16    fb_width;
    cyg_ucount16    fb_height;
#ifdef CYGHWR_IO_FRAMEBUF_FUNCTIONALITY_VIEWPORT
    cyg_ucount16    fb_viewport_width;
    cyg_ucount16    fb_viewport_height;
#endif
    void*           fb_base;
    cyg_ucount16    fb_stride;
    cyg_uint32      fb_flags0;
    &hellip;    
} cyg_fb;
      </funcsynopsisinfo>
      <funcprototype>
        <funcdef>cyg_fb* <function>CYG_FB_STRUCT</function></funcdef>
        <paramdef><parameter>FRAMEBUF</parameter></paramdef>
      </funcprototype>
      <funcprototype>
        <funcdef>cyg_ucount16 <function>CYG_FB_DEPTH</function></funcdef>
        <paramdef><parameter>FRAMEBUF</parameter></paramdef>
      </funcprototype>
      <funcprototype>
        <funcdef>cyg_ucount16 <function>CYG_FB_FORMAT</function></funcdef>
        <paramdef><parameter>FRAMEBUF</parameter></paramdef>
      </funcprototype>
      <funcprototype>
        <funcdef>cyg_ucount16 <function>CYG_FB_WIDTH</function></funcdef>
        <paramdef><parameter>FRAMEBUF</parameter></paramdef>
      </funcprototype>
      <funcprototype>
        <funcdef>cyg_ucount16 <function>CYG_FB_HEIGHT</function></funcdef>
        <paramdef><parameter>FRAMEBUF</parameter></paramdef>
      </funcprototype>
      <funcprototype>
        <funcdef>cyg_ucount16 <function>CYG_FB_VIEWPORT_WIDTH</function></funcdef>
        <paramdef><parameter>FRAMEBUF</parameter></paramdef>
      </funcprototype>
      <funcprototype>
        <funcdef>cyg_ucount16 <function>CYG_FB_VIEWPORT_HEIGHT</function></funcdef>
        <paramdef><parameter>FRAMEBUF</parameter></paramdef>
      </funcprototype>
      <funcprototype>
        <funcdef>void* <function>CYG_FB_BASE</function></funcdef>
        <paramdef><parameter>FRAMEBUF</parameter></paramdef>
      </funcprototype>
      <funcprototype>
        <funcdef>cyg_ucount16 <function>CYG_FB_STRIDE</function></funcdef>
        <paramdef><parameter>FRAMEBUF</parameter></paramdef>
      </funcprototype>
      <funcprototype>
        <funcdef>cyg_uint32 <function>CYG_FB_FLAGS0</function></funcdef>
        <paramdef><parameter>FRAMEBUF</parameter></paramdef>
      </funcprototype>
    </funcsynopsis>
  </refsynopsisdiv>

  <refsect1 id="framebuf-parameters-description">
    <title>Description</title>
    <para>
When developing an application for a specific platform the various
framebuffer parameters such as width and height are known, and the
code can be written accordingly. However when writing code that should
work on many platforms with different framebuffer devices, for example
a graphics library, the code must be able to get these parameters and
adapt.
    </para>
    <para>
Code using the function API can extract the parameters from the
<structname>cyg_fb</structname> structures at run-time. The macro API
provides dedicated macros for each parameter. These do not follow the
usual eCos convention where the result is provided via an extra
argument. Instead the result is returned as normal, and is guaranteed
to be a compile-time constant. This allows code like the following:
    </para>
    <programlisting width=72>
#if CYG_FB_DEPTH(FRAMEBUF) &lt; 8
    &hellip;
#else
    &hellip;
#endif
    </programlisting>
    <para>
or alternatively:
    </para>
    <programlisting width=72>
    if (CYG_FB_DEPTH(FRAMEBUF) < 8) {
        &hellip;
    } else {
        &hellip;
    }
    </programlisting>
    <para>
or:
    </para>
    <programlisting width=72>
    switch (CYG_FB_DEPTH(FRAMEBUF)) {
        case  1 : &hellip; break;
        case  2 : &hellip; break;
        case  4 : &hellip; break;
        case  8 : &hellip; break;
        case 16 : &hellip; break;
        case 32 : &hellip; break;
    }
    </programlisting>
    <para>
In terms of the code actually generated by the compiler these
approaches have much the same effect. The macros expand to a
compile-time constant so unnecessary code can be easily eliminated.
    </para>
    <para>
The available parameters are as follows:
    </para>
    <variablelist>
      <varlistentry>
        <term>depth</term>
        <listitem><para>
The number of bits per pixel or bpp. The common depths are 1, 2, 4, 8,
16 and 32. 
        </para></listitem>
      </varlistentry>
      <varlistentry>
        <term>format</term>
        <listitem><para>
How the pixel values are mapped on to visible <link
linkend="framebuf-colour">colours</link>, for example true colour
or paletted or greyscale.
        </para></listitem>
      </varlistentry>
      <varlistentry>
        <term>width</term>
        <term>height</term>
        <listitem><para>
The number of framebuffer pixels horizontally and vertically.
        </para></listitem>
      </varlistentry>
      <varlistentry>
        <term>viewport width</term>
        <term>viewport height</term>
        <listitem><para>
With some devices the framebuffer height and/or width are greater than
what the display can actually show. The display is said to offer a
viewport into the larger framebuffer. The number of visible pixels is
determined from the viewport width and height. The position of the
viewport is controlled via an <link
linkend="framebuf-control-ioctl-viewport"><function>ioctl</function></link>.
Within a <structname>cyg_fb</structname> structure these fields are
only present if
<varname>CYGHWR_IO_FRAMEBUF_FUNCTIONALITY_VIEWPORT</varname>
is defined, to avoid wasting data space on fields that are unnecessary
for the current platform. For the macro API the viewport macros should only be used
if <literal>CYG_FB_FLAGS0_VIEWPORT</literal> is set for the framebuffer:
        </para>
        <programlisting width=72>
#if (CYG_FB_FLAGS0(FRAMEBUF) &amp; CYG_FB_FLAGS0_VIEWPORT)
    &hellip;
#endif
        </programlisting></listitem>
      </varlistentry>
      <varlistentry>
        <term>base</term>
        <term>stride</term>
        <listitem><para>
For <link linkend="framebuf-parameters-linear">linear</link>
framebuffers these parameters provide the information needed to access
framebuffer memory. The stride is in bytes.
        </para></listitem>
      </varlistentry>
      <varlistentry>
        <term>flags0</term>
        <listitem><para>
This gives further information about the hardware capabilities.
Some of this overlaps with other parameters, especially when it comes
to colour, because it is often easier to test for a single flag than
for a range of colour modes. The current flags are:
        </para>
        <variablelist>
          <varlistentry>
            <term><literal>CYG_FB_FLAGS0_LINEAR_FRAMEBUFFER</literal></term>
            <listitem><para>
Framebuffer memory is organized in a conventional fashion and can be
<link linkend="framebuf-parameters-linear">accessed</link> directly by
higher-level code using the base and stride parameters.
            </para></listitem>
          </varlistentry>
          <varlistentry>
            <term><literal>CYG_FB_FLAGS0_LE</literal></term>
            <listitem><para>
This flag is only relevant for 1bpp, 2bpp and 4bpp devices and
controls how the pixels are organized within each byte. If the flag is
set then the layout is little-endian: for a 1bpp device pixel (0,0)
occupies bit 0 of the first byte of framebuffer memory. The more
common layout is big-endian where pixel (0,0) occupies bit 7 of the
first byte.
            </para></listitem>
          </varlistentry>
          <varlistentry>
            <term><literal>CYG_FB_FLAGS0_TRUE_COLOUR</literal></term>
            <listitem><para>
The framebuffer uses a true colour format where the value of each
pixel directly encodes the red, green and blue intensities. This is
common for 16bpp and 32bpp devices, and is occasionally used for 8bpp
devices. 
            </para></listitem>
          </varlistentry>
          <varlistentry>
            <term><literal>CYG_FB_FLAGS0_PALETTE</literal></term>
            <listitem><para>
The framebuffer uses a palette. A pixel value does not directly encode
the colours, but instead acts as an index into a separate table of
colour values. That table may be read-only or read-write. Paletted
displays are common for 8bpp and some 4bpp displays.
            </para></listitem>
          </varlistentry>
          <varlistentry>
            <term><literal>CYG_FB_FLAGS0_WRITEABLE_PALETTE</literal></term>
            <listitem><para>
The palette is read-write.
            </para></listitem>
          </varlistentry>
          <varlistentry>
            <term><literal>CYG_FB_FLAGS0_DELAYED_PALETTE_UPDATE</literal></term>
            <listitem><para>
Palette updates can be synchronized to a vertical blank, in other
words a brief time period when the display is not being updated,
by using <literal>CYG_FB_UPDATE_VERTICAL_RETRACE</literal> as the last
argument to <function>cyg_fb_write_palette</function> or
<function>CYG_FB_WRITE_PALETTE</function>. With some hardware updating
the palette in the middle of a screen update may result in visual noise.
            </para></listitem>
          </varlistentry>
          <varlistentry>
            <term><literal>CYG_FB_FLAGS0_VIEWPORT</literal></term>
            <listitem><para>
The framebuffer contains more pixels than can be shown on the display.
Instead the display provides a viewport into the framebuffer. An
<link linkend="framebuf-control-ioctl-viewport"><function>ioctl</function></link>
can be used to move the viewport.
            </para></listitem>
          </varlistentry>
          <varlistentry>
            <term><literal>CYG_FB_FLAGS0_DOUBLE_BUFFER</literal></term>
            <listitem><para>
The display does not show the current contents of the framebuffer, so
the results of drawing into the framebuffer are not immediately
visible. Instead higher-level code needs to perform an explicit 
<link linkend="framebuf-drawing-synch">synch</link> operation to
update the display.
            </para></listitem>
          </varlistentry>
          <varlistentry>
            <term><literal>CYG_FB_FLAGS0_PAGE_FLIPPING</literal></term>
            <listitem><para>
The hardware supports two or more pages, each of width*height pixels,
only one of which is visible on the display. This allows higher-level
code to update one page without disturbing what is currently visible.
An <link
linkend="framebuf-control-ioctl-pageflip"><function>ioctl</function></link>
is used to switch the visible page.
            </para></listitem>
          </varlistentry>
          <varlistentry>
            <term><literal>CYG_FB_FLAGS0_BLANK</literal></term>
            <listitem><para>
The display can be <link linkend="framebuf-control-ioctl-blank">blanked</link>
without affecting the framebuffer contents or settings.
            </para></listitem>
          </varlistentry>
          <varlistentry>
            <term><literal>CYG_FB_FLAGS0_BACKLIGHT</literal></term>
            <listitem><para>
There is a backlight which can be <link
linkend="framebuf-control-ioctl-backlight">switched</link> 
on or off. Some hardware provides finer-grained control over the
backlight intensity.
            </para></listitem>
          </varlistentry>
          <varlistentry>
            <term><literal>CYG_FB_FLAGS0_MUST_BE_ON</literal></term>
            <listitem><para>
Often it is desirable to perform some initialization such as clearing
the screen or setting the palette before the display is <link
linkend="framebuf-control-onoff">switched on</link>, to avoid visual
noise. However not all hardware allows this. If this flag is set then
it is possible to access framebuffer memory and the palette before the
<function>cyg_fb_on</function> or <function>CYG_FB_ON</function>
operation. It may also be possible to perform some other operations
such as activating the backlight, but that is implementation-defined.
            </para></listitem>
          </varlistentry>
        </variablelist>
        </listitem>
      </varlistentry>
    </variablelist>
    <para>
To allow for future expansion there are also flags1, flags2, and
flags3 fields. These may get used for encoding additional
<function>ioctl</function> functionality, support for hardware
acceleration, and similar features.
    </para>
  </refsect1>

  <refsect1 id="framebuf-parameters-linear">
    <title>Linear Framebuffers</title>
    <para>
There are drawing primitives for writing and reading individual
pixels. However these involve a certain amount of arithmetic each time
to get from a position to an address within the frame buffer, plus
function call overhead if the function API is used, and this will slow
down graphics operations.
    </para>
    <para>
When the framebuffer device is known at compile-time and the macro API
is used then there are additional macros specifically for <link
linkend="framebuf-iterating">iterating</link> over parts of the frame
buffer. These should prove very efficient for many graphics
operations. However if the device is selected at run-time then the
macros are not appropriate and code may want to manipulate framebuffer
memory directly. This is possible if two conditions are satisfied:
    </para>
    <orderedlist>
      <listitem><para>
The <literal>CYG_FB_FLAGS0_LINEAR_FRAMEBUFFER</literal> flag must be
set. Otherwise framebuffer memory is either not directly accessible or
has a non-linear layout.
      </para></listitem>
      <listitem><para>
The <literal>CYG_FB_FLAGS0_DOUBLE_BUFFER</literal> flag must be clear.
An efficient double buffer synch operation requires knowing what part
of the framebuffer have been updated, and the various drawing
primitives will keep track of this. If higher-level code then starts
manipulating the framebuffer directly the synch operation may perform
only a partial update.
      </para></listitem>
    </orderedlist>
    <para>
The base, stride, depth, width and height parameters, plus the
<literal>CYG_FB_FLAGS0_LE</literal> flag for 1bpp, 2bpp and 4bpp
devices, provide all the information needed to access framebuffer
memory. A linear framebuffer has pixel (0,0) at the base address.
Incrementing y means adding stride bytes to the pointer.
    </para>
    <para>
The base and stride parameters may be set even if
<literal>CYG_FB_FLAGS0_LINEAR_FRAMEBUFFER</literal> is clear. This can
be useful if for example the display is rotated in software from
landscape to portrait mode. However the meaning of these parameters
for non-linear framebuffers is implementation-defined.
    </para>
  </refsect1>
</refentry>

<!-- }}} -->
<!-- {{{ Control Operations             -->

<refentry id="framebuf-control">
  <refmeta>
    <refentrytitle>Framebuffer Control Operations</refentrytitle>
  </refmeta>
  <refnamediv>
    <refname>Control Operations</refname>
    <refpurpose>managing a framebuffer</refpurpose>
  </refnamediv>
  <refsynopsisdiv>
    <funcsynopsis>
      <funcsynopsisinfo>
#include &lt;cyg/io/framebuf.h&gt;
      </funcsynopsisinfo>
      <funcprototype>
        <funcdef>int <function>cyg_fb_on</function></funcdef>
        <paramdef>cyg_fb* <parameter>fbdev</parameter></paramdef>
      </funcprototype>
      <funcprototype>
        <funcdef>int <function>cyg_fb_off</function></funcdef>
        <paramdef>cyg_fb* <parameter>fbdev</parameter></paramdef>
      </funcprototype>
      <funcprototype>
        <funcdef>int <function>cyg_fb_ioctl</function></funcdef>
        <paramdef>cyg_fb* <parameter>fbdev</parameter></paramdef>
        <paramdef>cyg_uint16 <parameter>key</parameter></paramdef>
        <paramdef>void* <parameter>data</parameter></paramdef>
        <paramdef>size_t* <parameter>len</parameter></paramdef>
      </funcprototype>
      <funcprototype>
        <funcdef>int <function>CYG_FB_ON</function></funcdef>
        <paramdef><parameter>FRAMEBUF</parameter></paramdef>
      </funcprototype>
      <funcprototype>
        <funcdef>int <function>CYG_FB_OFF</function></funcdef>
        <paramdef><parameter>FRAMEBUF</parameter></paramdef>
      </funcprototype>
      <funcprototype>
        <funcdef>int <function>CYG_FB_IOCTL</function></funcdef>
        <paramdef><parameter>FRAMEBUF</parameter></paramdef>
        <paramdef>cyg_uint16 <parameter>key</parameter></paramdef>
        <paramdef>void* <parameter>data</parameter></paramdef>
        <paramdef>size_t* <parameter>len</parameter></paramdef>
      </funcprototype> 
    </funcsynopsis>
  </refsynopsisdiv>

  <refsect1 id="framebuf-control-description">
    <title>Description</title>
    <para>
The main operations on a framebuffer are drawing and colour
management. However on most hardware it is also necessary to switch
the display <link linkend="framebuf-control-onoff">on</link> before the
user can see anything, and application code should be able to control
when this happens. There are also miscellaneous operations such as
manipulating the backlight or moving the viewpoint. These do not
warrant dedicated functions, especially since the functionality will
only be available on some hardware, so an <link
linkend="framebuf-control-ioctl"><function>ioctl</function></link>
interface is used.
    </para>
  </refsect1>

  <refsect1 id="framebuf-control-onoff">
    <title>Switching the Display On or Off</title>
    <para>
With most hardware nothing will be visible until there is a call to
<function>cyg_fb_on</function> or an invocation of the
<function>CYG_FB_ON</function> macro. This will initialize the
framebuffer control circuitry, start sending the data signals to the
display unit, and switch on the display if necessary. The exact
initialization semantics are left to the framebuffer device driver. In
some cases the hardware may already be partially or fully initialized
by a static constructor or by boot code that ran before eCos.
    </para>
    <para>
There are some circumstances in which initialization can fail, and
this is indicated by a POSIX error code such as
<literal>ENODEV</literal>. An example would be plug and play hardware
where the framebuffer device is not detected at run-time. Another
example is hardware which can operate in several modes, with separate
<structname>cyg_fb</structname> structures for each mode, if the
hardware is already in use for a different mode. A return value of 0
indicates success.
    </para>
    <para>
Some but not all hardware allows the framebuffer memory and, if
present, the palette to be manipulated before the device is switched
on. That way the user does not see random noise on the screen during
system startup. The flag <literal>CYG_FB_FLAGS0_MUST_BE_ON</literal>
should be checked:
    </para>
    <programlisting width=72>
static void
init_screen(cyg_fb_colour background)
{
    int result;

#if (! (CYG_FB_FLAGS0(FRAMEBUF) &amp; CYG_FB_FLAGS0_MUST_BE_ON))
    CYG_FB_FILL_BLOCK(FRAMEBUF, 0, 0,
                      CYG_FB_WIDTH(FRAMEBUF), CYG_FB_HEIGHT(FRAMEBUF),
                      background);
#endif

    result = CYG_FB_ON(FRAMEBUF);
    if (0 != result) {
        &lt;handle unusual error condition&gt;
    }

#if (CYG_FB_FLAGS0(FRAMEBUF) &amp; CYG_FB_FLAGS0_MUST_BE_ON)
    CYG_FB_FILL_BLOCK(FRAMEBUF, 0, 0,
                      CYG_FB_WIDTH(FRAMEBUF), CYG_FB_HEIGHT(FRAMEBUF),
                      background);
#endif
}
    </programlisting>
    <para>
Obviously if the application has already manipulated framebuffer
memory or the palette but then the <function>cyg_fb_on</function>
operation fails, the system is left in an undefined state.
    </para>
    <para>
It is also possible to switch a framebuffer device off, using the
function <function>cyg_fb_off</function> or the macro
<function>CYG_FB_OFF</function>, although this functionality is rarely
used in embedded systems. The exact semantics of switching a device
off are implementation-defined, but typically it involves shutting
down the display, stopping the data signals to the display, and
halting the control circuitry. The framebuffer memory and the palette
are left in an undefined state, and application code should assume
that both need full reinitializing when the device is switched back
on. Some hardware may also provide a <link
linkend="framebuf-control-ioctl-blank">blank</link> operation which
typically just manipulates the display, not the whole framebuffer
device. Normally <function>cyg_fb_on</function> returns 0. The API
allows for a POSIX error code as with <function>cyg_fb_on</function>,
but switching a device off is not an operation that is likely to fail.
    </para>
    <para>
If a framebuffer device can operate in several modes, represented by
several <structname>cyg_fb</structname> structures and macro
identifiers, then switching modes requires turning the current device
off before turning the next one one.
    </para>
  </refsect1>

  <refsect1 id="framebuf-control-ioctl">
    <title>Miscellaneous Control Operations</title>
    <para>
Some hardware functionality such as an LCD panel backlight is common
but not universal. Supporting these does not warrant dedicated
functions. Instead a catch-all <function>ioctl</function> interface is
provided, with the arguments just passed straight to the device
driver. This approach also allows for future expansion and for
device-specific operations. <function>cyg_fb_ioctl</function> and
<function>CYG_FB_IOCTL</function> take four arguments: a
<structname>cyg_fb</structname> structure or framebuffer identifier; a
key that specifies the operation to be performed; an arbitrary
pointer, which should usually be a pointer to a data structure
specific to the key; and a length field. Key values from 0 to 0x7fff
are generic. Key values from 0x8000 onwards are reserved for the
individual framebuffer device drivers, for device-specific
functionality. The length field should be set to the size of the data
structure, and may get updated by the device driver.
    </para>
    <para>
With most ioctl operations the device can indicate whether or not it
supports the functionality by one of the flags, for example:
    </para>
    <programlisting width=72>
void
backlight_off(cyg_fb* fb)
{
    if (fb->fb_flags0 &amp; CYG_FB_FLAGS0_BACKLIGHT) {
        cyg_fb_ioctl_backlight  new_setting;
        size_t                  len = sizeof(cyg_fb_ioctl_backlight);
        int                     result;

        new_setting.fbbl_current = 0;
        result = cyg_fb_ioctl(fb, CYG_FB_IOCTL_BACKLIGHT_SET,
                              &amp;new_setting, &amp;len);
        if (0 != result) {
            &hellip;
        }
    }
}
    </programlisting>
    <para>
The operation returns zero for success or a POSIX error code on
failure, for example <literal>ENOSYS</literal> if the device driver
does not implement the requested functionality.
    </para>

    <refsect2 id="framebuf-control-ioctl-viewport">
      <title>Viewport</title>
      <programlisting width=72>
# define CYG_FB_IOCTL_VIEWPORT_GET_POSITION     0x0100
# define CYG_FB_IOCTL_VIEWPORT_SET_POSITION     0x0101

typedef struct cyg_fb_ioctl_viewport {
    cyg_ucount16    fbvp_x;     // position of top-left corner of the viewport within
    cyg_ucount16    fbvp_y;     // the framebuffer
    cyg_ucount16    fbvp_when;  // set-only, now or vert retrace
} cyg_fb_ioctl_viewport;
      </programlisting>
      <para>
On some targets the framebuffer device has a higher resolution than
the display. Only a subset of the pixels, the viewport, is currently
visible. Application code can exploit this functionality to achieve
certain effects, for example smooth scrolling. Framebuffers which
support this functionality will have the
<literal>CYG_FB_FLAGS0_VIEWPORT</literal> flag set. The viewport
dimensions are available as additional <link
linkend="framebuf-parameters">parameters</link> to the normal
framebuffer width and height.
      </para>
      <para>
The current position of the viewport can be obtained using an
<literal>CYG_FB_IOCTL_VIEWPORT_GET_POSITION</literal> ioctl operation.
The data argument should be a pointer to a
<structname>cyg_fb_ioctl_viewport</structname> structure. On return
the <structfield>fbvp_x</structfield> and
<structfield>fbvp_y</structfield> fields will be filled in. To move
the viewport use <literal>CYG_FB_IOCTL_VIEWPORT_SET_POSITION</literal>
with <structfield>fbvp_x</structfield> and
<structfield>fbvp_y</structfield> set to the top left corner of the
new viewport within the framebuffer, and
<structfield>fbvp_when</structfield> set to either
<literal>CYG_FB_UPDATE_NOW</literal> or
<literal>CYG_FB_UPDATE_VERTICAL_RETRACE</literal>. If the device
driver cannot easily synchronize to a vertical retrace period then
this last field is ignored.
      </para>
      <programlisting width=72>
void
move_viewport(cyg_fb* fb, int dx, int dy)
{
#ifdef CYGHWR_IO_FRAMEBUF_FUNCTIONALITY_VIEWPORT
    cyg_fb_ioctl_viewport viewport;
    int len = sizeof(cyg_fb_ioctl_viewport);
    int result;

    result = cyg_fb_ioctl(fb, CYG_FB_IOCTL_VIEWPORT_GET_POSITION,
                        &amp;viewport, &amp;len);
    if (result != 0) {
        &hellip;
    }
    if (((int)viewport.fbvp_x + dx) &lt; 0) {
        viewport.fbvp_x = 0;
    } else if ((viewport.fbvp_x + dx + fb-&gt;fb_viewport_width) &gt; fb-&gt;fb_width) {
        viewport.fbvp_x = fb-&gt;fb_width - fb-&gt;fb_viewport_width;
    } else {
        viewport.fbvp_x += dx;
    }
    if (((int)viewport.fbvp_y + dy) &lt; 0) {
        viewport.fbvp_y = 0;
    } else if ((viewport.fbvp_y + dy + fb-&gt;fb_viewport_height) &gt; fb-&gt;fb_height) {
        viewport.fbvp_y = fb-&gt;fb_height - fb-&gt;fb_viewport_height;
    } else {
        viewport.fbvp_y += dy;
    }
    result = cyg_fb_ioctl(fb, CYG_FB_IOCTL_VIEWPORT_SET_POSITION,
                          &amp;viewport, &amp;len);
    if (result != 0) {
        &hellip;
    }
#else
    CYG_UNUSED_PARAM(cyg_fb*, fb);
    CYG_UNUSED_PARAM(int, dx);
    CYG_UNUSED_PARAM(int, dy);
#endif
}
      </programlisting>
      <para>
If an attempt is made to move the viewport beyond the boundaries of
the framebuffer then the resulting behaviour is undefined. Some
hardware may behave reasonably, wrapping around as appropriate, but
portable code cannot assume this. The above code fragment is careful
to clip the viewport to the framebuffer dimensions.
      </para>
    </refsect2>

    <refsect2 id="framebuf-control-ioctl-pageflip">
      <title>Page Flipping</title>
      <programlisting width=72>
# define CYG_FB_IOCTL_PAGE_FLIPPING_GET_PAGES   0x0200
# define CYG_FB_IOCTL_PAGE_FLIPPING_SET_PAGES   0x0201

typedef struct cyg_fb_ioctl_page_flip {
    cyg_uint32      fbpf_number_pages;
    cyg_uint32      fbpf_visible_page;
    cyg_uint32      fbpf_drawable_page;
    cyg_ucount16    fbpf_when;  // set-only, now or vert retrace
} cyg_fb_ioctl_page_flip;
      </programlisting>
      <para>
On some targets the framebuffer has enough memory for several pages,
only one of which is visible at a time. This allows the application
to draw into one page while displaying another. Once drawing is
complete the display is flipped to the newly drawn page, and the
previously displayed page is now available for updating. This
technique is used for smooth animation, especially in games. The flag
<literal>CYG_FB_FLAGS0_PAGE_FLIPPING</literal> indicates support for
this functionality.
      </para>
      <para>
<literal>CYG_FB_IOCTL_PAGE_FLIPPING_GET_PAGES</literal> can be used to
get the current settings of the page flipping support. The data
argument should be a pointer to a
<structname>cyg_fb_ioctl_page_flip</structname> structure. The
resulting <structfield>fbpf_number_pages</structfield> field indicates
the total number of pages available: 2 is common, but more pages are
possible. <structfield>fbpf_visible_page</structfield> gives the page
that is currently visible to the user, and will be between 0 and
(<structfield>fbpf_number_pages</structfield>&nbsp;-&nbsp;1).
Similarly <structfield>fbpf_drawable_page</structfield> gives the page
that is currently visible. It is implementation-defined whether or not
the visible and drawable page can be the same one.
      </para>
      <para>
<literal>CYG_FB_IOCTL_PAGE_FLIPPING_SET_PAGES</literal> can be used to
change the visible and drawable page. The
<structfield>fbpf_number_pages</structfield> field is ignored.
<structfield>fbpf_visible_page</structfield> and
<structfield>fbpf_drawable_page</structfield> give the new settings.
<structfield>fbpf_when</structfield> should be one of
<literal>CYG_FB_UPDATE_NOW</literal> or
<literal>CYG_FB_UPDATE_VERTICAL_RETRACE</literal>, but may be ignored
by some device drivers.
      </para>
      <programlisting width=72>
#if !(CYG_FB_FLAGS0(FRAMEBUF) &amp; CYG_FB_FLAGS0_PAGE_FLIPPING)
# error Current framebuffer device does not support page flipping
#endif

static cyg_uint32 current_visible = 0;

static void
page_flip_init(cyg_fb_colour background)
{
    cyg_fb_ioctl_page_flip flip;
    size_t len = sizeof(cyg_fb_ioctl_page_flip);

    flip.fbpf_visible_page  = current_visible;
    flip.fbpf_drawable_page = 1 - current_visible;
    flip.fbpf_when          = CYG_FB_UPDATE_NOW;
    CYG_FB_IOCTL(FRAMEBUF, CYG_FB_IOCTL_PAGE_FLIPPING_SET_PAGES,
                 &amp;flip, &amp;len);
    CYG_FB_FILL_BLOCK(FRAMEBUF, 0, 0,
                      CYG_FB_WIDTH(FRAMEBUF), CYG_FB_HEIGHT(FRAMEBUF),
                      background);
    flip.fbpf_visible_page  = 1 - current_visible;
    flip.fbpf_drawable_page = current_visible;
    CYG_FB_IOCTL(FRAMEBUF, CYG_FB_IOCTL_PAGE_FLIPPING_SET_PAGES,
                 &amp;flip, &amp;len);
    CYG_FB_FILL_BLOCK(FRAMEBUF, 0, 0,
                      CYG_FB_WIDTH(FRAMEBUF), CYG_FB_HEIGHT(FRAMEBUF),
                      background);
    current_visible = 1 - current_visible;
}

static void
page_flip_toggle(void)
{
    cyg_fb_ioctl_page_flip flip;
    size_t len = sizeof(cyg_fb_ioctl_page_flip);

    flip.fbpf_visible_page  = 1 - current_visible;
    flip.fbpf_drawable_page = current_visible;
    CYG_FB_IOCTL(FRAMEBUF, CYG_FB_IOCTL_PAGE_FLIPPING_SET_PAGES,
                 &amp;flip, &amp;len);
    current_visible = 1 - current_visible;
}
      </programlisting>
      <para>
A page flip typically just changes a couple of pointers within the
hardware and device driver. No attempt is made to synchronize the
contents of the pages, that is left to higher-level code.
      </para>
    </refsect2>

    <refsect2 id="framebuf-control-ioctl-blank">
      <title>Blanking the Screen</title>
      <programlisting width=72>
# define CYG_FB_IOCTL_BLANK_GET                 0x0300
# define CYG_FB_IOCTL_BLANK_SET                 0x0301

typedef struct cyg_fb_ioctl_blank {
    cyg_bool        fbbl_on;
} cyg_fb_ioctl_blank;
      </programlisting>
      <para>
Some hardware allows the display to be switched off or blanked without
shutting down the entire framebuffer device, greatly reducing power
consumption. The current blanking state can be obtained using
<literal>CYG_FB_IOCTL_BLANK_GET</literal> and the state can be updated
using <literal>CYG_FB_IOCTL_BLANK_SET</literal>. The data argument
should be a pointer to a <structname>cyg_fb_ioctl_blank</structname>
structure. Support for this functionality is indicated by the
<literal>CYG_FB_FLAGS0_BLANK</literal> flag.
      </para>
      <programlisting width=72>
static cyg_bool
display_blanked(cyg_fb_* fb)
{
    cyg_fb_ioctl_blank blank;
    size_t len = sizeof(cyg_fb_ioctl_blank);
    
    if (! (fb->fb_flags0 &amp; CYG_FB_FLAGS0_BLANK)) {
        return false;
    }
    (void) cyg_fb_ioctl(fb, CYG_FB_IOCTL_BLANK_GET, &amp;blank, &amp;len);
    return !blank.fbbl_on;
}
      </programlisting>
    </refsect2>

    <refsect2 id="framebuf-control-ioctl-backlight">
      <title>Controlling the Backlight</title>
      <programlisting width=72>
# define CYG_FB_IOCTL_BACKLIGHT_GET             0x0400
# define CYG_FB_IOCTL_BACKLIGHT_SET             0x0401

typedef struct cyg_fb_ioctl_backlight {
    cyg_ucount32    fbbl_current;
    cyg_ucount32    fbbl_max;
} cyg_fb_ioctl_backlight;
      </programlisting>
      <para>
Many LCD panels provide some sort of backlight, making the display
easier to read at the cost of increased power consumption. Support for
this is indicated by the <literal>CYG_FB_FLAGS0_BACKLIGHT</literal>
flag. <literal>CYG_FB_IOCTL_BACKLIGHT_GET</literal> can be used to get
both the current setting and the maximum value. If the maximum is 1
then the backlight can only be switched on or off. Otherwise it is
possible to control the intensity.
      </para>
      <programlisting width=72>
static void
set_backlight_50_percent(void)
{
#if (CYG_FB_FLAGS0(FRAMEBUF) & CYG_FB_FLAGS0_BACKLIGHT)
    cyg_fb_ioctl_backlight backlight;
    size_t len = sizeof(cyg_fb_ioctl_backlight);

    CYG_FB_IOCTL(FRAMEBUF, CYG_FB_IOCTL_BACKLIGHT_GET, &amp;backlight, &amp;len);
    backlight.fbbl_current = (backlight.fbbl_max + 1) >> 1;    
    CYG_FB_IOCTL(FRAMEBUF, CYG_FB_IOCTL_BACKLIGHT_SET, &amp;backlight, &amp;len);
#endif
}
      </programlisting>
    </refsect2>
  </refsect1>

</refentry>

<!-- }}} -->
<!-- {{{ Colour Management              -->

<refentry id="framebuf-colour">
  <refmeta>
    <refentrytitle>Framebuffer Colours</refentrytitle>
  </refmeta>
  <refnamediv>
    <refname>Colours</refname>
    <refpurpose>formats and palette management</refpurpose>
  </refnamediv>
  <refsynopsisdiv>
    <funcsynopsis>
      <funcsynopsisinfo>
#include &lt;cyg/io/framebuf.h&gt;

typedef struct cyg_fb {
    cyg_ucount16    fb_depth;
    cyg_ucount16    fb_format;
    cyg_uint32      fb_flags0;
    &hellip;    
} cyg_fb;

extern const cyg_uint8  cyg_fb_palette_ega[16 * 3];
extern const cyg_uint8  cyg_fb_palette_vga[256 * 3];

#define CYG_FB_DEFAULT_PALETTE_BLACK        0x00
#define CYG_FB_DEFAULT_PALETTE_BLUE         0x01
#define CYG_FB_DEFAULT_PALETTE_GREEN        0x02
#define CYG_FB_DEFAULT_PALETTE_CYAN         0x03
#define CYG_FB_DEFAULT_PALETTE_RED          0x04
#define CYG_FB_DEFAULT_PALETTE_MAGENTA      0x05
#define CYG_FB_DEFAULT_PALETTE_BROWN        0x06
#define CYG_FB_DEFAULT_PALETTE_LIGHTGREY    0x07
#define CYG_FB_DEFAULT_PALETTE_LIGHTGRAY    0x07
#define CYG_FB_DEFAULT_PALETTE_DARKGREY     0x08
#define CYG_FB_DEFAULT_PALETTE_DARKGRAY     0x08
#define CYG_FB_DEFAULT_PALETTE_LIGHTBLUE    0x09
#define CYG_FB_DEFAULT_PALETTE_LIGHTGREEN   0x0A
#define CYG_FB_DEFAULT_PALETTE_LIGHTCYAN    0x0B
#define CYG_FB_DEFAULT_PALETTE_LIGHTRED     0x0C
#define CYG_FB_DEFAULT_PALETTE_LIGHTMAGENTA 0x0D
#define CYG_FB_DEFAULT_PALETTE_YELLOW       0x0E
#define CYG_FB_DEFAULT_PALETTE_WHITE        0x0F
      </funcsynopsisinfo>
      <funcprototype>
        <funcdef>cyg_ucount16 <function>CYG_FB_FORMAT</function></funcdef>
        <paramdef><parameter>framebuf</parameter></paramdef>
      </funcprototype>
      <funcprototype>
        <funcdef>void <function>cyg_fb_read_palette</function></funcdef>
        <paramdef>cyg_fb* <parameter>fb</parameter></paramdef>
        <paramdef>cyg_ucount32 <parameter>first</parameter></paramdef>
        <paramdef>cyg_ucount32 <parameter>count</parameter></paramdef>
        <paramdef>void* <parameter>data</parameter></paramdef>
      </funcprototype>
      <funcprototype>
        <funcdef>void <function>cyg_fb_write_palette</function></funcdef>
        <paramdef>cyg_fb* <parameter>fb</parameter></paramdef>
        <paramdef>cyg_ucount32 <parameter>first</parameter></paramdef>
        <paramdef>cyg_ucount32 <parameter>count</parameter></paramdef>
        <paramdef>const void* <parameter>data</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>when</parameter></paramdef>
      </funcprototype>
      <funcprototype>
        <funcdef>cyg_fb_colour <function>cyg_fb_make_colour</function></funcdef>
        <paramdef>cyg_fb* <parameter>fb</parameter></paramdef>
        <paramdef>cyg_ucount8 <parameter>r</parameter></paramdef>
        <paramdef>cyg_ucount8 <parameter>g</parameter></paramdef>
        <paramdef>cyg_ucount8 <parameter>b</parameter></paramdef>
      </funcprototype>
      <funcprototype>
        <funcdef>void <function>cyg_fb_break_colour</function></funcdef>
        <paramdef>cyg_fb* <parameter>fb</parameter></paramdef>
        <paramdef>cyg_fb_colour <parameter>colour</parameter></paramdef>
        <paramdef>cyg_ucount8* <parameter>r</parameter></paramdef>
        <paramdef>cyg_ucount8* <parameter>g</parameter></paramdef>
        <paramdef>cyg_ucount8* <parameter>b</parameter></paramdef>
      </funcprototype>
      <funcprototype>
        <funcdef>void <function>CYG_FB_READ_PALETTE</function></funcdef>
        <paramdef><parameter>FRAMEBUF</parameter></paramdef>
        <paramdef>cyg_ucount32 <parameter>first</parameter></paramdef>
        <paramdef>cyg_ucount32 <parameter>count</parameter></paramdef>
        <paramdef>void* <parameter>data</parameter></paramdef>
      </funcprototype>
      <funcprototype>
        <funcdef>void <function>CYG_FB_WRITE_PALETTE</function></funcdef>
        <paramdef><parameter>FRAMEBUF</parameter></paramdef>
        <paramdef>cyg_ucount32 <parameter>first</parameter></paramdef>
        <paramdef>cyg_ucount32 <parameter>count</parameter></paramdef>
        <paramdef>const void* <parameter>data</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>when</parameter></paramdef>
      </funcprototype>
      <funcprototype>
        <funcdef>cyg_fb_colour <function>CYG_FB_MAKE_COLOUR</function></funcdef>
        <paramdef><parameter>FRAMEBUF</parameter></paramdef>
        <paramdef>cyg_ucount8 <parameter>r</parameter></paramdef>
        <paramdef>cyg_ucount8 <parameter>g</parameter></paramdef>
        <paramdef>cyg_ucount8 <parameter>b</parameter></paramdef>
      </funcprototype>
      <funcprototype>
        <funcdef>void <function>CYG_FB_BREAK_COLOUR</function></funcdef>
        <paramdef><parameter>FRAMEBUF</parameter></paramdef>
        <paramdef>cyg_fb_colour <parameter>colour</parameter></paramdef>
        <paramdef>cyg_ucount8* <parameter>r</parameter></paramdef>
        <paramdef>cyg_ucount8* <parameter>g</parameter></paramdef>
        <paramdef>cyg_ucount8* <parameter>b</parameter></paramdef>
      </funcprototype>
    </funcsynopsis>
  </refsynopsisdiv>

  <refsect1 id="framebuf-colour-description">
    <title>Description</title>
    <para>
Managing colours can be one of the most difficult aspects of writing
graphics code, especially if that code is intended to be portable to
many different platforms. Displays can vary from 1bpp monochrome, via
2bpp and 4bpp greyscale, through 4bpp and 8bpp paletted, and up to
16bpp and 32bpp true colour - and those are just the more common
scenarios. The various <link linkend="framebuf-drawing">drawing
primitives</link> like <function>cyg_fb_write_pixel</function> work in
terms of <type>cyg_fb_colour</type> values, usually an unsigned
integer. Exactly how the hardware interprets a
<type>cyg_fb_colour</type> depends on the format.
    </para>
  </refsect1>

  <refsect1 id="framebuf-colour-formats">
    <title>Colour Formats</title>
    <para>
There are a number of ways of finding out how these values will be
interpreted by the hardware:
    </para>
    <orderedlist>
      <listitem><para>
The <literal>CYG_FB_FLAGS0_TRUE_COLOUR</literal> flag is set for all
true colour displays. The format parameter can be examined for more
details but this is not usually necessary. Instead code can use
<link
linkend="framebuf-colour-true"><function>cyg_fb_make_colour</function></link>
or <link
linkend="framebuf-colour-true"><function>CYG_FB_MAKE_COLOUR</function></link>
to construct a <type>cyg_fb_colour</type> value from red, green and
blue components.
      </para></listitem>
      <listitem><para>
If the <literal>CYG_FB_FLAGS0_WRITEABLE_PALETTE</literal> flag is set
then a <type>cyg_fb_colour</type> value is an index into a lookup
table known as the palette, and this table contains red, green and
blue components. The size of the palette is determined by the display
depth, so 16 entries for a 4bpp display and 256 entries for an 8bpp
display. Application code or a graphics library can <link
linkend="framebuf-colour-palette">install</link> its own palette so
can control exactly what colour each <type>cyg_fb_colour</type> value
corresponds to. Alternatively there is support for installing a
default palette.
      </para></listitem>
      <listitem><para>
If <literal>CYG_FB_FLAGS0_PALETTE</literal> is set but
<literal>CYG_FB_FLAGS0_WRITEABLE_PALETTE</literal> is clear then the
hardware uses a fixed palette. There is no easy way for portable
software to handle this case. The palette can be read at run-time,
allowing the application's desired colours to be mapped to whichever
palette entry provides the best match. However normally it will be
necessary to write code specifically for the fixed palette.
      </para></listitem>
      <listitem><para>
Otherwise the display is monochrome or greyscale, depending on the
depth. There are still variations, for example on a monochrome display
colour 0 can be either white or black.
      </para></listitem>
    </orderedlist>
    <para>
As an alternative or to provide additional information, the exact
colour format is provided by the <structfield>fb_format</structfield>
field of the <structname>cyg_fb</structname> structure or by the
<function>CYG_FB_FORMAT</function> macro. It can be one of the
following (more entries may be added in future):
    </para>
    <variablelist>
      <varlistentry>
        <term><literal>CYG_FB_FORMAT_1BPP_MONO_0_BLACK</literal></term>
        <listitem><para>
simple 1bpp monochrome display, with 0 as black or the darker of the
two colours, and 1 as white or the ligher colour.
        </para></listitem>
      </varlistentry>
      <varlistentry>
        <term><literal>CYG_FB_FORMAT_1BPP_MONO_0_WHITE</literal></term>
        <listitem><para>
simple 1bpp monochrome display, with 0 as white or the lighter of the
two colours, and 1 as black or the darker colour.
        </para></listitem>
      </varlistentry>
      <varlistentry>
        <term><literal>CYG_FB_FORMAT_1BPP_PAL888</literal></term>
        <listitem><para>
a 1bpp display which cannot easily be described as monochrome. This is
unusual and not readily supported by portable code. It can happen if
the framebuffer normally runs at a higher depth, for example 4bpp or
8bpp paletted, but is run at only 1bpp to save memory. Hence only two
of the palette entries are used, but can be set to arbitrary colours.
The palette may be read-only or read-write.
        </para></listitem>
      </varlistentry>
      <varlistentry>
        <term><literal>CYG_FB_FORMAT_2BPP_GREYSCALE_0_BLACK</literal></term>
        <listitem><para>
a 2bpp display offering four shades of grey, with 0 as black or the
darkest of the four shades, and 3 as white or the lightest.
        </para></listitem>
      </varlistentry>
      <varlistentry>
        <term><literal>CYG_FB_FORMAT_2BPP_GREYSCALE_0_WHITE</literal></term>
        <listitem><para>
a 2bpp display offering four shades of grey, with 0 as white or the
lightest of the four shades, and 3 as black or the darkest.
        </para></listitem>
      </varlistentry>
      <varlistentry>
        <term><literal>CYG_FB_FORMAT_2BPP_PAL888</literal></term>
        <listitem><para>
a 2bpp display which cannot easily be described as greyscale, for
example providing black, red, blue and white as the four colours.
This is unusual and not readily supported by portable code. It can
happen if the framebuffer normally runs at a higher depth, for example
4bpp or 8bpp paletted, but is run at only 2bpp to save memory. Hence
only four of the palette entries are used, but can be set to arbitrary
colours. The palette may be read-only or read-write.
        </para></listitem>
      </varlistentry>
      <varlistentry>
        <term><literal>CYG_FB_FORMAT_4BPP_GREYSCALE_0_BLACK</literal></term>
        <listitem><para>
a 4bpp display offering sixteen shades of grey, with 0 as black or the
darkest of the 16 shades, and 15 as white or the lighest.
        </para></listitem>
      </varlistentry>
      <varlistentry>
        <term><literal>CYG_FB_FORMAT_4BPP_GREYSCALE_0_WHITE</literal></term>
        <listitem><para>
a 4bpp display offering sixteen shades of grey, with 0 as white or the
lightest of the 16 shades, and 15 as black or the darkest.
        </para></listitem>
      </varlistentry>
      <varlistentry>
        <term><literal>CYG_FB_FORMAT_4BPP_PAL888</literal></term>
        <listitem><para>
a 4bpp paletted display, allowing for 16 different colours on screen
at the same time. The palette may be read-only or read-write.
        </para></listitem>
      </varlistentry>
      <varlistentry>
        <term><literal>CYG_FB_FORMAT_8BPP_PAL888</literal></term>
        <listitem><para>
an 8bpp paletted display, allowing for 256 different colours on screen
at the same time. The palette may be read-only or read-write.
        </para></listitem>
      </varlistentry>
      <varlistentry>
        <term><literal>CYG_FB_FORMAT_8BPP_TRUE_332</literal></term>
        <listitem><para>
an 8bpp true colour display, with three bits (eight levels) of red and
green intensity and two bits (four levels) of blue intensity.
        </para></listitem>
      </varlistentry>
      <varlistentry>
        <term><literal>CYG_FB_FORMAT_16BPP_TRUE_565</literal></term>
        <listitem><para>
a 16bpp true colour display with 5 bits each for red and blue and 6
bits for green.
        </para></listitem>
      </varlistentry>
      <varlistentry>
        <term><literal>CYG_FB_FORMAT_16BPP_TRUE_555</literal></term>
        <listitem><para>
a 16bpp true colour display with five bits each for red, green and
blue, and one unused bit.
        </para></listitem>
      </varlistentry>
      <varlistentry>
        <term><literal>CYG_FB_FORMAT_32BPP_TRUE_0888</literal></term>
        <listitem><para>
a 32bpp true colour display with eight bits each for red, green and
blue and eight bits unused.
        </para></listitem>
      </varlistentry>
    </variablelist>
    <para>
For the true colour formats the format does not define exactly which
bits in the pixel are used for which colour. Instead the
<function>cyg_fb_make_colour</function>
and <function>cyg_fb_break_colour</function> functions or the
equivalent macros should be used to construct or decompose pixel
values.
    </para>
  </refsect1>

  <refsect1 id="framebuf-colour-palette">
    <title>Paletted Displays</title>
    <para>
Palettes are the common way of implementing low-end colour displays.
There are two variants. A read-only palette provides a fixed set of
colours and it is up to application code to use these colours
appropriately. A read-write palette allows the application to select
its own set of colours. Displays providing a read-write palette will
have the <literal>CYG_FB_FLAGS0_WRITEABLE_PALETTE</literal> flag set
in addition to <literal>CYG_FB_FLAGS0_PALETTE</literal>.
    </para>
    <para>
Even if application code can install its own palette, many
applications do not exploit this functionality and instead stick with
a default. There are two standard palettes: the 16-entry PC EGA for
4bpp displays; and the 256-entry PC VGA, a superset of the EGA one,
for 8bpp displays. This package provides the data for both, in the
form of arrays <varname>cyg_fb_palette_ega</varname> and
<varname>cyg_fb_palette_vga</varname>, and 16
<literal>#define</literal>'s such as
<varname>CYG_FB_DEFAULT_PALETTE_BLACK</varname> for the EGA colours
and the first 16 VGA colours. By default device drivers for read-write
paletted displays will install the appropriate default palette, but
this can be suppressed using configuration option
<varname>CYGFUN_IO_FRAMEBUF_INSTALL_DEFAULT_PALETTE</varname>. If a
custom palette will be used then installing the default palette
involves wasting 48 or 768 bytes of memory.
    </para>
    <para>
It should be emphasized that displays vary widely. A colour such
as <varname>CYG_FB_DEFAULT_PALETTE_YELLOW</varname> may appear rather
differently on two different displays, although it should always be
recognizable as yellow. Developers may wish to fine-tune the palette
for specific hardware.
    </para>
    <para>
The current palette can be retrieved using
<function>cyg_fb_read_palette</function> or
<function>CYG_FB_READ_PALETTE</function>. The
<parameter>first</parameter> and <parameter>count</parameter>
arguments control which palette entries should be retrieved. For
example, to retrieve just palette entry 12
<parameter>first</parameter> should be set to 12 and
<parameter>count</parameter> should be set to 1. To retrieve all 256
entries for an 8bpp display, <parameter>first</parameter> should be
set to 0 and <parameter>count</parameter> should be set to 256. The
<parameter>data</parameter> argument should point at an array of
bytes, allowing three bytes for every entry. Byte 0 will contain the red
intensity for the first entry, byte 1 green and byte 2 blue.
    </para>
    <para>
For read-write palettes the palette can be updated using
<function>cyg_fb_write_palette</function> or
<function>CYG_FB_WRITE_PALETTE</function>. The
<parameter>first</parameter> and <parameter>count</parameter> arguments
are the same as for <function>cyg_fb_read_palette</function>, and the
<parameter>data</parameter> argument should point at a suitable byte
array packed in the same way. The <parameter>when</parameter> argument
should be one of <literal>CYG_FB_UPDATE_NOW</literal> or
<literal>CYG_FB_UPDATE_VERTICAL_RETRACE</literal>. With some displays
updating the palette in the middle of an update may result in visual
noise, so synchronizing to the vertical retrace avoids this. However
not all device drivers will support this.
    </para>
    <para>
There is an assumption that palette entries use 8 bits for each of the
red, green and blue colour intensities. This is not always the case,
but the device drivers will perform appropriate adjustments. Some
hardware may use only 6 bits per colour, and the device driver will
ignore the bottom two bits of the supplied intensity values.
Occasionally hardware may use more than 8 bits, in which case the
supplied 8 bits are shifted left appropriately and zero-padded. Device
drivers for such hardware may also provide device-specific routines to
manipulate the palette in a non-portable fashion.
    </para>
  </refsect1>

  <refsect1 id="framebuf-colour-true">
    <title>True Colour displays</title>
    <para>
True colour displays are often easier to manage than paletted
displays. However this comes at the cost of extra memory. A 16bpp true
colour display requires twice as much memory as an 8bpp paletted
display, yet can offer only 32 or 64 levels of intensity for each
colour as opposed to the 256 levels provided by a palette. It also
requires twice as much video memory bandwidth to send all the pixel
data to the display for every refresh, which may impact the
performance of the rest of the system. A 32bpp true colour display
offers the same colour intensities but requires four times the memory
and four times the bandwidth.
    </para>
    <para>
Exactly how the colour bits are organized in
a <type>cyg_fb_colour</type> pixel value is not
defined by the colour format. Instead code should use the
<function>cyg_fb_make_colour</function> or
<function>CYG_FB_MAKE_COLOUR</function> primitives. These take 8-bit
intensity levels for red, green and blue, and return the corresponding
<type>cyg_fb_colour</type>. When using the macro interface the
arithmetic happens at compile-time, for example:
    </para>
    <programlisting width=72>
#define BLACK        CYG_FB_MAKE_COLOUR(FRAMEBUF,   0,   0,   0)
#define WHITE        CYG_FB_MAKE_COLOUR(FRAMEBUF, 255, 255, 255)
#define RED          CYG_FB_MAKE_COLOUR(FRAMEBUF, 255,   0,   0)
#define GREEN        CYG_FB_MAKE_COLOUR(FRAMEBUF,   0, 255,   0)
#define BLUE         CYG_FB_MAKE_COLOUR(FRAMEBUF,   0,   0, 255)
#define YELLOW       CYG_FB_MAKE_COLOUR(FRAMEBUF, 255, 255,  80)
    </programlisting>
    <para>
Displays vary widely so the numbers may need to be adjusted to give
the exact desired colours.
    </para>
    <para>
For symmetry there are also <function>cyg_fb_break_colour</function>
and <function>CYG_FB_BREAK_COLOUR</function> primitives. These take a
<type>cyg_fb_colour</type> value and decompose it into its red, green
and blue components.
    </para>
  </refsect1>

</refentry>

<!-- }}} -->
<!-- {{{ Drawing primitives             -->

<refentry id="framebuf-drawing">
  <refmeta>
    <refentrytitle>Framebuffer Drawing Primitives</refentrytitle>
  </refmeta>
  <refnamediv>
    <refname>Drawing Primitives</refname>
    <refpurpose>updating the display</refpurpose>
  </refnamediv>
  <refsynopsisdiv>
    <funcsynopsis>
      <funcsynopsisinfo>
#include &lt;cyg/io/framebuf.h&gt;
      </funcsynopsisinfo>
      <funcprototype>
        <funcdef>void <function>cyg_fb_write_pixel</function></funcdef>
        <paramdef>cyg_fb* <parameter>fbdev</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>x</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>y</parameter></paramdef>
        <paramdef>cyg_fb_colour <parameter>colour</parameter></paramdef>
      </funcprototype>
      <funcprototype>
        <funcdef>cyg_fb_colour <function>cyg_fb_read_pixel</function></funcdef>
        <paramdef>cyg_fb* <parameter>fbdev</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>x</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>y</parameter></paramdef>
      </funcprototype>
      <funcprototype>
        <funcdef>void <function>cyg_fb_write_hline</function></funcdef>
        <paramdef>cyg_fb* <parameter>fbdev</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>x</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>y</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>len</parameter></paramdef>
        <paramdef>cyg_fb_colour <parameter>colour</parameter></paramdef>
      </funcprototype>
      <funcprototype>
        <funcdef>void <function>cyg_fb_write_vline</function></funcdef>
        <paramdef>cyg_fb* <parameter>fbdev</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>x</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>y</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>len</parameter></paramdef>
        <paramdef>cyg_fb_colour <parameter>colour</parameter></paramdef>
      </funcprototype>
      <funcprototype>
        <funcdef>void <function>cyg_fb_fill_block</function></funcdef>
        <paramdef>cyg_fb* <parameter>fbdev</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>x</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>y</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>width</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>height</parameter></paramdef>
        <paramdef>cyg_fb_colour <parameter>colour</parameter></paramdef>
      </funcprototype>
      <funcprototype>
        <funcdef>void <function>cyg_fb_write_block</function></funcdef>
        <paramdef>cyg_fb* <parameter>fbdev</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>x</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>y</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>width</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>height</parameter></paramdef>
        <paramdef>const void* <parameter>data</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>offset</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>stride</parameter></paramdef>
      </funcprototype>
      <funcprototype>
        <funcdef>void <function>cyg_fb_read_block</function></funcdef>
        <paramdef>cyg_fb* <parameter>fbdev</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>x</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>y</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>width</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>height</parameter></paramdef>
        <paramdef>void* <parameter>data</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>offset</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>stride</parameter></paramdef>
      </funcprototype>
      <funcprototype>
        <funcdef>void <function>cyg_fb_move_block</function></funcdef>
        <paramdef>cyg_fb* <parameter>fbdev</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>x</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>y</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>width</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>height</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>new_x</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>new_y</parameter></paramdef>
      </funcprototype>
      <funcprototype>
        <funcdef>void <function>cyg_fb_synch</function></funcdef>
        <paramdef>cyg_fb* <parameter>fbdev</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>when</parameter></paramdef>
      </funcprototype>
      <funcprototype>
        <funcdef>void <function>CYG_FB_WRITE_PIXEL</function></funcdef>
        <paramdef><parameter>FRAMEBUF</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>x</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>y</parameter></paramdef>
        <paramdef>cyg_fb_colour <parameter>colour</parameter></paramdef>
      </funcprototype>
      <funcprototype>
        <funcdef>cyg_fb_colour <function>CYG_FB_READ_PIXEL</function></funcdef>
        <paramdef><parameter>FRAMEBUF</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>x</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>y</parameter></paramdef>
      </funcprototype>
      <funcprototype>
        <funcdef>void <function>CYG_FB_WRITE_HLINE</function></funcdef>
        <paramdef><parameter>FRAMEBUF</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>x</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>y</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>len</parameter></paramdef>
        <paramdef>cyg_fb_colour <parameter>colour</parameter></paramdef>
      </funcprototype>
      <funcprototype>
        <funcdef>void <function>CYG_FB_WRITE_VLINE</function></funcdef>
        <paramdef><parameter>FRAMEBUF</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>x</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>y</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>len</parameter></paramdef>
        <paramdef>cyg_fb_colour <parameter>colour</parameter></paramdef>
      </funcprototype>
      <funcprototype>
        <funcdef>void <function>CYG_FB_FILL_BLOCK</function></funcdef>
        <paramdef><parameter>FRAMEBUF</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>x</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>y</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>width</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>height</parameter></paramdef>
        <paramdef>cyg_fb_colour <parameter>colour</parameter></paramdef>
      </funcprototype>
      <funcprototype>
        <funcdef>void <function>CYG_FB_WRITE_BLOCK</function></funcdef>
        <paramdef><parameter>FRAMEBUF</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>x</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>y</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>width</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>height</parameter></paramdef>
        <paramdef>const void* <parameter>data</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>offset</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>stride</parameter></paramdef>
      </funcprototype>
      <funcprototype>
        <funcdef>void <function>CYG_FB_READ_BLOCK</function></funcdef>
        <paramdef><parameter>FRAMEBUF</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>x</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>y</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>width</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>height</parameter></paramdef>
        <paramdef>void* <parameter>data</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>offset</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>stride</parameter></paramdef>
      </funcprototype>
      <funcprototype>
        <funcdef>void <function>CYG_FB_MOVE_BLOCK</function></funcdef>
        <paramdef><parameter>FRAMEBUF</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>x</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>y</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>width</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>height</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>new_x</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>new_y</parameter></paramdef>
      </funcprototype>
      <funcprototype>
        <funcdef>void <function>CYG_FB_SYNCH</function></funcdef>
        <paramdef><parameter>FRAMEBUF</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>when</parameter></paramdef>
      </funcprototype>
    </funcsynopsis>
  </refsynopsisdiv>

  <refsect1 id="framebuf-drawing-description">
    <title>Description</title>
    <para>
The eCos framebuffer infrastructure defines a small number of drawing
primitives. These are not intended to provide full graphical
functionality like multiple windows, drawing text in arbitrary fonts,
or anything like that. Instead they provide building blocks for
higher-level graphical toolkits. The available primitives are:
    </para>
    <orderedlist>
      <listitem><para>
Manipulating individual pixels.
      </para></listitem>
      <listitem><para>
Drawing horizontal and vertical lines.
      </para></listitem>
      <listitem><para>
Block fills.
      </para></listitem>
      <listitem><para>
Moving blocks between the framebuffer and main memory.
      </para></listitem>
      <listitem><para>
Moving blocks within the framebuffer.
      </para></listitem>
      <listitem><para>
For double-buffered devices, synchronizing the framebuffer contents
with the actual display.
      </para></listitem>
    </orderedlist>
    <para>
There are two versions for each primitive: a macro and a function. The
macro can be used if the desired framebuffer device is known at
compile-time. Its first argument should be a framebuffer identifier,
for example <literal>320x240x16</literal>, and must be one of the
entries in the configuration option
<varname>CYGDAT_IO_FRAMEBUF_DEVICES</varname>. In the examples below
it is assumed that <varname>FRAMEBUF</varname> has been
<literal>#define</literal>'d to a suitable identifier. The function
can be used if the desired framebuffer device is selected at
run-time. Its first argument should be a pointer to the appropriate
<structname>cyg_fb</structname> structure.
    </para>
    <para>
The pixel, line, and block fill primitives take a
<type>cyg_fb_colour</type> argument. For details of colour handling
see <xref linkend="framebuf-colour">. This argument should have no
more bits set than are appropriate for the display depth. For example
on a 4bpp only the bottom four bits of the colour may be set,
otherwise the behaviour is undefined.
    </para>
    <para>
None of the primitives will perform any run-time error checking,
except possibly for some assertions in a debug build. If higher-level
code provides invalid arguments, for example trying to write a block
which extends past the right hand side of the screen, then the
system's behaviour is undefined. It is the responsibility of
higher-level code to perform clipping to the screen boundaries.
    </para>
  </refsect1>

  <refsect1 id="framebuf-drawing-pixels">
    <title>Manipulating Individual Pixels</title>
    <para>
The primitives for manipulating individual pixels are very simple: a
pixel can be written or read back. The following example shows one way
of drawing a diagonal line:
    </para>
    <programlisting width=72>
void
draw_diagonal(cyg_fb* fb,
              cyg_ucount16 x, cyg_ucount16 y, cyg_ucount16 len,
              cyg_fb_colour colour)
{
    while ( len-- ) {
        cyg_fb_write_pixel(fb, x++, y++, colour);
    }
}
    </programlisting>
    <para>
The next example shows how to draw a horizontal XOR line on a 1bpp
display.
    </para>
    <programlisting width=72>
void
draw_horz_xor(cyg_ucount16 x, cyg_ucount16 y, cyg_ucount16 len)
{
    cyg_fb_colour colour;
    while ( len--) {
        colour = CYG_FB_READ_PIXEL(FRAMEBUF, x, y);
        CYG_FB_WRITE_PIXEL(FRAMEBUF, x++, y, colour ^ 0x01);
    }
}
    </programlisting>
    <para>
The pixel macros should normally be avoided. Determining the correct
location within framebuffer memory corresponding to a set of
coordinates for each pixel is a comparatively expensive operation.
Instead there is direct support for <link
linkend="framebuf-iterating">iterating</link> over parts of the
display, avoiding unnecessary overheads.
    </para>
  </refsect1>

  <refsect1 id="framebuf-drawing-lines">
    <title>Drawing Simple Lines</title>
    <para>
Higher-level graphics code often needs to draw single-pixel horizontal
and vertical lines. If the application involves multiple windows then
these will usually have thin borders around them. Widgets such as
buttons and scrollbars also often have thin borders. 
    </para>
    <para>
<function>cyg_fb_draw_hline</function> and
<function>CYG_FB_DRAW_HLINE</function> draw a horizontal line of the
specified <parameter>colour</parameter>, starting at the
<parameter>x</parameter> and <parameter>y</parameter> coordinates and
extending to the right (increasing x) for a total of
<parameter>len</parameter> pixels. A 50 pixel line starting at
(100,100) will end at (149,100).
    </para>
    <para>
<function>cyg_fb_draw_vline</function> and
<function>CYG_FB_DRAW_VLINE</function> take the same arguments, but
the line extends down (increasing y).
    </para>
    <para>
These primitives do not directly support drawing lines more than one
pixel thick, but <link linkend="framebuf-drawing-fill">block
fills</link> can be used to achieve those. There is no generic support
for drawing arbitrary lines, instead that is left to higher-level
graphics toolkits.
    </para>
  </refsect1>

  <refsect1 id="framebuf-drawing-fill">
    <title>Block Fills</title>
    <para>
Filling a rectangular part of the screen with a solid colour is
another common requirement for higher-level code. The simplest example
is during initialization, to set the display's whole background to a
known value. Block fills are also often used when creating new windows
or drawing the bulk of a simple button or scrollbar widget.
<function>cyg_fb_fill_block</function> and
<function>CYG_FB_FILL_BLOCK</function> provide this functionality.
    </para>
    <para>
The <parameter>x</parameter> and <parameter>y</parameter> arguments
specify the top-left corner of the block to be filled. The
<parameter>width</parameter> and <parameter>height</parameter>
arguments specify the number of pixels affected, a total of
<literal>width&nbsp;*&nbsp;height</literal>. The following example
illustrates part of the process for initializing a framebuffer,
assumed here to have a writeable palette with default settings.
    </para>
    <programlisting width=72>
int
display_init(void)
{
    int result = CYG_FB_ON(FRAMEBUF);
    if ( result ) {
        return result;
    }
    CYG_FB_FILL_BLOCK(FRAMEBUF, 0, 0,
                      CYG_FB_WIDTH(FRAMEBUF), CYG_FB_HEIGHT(FRAMEBUF),
                      CYG_FB_DEFAULT_PALETTE_WHITE);
    &hellip;
}
    </programlisting>
  </refsect1>

  <refsect1 id="framebuf-drawing-block-transfers">
    <title>Copying Blocks between the Framebuffer and Main Memory</title>
    <para>
The block transfer primitives serve two main purposes: drawing images.
and saving parts of the current display to be restored later. For
simple linear framebuffers the primitives just implement copy
operations, with no data conversion of any sort. For non-linear ones
the primitives act as if the framebuffer memory was linear. For
example, consider a 2bpp display where the two bits for a single pixel
are split over two separate bytes in framebuffer memory, or two
planes. For a block write operation the source data should still be
organized with four full pixels per byte, as for a linear framebuffer
of the same depth. and the block write primitive will distribute the
bits over the framebuffer memory as required. Similarly a block read
will combine the appropriate bits from different locations in
framebuffer memory and the resulting memory block will have four full
pixels per byte.
    </para>
    <para>
Because the block transfer primitives perform no data conversion, if
they are to be used for rendering images then those images should be
pre-formatted appropriately for the framebuffer device. For small
images this would normally happen on the host-side as part of the
application build process. For larger images it will usually be better
to store them in a compressed format and decompress them at run-time,
trading off memory for cpu cycles.
    </para>
    <para>
The <parameter>x</parameter> and <parameter>y</parameter> arguments
specify the top-left corner of the block to be transferred, and the
<parameter>width</parameter> and <parameter>height</parameter>
arguments determine the size. The <parameter>data</parameter>,
<parameter>offset</parameter> and <parameter>stride</parameter>
arguments determine the location and layout of the block in main
memory:
    </para>
    <variablelist>
      <varlistentry>
        <term><parameter>data</parameter></term>
        <listitem><para>
The source or destination for the transfer. For 1bpp, 2bpp and 4bpp
devices the data will be packed in accordance with the framebuffer
device's endianness as per the <literal>CYG_FB_FLAGS0_LE</literal>
flag. Each row starts in a new byte so there may be some padding on
the right. For 16bpp and 32bpp the data should be aligned to the
appropriate boundary.
        </para></listitem>
      </varlistentry>
      <varlistentry>
        <term><parameter>offset</parameter></term>
        <listitem><para>
Sometimes only part of an image should be written to the screen. A
vertical offset can be achieved simply by adjusting
<parameter>data</parameter> to point at the appropriate row within the
image instead of the top row. For 8bpp, 16bpp and 32bpp displays
an additional horizontal offset can also be achieved by adjusting
<parameter>data</parameter>. However for 1bpp, 2bpp and 4bpp displays
the starting position within the image may be in the middle of a byte.
Hence the horizontal pixel offset can instead be specified with the
<parameter>offset</parameter> argument.
        </para></listitem>
      </varlistentry>
      <varlistentry>
        <term><parameter>stride</parameter></term>
        <listitem><para>
This indicates the number of bytes between rows. Usually it will be
related to the <parameter>width</parameter>, but there are exceptions
such as when drawing only part of an image.
        </para></listitem>
      </varlistentry>
    </variablelist>
    <para>
The following example fills a 4bpp display with an image held in
memory and already in the right format. If the image is smaller than
the display it will be centered. If the image is larger then the
center portion will fill the entire display.
    </para>
    <programlisting width=72>
void
draw_image(const void* data, int width, int height)
{
    cyg_ucount16 stride;
    cyg_ucount16 x, y, offset;

#if (4 != CYG_FB_DEPTH(FRAMEBUF))
# error This code assumes a 4bpp display
#endif

    stride = (width + 1) &gt;&gt; 1;  // 4bpp to byte stride

    if (width &lt; CYG_FB_WIDTH(FRAMEBUF)) {
        x      = (CYG_FB_WIDTH(FRAMEBUF) - width) &gt;&gt; 1;
        offset = 0;
    } else {
        x      = 0;
        offset = (width - CYG_FB_WIDTH(FRAMEBUF)) &gt;&gt; 1;
        width  = CYG_FB_WIDTH(FRAMEBUF);
    }
    if (height &lt; CYG_FB_HEIGHT(FRAMEBUF)) {
        y      = (CYG_FB_HEIGHT(FRAMEBUF) - height) &gt;&gt; 1;
    } else {
        y      = 0;
        data   = (const void*)((const cyg_uint8*)data +
                 (stride * ((height - CYG_FB_HEIGHT(FRAMEBUF)) &gt;&gt; 1));
        height = CYG_FB_HEIGHT(FRAMEBUF);
    }
    CYG_FB_WRITE_BLOCK(FRAMEBUF, x, y, width, height, data, offset, stride);
}
    </programlisting>
  </refsect1>

  <refsect1 id="framebuf-drawing-block-moves">
    <title>Moving Blocks with the Framebuffer</title>
    <para>
Sometimes it is necessary to move a block of data around the screen,
especially when using a higher-level graphics toolkit that supports
multiple windows. Block moves can be implemented by a read into main
memory followed by a write block, but this is expensive and imposes an
additional memory requirement. Instead the framebuffer infrastructure
provides a generic block move primitive. It will handle all cases
where the source and destination positions overlap. The
<parameter>x</parameter> and <parameter>y</parameter> arguments
specify the top-left corner of the block to be moved, and
<parameter>width</parameter> and <parameter>height</parameter>
determine the block size. <parameter>new_x</parameter> and
<parameter>new_y</parameter> specify the destination. The source data
will remain unchanged except in areas where it overlaps the destination.
    </para>
  </refsect1>

  <refsect1 id="framebuf-drawing-synch">
    <title>Synchronizing Double-Buffered Displays</title>
    <para>
Some framebuffer devices are double-buffered: the framebuffer memory
that gets manipulated by the drawing primitives is separate from what
is actually displayed, and a synch operation is needed to update the
display. In some cases this may be because the actual display memory
is not directly accessible by the processor, for example it may
instead be attached via an SPI bus. Instead drawing happens in a
buffer in main memory, and then this gets transferred over the SPI bus
to the actual display hardware during a synch. In other cases it may
be a software artefact. Some drawing operations, especially ones
involving complex curves, can take a very long time and it may be
considered undesirable to have the user see this happening a few
pixels at a time. Instead the drawing happens in a separate buffer in
main memory and then a double buffer synch just involves a block move
to framebuffer memory. Typically that block move is much faster than
the drawing operation. Obviously there is a cost: an extra area of
memory, and the synch operation itself can consume many cycles and
much of the available memory bandwidth.
    </para>
    <para>
It is the responsibility of the framebuffer device driver to provide
the extra main memory. As far as higher-level code is concerned the
only difference between an ordinary and a double-buffered display is
that with the latter changes do not become visible until a synch
operation has been performed. The framebuffer infrastructure provides
support for a bounding box, keeping track of what has been updated
since the last synch. This means only the updated part of the screen
has to be transferred to the display hardware.
    </para>
    <para>
The synch primitives take two arguments. The first identifies the
framebuffer device. The second should be one of
<literal>CYG_FB_UPDATE_NOW</literal> for an immediate update, or
<literal>CYG_FB_UPDATE_VERTICAL_RETRACE</literal>. Some display
hardware involves a lengthy vertical retrace period every 10-20
milliseconds during which nothing gets drawn to the screen, and
performing the synch during this time means that the end user is
unaware of the operation (assuming the synch can be completed in the
time available). When the hardware supports it, specifying
<literal>CYG_FB_UPDATE_VERTICAL_RETRACE</literal> means that the synch
operation will block until the next vertical retrace takes place and
then perform the update. This may be an expensive operation, for
example it may involve polling a bit in a register. In a
multi-threaded environment it may also be unreliable because the
thread performing the synch may get interrupted or rescheduled in the
middle of the operation. When the hardware does not involve vertical
retraces, or when there is no easy way to detect them, the second
argument to the synch operation will just be ignored and the update
will always happen immediately.
    </para>
    <para>
It is up to higher level code to determine when a synch operation is
appropriate. One approach for typical event-driven code is to perform
the synch at the start of the event loop, just before waiting for an
input or timer event. This may not be optimal. For example if there
two small updates to opposite corners of the screen then it would be
better to make two synch calls with small bounding boxes, rather than
a single synch call with a a large bounding box that requires most of
the framebuffer memory to be updated.
    </para>
    <para>
Leaving out the synch operations leads to portability problems. On
hardware which does not involve double-buffering the synch operation
is a no-op, usually eliminated at compile-time, so invoking synch does
not add any code size or cpu cycle overhead. On double-buffered
hardware, leaving out the synch means the user cannot see what has
been drawn into the framebuffer.
    </para>
  </refsect1>
  
</refentry>

<!-- }}} -->
<!-- {{{ Iteration                      -->

<refentry id="framebuf-iterating">
  <refmeta>
    <refentrytitle>Framebuffer Pixel Manipulation</refentrytitle>
  </refmeta>
  <refnamediv>
    <refname>Pixel Manipulation</refname>
    <refpurpose>iterating over the display</refpurpose>
  </refnamediv>
  <refsynopsisdiv>
    <funcsynopsis>
      <funcsynopsisinfo>
#include &lt;cyg/io/framebuf.h&gt;
      </funcsynopsisinfo>
      <funcprototype>
        <funcdef><function>CYG_FB_PIXEL0_VAR</function></funcdef>
        <paramdef><parameter>FRAMEBUF</parameter></paramdef>
      </funcprototype>
      <funcprototype>
        <funcdef>void <function>CYG_FB_PIXEL0_SET</function></funcdef>
        <paramdef><parameter>FRAMEBUF</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>x</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>y</parameter></paramdef>
      </funcprototype>
      <funcprototype>
        <funcdef>void <function>CYG_FB_PIXEL0_GET</function></funcdef>
        <paramdef><parameter>FRAMEBUF</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>x</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>y</parameter></paramdef>
      </funcprototype>
      <funcprototype>
        <funcdef>void <function>CYG_FB_PIXEL0_ADDX</function></funcdef>
        <paramdef><parameter>FRAMEBUF</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>incr</parameter></paramdef>
      </funcprototype>
      <funcprototype>
        <funcdef>void <function>CYG_FB_PIXEL0_ADDY</function></funcdef>
        <paramdef><parameter>FRAMEBUF</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>incr</parameter></paramdef>
      </funcprototype>
      <funcprototype>
        <funcdef>void <function>CYG_FB_PIXEL0_WRITE</function></funcdef>
        <paramdef><parameter>FRAMEBUF</parameter></paramdef>
        <paramdef>cyg_fb_colour <parameter>colour</parameter></paramdef>
      </funcprototype>
      <funcprototype>
        <funcdef>cyg_fb_colour <function>CYG_FB_PIXEL0_READ</function></funcdef>
        <paramdef><parameter>FRAMEBUF</parameter></paramdef>
      </funcprototype>
      <funcprototype>
        <funcdef>void <function>CYG_FB_PIXEL0_FLUSHABS</function></funcdef>
        <paramdef><parameter>FRAMEBUF</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>x0</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>y0</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>width</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>height</parameter></paramdef>
      </funcprototype>
      <funcprototype>
        <funcdef>void <function>CYG_FB_PIXEL0_FLUSHREL</function></funcdef>
        <paramdef><parameter>FRAMEBUF</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>x0</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>y0</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>dx</parameter></paramdef>
        <paramdef>cyg_ucount16 <parameter>dy</parameter></paramdef>
      </funcprototype>
    </funcsynopsis>
  </refsynopsisdiv>

  <refsect1 id="framebuf-iteration-description">
    <title>Description</title>
    <para>
A common requirement for graphics code is to iterate over parts of the
framebuffer. Drawing text typically involves iterating over a block
of pixels for each character, say 8 by 8, setting each pixel to either
a foreground or background colour. Drawing arbitrary lines typically
involves moving to the start position and then adjusting the x and y
coordinates until the end position is reached, setting a single pixel
each time around the loop. Drawing images which are not in the frame
buffer's native format typically involves iterating over a block of
pixels, from top to bottom and left to right, setting pixels as the
image is decoded.
    </para>
    <para>
Functionality like this can be implemented in several ways. One
approach is to use the pixel write primitive. Typically this involves
some arithmetic to get from the x and y coordinates to a location
within framebuffer memory so it is fairly expensive compared with a
loop which just increments a pointer. Another approach is to write the
data first to a separate buffer in memory and then use a block write
primitive to move it to the framebuffer, but again this involves
overhead. The eCos framebuffer support provides a third approach: a
set of macros specifically for iterating over the frame buffer.
Depending on the operation being performed and the details of the
framebuffer implementation, these macros may be optimal or
near-optimal. Obviously there are limitations. Most importantly the
framebuffer device must be known at compile-time: the compiler can do
a better job optimizing the code if information such as the frame
buffer width are constant. Also each iteration must be performed
within a single variable scope: it is not possible to do some of the
iteration in one function, some in another.
    </para>
  </refsect1>

  <refsect1 id="framebuf-iteration-macros">
    <title>The Pixel Macros</title>
    <para>
All the pixel macros take a framebuffer identifier as their first
argument. This is the same identifier that can be used with the other
macros like <function>CYG_FB_WRITE_HLINE</function> and
<function>CYG_FB_ON</function>, one of the entries in the
configuration option <varname>CYGDAT_IO_FRAMEBUF_DEVICES</varname>.
Using an invalid identifier will result in numerous compile-time error
messages which may bear little resemblance to the original code. In
the examples below it is assumed that <varname>FRAMEBUF</varname> has
been <literal>#define</literal>'d to a suitable identifier.
    </para>
    <para>
Typical use of the pixel macros will look like this:
    </para>
<programlisting width=72>
    CYG_FB_PIXEL0_VAR(FRAMEBUF);
    &hellip;
    CYG_FB_PIXEL0_FLUSHABS(FRAMEBUF, x, y, width, height);
</programlisting>
    <para>
The <literal>VAR</literal> macro will define one or more local
variables to keep track of the current pixel position, as appropriate
to the framebuffer device. The other pixel macros will then use these
variables. For a simple 8bpp linear framebuffer there will be just a
byte pointer. For a 1bpp display there may be several variables: a
byte pointer, a bit index within that byte, and possibly a cached
byte; using a cached value means that the framebuffer may only get
read and written once for every 8 pixels, and the compiler may well
allocate a register for the cached value; on some platforms
framebuffer access will bypass the processor's main cache, so reading
from or writing to framebuffer memory will be slow; reducing the
number of framebuffer accesses may greatly improve performance.
    </para>
    <para>
Because the <literal>VAR</literal> macro defines one or more local
variables it is normally placed at the start of a function or block,
alongside other local variable definitions.
    </para>
    <para>
One the iteration has been completed there should be a
<function>FLUSHABS</function> or <function>FLUSHREL</function> macro.
This serves two purposes. First, if the local variables involve a
dirty cached value or similar state then this will be written back.
Second, for double-buffered displays the macro sets a bounding box for
the part of the screen that has been updated. This allows the double
buffer synch operation to update only the part of the display that has
been modified, without having to keep track of the current bounding
box for every updated pixel. For <literal>FLUSHABS</literal> the
<parameter>x0</parameter> and <parameter>y0</parameter> arguments
specify the top-left corner of the bounding box, which extends for
<parameter>width</parameter> by <parameter>height</parameter> pixels.
For <literal>FLUSHREL</literal> <parameter>x0</parameter> and
<parameter>y0</parameter> still specify the top-left corner, but the
bottom-right corner is now determined from the current pixel position
offset by <parameter>dx</parameter> and <parameter>dy</parameter>.
More specifically, <parameter>dx</parameter> should move the current
horizontal position one pixel to the right of the right-most pixel
modified, such that
<literal>(x&nbsp;+&nbsp;dx)&nbsp;-&nbsp;x0</literal> gives the width
of the bounding box. Similarly <parameter>dy</parameter> should move
the current vertical position one pixel below the bottom-most pixel
modified. In typical code the current pixel position will already
correspond in part or in whole to the bounding box corner, as a
consequence of iterating over the block of memory.
    </para>
    <para>
If a pixel variable has been used only for reading framebuffer memory,
not for modifying it, then it should still be flushed. A
<literal>FLUSHABS</literal> with a width and height of 0 can be used
to indicate that the bounding box is empty. If it is known that the
framebuffer device being used does not support double-buffering then
again it is possible to specify an empty bounding box. Otherwise
portable code should specify a correct bounding box. If the
framebuffer device that ends up being used does not support double
buffering then the relevant macro arguments are eliminated at
compile-time and do not result in any unnecessary code. In addition if
there is no cached value or other state then the whole flush operation
will be a no-op and no code will be generated.
    </para>
    <para>
Failure to perform the flush may result in strange drawing artefacts
on some displays which can be very hard to debug. A
<function>FLUSHABS</function> or <function>FLUSHREL</function> macro
only needs to be invoked once, at the end of the iteration.
    </para>
    <para>
The <literal>SET</literal> macro sets the current position within the
framebuffer. It can be used many times within an iteration. However
it tends to be somewhat more expensive than <literal>ADDX</literal> or
<literal>ADDY</literal>, so usually <literal>SET</literal> is only
executed once at the start of an iteration.
    </para>
<programlisting width=72>
    CYG_FB_PIXEL0_VAR(FRAMEBUF);
    CYG_FB_PIXEL0_SET(FRAMEBUF, x, y);
    &hellip;
    CYG_FB_PIXEL0_FLUSHREL(FRAMEBUF, x, y, 0, 0);
</programlisting>
    <para>
The <literal>GET</literal> macro retrieves the x and y coordinates
corresponding to the current position. It is provided mainly for
symmetry, but can prove useful for debugging.
    </para>
<programlisting width=72>
    CYG_FB_PIXEL0_VAR(FRAMEBUF);
    CYG_FB_PIXEL0_SET(FRAMEBUF, x, y);
    &hellip;
#ifdef DEBUG
    CYG_FB_PIXEL0_GET(FRAMEBUF, new_x, new_y);
    diag_printf("Halfway through: x now %d, y now %d\n", new_x, new_y);
#endif
    &hellip;
    CYG_FB_PIXEL0_FLUSHREL(FRAMEBUF, x, y, 0, 0);
</programlisting>
    <para>
The <literal>ADDX</literal> and <literal>ADDY</literal> macros adjust
the current position. The most common increments are 1 and -1, moving
to the next or previous pixel horizontally or vertically, but any
increment can be used.
    </para>
<programlisting width=72>
    CYG_FB_PIXEL0_VAR(FRAMEBUF);
    CYG_FB_PIXEL0_SET(FRAMEBUF, x, y);
    for (rows = height; rows; rows--) {
        for (columns = width; columns; columns--) {
            &lt;perform operation&gt;
            CYG_FB_PIXEL0_ADDX(FRAMEBUF, 1);
        }
        CYG_FB_PIXEL0_ADDX(FRAMEBUF, -1 * width);
        CYG_FB_PIXEL0_ADDY(FRAMEBUF, 1);
    }
    CYG_FB_PIXEL0_FLUSHREL(FRAMEBUF, x, y, width, 0);
</programlisting>
    <para>
Here the current position is moved one pixel to the right each time
around the inner loop. In the outer loop the position is first moved
back to the start of the current row, then moved one pixel down.
For the final flush the current x position is off by
<literal>width</literal>, but the current y position is already correct.
    </para>
    <para>
The final two macros <literal>READ</literal> and
<literal>WRITE</literal> can be used to examine or update the current
pixel value.
    </para>
<programlisting width=72>
    CYG_FB_PIXEL0_VAR(FRAMEBUF);
    CYG_FB_PIXEL0_SET(FRAMEBUF, x, y);
    for (rows = height; rows; rows--) {
        for (columns = width; columns; columns--) {
            cyg_fb_colour colour = CYG_FB_PIXEL0_READ(FRAMEBUF);
            if (colour == colour_to_replace) {
                CYG_FB_PIXEL0_WRITE(FRAMEBUF, replacement);
            }
            CYG_FB_PIXEL0_ADDX(FRAMEBUF, 1);
        }
        CYG_FB_PIXEL0_ADDX(FRAMEBUF, -1 * width);
        CYG_FB_PIXEL0_ADDY(FRAMEBUF, 1);
    }
    CYG_FB_PIXEL0_FLUSHREL(FRAMEBUF, x, y, width, 0);
</programlisting>
  </refsect1>

  <refsect1 id="framebuf-iteration-other">
    <title>Concurrent Iterations</title>
    <para>
Although uncommon, in some cases application code may need to iterate
over two or more blocks. An example might be an advanced block move
where each copied pixel requires some processing. To support this
there are <literal>PIXEL1</literal>, <literal>PIXEL2</literal> and
<literal>PIXEL3</literal> variants of all the
<literal>PIXEL0</literal> macros. For example:
    </para>
<programlisting width=72>
    CYG_FB_PIXEL0_VAR(FRAMEBUF);
    CYG_FB_PIXEL1_VAR(FRAMEBUF);

    CYG_FB_PIXEL0_SET(FRAMEBUF, dest_x, dest_y_);
    CYG_FB_PIXEL1_SET(FRAMEBUF, source_x, source_y);
    for (rows = height; rows; rows--) {
        for (columns = width; columns; columns--) {
            colour = CYG_FB_PIXEL1_READ(FRAMEBUF);
            &lt;do some processing on colour&gt;
            CYG_FB_PIXEL0_WRITE(FRAMEBUF, colour);
            CYG_FB_PIXEL0_ADDX(FRAMEBUF, 1);
            CYG_FB_PIXEL1_ADDX(FRAMEBUF, 1);
        }
        CYG_FB_PIXEL0_ADDX(FRAMEBUF, -100);
        CYG_FB_PIXEL0_ADDY(FRAMEBUF, 1);
        CYG_FB_PIXEL1_ADDX(FRAMEBUF, -100);
        CYG_FB_PIXEL1_ADDY(FRAMEBUF, 1);
    }

    CYG_FB_PIXEL0_FLUSHABS(FRAMEBUF, source_x, source_y, width, height);
    CYG_FB_PIXEL1_FLUSHABS(FRAMEBUF, 0, 0, 0, 0);  // Only used for reading
</programlisting>
    <para>
The <literal>PIXEL0</literal>, <literal>PIXEL1</literal>,
<literal>PIXEL2</literal> and <literal>PIXEL3</literal> macros all use
different local variables so there are no conflicts. The variable
names also depend on the framebuffer device. If the target has two
displays and two active framebuffer devices then the pixel macros can
be used with the two devices without conflict:
    </para>
<programlisting width=72>
    CYG_FB_PIXEL0_VAR(FRAMEBUF0);
    CYG_FB_PIXEL0_VAR(FRAMEBUF1);
    &hellip;
</programlisting>  
  </refsect1>

</refentry>

<!-- }}} -->
<!-- {{{ Porting                        -->

<refentry id="framebuf-porting">
  <refmeta>
    <refentrytitle>Writing a Framebuffer Device Driver</refentrytitle>
  </refmeta>
  <refnamediv>
    <refname>Porting</refname>
    <refpurpose>writing a new framebuffer device driver</refpurpose>
  </refnamediv>

  <refsect1 id="framebuf-porting-description">
    <title>Description</title>
    <para>
As with most device drivers, the easiest way to write a new
framebuffer package is to start with an existing one. Suitable ones
include the PC VGA mode13 driver, an 8bpp paletted display, and the
ARM iPAQ driver, a 16bpp true colour display. This document only
outlines the process.
    </para>
    <para>
Before writing any code it is necessary to decide how many framebuffer
devices should be provided by the device driver. Each such device
requires a <structname>cyg_fb</structname> structure and appropriate
functions, and an identifier for use with the macro API plus
associated macros. There are no hard rules here. Some device drivers
may support just a single device, others may support many devices
which drive the hardware in different modes or orientations. Optional
functionality such as viewports and page flipping may be supported by
having different <structname>cyg_fb</structname> devices, or by a
number of configuration options which affect a single
<structname>cyg_fb</structname> device. Usually providing multiple
<structname>cyg_fb</structname> structures is harmless because the
unused ones will get eliminated at link-time.
    </para>
  </refsect1>

  <refsect1 id="framebuf-porting-configuration">
    <title>Configuration</title>
    <para>
The CDL for a framebuffer package is usually straightforward. A
framebuffer package should be a hardware package and reside in the
<filename class="directory">devs/framebuf</filename> hierarchy,
further organized by architecture. Generic framebuffer packages, if
any, can go into a <filename class="directory">generic</filename>
subdirectory, and will normally rely on the platform HAL to provide
some platform-specific information such as base addresses. The package
should be part of the target definition and hence loaded
automatically, but should be
<literal>active_if&nbsp;CYGPKG_IO_FRAMEBUF</literal> so that the
driver only gets built if the generic framebuffer support is
explicitly added to the configuration.
    </para>
    <para>
The configuration option <varname>CYGDAT_IO_FRAMEBUF_DEVICES</varname>
should hold all the valid identifiers which can be used as the first
argument for the macro API. This helps application developers to
select the appropriate identifier, and allows higher-level graphics
library packages to check that they have been configured correctly.
This is achieved using something like the following, where
<literal>mode13_320x200x8</literal> is a valid identifier for the PC
VGA driver:
    </para>
    <programlisting width=72>
  requires { is_substr(CYGDAT_IO_FRAMEBUF_DEVICES, " mode13_320x200x8 ") }
    </programlisting>
    <para>
The spaces ensure that the CDL inference engine keeps the identifiers
separate.
    </para>
    <para>
<varname>CYGPKG_IO_FRAMEBUF</varname> contains a number of interfaces
which should be implemented by individual device drivers when
appropriate. This is used to eliminate some code or data structure
fields at compile-time, keeping down memory requirements. The
interfaces are
<varname>CYGHWR_IO_FRAMEBUF_FUNCTIONALITY_32BPP</varname>,
<varname>CYGHWR_IO_FRAMEBUF_FUNCTIONALITY_TRUE_COLOUR</varname>,
<varname>CYGHWR_IO_FRAMEBUF_FUNCTIONALITY_PALETTE</varname>,
<varname>CYGHWR_IO_FRAMEBUF_FUNCTIONALITY_WRITEABLE_PALETTE</varname>,
<varname>CYGHWR_IO_FRAMEBUF_FUNCTIONALITY_DOUBLE_BUFFER</varname>,
and <varname>CYGHWR_IO_FRAMEBUF_FUNCTIONALITY_VIEWPORT</varname>.
For example if a device driver provides a true colour display but
fails to implement the relevant interface then functions like
<function>cyg_fb_make_colour</function> will be no-ops.
    </para>
    <para>
Device drivers for paletted displays should observe the generic
configuration option
<varname>CYGFUN_IO_FRAMEBUF_INSTALL_DEFAULT_PALETTE</varname> and
install either <varname>cyg_fb_palette_ega</varname> or
<varname>cyg_fb_palette_vga</varname> as part of their
<function>cyg_fb_on</function> implementation.
    </para>
  </refsect1>

  <refsect1 id="framebuf-porting-header">
    <title>Exported Header File(s)</title>
    <para>
Each framebuffer device driver should export one or more header files
to <filename class="directory">cyg/io/framebufs</filename>. A custom
build step in <varname>CYGPKG_IO_FRAMEBUF</varname> ensures that
application code can just <literal>#include</literal> <filename
class="headerfile">cyg/io/framebuf.h</filename> and this will
automatically include the device-specific headers. Drivers may export
one header per <structname>cyg_fb</structname> device or a single
header for all devices, without affecting any code outside the device
driver.
    </para>
    <para>
Each exported header serves two purposes. First it defines the
<link linkend="framebuf-parameters">parameters</link>, <link
linkend="framebuf-drawing">drawing primitive</link> macros, and
<link linkend="framebuf-iterating">iteration</link> macros for each
device. Second it declares the <structname>cyg_fb</structname>
structure.
    </para>
    <refsect2 id="framebuf-porting-header-parameters">
      <title>Parameters</title>
      <para>
The parameter section should resemble the following:
      </para>
      <programlisting width=72>
#define CYG_FB_320x240x16_STRUCT            cyg_ipaq_fb_320x240x16
#define CYG_FB_320x240x16_DEPTH             16
#define CYG_FB_320x240x16_FORMAT            CYG_FB_FORMAT_16BPP_TRUE_565
#define CYG_FB_320x240x16_WIDTH             320
#define CYG_FB_320x240x16_HEIGHT            240
#define CYG_FB_320x240x16_VIEWPORT_WIDTH    320
#define CYG_FB_320x240x16_VIEWPORT_HEIGHT   240
#define CYG_FB_320x240x16_FLAGS0            (CYG_FB_FLAGS0_LINEAR_FRAMEBUFFER | \
                                             CYG_FB_FLAGS0_TRUE_COLOUR        | \
                                             CYG_FB_FLAGS0_BLANK              | \
                                             CYG_FB_FLAGS0_BACKLIGHT)
#define CYG_FB_320x240x16_FLAGS1            0
#define CYG_FB_320x240x16_FLAGS2            0
#define CYG_FB_320x240x16_FLAGS3            0
#define CYG_FB_320x240x16_BASE              ((void*)0x01FC0020)
#define CYG_FB_320x240x16_STRIDE            640
      </programlisting>
      <para>
Here <literal>320x240x16</literal> is the framebuffer identifier for
use with the macro API. Application code like:
      </para>
      <programlisting width=72>
#define FRAMEBUF 320x240x16
cyg_ucount16 width = CYG_FB_WIDTH(FRAMEBUF);
      </programlisting>
      <para>
will end up using the <varname>CYG_FB_320x240x16_WIDTH</varname>
definition. To allow for efficient portable code all parameters must
be compile-time constants. If the hardware may allow some of the
parameters to be varied, for example different resolutions, then this
should be handled either by defining separate devices for each
resolution or by configuration options.
      </para>
      <para>
The viewport width and height should always be defined. If the device
driver does not support a viewport then these will be the same as the
standard width and height.
      </para>
      <para>
To allow for future expansion there are <literal>FLAGS1</literal>,
<literal>FLAGS2</literal> and <literal>FLAGS3</literal> parameters. No
flags are defined for these at present, but device drivers should
still define the parameters.
      </para>
      </refsect2>

      <refsect2 id="framebuf-porting-header-drawing">
        <title>Drawing Primitives</title>
        <para>
For each device the exported header file should define macros for the
drawing primitives, using the same naming convention as for
parameters. In the case of true colour displays there should also be
macros for the make-colour and break-colour primitives:
        </para>
        <programlisting width=72>
#define CYG_FB_320x240x16_WRITE_PIXEL(_x_, _y_, _colour_) &hellip;
#define CYG_FB_320x240x16_READ_PIXEL(_x_, _y_) &hellip;
#define CYG_FB_320x240x16_WRITE_HLINE(_x_, _y_, _len_, _colour_) &hellip;
#define CYG_FB_320x240x16_WRITE_VLINE(_x_, _y_, _len_, _colour_) &hellip;
#define CYG_FB_320x240x16_FILL_BLOCK(_x_, _y_, _w_, _h_, _colour_) &hellip;
#define CYG_FB_320x240x16_WRITE_BLOCK(_x_, _y_, _w_, _h_, _data_, _off_, _s_) &hellip;
#define CYG_FB_320x240x16_READ_BLOCK(_x_, _y_, _w_, _h_, _data_, _off_, _s_) &hellip;
#define CYG_FB_320x240x16_MOVE_BLOCK(_x_, _y_, _w_, _h_, _new_x_, _new_y_) &hellip;
#define CYG_FB_320x240x16_MAKE_COLOUR(_r_, _g_, _b_) &hellip;
#define CYG_FB_320x240x16_BREAK_COLOUR(_colour_, _r_, _g_, _b_) &hellip;
        </programlisting>
        <para>
For typical linear framebuffers there are default implementations of
all of these primitives in the generic framebuffer package, held in
the exported header <filename
class="headerfile">cyg/io/framebuf.inl</filename>. Hence the
definitions will typically look something like:
        </para>
        <programlisting width=72>
#include &lt;cyg/io/framebuf.inl&gt;
&hellip;
#define CYG_FB_320x240x16_WRITE_PIXEL(_x_, _y_, _colour_)      \
    CYG_MACRO_START                                            \
    cyg_fb_linear_write_pixel_16_inl(CYG_FB_320x240x16_BASE,   \
                                     CYG_FB_320x240x16_STRIDE, \
                                     _x_, _y_, _colour_);      \
    CYG_MACRO_END
#define CYG_FB_320x240x16_READ_PIXEL(_x_, _y_)                   \
    ({ cyg_fb_linear_read_pixel_16_inl(CYG_FB_320x240x16_BASE,   \
                                       CYG_FB_320x240x16_STRIDE, \
                                       _x_, _y_); })
&hellip;
        </programlisting>
        <para>
All of the drawing primitives have variants for the common display
depths and layouts: 1le, 1be, 2le, 2be, 4le, 4be, 8, 16 and 32. The
inlines take the framebuffer memory base address as the first
argument, and the stride in bytes as the second. Similarly there are
default definitions of the true colour primitives for
<literal>8BPP_TRUE_332</literal>, <literal>16BPP_TRUE_565</literal>,
<literal>16BPP_TRUE_555</literal>, and <literal>32BPP_TRUE_0888</literal>:
        </para>
        <programlisting width=72>
#define CYG_FB_320x240x16_MAKE_COLOUR(_r_, _g_, _b_)             \
    ({  CYG_FB_MAKE_COLOUR_16BPP_TRUE_565(_r_, _g_, _b_); })
#define CYG_FB_320x240x16_BREAK_COLOUR(_colour_, _r_, _g_, _b_)  \
    CYG_MACRO_START                                              \
    CYG_FB_BREAK_COLOUR_16BPP_TRUE_565(_colour_, _r_, _g_, _b_); \
    CYG_MACRO_END
        </programlisting>
        <para>
These default definitions assume the most common layout of colours
within a pixel value, so for
example <function>CYG_FB_MAKE_COLOUR_16BPP_TRUE_565</function> assumes
bits 0 to 4 hold the blue intensity, bits 5 to 10 the green, and bits
11 to 15 the red.
        </para>
        <para>
If the hardware does not implement a linear framebuffer then obviously
writing the device driver will be significantly more work. The macros
will have to perform the operations themselves instead of relying on
generic implementations. The required functionality should be obvious,
and the generic implementations can still be consulted as a reference.
For complicated hardware it may be appropriate to map the macros onto
function calls, rather than try to implement everything inline.
        </para>
        <note><para> At the time of writing the support for linear
framebuffers is incomplete. Only 8bpp, 16bpp and 32bpp depths have
full support. There may also be future extensions, for example
<literal>r90</literal>, <literal>r180</literal> and
<literal>r270</literal> variants to support rotation in software, and
<literal>db</literal> variants to support double-buffered displays.
         </para></note>
      </refsect2>

      <refsect2 id="framebuf-porting-header-iterating">
        <title>Iteration Macros</title>
        <para>
In addition to the drawing primitives the exported header file should
define iteration macros:
        </para>
        <programlisting width=72>
#define CYG_FB_320x240x16_PIXELx_VAR(  _fb_, _id_) &hellip;
#define CYG_FB_320x240x16_PIXELx_SET(  _fb_, _id_, _x_, _y_) &hellip;
#define CYG_FB_320x240x16_PIXELx_GET(  _fb_, _id_, _x_, _y_) &hellip;
#define CYG_FB_320x240x16_PIXELx_ADDX( _fb_, _id_, _incr_) &hellip;
#define CYG_FB_320x240x16_PIXELx_ADDY( _fb_, _id_, _incr_) &hellip;
#define CYG_FB_320x240x16_PIXELx_WRITE(_fb_, _id_, _colour_) &hellip;
#define CYG_FB_320x240x16_PIXELx_READ( _fb_, _id_)&hellip;
#define CYG_FB_320x240x16_PIXELx_FLUSHABS( _fb_, _id_, _x0_, _y0_, _w_, _h_) &hellip;
#define CYG_FB_320x240x16_PIXELx_FLUSHREL( _fb_, _id_, _x0_, _y0_, _dx_, _dy_) &hellip;
        </programlisting>
        <para>
The <parameter>_fb_</parameter> argument will be the identifier, in
this case <literal>320x240x16</literal>, and the
<parameter>_id_</parameter> will be a small number, 0 for a
<literal>PIXEL0</literal> iteration, 1 for <literal>PIXEL1</literal>,
and so on. Together these two should allow unique local variable names
to be constructed. Again there are default definitions of the macros
in <filename class="headerfile">cyg/io/framebuf.inl</filename> for
linear framebuffers:
        </para>
        <programlisting width=72>
#define CYG_FB_320x240x16_PIXELx_VAR(  _fb_, _id_) \
    CYG_FB_PIXELx_VAR_16(  _fb_, _id_)
#define CYG_FB_320x240x16_PIXELx_SET(  _fb_, _id_, _x_, _y_)    \
    CYG_MACRO_START                                             \
    CYG_FB_PIXELx_SET_16( _fb_, _id_,                           \
                          CYG_FB_320x240x16_BASE,               \
                          320, _x_, _y_);                       \
    CYG_MACRO_END
        </programlisting>
        <para>
The linear <literal>SET</literal> and <literal>GET</literal> macros
take base and stride information. The <literal>ADDX</literal> and
<literal>ADDY</literal> macros only need the stride. By convention
most of the macros are wrapped in
<literal>CYG_MACRO_START</literal>/<literal>CYG_MACRO_END</literal> or
<literal>({</literal>/<literal>})</literal> pairs, allowing debug code
to be inserted if necessary. However the <literal>_VAR</literal> macro
must not be wrapped in this way: its purpose is to define one or more
local variables; wrapping the macro would declare the variables in a
new scope, inaccessible to the other macros.
        </para>
        <para>
Again for non-linear framebuffers it will be necessary to implement
these macros fully rather than rely on generic implementations, but
the generic versions can be consulted as a reference.
        </para>
      </refsect2>

      <refsect2 id="framebuf-porting-header-fb">
        <title>The <structname>cyg_fb</structname> declaration</title>
        <para>
Finally there should be an export of the
<structname>cyg_fb</structname> structure or structures. Typically
this uses the <literal>_STRUCT</literal> parameter, reducing the
possibility of an accidental mismatch between the macro and function APIs:
        </para>
        <programlisting width=72>
extern cyg_fb   CYG_FB_320x240x16_STRUCT;
        </programlisting>
      </refsect2>

</refsect1>

  <refsect1 id="framebuf-porting-source">
    <title>Driver-Specific Source Code</title>
    <para>
Exporting parameters and macros in a header file is not enough. It is
also necessary to actually define the <structname>cyg_fb</structname>
structure or structures, and to provide hardware-specific versions of
the control operations. For non-linear framebuffers it will also be
necessary to provide the drawing functions. There is a utility macro
<function>CYG_FB_FRAMEBUFFER</function> for instantiating a
<structname>cyg_fb</structname> structure. Drivers may ignore this
macro and do the work themselves, but at an increased risk of
compatibility problems with future versions of the generic code.
    </para>
    <programlisting width=72>
CYG_FB_FRAMEBUFFER(CYG_FB_320x240x16_STRUCT,
                   CYG_FB_320x240x16_DEPTH,
                   CYG_FB_320x240x16_FORMAT,
                   CYG_FB_320x240x16_WIDTH,
                   CYG_FB_320x240x16_HEIGHT,
                   CYG_FB_320x240x16_VIEWPORT_WIDTH,
                   CYG_FB_320x240x16_VIEWPORT_HEIGHT,
                   CYG_FB_320x240x16_BASE,
                   CYG_FB_320x240x16_STRIDE,
                   CYG_FB_320x240x16_FLAGS0,
                   CYG_FB_320x240x16_FLAGS1,
                   CYG_FB_320x240x16_FLAGS2,
                   CYG_FB_320x240x16_FLAGS3,
                   0, 0, 0, 0,   // fb_driver0 -> fb_driver3
                   &amp;cyg_ipaq_fb_on,
                   &amp;cyg_ipaq_fb_off,
                   &amp;cyg_ipaq_fb_ioctl,
                   &amp;cyg_fb_nop_synch,
                   &amp;cyg_fb_nop_read_palette,
                   &amp;cyg_fb_nop_write_palette,
                   &amp;cyg_fb_dev_make_colour_16bpp_true_565,
                   &amp;cyg_fb_dev_break_colour_16bpp_true_565,
                   &amp;cyg_fb_linear_write_pixel_16,
                   &amp;cyg_fb_linear_read_pixel_16,
                   &amp;cyg_fb_linear_write_hline_16,
                   &amp;cyg_fb_linear_write_vline_16,
                   &amp;cyg_fb_linear_fill_block_16,
                   &amp;cyg_fb_linear_write_block_16,
                   &amp;cyg_fb_linear_read_block_16,
                   &amp;cyg_fb_linear_move_block_16,
                   0, 0, 0, 0 // fb_spare0 -> fb_spare3
);
    </programlisting>
    <para>
The first 13 arguments to the macro correspond to the device
parameters. The next four are arbitrary <type>CYG_ADDRWORD</type>
values for use by the device driver. Typically these are used to share
on/off/ioctl functions between multiple
<structname>cyg_fb</structname> structure. They are followed by
function pointers: on/off/ioctl control; double buffer synch; palette
management; true colour support; and the drawing primitives.
<literal>nop</literal> versions of the on, off, ioctl, synch, palette
management and true colour functions are provided by the generic
framebuffer package, and often these arguments to the
<function>CYG_FB_FRAMEBUFFER</function> macro will be discarded
at compile-time because the relevant CDL interface is not implemented.
The final four arguments are currently unused and should be 0. They
are intended for future expansion, with a value of 0 indicating that a
device driver does not implement non-core functionality.
    </para>
    <para>
As with the macros there are default implementations of the true
colour primitives for <literal>8bpp_true_332</literal>,
<literal>16bpp_true_565</literal>, <literal>16bpp_true_555</literal>
and <literal>32bpp_true_0888</literal>, assuming the most common
layout for these colour modes. There are also default
implementations of the drawing primitives for linear framebuffers,
with variants for the common display depths and layouts. Obviously
non-linear framebuffers will need rather more work.
    </para>
    <para>
Typically a true colour or grey scale framebuffer device driver will
have to implement just three hardware-specific functions:
    </para>
    <programlisting width=72>
int
cyg_ipaq_fb_on(cyg_fb* fb)
{
    &hellip;
}

int
cyg_ipaq_fb_off(cyg_fb* fb)
{
    &hellip;
}

int
cyg_ipaq_fb_ioctl(cyg_fb* fb, cyg_ucount16 key, void* data, size_t* len)
{
    int result;

    switch(key) {
        case CYG_FB_IOCTL_BLANK_GET: &hellip;
        &hellip;
        default: result = ENOSYS; break;
    }
    return result;
}
    </programlisting>
    <para>
These control operations are entirely hardware-specific and cannot be
implemented by generic code. Paletted displays will need two more
functions, again hardware-specific:
    </para>
    <programlisting width=72>
void
cyg_pcvga_fb_read_palette(cyg_fb* fb, cyg_ucount32 first, cyg_ucount32 len,
                          void* data)
{
    &hellip;
}

void
cyg_pcvga_fb_write_palette(cyg_fb* fb, cyg_ucount32 first,  cyg_ucount32 len,
                           const void* data, cyg_ucount16 when)
{
    &hellip;
}
    </programlisting>
  </refsect1>

  <refsect1 id="framebuf-porting-expansion">
    <title>Future Expansion</title>
    <para>
As has been mentioned before framebuffer hardware varies widely. The
design of a generic framebuffer API requires complicated trade-offs
between efficiency, ease of use, ease of porting, and still supporting
a very wide range of hardware. To some extent this requires a lowest
common denominator approach, but the design allows for some future
expansion and optional support for more advanced features like
hardware acceleration.
    </para>
    <para>
The most obvious route for expansion is the <function>ioctl</function>
interface. Device drivers can define their own keys, values
<literal>0x8000</literal> and higher, for any operation. Alternatively
a device driver does not have to implement just the interface provided
by the generic framebuffer package: additional functions and macros
can be exported as required.
    </para>
    <para>
Currently there are only a small number of <function>ioctl</function>
operations. Additional ones may get added in future, for example to
support a hardware mouse cursor, but only in cases where the
functionality is likely to be provided by a significant number of
framebuffer devices. Adding new generic functionality adds to the
maintenance overhead of both code and documentation. When a new
generic <function>ioctl</function> operation is added there will
usually also be one or more new flags, so that device drivers can
indicate they support the functionality. At the time of writing only
12 of the 32 <literal>FLAGS0</literal> flags are used, and a further
96 are available in <literal>FLAGS1</literal>,
<literal>FLAGS2</literal> and <literal>FLAGS3</literal>.
    </para>
    <para>
Another route for future expansion is the four spare arguments to the
<function>CYG_FB_FRAMEBUFFER</function> macro. As an example of how
these may get used in future, consider support for 3d hardware
acceleration. One of the spare fields would become another table of
function pointers to the various accelerators, or possibly a
structure. A <literal>FLAGS0</literal> flag would indicate that the
device driver implements such functionality.
    </para>
    <para>
Other forms of expansion such as defining a new standard drawing
primitive would be more difficult, since this would normally involve
changing the <function>CYG_FB_FRAMEBUFFER</function> macro. Such
expansion should not be necessary because the existing primitives
provide all reasonable core functionality. Instead other packages such
as graphics libraries can work on top of the existing primitives.
    </para>
  </refsect1>

</refentry>

<!-- }}} -->

</part>