URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [rtos/] [ecos-3.0/] [packages/] [io/] [pci/] [current/] [doc/] [pci.sgml] - Rev 825
Go to most recent revision | Compare with Previous | Blame | View Log
<!-- {{{ Banner -->
<!-- =============================================================== -->
<!-- -->
<!-- pci.sgml -->
<!-- -->
<!-- eCos PCI support -->
<!-- -->
<!-- =============================================================== -->
<!-- ####ECOSDOCCOPYRIGHTBEGIN#### -->
<!-- =============================================================== -->
<!-- Copyright (C) 1997, 1998, 1999, 2000, 2001, 2002, 2004 Free Software Foundation, Inc. -->
<!-- This material may be distributed only subject to the terms -->
<!-- and conditions set forth in the Open Publication License, v1.0 -->
<!-- or later (the latest version is presently available at -->
<!-- http://www.opencontent.org/openpub/) -->
<!-- Distribution of the work or derivative of the work in any -->
<!-- standard (paper) book form is prohibited unless prior -->
<!-- permission obtained from the copyright holder -->
<!-- =============================================================== -->
<!-- ####ECOSDOCCOPYRIGHTEND#### -->
<!-- =============================================================== -->
<!-- #####DESCRIPTIONBEGIN#### -->
<!-- -->
<!-- ####DESCRIPTIONEND#### -->
<!-- =============================================================== -->
<!-- }}} -->
<PART id="io-pci">
<TITLE>PCI Library</TITLE>
<CHAPTER id="ecos-pci-library">
<TITLE>The eCos PCI Library</TITLE>
<PARA>The PCI library is an optional part of eCos, and is only
applicable to some platforms.</PARA>
<SECT1 id="pci-library">
<TITLE>PCI Library</TITLE>
<PARA>The eCos PCI library provides the following functionality:</PARA>
<orderedlist>
<listitem><para>Scan the PCI bus for specific devices or devices of a certain
class.</para></listitem>
<listitem><para>Read and change generic PCI information.</para></listitem>
<listitem><para>Read and change device-specific PCI information.</para></listitem>
<listitem><para>Allocate PCI memory and IO space to devices.</para></listitem>
<listitem><para>Translate a device's PCI interrupts to equivalent HAL
vectors.</para></listitem>
</orderedlist>
<PARA>Example code fragments are from the pci1 test (see <filename>io/pci/<release>/tests/pci1.c</filename>).</PARA>
<PARA>All of the functions described below are declared in the header
file <filename><cyg/io/pci.h></filename> which all
clients of the PCI library should include.</PARA>
<SECT2>
<TITLE>PCI Overview</TITLE>
<PARA>The PCI bus supports several address spaces: memory, IO, and configuration. All PCI
devices must support mandatory configuration space registers. Some devices may also present
IO mapped and/or memory mapped resources. Before devices on the bus can be used, they must
be configured. Basically, configuration will assign PCI IO and/or memory address ranges to
each device and then enable that device. All PCI devices have a unique address in
configuration space. This address is comprised of a bus number, a device number, and a
function number. Special devices called bridges are used to connect two PCI busses together.
The PCI standard supports up to 255 busses with each bus having up to 32 devices and each
device having up to 8 functions.
</PARA>
<PARA>The environment in which a platform operates will dictate if and how eCos should
configure devices on the PCI bus. If the platform acts as a host on a single PCI bus,
then devices may be configured individually from the relevant device driver. If the
platform is not the primary host, such as a PCI card plugged into a PC, configuration
of PCI devices may be left to the PC BIOS. If PCI-PCI bridges are involved, configuration
of all devices is best done all at once early in the boot process. This is because all
devices on the secondary side of a bridge must be evaluated for their IO and memory space
requirements before the bridge can be configured.
</PARA>
</SECT2>
<SECT2>
<TITLE>Initializing the bus</TITLE>
<PARA>The PCI bus needs to be initialized before it can be used.
This only needs to be done once - some HALs may do it as part of
the platform initialization procedure, other HALs may leave it to
the application or device drivers to do it. The following function
will do the initialization only once, so it's safe to call from
multiple drivers:</PARA>
<PROGRAMLISTING>void cyg_pci_init( void );</PROGRAMLISTING>
</SECT2>
<SECT2>
<TITLE>Scanning for devices</TITLE>
<PARA>After the bus has been initialized, it is possible to scan
it for devices. This is done using the function:</PARA>
<PROGRAMLISTING>cyg_bool cyg_pci_find_next( cyg_pci_device_id cur_devid,
cyg_pci_device_id *next_devid );
</PROGRAMLISTING>
<PARA>It will scan the bus for devices starting at <parameter>cur_devid
</parameter>. If a device is found, its devid is stored in <parameter>
next_devid</parameter> and the function returns <constant>true</constant>.
</PARA>
<PARA>The <filename>pci1</filename> test's outer loop looks like:</PARA>
<PROGRAMLISTING>
cyg_pci_init();
if (cyg_pci_find_next(CYG_PCI_NULL_DEVID, &devid)) {
do {
<use devid>
} while (cyg_pci_find_next(devid, &devid));
}</PROGRAMLISTING>
<PARA>What happens is that the bus gets initialized and a scan is
started. <literal>CYG_PCI_NULL_DEVID</literal> causes <function>
cyg_pci_find_next()</function> to restart its scan. If the bus does not
contain any devices, the first call to <function>cyg_pci_find_next()</function>
will return <constant>false</constant>.</PARA>
<PARA>If the call returns <constant>true</constant>, a loop is entered where
the found devid is used. After devid processing has completed, the next device
on the bus is searched for; <function>cyg_pci_find_next()</function>
continues its scan from the current devid. The loop terminates when
no more devices are found on the bus.</PARA>
<PARA>This is the generic way of scanning the bus, enumerating all
the devices on the bus. But if the application is looking for a
device of a given device class (e.g., a SCSI controller), or a specific
vendor device, these functions simplify the task a bit:</PARA>
<PROGRAMLISTING>
cyg_bool cyg_pci_find_class( cyg_uint32 dev_class,
cyg_pci_device_id *devid );
cyg_bool cyg_pci_find_device( cyg_uint16 vendor, cyg_uint16 device,
cyg_pci_device_id *devid );</PROGRAMLISTING>
<PARA>They work just like <function>cyg_pci_find_next()</function>,
but only return true when the dev_class or vendor/device
qualifiers match those of a device on the bus. The devid serves
as both an input and an output operand: the scan starts at the given
device, and if a device is found devid is updated with the value
for the found device.</PARA>
<PARA>The <filename><cyg/io/pci_cfg.h></filename> header
file (included by <filename>pci.h</filename>) contains definitions for PCI
class, vendor and device codes which can be used as arguments to the find
functions.
The list of vendor and device codes is not complete: add new codes
as necessary. If possible also register the codes at the PCI Code
List (<ulink url="http://www.yourvote.com/pci">http://www.yourvote.com/pci)
</ulink> which is where the eCos definitions are generated from.</PARA>
</SECT2>
<SECT2>
<TITLE>Generic config information</TITLE>
<PARA>When a valid device ID (devid) is found using one of the above
functions, the associated device can be queried and controlled using
the functions:</PARA>
<PROGRAMLISTING>
void cyg_pci_get_device_info ( cyg_pci_device_id devid,
cyg_pci_device *dev_info );
void cyg_pci_set_device_info ( cyg_pci_device_id devid,
cyg_pci_device *dev_info );</PROGRAMLISTING>
<PARA>The <structname>cyg_pci_device structure</structname> (defined in
<filename>pci.h</filename>) primarily holds information as described by the PCI
specification <link linkend=pci-spec>[1]</link>.
The <filename>pci1</filename> test prints out some of this information:</PARA>
<PROGRAMLISTING> // Get device info
cyg_pci_get_device_info(devid, &dev_info);
diag_printf("\n Command 0x%04x, Status 0x%04x\n",
dev_info.command, dev_info.status);</PROGRAMLISTING>
<PARA>The command register can also be written to, controlling (among
other things) whether the device responds to IO and memory access
from the bus. </PARA>
</SECT2>
<SECT2>
<TITLE>Specific config information</TITLE>
<PARA>The above functions only allow access to generic PCI config
registers. A device can have extra config registers not specified
by the PCI specification. These can be accessed with these functions:</PARA>
<PROGRAMLISTING>
void cyg_pci_read_config_uint8( cyg_pci_device_id devid,
cyg_uint8 offset, cyg_uint8 *val);
void cyg_pci_read_config_uint16( cyg_pci_device_id devid,
cyg_uint8 offset, cyg_uint16 *val);
void cyg_pci_read_config_uint32( cyg_pci_device_id devid,
cyg_uint8 offset, cyg_uint32 *val);
void cyg_pci_write_config_uint8( cyg_pci_device_id devid,
cyg_uint8 offset, cyg_uint8 val);
void cyg_pci_write_config_uint16( cyg_pci_device_id devid,
cyg_uint8 offset, cyg_uint16 val);
void cyg_pci_write_config_uint32( cyg_pci_device_id devid,
cyg_uint8 offset, cyg_uint32 val);
</PROGRAMLISTING>
<PARA>The write functions should only be used for device-specific
config registers since using them on generic registers may invalidate
the contents of a previously fetched cyg_pci_device
structure.</PARA>
</SECT2>
<SECT2>
<TITLE>Allocating memory</TITLE>
<PARA>A PCI device ignores all IO and memory access from the PCI
bus until it has been activated. Activation cannot happen until
after device configuration. Configuration means telling the device
where it should map its IO and memory resources. This is done with
one of the following functions::</PARA>
<PROGRAMLISTING>cyg_bool cyg_pci_configure_device( cyg_pci_device *dev_info );
cyg_bool cyg_pci_configure_bus( cyg_uint8 bus, cyg_uint8 *next_bus );
</PROGRAMLISTING>
<PARA>The <function>cyg_pci_configure_device</function> handles all IO
and memory regions that need configuration on non-bridge devices. On
platforms with multiple busses connected by bridges, the <function>
cyg_pci_configure_bus</function> function should be used. It will recursively
configure all devices on the given <parameter>bus</parameter> and all
subordinate busses. <function>cyg_pci_configure_bus</function> will
use <function>cyg_pci_configure_device</function> to configure
individual non-bridge devices.
</PARA>
<PARA> Each region is represented in the PCI device's config space by BARs
(Base Address Registers) and is handled individually according to type
using these functions:</PARA>
<PROGRAMLISTING>cyg_bool cyg_pci_allocate_memory( cyg_pci_device *dev_info,
cyg_uint32 bar,
CYG_PCI_ADDRESS64 *base );
cyg_bool cyg_pci_allocate_io( cyg_pci_device *dev_info,
cyg_uint32 bar,
CYG_PCI_ADDRESS32 *base );</PROGRAMLISTING>
<PARA>The memory bases (in two distinct address spaces) are increased
as memory regions are allocated to devices. Allocation will fail
(the function returns false) if the base exceeds the limits of the
address space (IO is 1MB, memory is 2^32 or 2^64 bytes).</PARA>
<PARA>These functions can also be called directly by the application/driver
if necessary, but this should not be necessary.</PARA>
<PARA>The bases are initialized with default values provided by
the HAL. It is possible for an application to override these using
the following functions: </PARA>
<PROGRAMLISTING>void cyg_pci_set_memory_base( CYG_PCI_ADDRESS64 base );
void cyg_pci_set_io_base( CYG_PCI_ADDRESS32 base );</PROGRAMLISTING>
<PARA>When a device has been configured, the cyg_pci_device
structure will contain the physical address in the CPU's
address space where the device's memory regions can be
accessed. </PARA>
<PARA>This information is provided in <varname>base_map[]</varname> -
there is a 32 bit word for each of the device's BARs. For
32 bit PCI memory regions, each 32 bit word will be an actual pointer
that can be used immediately by the driver: the memory space will normally
be linearly addressable by the CPU.</PARA>
<PARA>However, for 64 bit PCI memory regions, some (or all) of the
region may be outside of the CPUs address space. In this case the
driver will need to know how to access the region in segments. This
functionality may be adopted by the eCos HAL if deemed useful in
the future. The 2GB available on many systems should suffice though.</PARA>
</SECT2>
<SECT2 id="pci-interrupts">
<TITLE>Interrupts</TITLE>
<PARA>A device may generate interrupts. The HAL vector associated
with a given device on the bus is platform specific. This function
allows a driver to find the actual interrupt vector for a given
device:</PARA>
<PROGRAMLISTING>cyg_bool cyg_pci_translate_interrupt( cyg_pci_device *dev_info,
CYG_ADDRWORD *vec );</PROGRAMLISTING>
<PARA>If the function returns false, no interrupts will be generated
by the device. If it returns true, the CYG_ADDRWORD pointed
to by vec is updated with the HAL interrupt vector the device will
be using. This is how the function is used in the <filename>pci1</filename>
test:</PARA>
<PROGRAMLISTING> if (cyg_pci_translate_interrupt(&dev_info, &irq))
diag_printf(" Wired to HAL vector %d\n", irq);
else
diag_printf(" Does not generate interrupts.\n");</PROGRAMLISTING>
<PARA>The application/drive should attach an interrupt
handler to a device's interrupt before activating the device.</PARA>
</SECT2>
<SECT2>
<TITLE>Activating a device</TITLE>
<PARA>When the device has been allocated memory space it can be
activated. This is not done by the library since a driver may have
to initialize more state on the device before it can be safely activated.</PARA>
<PARA>Activating the device is done by enabling flags in its command
word. As an example, see the <filename>pci1</filename> test which can be
configured to enable the devices it finds. This allows these to be accessed from
GDB (if a breakpoint is set on <function>cyg_test_exit</function>):</PARA>
<PROGRAMLISTING>#ifdef ENABLE_PCI_DEVICES
{
cyg_uint16 cmd;
// Don't use cyg_pci_set_device_info since it clears
// some of the fields we want to print out below.
cyg_pci_read_config_uint16(dev_info.devid,
CYG_PCI_CFG_COMMAND, &cmd);
cmd |= CYG_PCI_CFG_COMMAND_IO|CYG_PCI_CFG_COMMAND_MEMORY;
cyg_pci_write_config_uint16(dev_info.devid,
CYG_PCI_CFG_COMMAND, cmd);
}
diag_printf(" **** Device IO and MEM access enabled\n");
#endif</PROGRAMLISTING>
<note><title>Note</title><PARA>The best way to activate a device is actually
through <function>cyg_pci_set_device_info()</function>,
but in this particular case the <structname>cyg_pci_device</structname>
structure contents from before the activation is required for printout
further down in the code.</PARA></note>
</SECT2>
<SECT2>
<TITLE>Links</TITLE>
<PARA>See these links for more information about PCI:</PARA>
<orderedlist>
<listitem><PARA><anchor id="pci-spec"><ulink url="http://www.pcisig.com/">
http://www.pcisig.com/</ulink> - information on the PCI specifications
</para></listitem>
<listitem><para>
<ulink url="http://www.yourvote.com/pci/">http://www.yourvote.com/pci/
</ulink> - list of vendor and device IDs
</para>
</listitem>
<listitem><para><ulink url="http://www.picmg.org/">http://www.picmg.org/
</ulink> - PCI Industrial Computer Manufacturers Group</PARA>
</listitem>
</orderedlist>
</SECT2>
</SECT1>
<SECT1 id="pci-library-reference">
<TITLE>PCI Library reference</TITLE>
<PARA>This document defines the PCI Support Library for eCos.</PARA>
<PARA>The PCI support library provides a set of routines for accessing
the PCI bus configuration space in a portable manner. This is provided
by two APIs. The high level API is used by device drivers, or other
code, to access the PCI configuration space portably. The low level
API is used by the PCI library itself to access the hardware in
a platform-specific manner, and may also be used by device drivers
to access the PCI configuration space directly.</PARA>
<PARA>Underlying the low-level API is HAL support for the basic
configuration space operations. These should not generally be used
by any code other than the PCI library, and are present in the HAL
to allow low level initialization of the PCI bus and devices to
take place if necessary.</PARA>
<SECT2>
<TITLE>PCI Library API</TITLE>
<PARA>The PCI library provides the following routines and types
for accessing the PCI configuration space.</PARA>
<PARA>The API for the PCI library is found in the header file
<filename class=headerfile><cyg/io/pci.h></filename>.</PARA>
</SECT2>
<SECT2>
<TITLE>Definitions</TITLE>
<PARA>The header file contains definitions for the common configuration
structure offsets and specimen values for device, vendor and class
code.</PARA>
</SECT2>
<SECT2>
<TITLE>Types and data structures</TITLE>
<PARA>The following types are defined:</PARA>
<PROGRAMLISTING>typedef CYG_WORD32 cyg_pci_device_id;</PROGRAMLISTING>
<PARA>This is comprised of the bus number, device number and functional
unit numbers packed into a single word. The macro <function>CYG_PCI_DEV_MAKE_ID()
</function>, in conjunction with the <function>CYG_PCI_DEV_MAKE_DEVFN()</function>
macro, may be used to construct a device id from the bus, device and functional
unit numbers. Similarly the macros <function>CYG_PCI_DEV_GET_BUS()</function>,
<function>CYG_PCI_DEV_GET_DEVFN()</function>,
<function>CYG_PCI_DEV_GET_DEV()</function>, and
<function>CYG_PCI_DEV_GET_FN()</function> may be used to extract the
constituent parts of a device id. It should not be necessary to use these
macros under normal circumstances. The following code fragment demonstrates
how these macros may be used:</PARA>
<PROGRAMLISTING>
// Create a packed representation of device 1, function 0
cyg_uint8 devfn = CYG_PCI_DEV_MAKE_DEVFN(1,0);
// Create a packed devid for that device on bus 2
cyg_pci_device_id devid = CYG_PCI_DEV_MAKE_ID(2, devfn);
diag_printf("bus %d, dev %d, func %d\n",
CYG_PCI_DEV_GET_BUS(devid),
CYG_PCI_DEV_GET_DEV(CYG_PCI_DEV_GET_DEVFN(devid)),
CYG_PCI_DEV_GET_FN(CYG_PCI_DEV_GET_DEVFN(devid));
</PROGRAMLISTING>
<PROGRAMLISTING>typedef struct cyg_pci_device;</PROGRAMLISTING>
<PARA>This structure is used to contain data read from a PCI device's
configuration header by <function>cyg_pci_get_device_info()</function>.
It is also used to record the resource allocations made to the device.</PARA>
<PROGRAMLISTING>typedef CYG_WORD64 CYG_PCI_ADDRESS64;
typedef CYG_WORD32 CYG_PCI_ADDRESS32;</PROGRAMLISTING>
<PARA>Pointers in the PCI address space are 32 bit (IO space) or
32/64 bit (memory space). In most platform and device configurations
all of PCI memory will be linearly addressable using only 32 bit
pointers as read from <varname>base_map[]</varname>.</PARA>
<PARA>The 64 bit type is used to allow handling 64 bit devices in
the future, should it be necessary, without changing the library's
API.</PARA>
</SECT2>
<SECT2>
<TITLE>Functions</TITLE>
<PROGRAMLISTING>void cyg_pci_init(void);</PROGRAMLISTING>
<PARA>Initialize the PCI library and establish contact with the
hardware. This function is idempotent and can be called either by
all drivers in the system, or just from an application initialization
function.</PARA>
<PROGRAMLISTING>cyg_bool cyg_pci_find_device( cyg_uint16 vendor,
cyg_uint16 device,
cyg_pci_device_id *devid );</PROGRAMLISTING>
<PARA>Searches the PCI bus configuration space for a device with
the given <parameter>vendor</parameter> and <parameter>device</parameter>
ids. The search starts at the device pointed to by <parameter>devid</parameter>,
or at the first slot if it contains <literal>CYG_PCI_NULL_DEVID</literal>.
<parameter>*devid</parameter> will be updated with the ID of the next device
found. Returns <constant>true</constant> if one is found and <constant>false
</constant> if not.</PARA>
<PROGRAMLISTING>cyg_bool cyg_pci_find_class( cyg_uint32 dev_class,
cyg_pci_device_id *devid );</PROGRAMLISTING>
<PARA>Searches the PCI bus configuration space for a device with
the given <parameter>dev_class</parameter> class code. The search starts at the
device pointed to by <parameter>devid</parameter>, or at the first slot if it
contains <literal>CYG_PCI_NULL_DEVID</literal>.</PARA>
<PARA><parameter>*devid</parameter> will be updated with the ID of the next
device found. Returns <constant>true</constant> if one is found and
<constant>false</constant> if not.</PARA>
<PROGRAMLISTING>cyg_bool cyg_pci_find_next( cyg_pci_device_id cur_devid,
cyg_pci_device_id *next_devid );</PROGRAMLISTING>
<PARA>Searches the PCI configuration space for the next valid device
after <parameter>cur_devid</parameter>. If <parameter>cur_devid</parameter>
is given the value <literal>CYG_PCI_NULL_DEVID</literal>, then the search starts
at the first slot. It is permitted for <parameter>next_devid</parameter> to
point to <parameter>cur_devid</parameter>. Returns <constant>true</constant>
if another device is found and <constant>false</constant> if not.</PARA>
<PROGRAMLISTING>
cyg_bool cyg_pci_find_matching( cyg_pci_match_func *matchp,
void * match_callback_data,
cyg_pci_device_id *devid );
</PROGRAMLISTING>
<PARA>Searches the PCI bus configuration space for a device whose properties
match those required by the caller supplied <parameter>cyg_pci_match_func</parameter>.
The search starts at the device pointed to by <parameter>devid</parameter>, or
at the first slot if it contains <constant>CYG_PCI_NULL_DEVID</constant>. The
<parameter>devid</parameter> will be updated with the ID of the next device found.
This function returns <constant>true</constant> if a matching device is found
and <constant>false</constant> if not.
</PARA>
<PARA>The match_func has a type declared as:</PARA>
<PROGRAMLISTING>
typedef cyg_bool (cyg_pci_match_func)( cyg_uint16 vendor,
cyg_uint16 device,
cyg_uint32 class,
void * user_data);
</PROGRAMLISTING>
<PARA>The <parameter>vendor</parameter>, <parameter>device</parameter>, and
<parameter>class</parameter> are from the device configuration space. The
<parameter>user_data</parameter> is the callback data passed to <function>
cyg_pci_find_matching</function>.
</PARA>
<PROGRAMLISTING>void cyg_pci_get_device_info ( cyg_pci_device_id devid,
cyg_pci_device *dev_info );</PROGRAMLISTING>
<PARA>This function gets the PCI configuration information for the
device indicated in <parameter>devid</parameter>. The common fields of the
<structname>cyg_pci_device</structname> structure, and the appropriate fields
of the relevant header union member are filled in from the device's
configuration space.
If the device has not been enabled, then this function will also fetch
the size and type information from the base address registers and
place it in the <varname>base_size[]</varname> array.</PARA>
<PROGRAMLISTING>void cyg_pci_set_device_info ( cyg_pci_device_id devid,
cyg_pci_device *dev_info );</PROGRAMLISTING>
<PARA>This function sets the PCI configuration information for the
device indicated in <parameter>devid</parameter>. Only the configuration space
registers that are writable are actually written. Once all the fields have
been written, the device info will be read back into <parameter>*dev_info
</parameter>, so that it reflects the true state of the hardware.</PARA>
<PROGRAMLISTING>
void cyg_pci_read_config_uint8( cyg_pci_device_id devid,
cyg_uint8 offset, cyg_uint8 *val );
void cyg_pci_read_config_uint16( cyg_pci_device_id devid,
cyg_uint8 offset, cyg_uint16 *val );
void cyg_pci_read_config_uint32( cyg_pci_device_id devid,
cyg_uint8 offset, cyg_uint32 *val );
</PROGRAMLISTING>
<PARA>These functions read registers of the appropriate size from
the configuration space of the given device. They should mainly
be used to access registers that are device specific. General PCI
registers are best accessed through <function>cyg_pci_get_device_info()
</function>.</PARA>
<PROGRAMLISTING>
void cyg_pci_write_config_uint8( cyg_pci_device_id devid,
cyg_uint8 offset, cyg_uint8 val );
void cyg_pci_write_config_uint16( cyg_pci_device_id devid,
cyg_uint8 offset, cyg_uint16 val );
void cyg_pci_write_config_uint32( cyg_pci_device_id devid,
cyg_uint8 offset, cyg_uint32 val );
</PROGRAMLISTING>
<PARA>These functions write registers of the appropriate size to
the configuration space of the given device. They should mainly
be used to access registers that are device specific. General PCI
registers are best accessed through <function>cyg_pci_get_device_info()
</function>. Writing the general registers this way may render the contents of
a <structname>cyg_pci_device</structname> structure invalid.</PARA>
</SECT2>
<SECT2>
<TITLE>Resource allocation</TITLE>
<PARA>These routines allocate memory and I/O space to PCI devices.</PARA>
<PROGRAMLISTING>cyg_bool cyg_pci_configure_device( cyg_pci_device *dev_info )</PROGRAMLISTING>
<PARA>Allocate memory and IO space to all base address registers
using the current memory and IO base addresses in the library. The
allocated base addresses, translated into directly usable values,
will be put into the matching <varname>base_map[]</varname> entries
in <parameter>*dev_info</parameter>. If <parameter>*dev_info</parameter> does
not contain valid <varname>base_size[]</varname> entries, then the result is
<constant>false</constant>. This function will also call <function>
cyg_pci_translate_interrupt()</function> to put the interrupt vector into the
HAL vector entry.</PARA>
<PROGRAMLISTING>cyg_bool cyg_pci_configure_bus( cyg_uint8 bus, cyg_uint8 *next_bus )
</PROGRAMLISTING>
<PARA>Allocate memory and IO space to all base address registers on all devices
on the given bus and all subordinate busses. If a PCI-PCI bridge is found on
<parameter>bus</parameter>, this function will call itself recursively in order
to configure the bus on the other side of the bridge. Because of the nature of
bridge devices, all devices on the secondary side of a bridge must be allocated
memory and IO space before the memory and IO windows on the bridge device can be
properly configured. The <parameter>next_bus</parameter> argument points to the
bus number to assign to the next subordinate bus found. The number will be
incremented as new busses are discovered. If successful, <constant>true</constant>
is returned. Otherwise, <constant>false</constant> is returned.
</PARA>
<PROGRAMLISTING>
cyg_bool cyg_pci_translate_interrupt( cyg_pci_device *dev_info,
CYG_ADDRWORD *vec );
</PROGRAMLISTING>
<PARA>Translate the device's PCI interrupt (INTA#-INTD#)
to the associated HAL vector. This may also depend on which slot
the device occupies. If the device may generate interrupts, the
translated vector number will be stored in <parameter>vec</parameter> and the
result is <constant>true</constant>. Otherwise the result is <constant>false
</constant>.</PARA>
<PROGRAMLISTING>
cyg_bool cyg_pci_allocate_memory( cyg_pci_device *dev_info,
cyg_uint32 bar,
CYG_PCI_ADDRESS64 *base );
cyg_bool cyg_pci_allocate_io( cyg_pci_device *dev_info,
cyg_uint32 bar,
CYG_PCI_ADDRESS32 *base );
</PROGRAMLISTING>
<PARA>These routines allocate memory or I/O space to the base address
register indicated by <parameter>bar</parameter>. The base address in
<parameter>*base</parameter> will be correctly aligned and the address of the
next free location will be written back into it if the allocation succeeds. If
the base address register is of the wrong type for this allocation, or
<parameter>dev_info</parameter> does not contain valid <varname>base_size[]
</varname> entries, the result is <constant>false</constant>. These functions
allow a device driver to set up its own mappings if it wants. Most devices
should probably use <function>cyg_pci_configure_device()</function>.</PARA>
<PROGRAMLISTING>void cyg_pci_set_memory_base( CYG_PCI_ADDRESS64 base );
void cyg_pci_set_io_base( CYG_PCI_ADDRESS32 base );</PROGRAMLISTING>
<PARA>These routines set the base addresses for memory and I/O mappings
to be used by the memory allocation routines. Normally these base
addresses will be set to default values based on the platform. These
routines allow these to be changed by application code if necessary.</PARA>
</SECT2>
<SECT2>
<TITLE>PCI Library Hardware API</TITLE>
<PARA>This API is used by the PCI library to access the PCI bus
configuration space. Although it should not normally be necessary,
this API may also be used by device driver or application code to
perform PCI bus operations not supported by the PCI library.</PARA>
<PROGRAMLISTING>void cyg_pcihw_init(void);</PROGRAMLISTING>
<PARA>Initialize the PCI hardware so that the configuration space
may be accessed.</PARA>
<PROGRAMLISTING>
void cyg_pcihw_read_config_uint8( cyg_uint8 bus,
cyg_uint8 devfn, cyg_uint8 offset, cyg_uint8 *val);
void cyg_pcihw_read_config_uint16( cyg_uint8 bus,
cyg_uint8 devfn, cyg_uint8 offset, cyg_uint16 *val);
void cyg_pcihw_read_config_uint32( cyg_uint8 bus,
cyg_uint8 devfn, cyg_uint8 offset, cyg_uint32 *val);
</PROGRAMLISTING>
<PARA>These functions read a register of the appropriate size from
the PCI configuration space at an address composed from the <parameter>bus
</parameter>, <parameter>devfn</parameter> and <parameter>offset</parameter>
arguments.</PARA>
<PROGRAMLISTING>
void cyg_pcihw_write_config_uint8( cyg_uint8 bus,
cyg_uint8 devfn, cyg_uint8 offset, cyg_uint8 val);
void cyg_pcihw_write_config_uint16( cyg_uint8 bus,
cyg_uint8 devfn, cyg_uint8 offset, cyg_uint16 val);
void cyg_pcihw_write_config_uint32( cyg_uint8 bus,
cyg_uint8 devfn, cyg_uint8 offset, cyg_uint32 val);
</PROGRAMLISTING>
<PARA>These functions write a register of the appropriate size to
the PCI configuration space at an address composed from the
<parameter>bus</parameter>, <parameter>devfn</parameter> and
<parameter>offset</parameter> arguments.</PARA>
<PROGRAMLISTING>
cyg_bool cyg_pcihw_translate_interrupt( cyg_uint8 bus,
cyg_uint8 devfn,
CYG_ADDRWORD *vec);
</PROGRAMLISTING>
<PARA>This function interrogates the device and determines which
HAL interrupt vector it is connected to.</PARA>
</SECT2>
<SECT2>
<TITLE>HAL PCI support</TITLE>
<PARA>HAL support consists of a set of C macros that provide the
implementation of the low level PCI API.</PARA>
<PROGRAMLISTING>HAL_PCI_INIT()</PROGRAMLISTING>
<PARA>Initialize the PCI bus.</PARA>
<PROGRAMLISTING>HAL_PCI_READ_UINT8( bus, devfn, offset, val )
HAL_PCI_READ_UINT16( bus, devfn, offset, val )
HAL_PCI_READ_UINT32( bus, devfn, offset, val )</PROGRAMLISTING>
<PARA>Read a value from the PCI configuration space of the appropriate
size at an address composed from the <parameter>bus</parameter>, <parameter>
devfn</parameter> and <parameter>offset</parameter>.</PARA>
<PROGRAMLISTING>HAL_PCI_WRITE_UINT8( bus, devfn, offset, val )
HAL_PCI_WRITE_UINT16( bus, devfn, offset, val )
HAL_PCI_WRITE_UINT32( bus, devfn, offset, val )</PROGRAMLISTING>
<PARA>Write a value to the PCI configuration space of the appropriate
size at an address composed from the <parameter>bus</parameter>, <parameter>
devfn</parameter> and <parameter>offset</parameter>.</PARA>
<PROGRAMLISTING>HAL_PCI_TRANSLATE_INTERRUPT( bus, devfn, *vec, valid )</PROGRAMLISTING>
<PARA>Translate the device's interrupt line into a HAL
interrupt vector.</PARA>
<PROGRAMLISTING>HAL_PCI_ALLOC_BASE_MEMORY
HAL_PCI_ALLOC_BASE_IO</PROGRAMLISTING>
<PARA>These macros define the default base addresses used to initialize
the memory and I/O allocation pointers.</PARA>
<PROGRAMLISTING>HAL_PCI_PHYSICAL_MEMORY_BASE
HAL_PCI_PHYSICAL_IO_BASE</PROGRAMLISTING>
<PARA>PCI memory and IO range do not always correspond directly
to physical memory or IO addresses. Frequently the PCI address spaces
are windowed into the processor's address range at some
offset. These macros define offsets to be added to the PCI base
addresses to translate PCI bus addresses into physical memory addresses
that can be used to access the allocated memory or IO space.</PARA>
<NOTE>
<PARA>The chunk of PCI memory space directly addressable though
the window by the CPU may be smaller than the amount of PCI memory
actually provided. In that case drivers will have to access PCI
memory space in segments. Doing this will be platform specific and
is currently beyond the scope of the HAL.</PARA>
</NOTE>
<PROGRAMLISTING>HAL_PCI_IGNORE_DEVICE( bus, dev, fn )</PROGRAMLISTING
<PARA>This macro, if defined, may be used to limit the devices which are
found by the bus scanning functions. This is sometimes necessary for
devices which need special handling. If this macro evaluates to <constant>true
</constant>, the given device will not be found by <function>cyg_pci_find_next
</function> or other bus scanning functions.
</PARA>
<PROGRAMLISTING>HAL_PCI_IGNORE_BAR( dev_info, bar_num )</PROGRAMLISTING
<PARA>This macro, if defined, may be used to limit which BARs are discovered
and configured. This is sometimes necessary for platforms with limited PCI
windows. If this macro evaluates to <constant>true</constant>, the given BAR
will not be discovered by <function>cyg_pci_get_device_info</function> and
therefore not configured by <function>cyg_pci_configure_device</function>.
</PARA>
</SECT2>
</SECT1>
</CHAPTER>
</PART>
Go to most recent revision | Compare with Previous | Blame | View Log