URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [rtos/] [ecos-3.0/] [packages/] [io/] [usb/] [eth/] [slave/] [current/] [cdl/] [usbs_eth.cdl] - Rev 786
Compare with Previous | Blame | View Log
# ====================================================================
#
# usbs_eth.cdl
#
# USB slave-side ethernet package.
#
# ====================================================================
## ####ECOSGPLCOPYRIGHTBEGIN####
## -------------------------------------------
## This file is part of eCos, the Embedded Configurable Operating System.
## Copyright (C) 1998, 1999, 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
##
## eCos is free software; you can redistribute it and/or modify it under
## the terms of the GNU General Public License as published by the Free
## Software Foundation; either version 2 or (at your option) any later
## version.
##
## eCos is distributed in the hope that it will be useful, but WITHOUT
## ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
## FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
## for more details.
##
## You should have received a copy of the GNU General Public License
## along with eCos; if not, write to the Free Software Foundation, Inc.,
## 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
##
## As a special exception, if other files instantiate templates or use
## macros or inline functions from this file, or you compile this file
## and link it with other works to produce a work based on this file,
## this file does not by itself cause the resulting work to be covered by
## the GNU General Public License. However the source code for this file
## must still be made available in accordance with section (3) of the GNU
## General Public License v2.
##
## This exception does not invalidate any other reasons why a work based
## on this file might be covered by the GNU General Public License.
## -------------------------------------------
## ####ECOSGPLCOPYRIGHTEND####
# ====================================================================
######DESCRIPTIONBEGIN####
#
# Author(s): bartv
# Original data: bartv
# Contributors:
# Date: 2000-10-04
#
#####DESCRIPTIONEND####
# ====================================================================
cdl_package CYGPKG_IO_USB_SLAVE_ETH {
display "USB slave ethernet support"
include_dir "cyg/io/usb"
parent CYGPKG_IO_USB_SLAVE
requires { CYGHWR_IO_USB_SLAVE_OUT_ENDPOINTS >= 1 }
requires { CYGHWR_IO_USB_SLAVE_IN_ENDPOINTS >= 1 }
compile usbseth.c
implements CYGINT_IO_USB_SLAVE_CLIENTS
doc ref/io-usb-slave-eth.html
description "
The USB slave ethernet package supports the development
of USB peripherals which provide an ethernet service to
the host machine. Such a peripheral could be a simple
USB-ethernet converter, or it could be rather more
complicated internally."
cdl_component CYGPKG_USBS_ETHDRV {
display "Provide a driver for a TCP/IP stack."
requires CYGPKG_IO_ETH_DRIVERS
implements CYGHWR_NET_DRIVERS
default_value CYGPKG_NET
compile -library=libextras.a usbsethdrv.c
description "
The primary purpose of USB slave ethernet support is to provide
an ethernet service to the USB host. This is very different
from a conventional network driver which provides a service
to a TCP/IP stack running inside the peripheral. If this
component is enabled then the USB-ethernet code will implement
an eCos network driver, thus supporting both a host-side TCP/IP
stack and an eCos stack. This raises issues such as enabling
the bridge code in the stack, and the package documentation
should be consulted for further information."
cdl_option CYGFUN_USBS_ETHDRV_STATISTICS {
display "Maintain traffic statistics"
flavor bool
default_value CYGPKG_SNMPAGENT
description "
The USB network device driver can maintain some statistics
about traffic, for example the number of incoming and
outgoing packets. These statistics are intended mainly
for SNMP agent software."
}
cdl_option CYGDAT_USBS_ETHDRV_NAME {
display "Name to use for this network device"
flavor data
default_value { (1 == CYGHWR_NET_DRIVERS) ? "\"eth0\"" : "\"eth1\"" }
description "
The name of this network device for control purposes.
"
}
cdl_option CYGPRI_USBS_ETHDRV_ETH0 {
display "Enable/disable generic eth0 configury"
flavor bool
calculated { "\"eth0\"" == CYGDAT_USBS_ETHDRV_NAME }
implements CYGHWR_NET_DRIVER_ETH0
requires !CYGHWR_NET_DRIVER_ETH0_BOOTP
}
cdl_option CYGPRI_USBS_ETHDRV_ETH1 {
display "Enable/disable generic eth1 configury"
flavor bool
calculated { "\"eth1\"" == CYGDAT_USBS_ETHDRV_NAME }
implements CYGHWR_NET_DRIVER_ETH1
requires !CYGHWR_NET_DRIVER_ETH1_BOOTP
}
}
cdl_component CYGPKG_IO_USB_SLAVE_ETH_OPTIONS {
display "Build options"
flavor none
description "
Package-specific build options including control over compiler
flags used only in building this package."
cdl_option CYGPKG_IO_USB_SLAVE_ETH_CFLAGS_ADD {
display "Additional compiler flags"
flavor data
no_define
default_value { "-D_KERNEL -D__ECOS" }
description "
This option modifies the set of compiler flags for
building this package. These flags are used in addition
to the set of global flags."
}
cdl_option CYGPKG_IO_USB_SLAVE_ETH_CFLAGS_REMOVE {
display "Suppressed compiler flags"
flavor data
no_define
default_value { "" }
description "
This option modifies the set of compiler flags for
building this package. These flags are removed from
the set of global flags if present."
}
}
}