OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [rtos/] [ecos-3.0/] [packages/] [io/] [usb/] [eth/] [slave/] [current/] [cdl/] [usbs_eth.cdl] - Rev 838

Go to most recent revision | Compare with Previous | Blame | View Log

# ====================================================================
#
#      usbs_eth.cdl
#
#      USB slave-side ethernet package.
#
# ====================================================================
## ####ECOSGPLCOPYRIGHTBEGIN####                                            
## -------------------------------------------                              
## This file is part of eCos, the Embedded Configurable Operating System.   
## Copyright (C) 1998, 1999, 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
##
## eCos is free software; you can redistribute it and/or modify it under    
## the terms of the GNU General Public License as published by the Free     
## Software Foundation; either version 2 or (at your option) any later      
## version.                                                                 
##
## eCos is distributed in the hope that it will be useful, but WITHOUT      
## ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or    
## FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License    
## for more details.                                                        
##
## You should have received a copy of the GNU General Public License        
## along with eCos; if not, write to the Free Software Foundation, Inc.,    
## 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.            
##
## As a special exception, if other files instantiate templates or use      
## macros or inline functions from this file, or you compile this file      
## and link it with other works to produce a work based on this file,       
## this file does not by itself cause the resulting work to be covered by   
## the GNU General Public License. However the source code for this file    
## must still be made available in accordance with section (3) of the GNU   
## General Public License v2.                                               
##
## This exception does not invalidate any other reasons why a work based    
## on this file might be covered by the GNU General Public License.         
## -------------------------------------------                              
## ####ECOSGPLCOPYRIGHTEND####                                              
# ====================================================================
######DESCRIPTIONBEGIN####
#
# Author(s):      bartv
# Original data:  bartv
# Contributors:
# Date:           2000-10-04
#
#####DESCRIPTIONEND####
# ====================================================================

cdl_package CYGPKG_IO_USB_SLAVE_ETH {
    display     "USB slave ethernet support"
    include_dir "cyg/io/usb"
    parent      CYGPKG_IO_USB_SLAVE
    requires    { CYGHWR_IO_USB_SLAVE_OUT_ENDPOINTS >= 1 }
    requires    { CYGHWR_IO_USB_SLAVE_IN_ENDPOINTS >= 1 }
    compile     usbseth.c
    implements  CYGINT_IO_USB_SLAVE_CLIENTS
    doc         ref/io-usb-slave-eth.html
    
    description "
        The USB slave ethernet package supports the development
        of USB peripherals which provide an ethernet service to
        the host machine. Such a peripheral could be a simple
        USB-ethernet converter, or it could be rather more
        complicated internally."

    cdl_component CYGPKG_USBS_ETHDRV {
        display         "Provide a driver for a TCP/IP stack."
        requires        CYGPKG_IO_ETH_DRIVERS
        implements      CYGHWR_NET_DRIVERS
        default_value   CYGPKG_NET
        compile         -library=libextras.a usbsethdrv.c

        description "
            The primary purpose of USB slave ethernet support is to provide
            an ethernet service to the USB host. This is very different
            from a conventional network driver which provides a service
            to a TCP/IP stack running inside the peripheral. If this
            component is enabled then the USB-ethernet code will implement
            an eCos network driver, thus supporting both a host-side TCP/IP
            stack and an eCos stack. This raises issues such as enabling
            the bridge code in the stack, and the package documentation
            should be consulted for further information."

        cdl_option CYGFUN_USBS_ETHDRV_STATISTICS {
            display       "Maintain traffic statistics"
            flavor        bool
            default_value CYGPKG_SNMPAGENT
            description "
                The USB network device driver can maintain some statistics
                about traffic, for example the number of incoming and
                outgoing packets. These statistics are intended mainly
                for SNMP agent software."
        }

        cdl_option CYGDAT_USBS_ETHDRV_NAME {
            display       "Name to use for this network device"
            flavor        data
            default_value { (1 == CYGHWR_NET_DRIVERS) ? "\"eth0\"" : "\"eth1\"" }
            description "
                The name of this network device for control purposes.
            "
        }

        cdl_option CYGPRI_USBS_ETHDRV_ETH0 {
            display       "Enable/disable generic eth0 configury"
            flavor        bool
            calculated    { "\"eth0\"" == CYGDAT_USBS_ETHDRV_NAME }
            implements    CYGHWR_NET_DRIVER_ETH0
            requires      !CYGHWR_NET_DRIVER_ETH0_BOOTP
        }
        
        cdl_option CYGPRI_USBS_ETHDRV_ETH1 {
            display       "Enable/disable generic eth1 configury"
            flavor        bool
            calculated    { "\"eth1\"" == CYGDAT_USBS_ETHDRV_NAME }
            implements    CYGHWR_NET_DRIVER_ETH1
            requires      !CYGHWR_NET_DRIVER_ETH1_BOOTP
        }
    }
    
    cdl_component CYGPKG_IO_USB_SLAVE_ETH_OPTIONS {
        display     "Build options"
        flavor      none

        description "
            Package-specific build options including control over compiler
            flags used only in building this package."

        cdl_option CYGPKG_IO_USB_SLAVE_ETH_CFLAGS_ADD {
            display "Additional compiler flags"
            flavor  data
            no_define
            default_value { "-D_KERNEL -D__ECOS" }
            description   "
                This option modifies the set of compiler flags for
                building this package. These flags are used in addition
                to the set of global flags."
        }
        cdl_option CYGPKG_IO_USB_SLAVE_ETH_CFLAGS_REMOVE {
            display "Suppressed compiler flags"
            flavor  data
            no_define
            default_value { "" }
            description   "
                This option modifies the set of compiler flags for
                building this package. These flags are removed from
                the set of global flags if present."
        }
    }
}

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.