URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [rtos/] [ecos-3.0/] [packages/] [io/] [usb/] [slave/] [current/] [cdl/] [usbs.cdl] - Rev 825
Go to most recent revision | Compare with Previous | Blame | View Log
# ====================================================================
#
# usbs.cdl
#
# USB slave-side support
#
# ====================================================================
## ####ECOSGPLCOPYRIGHTBEGIN####
## -------------------------------------------
## This file is part of eCos, the Embedded Configurable Operating System.
## Copyright (C) 1998, 1999, 2000, 2001, 2002, 2010 Free Software Foundation, Inc.
##
## eCos is free software; you can redistribute it and/or modify it under
## the terms of the GNU General Public License as published by the Free
## Software Foundation; either version 2 or (at your option) any later
## version.
##
## eCos is distributed in the hope that it will be useful, but WITHOUT
## ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
## FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
## for more details.
##
## You should have received a copy of the GNU General Public License
## along with eCos; if not, write to the Free Software Foundation, Inc.,
## 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
##
## As a special exception, if other files instantiate templates or use
## macros or inline functions from this file, or you compile this file
## and link it with other works to produce a work based on this file,
## this file does not by itself cause the resulting work to be covered by
## the GNU General Public License. However the source code for this file
## must still be made available in accordance with section (3) of the GNU
## General Public License v2.
##
## This exception does not invalidate any other reasons why a work based
## on this file might be covered by the GNU General Public License.
## -------------------------------------------
## ####ECOSGPLCOPYRIGHTEND####
# ====================================================================
######DESCRIPTIONBEGIN####
#
# Author(s): bartv
# Original data: bartv
# Contributors:
# Date: 2000-10-04
#
#####DESCRIPTIONEND####
#
# ====================================================================
cdl_package CYGPKG_IO_USB_SLAVE {
display "USB slave-side support"
parent CYGPKG_IO_USB
include_dir "cyg/io/usb"
active_if CYGHWR_IO_USB_SLAVE
doc ref/io-usb-slave.html
compile usbs.c
cdl_interface CYGINT_IO_USB_SLAVE_CLIENTS {
display "Number of clients of USB devices"
description "
This counter keeps track of the number of clients of
USB devices, especially application-class packages such
as the USB-ethernet support. It can be used by USB
device drivers for default settings.
"
}
cdl_option CYGGLO_IO_USB_SLAVE_APPLICATION {
display "Application code uses USB devices"
default_value 0
implements CYGINT_IO_USB_SLAVE_CLIENTS
description "
If the USB devices are accessed by application code
rather than by other packages then enabling this
option will cause the USB device drivers to be enabled.
"
}
cdl_option CYGGLO_IO_USB_SLAVE_PROVIDE_DEVTAB_ENTRIES {
display "Provide devtab entries by default"
default_value CYGPKG_IO
requires CYGPKG_IO
description "
The USB slave-side endpoints can typically be accessed in two
different ways. There is support for the traditional way of
doing I/O with open/read/write calls, which involves the
use of devtab entries. It is also possible to use a
USB-specific API, defined largely in terms of asynchronous
operations and callbacks (the read/write implementation uses
these lower-level calls). If neither the application nor
any other USB-related packages require the higher-level
read/write calls then it is possible to save some memory
by eliminating the devtab entries.
"
}
cdl_interface CYGHWR_IO_USB_SLAVE_OUT_ENDPOINTS {
display "Number of available host->slave endpoints"
}
cdl_interface CYGHWR_IO_USB_SLAVE_IN_ENDPOINTS {
display "Number of available slave->host endpoints"
}
cdl_option CYGBLD_IO_USB_SLAVE_USBTEST {
display "Build the main USB test program"
doc ref/usbs-testing.html
description "
The USB slave-side software is supplied with host-side
and target-side software that allows a variety of testing
to be performed. The slave-side software is not built
by default since it can only operate in specific environments
and in conjunction with the host-side software. Enabling
this option causes the slave-side software to be added
to the list of test cases for the current configuration."
default_value 0
implements CYGINT_IO_USB_SLAVE_CLIENTS
requires { is_substr(CYGPKG_IO_USB_SLAVE_TESTS, " tests/usbtarget") }
requires CYGFUN_KERNEL_API_C CYGFUN_KERNEL_THREADS_TIMER !CYGINT_KNEREL_SCHEDULER_UNIQUE_PRIORITIES
requires CYGPKG_LIBC_STDIO CYGSEM_LIBC_STDIO_THREAD_SAFE_STREAMS
}
cdl_option CYGPKG_IO_USB_SLAVE_TESTS {
display "USB slave tests"
flavor data
no_define
default_value { "" }
description "This option specifies the set of tests to be
built for the USB slave package"
}
}
Go to most recent revision | Compare with Previous | Blame | View Log