Subversion Repositories openrisc

//==========================================================================
//
//      devs/wallclock/wallclock.cxx
//
//      Wallclock base
//
//==========================================================================
// ####ECOSGPLCOPYRIGHTBEGIN####                                            
// -------------------------------------------                              
// This file is part of eCos, the Embedded Configurable Operating System.   
// Copyright (C) 1998, 1999, 2000, 2001, 2002, 2009 Free Software Foundation, Inc.
//
// eCos is free software; you can redistribute it and/or modify it under    
// the terms of the GNU General Public License as published by the Free     
// Software Foundation; either version 2 or (at your option) any later      
// version.                                                                 
//
// eCos is distributed in the hope that it will be useful, but WITHOUT      
// ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or    
// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License    
// for more details.                                                        
//
// You should have received a copy of the GNU General Public License        
// along with eCos; if not, write to the Free Software Foundation, Inc.,    
// 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.            
//
// As a special exception, if other files instantiate templates or use      
// macros or inline functions from this file, or you compile this file      
// and link it with other works to produce a work based on this file,       
// this file does not by itself cause the resulting work to be covered by   
// the GNU General Public License. However the source code for this file    
// must still be made available in accordance with section (3) of the GNU   
// General Public License v2.                                               
//
// This exception does not invalidate any other reasons why a work based    
// on this file might be covered by the GNU General Public License.         
// -------------------------------------------                              
// ####ECOSGPLCOPYRIGHTEND####                                              
//==========================================================================
//#####DESCRIPTIONBEGIN####
//
// Author(s):     jskov
// Contributors:  jskov
// Date:          2000-03-28
// Purpose:       Wallclock base driver
// Description:   This provides a generic wallclock base driver which
//                relies on sub-drivers to provide the interface functions
//                to the hardware device (see wallclock.hxx for details).
//
//                The driver can be configured to run in one of two modes:
//                  init-get mode:
//                    In this mode, the hardware driver only needs to
//                    implement a function to read the hardware clock
//                    and a (possibly empty) init function which makes
//                    sure the hardware clock is properly initialized.
//                    While the driver in this mode has a smaller memory
//                    foot-print, it does not support battery-backed up
//                    clocks.
//
//                  set-get mode:
//                    Requires both set and get functions for the hardware
//                    device. While bigger, it allows support of 
//                    battery-backed up clocks.
//
//
//####DESCRIPTIONEND####
//
//==========================================================================
 
#include <pkgconf/wallclock.h>          // Wallclock device config
 
#include <cyg/infra/cyg_type.h>         // Common type definitions and support
 
#include <cyg/hal/drv_api.h>	        // Driver API
 
#include <cyg/io/wallclock.hxx>         // The WallClock API
 
 
//-----------------------------------------------------------------------------
// Local static variables
 
static Cyg_WallClock wallclock_instance CYGBLD_ATTRIB_INIT_PRI( CYG_INIT_DEV_WALLCLOCK );
 
#ifndef CYGSEM_WALLCLOCK_SET_GET_MODE
static cyg_uint32 epoch_ticks;
static cyg_uint32 epoch_time_stamp;
#endif
 
static cyg_drv_mutex_t wallclock_lock;
 
Cyg_WallClock *Cyg_WallClock::wallclock;
 
//-----------------------------------------------------------------------------
// Constructor
 
Cyg_WallClock::Cyg_WallClock()
{
    // install instance pointer
    wallclock = &wallclock_instance;
 
    // Initialize lock used for mutually exclusive access to hardware
    cyg_drv_mutex_init(&wallclock_lock);
 
    // Always allow low-level driver to initialize clock, even though it
    // may not be necessary for set-get mode.
    init_hw_seconds();
}
 
//-----------------------------------------------------------------------------
// Returns the number of seconds elapsed since 1970-01-01 00:00:00.
// This may involve reading the hardware, so it may take anything up to
// a second to complete.
 
cyg_uint32 Cyg_WallClock::get_current_time()
{
    cyg_uint32 res;
 
    while (!cyg_drv_mutex_lock(&wallclock_lock));
 
#ifdef CYGSEM_WALLCLOCK_SET_GET_MODE
    res = get_hw_seconds();
#else
    res = epoch_time_stamp + get_hw_seconds() - epoch_ticks;
#endif
 
    cyg_drv_mutex_unlock(&wallclock_lock);
 
    return res;
}
 
//-----------------------------------------------------------------------------
// Sets the clock. Argument is seconds elapsed since 1970-01-01 00:00:00.
// This may involve reading or writing to the hardware, so it may take
// anything up to a second to complete.
void Cyg_WallClock::set_current_time( cyg_uint32 time_stamp )
{
    while (!cyg_drv_mutex_lock(&wallclock_lock));
 
#ifdef CYGSEM_WALLCLOCK_SET_GET_MODE
    set_hw_seconds(time_stamp);
#else
    epoch_time_stamp    = time_stamp;
    epoch_ticks         = get_hw_seconds();
#endif
 
    cyg_drv_mutex_unlock(&wallclock_lock);
}
 
//-----------------------------------------------------------------------------
// End of devs/wallclock/wallclock.cxx