URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [rtos/] [ecos-3.0/] [packages/] [kernel/] [current/] [cdl/] [counters.cdl] - Rev 810
Go to most recent revision | Compare with Previous | Blame | View Log
# ====================================================================
#
# counters.cdl
#
# configuration data related to the kernel counters and clocks
#
# ====================================================================
## ####ECOSGPLCOPYRIGHTBEGIN####
## -------------------------------------------
## This file is part of eCos, the Embedded Configurable Operating System.
## Copyright (C) 1998, 1999, 2000, 2001, 2002 Free Software Foundation, Inc.
##
## eCos is free software; you can redistribute it and/or modify it under
## the terms of the GNU General Public License as published by the Free
## Software Foundation; either version 2 or (at your option) any later
## version.
##
## eCos is distributed in the hope that it will be useful, but WITHOUT
## ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
## FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
## for more details.
##
## You should have received a copy of the GNU General Public License
## along with eCos; if not, write to the Free Software Foundation, Inc.,
## 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
##
## As a special exception, if other files instantiate templates or use
## macros or inline functions from this file, or you compile this file
## and link it with other works to produce a work based on this file,
## this file does not by itself cause the resulting work to be covered by
## the GNU General Public License. However the source code for this file
## must still be made available in accordance with section (3) of the GNU
## General Public License v2.
##
## This exception does not invalidate any other reasons why a work based
## on this file might be covered by the GNU General Public License.
## -------------------------------------------
## ####ECOSGPLCOPYRIGHTEND####
# ====================================================================
######DESCRIPTIONBEGIN####
#
# Author(s): jskov
# Original data: nickg
# Contributors:
# Date: 1999-07-05
#
#####DESCRIPTIONEND####
#
# ====================================================================
cdl_option CYGVAR_KERNEL_COUNTERS_CLOCK {
display "Provide real-time clock"
requires CYGIMP_KERNEL_INTERRUPTS_DSRS
default_value 1
description "
On all current target systems the kernel can provide a
real-time clock. This clock serves two purposes. First it is
necessary to support clock and alarm related functions.
Second it is needed to implement timeslicing in some of the
schedulers including the mlqueue scheduler. If the
application does not require any of these facilities then it
is possible to disable the real time clock support
completely."
}
cdl_option CYGNUM_KERNEL_COUNTERS_CLOCK_ISR_PRIORITY {
display "Interrupt priority for the real-time clock"
active_if CYGVAR_KERNEL_COUNTERS_CLOCK
flavor data
default_value { is_loaded(CYGNUM_HAL_KERNEL_COUNTERS_CLOCK_ISR_DEFAULT_PRIORITY) ?
CYGNUM_HAL_KERNEL_COUNTERS_CLOCK_ISR_DEFAULT_PRIORITY : 1 }
description "
The implementation of the kernel's real-time clock typically
involves installing an interrupt handler on a suitable hardware
timer. This option controls the priority level used for that
interrupt. On most platforms the value is not important because
the clock ISR leaves most of the work to be done by the DSR.
However some processors have interrupt controllers with special
requirements for the interrupt priorities, in which case
application developers must be able to manipulate the clock's
priority."
}
cdl_interface CYGINT_KERNEL_COUNTERS {
requires 1 == CYGINT_KERNEL_COUNTERS
no_define
}
# NOTE: these option should really be a single enum.
cdl_option CYGIMP_KERNEL_COUNTERS_SINGLE_LIST {
display "Implement counters using a single list"
default_value 1
implements CYGINT_KERNEL_COUNTERS
description "
There are two different implementations of the counter
objects. The first implementation stores all alarms in a
single linked list. The alternative implementation uses a
table of linked lists. A single list is more efficient in
terms of memory usage and is generally adequate when the
application only makes use of a small number of alarms."
}
cdl_component CYGIMP_KERNEL_COUNTERS_MULTI_LIST {
display "Implement counters using a table of lists"
default_value 0
implements CYGINT_KERNEL_COUNTERS
description "
There are two different implementations of the counter
objects. The first implementation stores all alarms in a
single linked list. The alternative implementation uses a
table of linked lists, with the size of the table being a
separate configurable option. For more complicated
operations it is better to have a table of lists since this
reduces the amount of computation whenever the timer goes
off. Assuming a table size of 8 (the default value) on
average the timer code will only need to check 1/8 of the
pending alarms instead of all of them."
cdl_option CYGNUM_KERNEL_COUNTERS_MULTI_LIST_SIZE {
display "Size of counter list table"
flavor data
legal_values 1 to 1024
default_value 8
description "
If counters are implemented using an array of linked lists
then this option controls the size of the array. A larger
size reduces the amount of computation that needs to take
place whenever the timer goes off, but requires extra
memory."
}
}
cdl_option CYGIMP_KERNEL_COUNTERS_SORT_LIST {
display "Sort the counter list"
default_value 0
description "
Sorting the counter lists reduces the amount of work that
has to be done when a counter tick is processed, since the
next alarm to expire is always at the front of the list.
However, it makes adding an alarm to the list more expensive
since a search must be done for the correct place to put it.
Many alarms are used to implement timeouts, which seldom trigger,
so it is worthwhile optimizing this case. For this reason
sorted list are disabled by default."
}
cdl_option CYGVAR_KERNEL_COUNTERS_CLOCK_LATENCY {
display "Measure real-time \[clock\] interrupt latency"
requires CYGVAR_KERNEL_COUNTERS_CLOCK
default_value 0
description "
Measure the interrupt latency as seen by the real-time clock
timer interrupt. This requires hardware support, defined by
the HAL_CLOCK_LATENCY() macro."
}
cdl_option CYGVAR_KERNEL_COUNTERS_CLOCK_DSR_LATENCY {
display "Measure real-time \[clock\] DSR latency"
requires CYGVAR_KERNEL_COUNTERS_CLOCK_LATENCY
default_value CYGVAR_KERNEL_COUNTERS_CLOCK_LATENCY
description "
Measure the DSR latency as seen by the real-time clock
timer interrupt. This requires hardware support, defined by
the HAL_CLOCK_LATENCY() macro."
}
cdl_option CYGNUM_KERNEL_COUNTERS_RTC_RESOLUTION {
display "RTC resolution"
flavor data
calculated {"{CYGNUM_HAL_RTC_NUMERATOR, CYGNUM_HAL_RTC_DENOMINATOR}"}
description "
This option automatically defines the tuple which is used to
initialize the RTC resolution, consisting of a numerator and
denominator. The values of the numerator and denominator are
defined by the HAL."
}
cdl_option CYGNUM_KERNEL_COUNTERS_RTC_PERIOD {
display "RTC period"
flavor data
calculated {"CYGNUM_HAL_RTC_PERIOD"}
description "
This option defines the RTC period to be used in
setting the system clock hardware. It is essentially
an alias for CYGNUM_HAL_RTC_PERIOD, which is defined
in the HAL."
}
# EOF counters.cdl
Go to most recent revision | Compare with Previous | Blame | View Log