Subversion Repositories openrisc

# ====================================================================
#
#      instrument.cdl
#
#      configuration data related to the kernel instrumentation
#
# ====================================================================
## ####ECOSGPLCOPYRIGHTBEGIN####                                            
## -------------------------------------------                              
## This file is part of eCos, the Embedded Configurable Operating System.   
## Copyright (C) 1998, 1999, 2000, 2001, 2002, 2009, 2010 Free Software Foundation, Inc.
##
## eCos is free software; you can redistribute it and/or modify it under    
## the terms of the GNU General Public License as published by the Free     
## Software Foundation; either version 2 or (at your option) any later      
## version.                                                                 
##
## eCos is distributed in the hope that it will be useful, but WITHOUT      
## ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or    
## FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License    
## for more details.                                                        
##
## You should have received a copy of the GNU General Public License        
## along with eCos; if not, write to the Free Software Foundation, Inc.,    
## 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.            
##
## As a special exception, if other files instantiate templates or use      
## macros or inline functions from this file, or you compile this file      
## and link it with other works to produce a work based on this file,       
## this file does not by itself cause the resulting work to be covered by   
## the GNU General Public License. However the source code for this file    
## must still be made available in accordance with section (3) of the GNU   
## General Public License v2.                                               
##
## This exception does not invalidate any other reasons why a work based    
## on this file might be covered by the GNU General Public License.         
## -------------------------------------------                              
## ####ECOSGPLCOPYRIGHTEND####                                              
# ====================================================================
######DESCRIPTIONBEGIN####
#
# Author(s):      jskov
# Original data:  nickg
# Contributors:
# Date:           1999-07-05
#
#####DESCRIPTIONEND####
#
# ====================================================================

cdl_option CYGVAR_KERNEL_INSTRUMENT_EXTERNAL_BUFFER {
    display       "Use buffer provided by the application"
    flavor        bool
    default_value 0
    description "
          In most circumstances the kernel should provide the
          instrumentation circular buffer itself. Occasionally
          application code may wish to provide the buffer instead,
          giving the application code more convenient access to the
          buffer. This also makes it possible to put the circular
          buffer in special areas of memory, for example a region that
          is shared with the host."
}

cdl_option CYGNUM_KERNEL_INSTRUMENT_BUFFER_SIZE {
    display       "Instrumentation buffer size"
    flavor        data
    legal_values  16 to 0x100000
    default_value 256
    description   "
        If kernel instrumentation is enabled then the instrumentation
        data goes into a circular buffer. A larger buffer allows
        more data to be stored, but at a significant cost in memory.
        The value of this option corresponds to the number of entries
        in the table, and typically each entry will require 16 bytes
        of memory."
}

cdl_option CYGDBG_KERNEL_INSTRUMENT_BUFFER_WRAP {
    display       "Wrap instrumentation buffer"
    default_value 1
    description   "
        When the instrumentation buffer is full it can either be restarted
        from the beginning, overwriting older data, or it can stop at the
        end. The former is useful if you want to look at the last entries
        made while the latter is useful if you want to look at the first
        few."
}

cdl_option CYGDBG_KERNEL_INSTRUMENT_FLAGS {
    display       "Perform selective instrumentation"
    default_value 1
    description   "
        The kernel can either collect all instrumentation events, or
        it can filter out events at runtime based on a set of flags.
        For example it would be possible to decide at runtime that
        only scheduler and interrupt instrumentation flags are of
        interest and that all other flags should be ignored. This
        flag mechanism involves extra code and processor cycle
        overhead in the instrumentation code, so it can be disabled
        if the application developer is interested in all
        instrumentation events."
}

cdl_option CYGDBG_KERNEL_INSTRUMENT_SCHED {
    display       "Instrument common scheduler operations"
    default_value 1
    active_if     CYGPKG_KERNEL_SCHED
    description   "
        It is possible to perform selective instrumentation at
        run-time. It is also possible to disable instrumentation
        in various kernel components at compile-time, thus
        reducing the code size overheads. This option controls
        whether or not instrumentation support is compiled into
        the scheduling code."
}

cdl_option CYGDBG_KERNEL_INSTRUMENT_THREAD {
    display       "Instrument thread operations"
    default_value 1
    active_if     CYGPKG_KERNEL_THREADS
    description   "
        It is possible to perform selective instrumentation at
        run-time. It is also possible to disable instrumentation
        in various kernel components at compile-time, thus
        reducing the code size overheads. This option controls
        whether or not instrumentation support is compiled into
        the code that manipulates threads."
}

cdl_option CYGDBG_KERNEL_INSTRUMENT_INTR {
    display       "Instrument interrupt-related operations"
    default_value 1
    active_if     CYGPKG_KERNEL_INTERRUPTS
    description   "
        It is possible to perform selective instrumentation at
        run-time. It is also possible to disable instrumentation
        in various kernel components at compile-time, thus
        reducing the code size overheads. This option controls
        whether or not instrumentation support is compiled into
        the interrupt handling code."
}

cdl_option CYGDBG_KERNEL_INSTRUMENT_MUTEX {
    display       "Instrument mutex operations"
    default_value 1
    active_if     CYGPKG_KERNEL_SYNCH
    description   "
        It is possible to perform selective instrumentation at
        run-time. It is also possible to disable instrumentation
        in various kernel components at compile-time, thus
        reducing the code size overheads. This option controls
        whether or not instrumentation support is compiled into
        the mutex code."
}

cdl_option CYGDBG_KERNEL_INSTRUMENT_CONDVAR {
    display       "Instrument condition variable operations"
    default_value 1
    active_if     CYGPKG_KERNEL_SYNCH
    description   "
        It is possible to perform selective instrumentation at
        run-time. It is also possible to disable instrumentation
        in various kernel components at compile-time, thus
        reducing the code size overheads. This option controls
        whether or not instrumentation support is compiled into
        the condition variable code."
}

cdl_option CYGDBG_KERNEL_INSTRUMENT_BINSEM {
    display       "Instrument binary semaphore operations"
    default_value 1
    active_if     CYGPKG_KERNEL_SYNCH
    description   "
        It is possible to perform selective instrumentation at
        run-time. It is also possible to disable instrumentation
        in various kernel components at compile-time, thus
        reducing the code size overheads. This option controls
        whether or not instrumentation support is compiled into
        the binary semaphore code."
}

cdl_option CYGDBG_KERNEL_INSTRUMENT_CNTSEM {
    display       "Instrument counting semaphore operations"
    default_value 1
    active_if     CYGPKG_KERNEL_SYNCH
    description   "
        It is possible to perform selective instrumentation at
        run-time. It is also possible to disable instrumentation
        in various kernel components at compile-time, thus
        reducing the code size overheads. This option controls
        whether or not instrumentation support is compiled into
        the counting semaphore code."
}

cdl_option CYGDBG_KERNEL_INSTRUMENT_MBOXT {
    display       "Instrument message box operations"
    default_value 1
    active_if     CYGPKG_KERNEL_SYNCH
    description   "
        It is possible to perform selective instrumentation at
        run-time. It is also possible to disable instrumentation
        in various kernel components at compile-time, thus
        reducing the code size overheads. This option controls
        whether or not instrumentation support is compiled into
        the message box code."
}

cdl_option CYGDBG_KERNEL_INSTRUMENT_FLAG {
    display       "Instrument event flag operations"
    default_value 1
    active_if     CYGPKG_KERNEL_SYNCH
    description   "
        It is possible to perform selective instrumentation at
        run-time. It is also possible to disable instrumentation
        in various kernel components at compile-time, thus
        reducing the code size overheads. This option controls
        whether or not instrumentation support is compiled into
        the event flag code."
}

cdl_option CYGDBG_KERNEL_INSTRUMENT_CLOCK {
    display       "Instrument clock operations"
    default_value 1
    active_if     CYGVAR_KERNEL_COUNTERS_CLOCK
    description   "
        It is possible to perform selective instrumentation at
        run-time. It is also possible to disable instrumentation
        in various kernel components at compile-time, thus
        reducing the code size overheads. This option controls
        whether or not instrumentation support is compiled into
        the real-time clock code."
}

cdl_option CYGDBG_KERNEL_INSTRUMENT_ALARM {
    display       "Instrument alarm-related operations"
    default_value 1
    active_if     CYGVAR_KERNEL_COUNTERS_CLOCK
    description   "
        It is possible to perform selective instrumentation at
        run-time. It is also possible to disable instrumentation
        in various kernel components at compile-time, thus
        reducing the code size overheads. This option controls
        whether or not instrumentation support is compiled into
        the code related to alarm operations."
}

cdl_option CYGDBG_KERNEL_INSTRUMENT_SMP {
    display       "Instrument SMP-related operations"
    default_value 1
    active_if     CYGVAR_KERNEL_COUNTERS_CLOCK
    description   "
        It is possible to perform selective instrumentation at
        run-time. It is also possible to disable instrumentation
        in various kernel components at compile-time, thus
        reducing the code size overheads. This option controls
        whether or not instrumentation support is compiled into
        the code related to SMP operations."
}

cdl_option CYGDBG_KERNEL_INSTRUMENT_MLQ {
    display       "Instrument multi-level queue scheduler operations"
    default_value 1
    active_if     CYGSEM_KERNEL_SCHED_MLQUEUE
    description   "
        It is possible to perform selective instrumentation at
        run-time. It is also possible to disable instrumentation
        in various kernel components at compile-time, thus
        reducing the code size overheads. This option controls
        whether or not instrumentation support is compiled into
        the code for the multi-level queue scheduler."
}

cdl_option CYGDBG_KERNEL_INSTRUMENT_BITMAP {
    display       "Instrument bitmap scheduler operations"
    default_value 1
    active_if     CYGSEM_KERNEL_SCHED_BITMAP
    description   "
        It is possible to perform selective instrumentation at
        run-time. It is also possible to disable instrumentation
        in various kernel components at compile-time, thus
        reducing the code size overheads. This option controls
        whether or not instrumentation support is compiled into
        the code for the bitmap scheduler."
}

cdl_option CYGDBG_KERNEL_INSTRUMENT_USER {
    display       "Support application-level instrumentation"
    default_value 1
    description   "
        It is possible to perform selective instrumentation at
        run-time. It is also possible to disable instrumentation
        in various kernel components at compile-time, thus
        reducing the code size overheads. This option controls
        whether or not application-level instrumentation gets
        compiled in."
}

cdl_component CYGDBG_KERNEL_INSTRUMENT_MSGS {
    display       "Provide user-friendly instrumentation messages"
    default_value 1
    description   "
        Include code which will convert the instrument type field 
        into a more human understandable string"
        
    cdl_option  CYGDBG_KERNEL_INSTRUMENT_MSGS_BUILD_HEADERFILE {
        display   "Rebuild the header file"
        default_value 0
        description "

        Make (using a shell script) include/cyg/kernel/instrument_desc.h in
        your build tree; this is normally simply copied from the repository.
        If you make a permanent change to include/instrmnt.h, such that
        instrument_desc.h needs updating, it's up to you to first delete the
        master file
        ECOS_REPOSITORY/kernel/VERSION/include/instrument_desc.h
        in your source repository, make the new version by enabling this
        option then copy the new file
        back from your build place to its source in
        ECOS_REPOSITORY/kernel/VERSION/include/instrument_desc.h
        and/or commit this to any version control system that you use."

        make -priority 50 {
            <PREFIX>/include/cyg/kernel/instrument_desc.h: <PACKAGE>/include/instrmnt.h <PACKAGE>/cdl/instrument.cdl
            sh $(REPOSITORY)/$(PACKAGE)/host/instr/instrument.sh $< > $@
        }
    }

    cdl_component CYGDBG_KERNEL_INSTRUMENT_BUILD_HOST_DUMP {
        display       "Build the host tool to print out a dump"
        default_value 0
        description   "
        Generate a host program which can dump the instrumentation
        data in a human readable format. You have to somehow get the
        instrumentation buffer into a file on the host. 'Exercise for
        the reader' as university lecturers tend to say."

        make -priority 51 {
            <PREFIX>/bin/dump_instr: <PREFIX>/include/cyg/kernel/instrument_desc.h <PACKAGE>/cdl/instrument.cdl
            @mkdir -p $(dir $@)
            @mkdir -p tempinc
            @cp -r $(PREFIX)/include/cyg tempinc
            @cp -r $(PREFIX)/include/pkgconf tempinc
            cc -I./tempinc $(REPOSITORY)/$(PACKAGE)/host/instr/dump_instr.c -o $(PREFIX)/bin/dump_instr
            @rm -rf tempinc
        }
    }
}

# EOF instrument.cdl