Subversion Repositories openrisc

2009-11-13  John Dallaway  <john@dallaway.org.uk>

        * cdl/net_autotest.cdl: Specify test executable names for
        compatibility with the eCos Configuration Tool.

2002-02-01  Gary Thomas  <gthomas@redhat.com>

        * tests/slowpingmux.c (ping_test): 
        * tests/routeping.inl: (ping_test): 
        * tests/floodpingmux.c: (net_test): 
        * tests/autohost.inl (autohost_tell): 
        * host/awaitorder.c (main): Need valid value for sin_len.

2001-10-10  Hugo Tyson  <hmt@redhat.com>

        * tests/floodping.c:
        * tests/floodpingmux.c:
        * tests/snmpmulti.c:
        * tests/snmppings.c:
        * tests/snmpwalk.c:
        More conditional compilation needed for use of eth0_up, eth1_up
        and the like, since the config opt is now a boolean and so these
        might not exist.

2001-06-26  Hugo Tyson  <hmt@redhat.com>

        * tests/routeping.inl (route_add_s): Add a close to the socket.
        Don't be upset if you can't ping www.cygnus.com by number!

2000-12-08  Hugo Tyson  <hmt@redhat.com>

        * host/tftpget.sh (TARGET): Try a little harder to put a correct
        test dataset into the target; we are testing GET not PUT here.  We
        are seeing get fails of 1Mb data on the zeroth try; it could be a
        real get bug, or problems putting the original image.  This change
        should help diagnose which.

        * tests/slowpingmux.c (ping_host): Make this much less verbose in
        [good] output; the farm rejects too much chatter.

2000-11-17  Hugo Tyson  <hmt@redhat.com>

        * tests/memcheck.inl (memcheck_final): Ignore clusters if
        simulating network failures; I guess memory is used up with
        partial packets awaiting reassembly, and they'll time out.

        * tests/routeping.inl (net_test): Call TNR_ON/OFF() correctly.

        * tests/slowpingmux.c (net_test): Call TNR_ON/OFF() correctly.

        * tests/floodpingmux.c (net_test): Only call TNR_INIT() once.
        Call TNR_OFF(); again after dumpstats() turned it on again.
        Call TNR_ON/OFF() correctly.

        * tests/autohost.inl (autohost_getresults): Add a missing
        semicolon.  Doh!  Only a problem with realtime test harness
        enabled.

2000-11-15  Hugo Tyson  <hmt@redhat.com>

        * doc/host.txt: Updated.

2000-11-15  Hugo Tyson  <hmt@redhat.com>

        * cdl/net_autotest.cdl: Build the new tests.

        * tests/routeping.inl: New file: the meat of a testcase to check
        that external networks are only accessible if we have added a
        suitable route.  This requires a further network called 10.0.3.x
        attached to the machine that serves DHCP to eth0, and one called
        10.0.4.x on the server for eth1.  These can both be aliases for
        loopback on the linux host if needs be.

        * tests/route_none.c:
        * tests/route_3.c: 
        * tests/route_4.c: 
        * tests/route_3_4.c: 
        New files: Various invocations of the above.  These just make a
        few #defines then #include "routeping.inl"
        
2000-11-10  Hugo Tyson  <hmt@redhat.com>

        * tests/autohost.inl (autohost_init): Call the memory checking
        init and finalization functions in the appropriate places.

        * tests/memcheck.inl (RATIO): New file; check for mbuf &c leaks
        (if the API is defined in network.h, so it it'll work with the 144
        tarball).  We allow either as much again or 15% of memory to be
        used at the end of the test, for each of the 3 memory regions the
        stack uses.

        * tests/floodpingmux.c (net_test): Don't print out mbuf &c usage,
        leave it up to the memory checking subsystem.

2000-11-10  Hugo Tyson  <hmt@redhat.com>

        * host/obey.sh: Handle the new case of doing snmpwalk and
        snmpstatus to the target. (SNMP_WALK)

        * cdl/net_autotest.cdl: Build the new tests.

        * host/snmpwalk.sh: New file: snmpwalk the target's public MIB and
        check target status for the timeout.  Much like the other cases.

        * tests/snmpwalk.c: New file: do one snmpwalk session on each
        interface.

        * tests/snmpmulti.c: New file: ditto, 3 sessions per i/f.

        * tests/snmppings.c: New file: ditto, 2 x snmp, plus some pinging
        and flood pinging simulataneously.

2000-11-09  Hugo Tyson  <hmt@redhat.com>

        * host/obey.sh: Handle the new case of flood pinging the
        target. (FLOOD_PING)

        * host/floodping.sh: New file: flood ping the target, with a
        variable active/sleep ratio so that we can use this to perturb
        other tests also.  An suid executable "./_suping" is needed to be
        able to flood ping automatically.

        * cdl/net_autotest.cdl: Build the two new tests.

        * tests/floodping.c: New file: ask the host to flood ping me, for
        5 minutes in the usual manner.

        * tests/floodpingmux.c: New file: as floodping.c and the target
        floods the host in turn also.

        * host/makefile: Build _suping: it must be set uid &c manually.

        * host/_suping.c: New file: a tiny su root program to run ping
        with real uid root (ping is suid root anyway) to allow us to flood
        the target.

2000-11-08  Hugo Tyson  <hmt@redhat.com>

        * tests/autohost.inl (XFAIL): Detect the configuration that means
        simulated unreliable network is enabled.  Send the XFAIL parameter
        to the network testing server if so.  Also do not check for the
        count of pass messages required in the autohost_end() routine; we
        expect them to go missing and/or there to be failures per se.

        * host/obey.sh (XFAIL): Detect and pass through the XFAIL
        parameter to indicate simulated unreliable network is enabled.

        * host/tftpget.sh (XFAIL): 
        * host/tftpput.sh (XFAIL): 
        * host/slowping.sh (XFAIL): If XFAIL, do not report failures as
        such; also echo the process ID ($$) in messages to help untangle
        the interleaved status messages.

        * host/sendack.sh (XFAIL): Try less zealously and moan less loudly
        if failure is expected.

        * doc/host.txt: Document XFAIL stuff.

2000-10-26  Hugo Tyson  <hmt@redhat.com>

        * tests/slowping.c (net_test): New file: 
        * tests/slowpingmux.c (net_test): New file: simple test, the host
        pings the target (a lot, 10x simultaneously), while the target
        also pings the host in slowpingmux.

        * host/slowping.sh (TARGET): New file: handle target side of ping
        testing.

        * cdl/net_autotest.cdl: Build the new tests.

2000-10-26  Hugo Tyson  <hmt@redhat.com>

        * tests/tftp_serv.inl (do_tftp_tests): Fix typo in info printf;
        nothing of substance.

2000-10-25  Hugo Tyson  <hmt@redhat.com>

        * permtests/netauto_bootp.ptest: net with bootp only init.
        * permtests/netauto_corrupt.ptest: net + 10% rx corruption.
        * permtests/netauto_failrx.ptest: net + 10% rx discards.
        * permtests/netauto_failtx.ptest: net + 10% tx discards.
        * permtests/netauto_rt.ptest: net + snmp + realtime test.
        * permtests/netauto_snmp.ptest: net + snmp.
        * permtests/netauto_std.ptest: standard net config
        New files; permtest configurations for farm testing.

2000-10-24  Hugo Tyson  <hmt@redhat.com>

        * doc/host.txt: More info added; kept up to date.

2000-10-24  Hugo Tyson  <hmt@redhat.com>

        * tests/tftp_serv.inl: New file, the guts of both tftp_serv_get.c
        and tftp_serv_put.c removed to here, so that a number of tests can
        be created to hit the server with different sizes of datafile.
        This is the easiest way to test lots of different filesizes and
        edge conditions; just replicate the testcase.

        * tests/tftp_serv_put.c (FILESIZE): 
        * tests/tftp_serv_get.c (FILESIZE): Use "tftp_serv.inl" with a
        coupla #defines for the op and the filesize to implement the test.

        * tests/tftp_serv_g0.c:   New: get zero and 1-byte datafiles.
        * tests/tftp_serv_g1M.c:  New: get 1Mb and 1Mb-1 datafiles.
        * tests/tftp_serv_g512.c: New: get 512 and 513-byte datafiles.
        * tests/tftp_serv_p0.c:   New: put zero and 1-byte datafiles.
        * tests/tftp_serv_p1M.c:  New: put 1Mb and 1Mb-1 datafiles.
        * tests/tftp_serv_p512.c: New: put 512 and 513-byte datafiles.

        * cdl/net_autotest.cdl: Build all the new testcases to diddle
        different file sizes.

        * host/tftpput.sh (TARGET): Do not read back the file every time;
        check the gotton file once at the end correctly; count up the
        transfers for info.

        * host/tftpget.sh (TARGET): Check the gotton file correctly; count
        up the transfers for info.

2000-10-23  Hugo Tyson  <hmt@redhat.com>

        * host/tftpdata.src: DELETED: we now make our own data files on
        the fly.

        * host/makefile (tmpfile): Build this.  Also add a make clean.

        * host/tmpfile.c (main): New file: builds to a simple executable
        that makes a scratch file full of random data of the length
        requested.  A simple but order-sensitive checksum is appended,
        though the testcase doesn't use this yet.

        * tests/tftp_serv_put.c (do_tftp_tests): 
        * tests/tftp_serv_get.c (do_tftp_tests): Pass a filesize to the
        test script; it will make a temp file accordingly.

        * host/tftpput.sh: 
        * host/tftpget.sh: Parameterize these more so that they accept a
        filesize; the data file is created with random data.

2000-10-20  Hugo Tyson  <hmt@redhat.com>

        * doc/host.txt: New file.  Details the host side code, scripts,
        environment, tempfiles, conventions, output...

        * doc/strategy.txt: New file.  The original design notes.
        
        * host/obey.sh: Correct typo and add . to the path; stupid
        pedantic environment.

2000-10-20  Hugo Tyson  <hmt@redhat.com>

        * tests/tftp_serv_get.c (net_test): 
        * tests/tftp_serv_put.c (net_test): Use the new API, and remember
        how many host sessions we expected to invoke.

        * tests/autohost.inl (autohost_end): New API to check counts of
        PASS and FAIL statii from the hosts.

2000-10-19  Hugo Tyson  <hmt@redhat.com>

        * Changelog: New file.
        * cdl/net_autotest.cdl: New file.
        * host/awaitorder.c: New file.
        * host/makefile: New file.
        * host/obey.sh: New file.
        * host/sendack.sh: New file.
        * host/tftpdata.src: New file.
        * host/tftpget.sh: New file.
        * host/tftpput.sh: New file.
        * tests/autohost.inl: New file.
        * tests/tftp_serv_get.c: New file.
        * tests/tftp_serv_put.c: New file.
        Indeed a new package, even.  Documentation will be forthcoming.

//===========================================================================
// ####GPLCOPYRIGHTBEGIN####                                                
// -------------------------------------------                              
// This file is part of eCos, the Embedded Configurable Operating System.   
// Copyright (C) 1998, 1999, 2000, 2001, 2002, 2009 Free Software Foundation, Inc.
//
// This program is free software; you can redistribute it and/or modify     
// it under the terms of the GNU General Public License as published by     
// the Free Software Foundation; either version 2 or (at your option) any   
// later version.                                                           
//
// This program is distributed in the hope that it will be useful, but      
// WITHOUT ANY WARRANTY; without even the implied warranty of               
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU        
// General Public License for more details.                                 
//
// You should have received a copy of the GNU General Public License        
// along with this program; if not, write to the                            
// Free Software Foundation, Inc., 51 Franklin Street,                      
// Fifth Floor, Boston, MA  02110-1301, USA.                                
// -------------------------------------------                              
// ####GPLCOPYRIGHTEND####                                                  
//===========================================================================