URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
[/] [openrisc/] [trunk/] [rtos/] [ecos-3.0/] [packages/] [net/] [lwip_tcpip/] [current/] [include/] [lwip/] [opt.h] - Rev 786
Compare with Previous | Blame | View Log
/** * @file * * lwIP Options Configuration */ /* * Copyright (c) 2001-2004 Swedish Institute of Computer Science. * All rights reserved. * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY * OF SUCH DAMAGE. * * This file is part of the lwIP TCP/IP stack. * * Author: Adam Dunkels <adam@sics.se> * */ #ifndef __LWIP_OPT_H__ #define __LWIP_OPT_H__ /* * Include user defined options first. Anything not defined in these files * will be set to standard values. Override anything you dont like! */ #include "lwipopts.h" #include "lwip/debug.h" /* ----------------------------------------------- ---------- Platform specific locking ---------- ----------------------------------------------- */ /** * SYS_LIGHTWEIGHT_PROT==1: if you want inter-task protection for certain * critical regions during buffer allocation, deallocation and memory * allocation and deallocation. */ #ifndef SYS_LIGHTWEIGHT_PROT #define SYS_LIGHTWEIGHT_PROT 0 #endif /** * NO_SYS==1: Provides VERY minimal functionality. Otherwise, * use lwIP facilities. */ #ifndef NO_SYS #define NO_SYS 0 #endif /** * MEMCPY: override this if you have a faster implementation at hand than the * one included in your C library */ #ifndef MEMCPY #define MEMCPY(dst,src,len) memcpy(dst,src,len) #endif /** * SMEMCPY: override this with care! Some compilers (e.g. gcc) can inline a * call to memcpy() if the length is known at compile time and is small. */ #ifndef SMEMCPY #define SMEMCPY(dst,src,len) memcpy(dst,src,len) #endif /* ------------------------------------ ---------- Memory options ---------- ------------------------------------ */ /** * MEM_LIBC_MALLOC==1: Use malloc/free/realloc provided by your C-library * instead of the lwip internal allocator. Can save code size if you * already use it. */ #ifndef MEM_LIBC_MALLOC #define MEM_LIBC_MALLOC 0 #endif /** * MEMP_MEM_MALLOC==1: Use mem_malloc/mem_free instead of the lwip pool allocator. * Especially useful with MEM_LIBC_MALLOC but handle with care regarding execution * speed and usage from interrupts! */ #ifndef MEMP_MEM_MALLOC #define MEMP_MEM_MALLOC 0 #endif /** * MEM_ALIGNMENT: should be set to the alignment of the CPU * 4 byte alignment -> #define MEM_ALIGNMENT 4 * 2 byte alignment -> #define MEM_ALIGNMENT 2 */ #ifndef MEM_ALIGNMENT #define MEM_ALIGNMENT 1 #endif /** * MEM_SIZE: the size of the heap memory. If the application will send * a lot of data that needs to be copied, this should be set high. */ #ifndef MEM_SIZE #define MEM_SIZE 1600 #endif /** * MEMP_OVERFLOW_CHECK: memp overflow protection reserves a configurable * amount of bytes before and after each memp element in every pool and fills * it with a prominent default value. * MEMP_OVERFLOW_CHECK == 0 no checking * MEMP_OVERFLOW_CHECK == 1 checks each element when it is freed * MEMP_OVERFLOW_CHECK >= 2 checks each element in every pool every time * memp_malloc() or memp_free() is called (useful but slow!) */ #ifndef MEMP_OVERFLOW_CHECK #define MEMP_OVERFLOW_CHECK 0 #endif /** * MEMP_SANITY_CHECK==1: run a sanity check after each memp_free() to make * sure that there are no cycles in the linked lists. */ #ifndef MEMP_SANITY_CHECK #define MEMP_SANITY_CHECK 0 #endif /** * MEM_USE_POOLS==1: Use an alternative to malloc() by allocating from a set * of memory pools of various sizes. When mem_malloc is called, an element of * the smallest pool that can provide the length needed is returned. * To use this, MEMP_USE_CUSTOM_POOLS also has to be enabled. */ #ifndef MEM_USE_POOLS #define MEM_USE_POOLS 0 #endif /** * MEM_USE_POOLS_TRY_BIGGER_POOL==1: if one malloc-pool is empty, try the next * bigger pool - WARNING: THIS MIGHT WASTE MEMORY but it can make a system more * reliable. */ #ifndef MEM_USE_POOLS_TRY_BIGGER_POOL #define MEM_USE_POOLS_TRY_BIGGER_POOL 0 #endif /** * MEMP_USE_CUSTOM_POOLS==1: whether to include a user file lwippools.h * that defines additional pools beyond the "standard" ones required * by lwIP. If you set this to 1, you must have lwippools.h in your * inlude path somewhere. */ #ifndef MEMP_USE_CUSTOM_POOLS #define MEMP_USE_CUSTOM_POOLS 0 #endif /** * Set this to 1 if you want to free PBUF_RAM pbufs (or call mem_free()) from * interrupt context (or another context that doesn't allow waiting for a * semaphore). * If set to 1, mem_malloc will be protected by a semaphore and SYS_ARCH_PROTECT, * while mem_free will only use SYS_ARCH_PROTECT. mem_malloc SYS_ARCH_UNPROTECTs * with each loop so that mem_free can run. * * ATTENTION: As you can see from the above description, this leads to dis-/ * enabling interrupts often, which can be slow! Also, on low memory, mem_malloc * can need longer. * * If you don't want that, at least for NO_SYS=0, you can still use the following * functions to enqueue a deallocation call which then runs in the tcpip_thread * context: * - pbuf_free_callback(p); * - mem_free_callback(m); */ #ifndef LWIP_ALLOW_MEM_FREE_FROM_OTHER_CONTEXT #define LWIP_ALLOW_MEM_FREE_FROM_OTHER_CONTEXT 0 #endif /* ------------------------------------------------ ---------- Internal Memory Pool Sizes ---------- ------------------------------------------------ */ /** * MEMP_NUM_PBUF: the number of memp struct pbufs (used for PBUF_ROM and PBUF_REF). * If the application sends a lot of data out of ROM (or other static memory), * this should be set high. */ #ifndef MEMP_NUM_PBUF #define MEMP_NUM_PBUF 16 #endif /** * MEMP_NUM_RAW_PCB: Number of raw connection PCBs * (requires the LWIP_RAW option) */ #ifndef MEMP_NUM_RAW_PCB #define MEMP_NUM_RAW_PCB 4 #endif /** * MEMP_NUM_UDP_PCB: the number of UDP protocol control blocks. One * per active UDP "connection". * (requires the LWIP_UDP option) */ #ifndef MEMP_NUM_UDP_PCB #define MEMP_NUM_UDP_PCB 4 #endif /** * MEMP_NUM_TCP_PCB: the number of simulatenously active TCP connections. * (requires the LWIP_TCP option) */ #ifndef MEMP_NUM_TCP_PCB #define MEMP_NUM_TCP_PCB 5 #endif /** * MEMP_NUM_TCP_PCB_LISTEN: the number of listening TCP connections. * (requires the LWIP_TCP option) */ #ifndef MEMP_NUM_TCP_PCB_LISTEN #define MEMP_NUM_TCP_PCB_LISTEN 8 #endif /** * MEMP_NUM_TCP_SEG: the number of simultaneously queued TCP segments. * (requires the LWIP_TCP option) */ #ifndef MEMP_NUM_TCP_SEG #define MEMP_NUM_TCP_SEG 16 #endif /** * MEMP_NUM_REASSDATA: the number of simultaneously IP packets queued for * reassembly (whole packets, not fragments!) */ #ifndef MEMP_NUM_REASSDATA #define MEMP_NUM_REASSDATA 5 #endif /** * MEMP_NUM_ARP_QUEUE: the number of simulateously queued outgoing * packets (pbufs) that are waiting for an ARP request (to resolve * their destination address) to finish. * (requires the ARP_QUEUEING option) */ #ifndef MEMP_NUM_ARP_QUEUE #define MEMP_NUM_ARP_QUEUE 30 #endif /** * MEMP_NUM_IGMP_GROUP: The number of multicast groups whose network interfaces * can be members et the same time (one per netif - allsystems group -, plus one * per netif membership). * (requires the LWIP_IGMP option) */ #ifndef MEMP_NUM_IGMP_GROUP #define MEMP_NUM_IGMP_GROUP 8 #endif /** * MEMP_NUM_SYS_TIMEOUT: the number of simulateously active timeouts. * (requires NO_SYS==0) */ #ifndef MEMP_NUM_SYS_TIMEOUT #define MEMP_NUM_SYS_TIMEOUT 3 #endif /** * MEMP_NUM_NETBUF: the number of struct netbufs. * (only needed if you use the sequential API, like api_lib.c) */ #ifndef MEMP_NUM_NETBUF #define MEMP_NUM_NETBUF 2 #endif /** * MEMP_NUM_NETCONN: the number of struct netconns. * (only needed if you use the sequential API, like api_lib.c) */ #ifndef MEMP_NUM_NETCONN #define MEMP_NUM_NETCONN 4 #endif /** * MEMP_NUM_TCPIP_MSG_API: the number of struct tcpip_msg, which are used * for callback/timeout API communication. * (only needed if you use tcpip.c) */ #ifndef MEMP_NUM_TCPIP_MSG_API #define MEMP_NUM_TCPIP_MSG_API 8 #endif /** * MEMP_NUM_TCPIP_MSG_INPKT: the number of struct tcpip_msg, which are used * for incoming packets. * (only needed if you use tcpip.c) */ #ifndef MEMP_NUM_TCPIP_MSG_INPKT #define MEMP_NUM_TCPIP_MSG_INPKT 8 #endif /** * PBUF_POOL_SIZE: the number of buffers in the pbuf pool. */ #ifndef PBUF_POOL_SIZE #define PBUF_POOL_SIZE 16 #endif /* --------------------------------- ---------- ARP options ---------- --------------------------------- */ /** * LWIP_ARP==1: Enable ARP functionality. */ #ifndef LWIP_ARP #define LWIP_ARP 1 #endif /** * ARP_TABLE_SIZE: Number of active MAC-IP address pairs cached. */ #ifndef ARP_TABLE_SIZE #define ARP_TABLE_SIZE 10 #endif /** * ARP_QUEUEING==1: Outgoing packets are queued during hardware address * resolution. */ #ifndef ARP_QUEUEING #define ARP_QUEUEING 1 #endif /** * ETHARP_TRUST_IP_MAC==1: Incoming IP packets cause the ARP table to be * updated with the source MAC and IP addresses supplied in the packet. * You may want to disable this if you do not trust LAN peers to have the * correct addresses, or as a limited approach to attempt to handle * spoofing. If disabled, lwIP will need to make a new ARP request if * the peer is not already in the ARP table, adding a little latency. */ #ifndef ETHARP_TRUST_IP_MAC #define ETHARP_TRUST_IP_MAC 1 #endif /** * ETHARP_SUPPORT_VLAN==1: support receiving ethernet packets with VLAN header. * Additionally, you can define ETHARP_VLAN_CHECK to an u16_t VLAN ID to check. * If ETHARP_VLAN_CHECK is defined, only VLAN-traffic for this VLAN is accepted. * If ETHARP_VLAN_CHECK is not defined, all traffic is accepted. */ #ifndef ETHARP_SUPPORT_VLAN #define ETHARP_SUPPORT_VLAN 0 #endif /* -------------------------------- ---------- IP options ---------- -------------------------------- */ /** * IP_FORWARD==1: Enables the ability to forward IP packets across network * interfaces. If you are going to run lwIP on a device with only one network * interface, define this to 0. */ #ifndef IP_FORWARD #define IP_FORWARD 0 #endif /** * IP_OPTIONS_ALLOWED: Defines the behavior for IP options. * IP_OPTIONS_ALLOWED==0: All packets with IP options are dropped. * IP_OPTIONS_ALLOWED==1: IP options are allowed (but not parsed). */ #ifndef IP_OPTIONS_ALLOWED #define IP_OPTIONS_ALLOWED 1 #endif /** * IP_REASSEMBLY==1: Reassemble incoming fragmented IP packets. Note that * this option does not affect outgoing packet sizes, which can be controlled * via IP_FRAG. */ #ifndef IP_REASSEMBLY #define IP_REASSEMBLY 1 #endif /** * IP_FRAG==1: Fragment outgoing IP packets if their size exceeds MTU. Note * that this option does not affect incoming packet sizes, which can be * controlled via IP_REASSEMBLY. */ #ifndef IP_FRAG #define IP_FRAG 1 #endif /** * IP_REASS_MAXAGE: Maximum time (in multiples of IP_TMR_INTERVAL - so seconds, normally) * a fragmented IP packet waits for all fragments to arrive. If not all fragments arrived * in this time, the whole packet is discarded. */ #ifndef IP_REASS_MAXAGE #define IP_REASS_MAXAGE 3 #endif /** * IP_REASS_MAX_PBUFS: Total maximum amount of pbufs waiting to be reassembled. * Since the received pbufs are enqueued, be sure to configure * PBUF_POOL_SIZE > IP_REASS_MAX_PBUFS so that the stack is still able to receive * packets even if the maximum amount of fragments is enqueued for reassembly! */ #ifndef IP_REASS_MAX_PBUFS #define IP_REASS_MAX_PBUFS 10 #endif /** * IP_FRAG_USES_STATIC_BUF==1: Use a static MTU-sized buffer for IP * fragmentation. Otherwise pbufs are allocated and reference the original * packet data to be fragmented. */ #ifndef IP_FRAG_USES_STATIC_BUF #define IP_FRAG_USES_STATIC_BUF 1 #endif /** * IP_FRAG_MAX_MTU: Assumed max MTU on any interface for IP frag buffer * (requires IP_FRAG_USES_STATIC_BUF==1) */ #if IP_FRAG_USES_STATIC_BUF && !defined(IP_FRAG_MAX_MTU) #define IP_FRAG_MAX_MTU 1500 #endif /** * IP_DEFAULT_TTL: Default value for Time-To-Live used by transport layers. */ #ifndef IP_DEFAULT_TTL #define IP_DEFAULT_TTL 255 #endif /** * IP_SOF_BROADCAST=1: Use the SOF_BROADCAST field to enable broadcast * filter per pcb on udp and raw send operations. To enable broadcast filter * on recv operations, you also have to set IP_SOF_BROADCAST_RECV=1. */ #ifndef IP_SOF_BROADCAST #define IP_SOF_BROADCAST 0 #endif /** * IP_SOF_BROADCAST_RECV (requires IP_SOF_BROADCAST=1) enable the broadcast * filter on recv operations. */ #ifndef IP_SOF_BROADCAST_RECV #define IP_SOF_BROADCAST_RECV 0 #endif /* ---------------------------------- ---------- ICMP options ---------- ---------------------------------- */ /** * LWIP_ICMP==1: Enable ICMP module inside the IP stack. * Be careful, disable that make your product non-compliant to RFC1122 */ #ifndef LWIP_ICMP #define LWIP_ICMP 1 #endif /** * ICMP_TTL: Default value for Time-To-Live used by ICMP packets. */ #ifndef ICMP_TTL #define ICMP_TTL (IP_DEFAULT_TTL) #endif /** * LWIP_BROADCAST_PING==1: respond to broadcast pings (default is unicast only) */ #ifndef LWIP_BROADCAST_PING #define LWIP_BROADCAST_PING 0 #endif /** * LWIP_MULTICAST_PING==1: respond to multicast pings (default is unicast only) */ #ifndef LWIP_MULTICAST_PING #define LWIP_MULTICAST_PING 0 #endif /* --------------------------------- ---------- RAW options ---------- --------------------------------- */ /** * LWIP_RAW==1: Enable application layer to hook into the IP layer itself. */ #ifndef LWIP_RAW #define LWIP_RAW 1 #endif /** * LWIP_RAW==1: Enable application layer to hook into the IP layer itself. */ #ifndef RAW_TTL #define RAW_TTL (IP_DEFAULT_TTL) #endif /* ---------------------------------- ---------- DHCP options ---------- ---------------------------------- */ /** * LWIP_DHCP==1: Enable DHCP module. */ #ifndef LWIP_DHCP #define LWIP_DHCP 0 #endif /** * DHCP_DOES_ARP_CHECK==1: Do an ARP check on the offered address. */ #ifndef DHCP_DOES_ARP_CHECK #define DHCP_DOES_ARP_CHECK ((LWIP_DHCP) && (LWIP_ARP)) #endif /* ------------------------------------ ---------- AUTOIP options ---------- ------------------------------------ */ /** * LWIP_AUTOIP==1: Enable AUTOIP module. */ #ifndef LWIP_AUTOIP #define LWIP_AUTOIP 0 #endif /** * LWIP_DHCP_AUTOIP_COOP==1: Allow DHCP and AUTOIP to be both enabled on * the same interface at the same time. */ #ifndef LWIP_DHCP_AUTOIP_COOP #define LWIP_DHCP_AUTOIP_COOP 0 #endif /** * LWIP_DHCP_AUTOIP_COOP_TRIES: Set to the number of DHCP DISCOVER probes * that should be sent before falling back on AUTOIP. This can be set * as low as 1 to get an AutoIP address very quickly, but you should * be prepared to handle a changing IP address when DHCP overrides * AutoIP. */ #ifndef LWIP_DHCP_AUTOIP_COOP_TRIES #define LWIP_DHCP_AUTOIP_COOP_TRIES 9 #endif /* ---------------------------------- ---------- SNMP options ---------- ---------------------------------- */ /** * LWIP_SNMP==1: Turn on SNMP module. UDP must be available for SNMP * transport. */ #ifndef LWIP_SNMP #define LWIP_SNMP 0 #endif /** * SNMP_CONCURRENT_REQUESTS: Number of concurrent requests the module will * allow. At least one request buffer is required. */ #ifndef SNMP_CONCURRENT_REQUESTS #define SNMP_CONCURRENT_REQUESTS 1 #endif /** * SNMP_TRAP_DESTINATIONS: Number of trap destinations. At least one trap * destination is required */ #ifndef SNMP_TRAP_DESTINATIONS #define SNMP_TRAP_DESTINATIONS 1 #endif /** * SNMP_PRIVATE_MIB: */ #ifndef SNMP_PRIVATE_MIB #define SNMP_PRIVATE_MIB 0 #endif /** * Only allow SNMP write actions that are 'safe' (e.g. disabeling netifs is not * a safe action and disabled when SNMP_SAFE_REQUESTS = 1). * Unsafe requests are disabled by default! */ #ifndef SNMP_SAFE_REQUESTS #define SNMP_SAFE_REQUESTS 1 #endif /* ---------------------------------- ---------- IGMP options ---------- ---------------------------------- */ /** * LWIP_IGMP==1: Turn on IGMP module. */ #ifndef LWIP_IGMP #define LWIP_IGMP 0 #endif /* ---------------------------------- ---------- DNS options ----------- ---------------------------------- */ /** * LWIP_DNS==1: Turn on DNS module. UDP must be available for DNS * transport. */ #ifndef LWIP_DNS #define LWIP_DNS 0 #endif /** DNS maximum number of entries to maintain locally. */ #ifndef DNS_TABLE_SIZE #define DNS_TABLE_SIZE 4 #endif /** DNS maximum host name length supported in the name table. */ #ifndef DNS_MAX_NAME_LENGTH #define DNS_MAX_NAME_LENGTH 256 #endif /** The maximum of DNS servers */ #ifndef DNS_MAX_SERVERS #define DNS_MAX_SERVERS 2 #endif /** DNS do a name checking between the query and the response. */ #ifndef DNS_DOES_NAME_CHECK #define DNS_DOES_NAME_CHECK 1 #endif /** DNS use a local buffer if DNS_USES_STATIC_BUF=0, a static one if DNS_USES_STATIC_BUF=1, or a dynamic one if DNS_USES_STATIC_BUF=2. The buffer will be of size DNS_MSG_SIZE */ #ifndef DNS_USES_STATIC_BUF #define DNS_USES_STATIC_BUF 1 #endif /** DNS message max. size. Default value is RFC compliant. */ #ifndef DNS_MSG_SIZE #define DNS_MSG_SIZE 512 #endif /** DNS_LOCAL_HOSTLIST: Implements a local host-to-address list. If enabled, * you have to define * #define DNS_LOCAL_HOSTLIST_INIT {{"host1", 0x123}, {"host2", 0x234}} * (an array of structs name/address, where address is an u32_t in network * byte order). * * Instead, you can also use an external function: * #define DNS_LOOKUP_LOCAL_EXTERN(x) extern u32_t my_lookup_function(const char *name) * that returns the IP address or INADDR_NONE if not found. */ #ifndef DNS_LOCAL_HOSTLIST #define DNS_LOCAL_HOSTLIST 0 #endif /* DNS_LOCAL_HOSTLIST */ /** If this is turned on, the local host-list can be dynamically changed * at runtime. */ #ifndef DNS_LOCAL_HOSTLIST_IS_DYNAMIC #define DNS_LOCAL_HOSTLIST_IS_DYNAMIC 0 #endif /* DNS_LOCAL_HOSTLIST_IS_DYNAMIC */ /* --------------------------------- ---------- UDP options ---------- --------------------------------- */ /** * LWIP_UDP==1: Turn on UDP. */ #ifndef LWIP_UDP #define LWIP_UDP 1 #endif /** * LWIP_UDPLITE==1: Turn on UDP-Lite. (Requires LWIP_UDP) */ #ifndef LWIP_UDPLITE #define LWIP_UDPLITE 0 #endif /** * UDP_TTL: Default Time-To-Live value. */ #ifndef UDP_TTL #define UDP_TTL (IP_DEFAULT_TTL) #endif /** * LWIP_NETBUF_RECVINFO==1: append destination addr and port to every netbuf. */ #ifndef LWIP_NETBUF_RECVINFO #define LWIP_NETBUF_RECVINFO 0 #endif /* --------------------------------- ---------- TCP options ---------- --------------------------------- */ /** * LWIP_TCP==1: Turn on TCP. */ #ifndef LWIP_TCP #define LWIP_TCP 1 #endif /** * TCP_TTL: Default Time-To-Live value. */ #ifndef TCP_TTL #define TCP_TTL (IP_DEFAULT_TTL) #endif /** * TCP_WND: The size of a TCP window. This must be at least * (2 * TCP_MSS) for things to work well */ #ifndef TCP_WND #define TCP_WND (4 * TCP_MSS) #endif /** * TCP_MAXRTX: Maximum number of retransmissions of data segments. */ #ifndef TCP_MAXRTX #define TCP_MAXRTX 12 #endif /** * TCP_SYNMAXRTX: Maximum number of retransmissions of SYN segments. */ #ifndef TCP_SYNMAXRTX #define TCP_SYNMAXRTX 6 #endif /** * TCP_QUEUE_OOSEQ==1: TCP will queue segments that arrive out of order. * Define to 0 if your device is low on memory. */ #ifndef TCP_QUEUE_OOSEQ #define TCP_QUEUE_OOSEQ (LWIP_TCP) #endif /** * TCP_MSS: TCP Maximum segment size. (default is 536, a conservative default, * you might want to increase this.) * For the receive side, this MSS is advertised to the remote side * when opening a connection. For the transmit size, this MSS sets * an upper limit on the MSS advertised by the remote host. */ #ifndef TCP_MSS #define TCP_MSS 536 #endif /** * TCP_CALCULATE_EFF_SEND_MSS: "The maximum size of a segment that TCP really * sends, the 'effective send MSS,' MUST be the smaller of the send MSS (which * reflects the available reassembly buffer size at the remote host) and the * largest size permitted by the IP layer" (RFC 1122) * Setting this to 1 enables code that checks TCP_MSS against the MTU of the * netif used for a connection and limits the MSS if it would be too big otherwise. */ #ifndef TCP_CALCULATE_EFF_SEND_MSS #define TCP_CALCULATE_EFF_SEND_MSS 1 #endif /** * TCP_SND_BUF: TCP sender buffer space (bytes). */ #ifndef TCP_SND_BUF #define TCP_SND_BUF 256 #endif /** * TCP_SND_QUEUELEN: TCP sender buffer space (pbufs). This must be at least * as much as (2 * TCP_SND_BUF/TCP_MSS) for things to work. */ #ifndef TCP_SND_QUEUELEN #define TCP_SND_QUEUELEN (4 * (TCP_SND_BUF)/(TCP_MSS)) #endif /** * TCP_SNDLOWAT: TCP writable space (bytes). This must be less than or equal * to TCP_SND_BUF. It is the amount of space which must be available in the * TCP snd_buf for select to return writable. */ #ifndef TCP_SNDLOWAT #define TCP_SNDLOWAT ((TCP_SND_BUF)/2) #endif /** * TCP_LISTEN_BACKLOG: Enable the backlog option for tcp listen pcb. */ #ifndef TCP_LISTEN_BACKLOG #define TCP_LISTEN_BACKLOG 0 #endif /** * The maximum allowed backlog for TCP listen netconns. * This backlog is used unless another is explicitly specified. * 0xff is the maximum (u8_t). */ #ifndef TCP_DEFAULT_LISTEN_BACKLOG #define TCP_DEFAULT_LISTEN_BACKLOG 0xff #endif /** * LWIP_TCP_TIMESTAMPS==1: support the TCP timestamp option. */ #ifndef LWIP_TCP_TIMESTAMPS #define LWIP_TCP_TIMESTAMPS 0 #endif /** * TCP_WND_UPDATE_THRESHOLD: difference in window to trigger an * explicit window update */ #ifndef TCP_WND_UPDATE_THRESHOLD #define TCP_WND_UPDATE_THRESHOLD (TCP_WND / 4) #endif /** * LWIP_EVENT_API and LWIP_CALLBACK_API: Only one of these should be set to 1. * LWIP_EVENT_API==1: The user defines lwip_tcp_event() to receive all * events (accept, sent, etc) that happen in the system. * LWIP_CALLBACK_API==1: The PCB callback function is called directly * for the event. */ #ifndef LWIP_EVENT_API #define LWIP_EVENT_API 0 #define LWIP_CALLBACK_API 1 #else #define LWIP_EVENT_API 1 #define LWIP_CALLBACK_API 0 #endif /* ---------------------------------- ---------- Pbuf options ---------- ---------------------------------- */ /** * PBUF_LINK_HLEN: the number of bytes that should be allocated for a * link level header. The default is 14, the standard value for * Ethernet. */ #ifndef PBUF_LINK_HLEN #define PBUF_LINK_HLEN 14 #endif /** * PBUF_POOL_BUFSIZE: the size of each pbuf in the pbuf pool. The default is * designed to accomodate single full size TCP frame in one pbuf, including * TCP_MSS, IP header, and link header. */ #ifndef PBUF_POOL_BUFSIZE #define PBUF_POOL_BUFSIZE LWIP_MEM_ALIGN_SIZE(TCP_MSS+40+PBUF_LINK_HLEN) #endif /* ------------------------------------------------ ---------- Network Interfaces options ---------- ------------------------------------------------ */ /** * LWIP_NETIF_HOSTNAME==1: use DHCP_OPTION_HOSTNAME with netif's hostname * field. */ #ifndef LWIP_NETIF_HOSTNAME #define LWIP_NETIF_HOSTNAME 0 #endif /** * LWIP_NETIF_API==1: Support netif api (in netifapi.c) */ #ifndef LWIP_NETIF_API #define LWIP_NETIF_API 0 #endif /** * LWIP_NETIF_STATUS_CALLBACK==1: Support a callback function whenever an interface * changes its up/down status (i.e., due to DHCP IP acquistion) */ #ifndef LWIP_NETIF_STATUS_CALLBACK #define LWIP_NETIF_STATUS_CALLBACK 0 #endif /** * LWIP_NETIF_LINK_CALLBACK==1: Support a callback function from an interface * whenever the link changes (i.e., link down) */ #ifndef LWIP_NETIF_LINK_CALLBACK #define LWIP_NETIF_LINK_CALLBACK 0 #endif /** * LWIP_NETIF_HWADDRHINT==1: Cache link-layer-address hints (e.g. table * indices) in struct netif. TCP and UDP can make use of this to prevent * scanning the ARP table for every sent packet. While this is faster for big * ARP tables or many concurrent connections, it might be counterproductive * if you have a tiny ARP table or if there never are concurrent connections. */ #ifndef LWIP_NETIF_HWADDRHINT #define LWIP_NETIF_HWADDRHINT 0 #endif /** * LWIP_NETIF_LOOPBACK==1: Support sending packets with a destination IP * address equal to the netif IP address, looping them back up the stack. */ #ifndef LWIP_NETIF_LOOPBACK #define LWIP_NETIF_LOOPBACK 0 #endif /** * LWIP_LOOPBACK_MAX_PBUFS: Maximum number of pbufs on queue for loopback * sending for each netif (0 = disabled) */ #ifndef LWIP_LOOPBACK_MAX_PBUFS #define LWIP_LOOPBACK_MAX_PBUFS 0 #endif /** * LWIP_NETIF_LOOPBACK_MULTITHREADING: Indicates whether threading is enabled in * the system, as netifs must change how they behave depending on this setting * for the LWIP_NETIF_LOOPBACK option to work. * Setting this is needed to avoid reentering non-reentrant functions like * tcp_input(). * LWIP_NETIF_LOOPBACK_MULTITHREADING==1: Indicates that the user is using a * multithreaded environment like tcpip.c. In this case, netif->input() * is called directly. * LWIP_NETIF_LOOPBACK_MULTITHREADING==0: Indicates a polling (or NO_SYS) setup. * The packets are put on a list and netif_poll() must be called in * the main application loop. */ #ifndef LWIP_NETIF_LOOPBACK_MULTITHREADING #define LWIP_NETIF_LOOPBACK_MULTITHREADING (!NO_SYS) #endif /** * LWIP_NETIF_TX_SINGLE_PBUF: if this is set to 1, lwIP tries to put all data * to be sent into one single pbuf. This is for compatibility with DMA-enabled * MACs that do not support scatter-gather. * Beware that this might involve CPU-memcpy before transmitting that would not * be needed without this flag! Use this only if you need to! * * @todo: TCP and IP-frag do not work with this, yet: */ #ifndef LWIP_NETIF_TX_SINGLE_PBUF #define LWIP_NETIF_TX_SINGLE_PBUF 0 #endif /* LWIP_NETIF_TX_SINGLE_PBUF */ /* ------------------------------------ ---------- LOOPIF options ---------- ------------------------------------ */ /** * LWIP_HAVE_LOOPIF==1: Support loop interface (127.0.0.1) and loopif.c */ #ifndef LWIP_HAVE_LOOPIF #define LWIP_HAVE_LOOPIF 0 #endif /* ------------------------------------ ---------- SLIPIF options ---------- ------------------------------------ */ /** * LWIP_HAVE_SLIPIF==1: Support slip interface and slipif.c */ #ifndef LWIP_HAVE_SLIPIF #define LWIP_HAVE_SLIPIF 0 #endif /* ------------------------------------ ---------- Thread options ---------- ------------------------------------ */ /** * TCPIP_THREAD_NAME: The name assigned to the main tcpip thread. */ #ifndef TCPIP_THREAD_NAME #define TCPIP_THREAD_NAME "tcpip_thread" #endif /** * TCPIP_THREAD_STACKSIZE: The stack size used by the main tcpip thread. * The stack size value itself is platform-dependent, but is passed to * sys_thread_new() when the thread is created. */ #ifndef TCPIP_THREAD_STACKSIZE #define TCPIP_THREAD_STACKSIZE 0 #endif /** * TCPIP_THREAD_PRIO: The priority assigned to the main tcpip thread. * The priority value itself is platform-dependent, but is passed to * sys_thread_new() when the thread is created. */ #ifndef TCPIP_THREAD_PRIO #define TCPIP_THREAD_PRIO 1 #endif /** * TCPIP_MBOX_SIZE: The mailbox size for the tcpip thread messages * The queue size value itself is platform-dependent, but is passed to * sys_mbox_new() when tcpip_init is called. */ #ifndef TCPIP_MBOX_SIZE #define TCPIP_MBOX_SIZE 0 #endif /** * SLIPIF_THREAD_NAME: The name assigned to the slipif_loop thread. */ #ifndef SLIPIF_THREAD_NAME #define SLIPIF_THREAD_NAME "slipif_loop" #endif /** * SLIP_THREAD_STACKSIZE: The stack size used by the slipif_loop thread. * The stack size value itself is platform-dependent, but is passed to * sys_thread_new() when the thread is created. */ #ifndef SLIPIF_THREAD_STACKSIZE #define SLIPIF_THREAD_STACKSIZE 0 #endif /** * SLIPIF_THREAD_PRIO: The priority assigned to the slipif_loop thread. * The priority value itself is platform-dependent, but is passed to * sys_thread_new() when the thread is created. */ #ifndef SLIPIF_THREAD_PRIO #define SLIPIF_THREAD_PRIO 1 #endif /** * PPP_THREAD_NAME: The name assigned to the pppMain thread. */ #ifndef PPP_THREAD_NAME #define PPP_THREAD_NAME "pppMain" #endif /** * PPP_THREAD_STACKSIZE: The stack size used by the pppMain thread. * The stack size value itself is platform-dependent, but is passed to * sys_thread_new() when the thread is created. */ #ifndef PPP_THREAD_STACKSIZE #define PPP_THREAD_STACKSIZE 0 #endif /** * PPP_THREAD_PRIO: The priority assigned to the pppMain thread. * The priority value itself is platform-dependent, but is passed to * sys_thread_new() when the thread is created. */ #ifndef PPP_THREAD_PRIO #define PPP_THREAD_PRIO 1 #endif /** * DEFAULT_THREAD_NAME: The name assigned to any other lwIP thread. */ #ifndef DEFAULT_THREAD_NAME #define DEFAULT_THREAD_NAME "lwIP" #endif /** * DEFAULT_THREAD_STACKSIZE: The stack size used by any other lwIP thread. * The stack size value itself is platform-dependent, but is passed to * sys_thread_new() when the thread is created. */ #ifndef DEFAULT_THREAD_STACKSIZE #define DEFAULT_THREAD_STACKSIZE 0 #endif /** * DEFAULT_THREAD_PRIO: The priority assigned to any other lwIP thread. * The priority value itself is platform-dependent, but is passed to * sys_thread_new() when the thread is created. */ #ifndef DEFAULT_THREAD_PRIO #define DEFAULT_THREAD_PRIO 1 #endif /** * DEFAULT_RAW_RECVMBOX_SIZE: The mailbox size for the incoming packets on a * NETCONN_RAW. The queue size value itself is platform-dependent, but is passed * to sys_mbox_new() when the recvmbox is created. */ #ifndef DEFAULT_RAW_RECVMBOX_SIZE #define DEFAULT_RAW_RECVMBOX_SIZE 0 #endif /** * DEFAULT_UDP_RECVMBOX_SIZE: The mailbox size for the incoming packets on a * NETCONN_UDP. The queue size value itself is platform-dependent, but is passed * to sys_mbox_new() when the recvmbox is created. */ #ifndef DEFAULT_UDP_RECVMBOX_SIZE #define DEFAULT_UDP_RECVMBOX_SIZE 0 #endif /** * DEFAULT_TCP_RECVMBOX_SIZE: The mailbox size for the incoming packets on a * NETCONN_TCP. The queue size value itself is platform-dependent, but is passed * to sys_mbox_new() when the recvmbox is created. */ #ifndef DEFAULT_TCP_RECVMBOX_SIZE #define DEFAULT_TCP_RECVMBOX_SIZE 0 #endif /** * DEFAULT_ACCEPTMBOX_SIZE: The mailbox size for the incoming connections. * The queue size value itself is platform-dependent, but is passed to * sys_mbox_new() when the acceptmbox is created. */ #ifndef DEFAULT_ACCEPTMBOX_SIZE #define DEFAULT_ACCEPTMBOX_SIZE 0 #endif /* ---------------------------------------------- ---------- Sequential layer options ---------- ---------------------------------------------- */ /** * LWIP_TCPIP_CORE_LOCKING: (EXPERIMENTAL!) * Don't use it if you're not an active lwIP project member */ #ifndef LWIP_TCPIP_CORE_LOCKING #define LWIP_TCPIP_CORE_LOCKING 0 #endif /** * LWIP_NETCONN==1: Enable Netconn API (require to use api_lib.c) */ #ifndef LWIP_NETCONN #define LWIP_NETCONN 1 #endif /* ------------------------------------ ---------- Socket options ---------- ------------------------------------ */ /** * LWIP_SOCKET==1: Enable Socket API (require to use sockets.c) */ #ifndef LWIP_SOCKET #define LWIP_SOCKET 1 #endif /** * LWIP_COMPAT_SOCKETS==1: Enable BSD-style sockets functions names. * (only used if you use sockets.c) */ #ifndef LWIP_COMPAT_SOCKETS #define LWIP_COMPAT_SOCKETS 1 #endif /** * LWIP_POSIX_SOCKETS_IO_NAMES==1: Enable POSIX-style sockets functions names. * Disable this option if you use a POSIX operating system that uses the same * names (read, write & close). (only used if you use sockets.c) */ #ifndef LWIP_POSIX_SOCKETS_IO_NAMES #define LWIP_POSIX_SOCKETS_IO_NAMES 1 #endif /** * LWIP_TCP_KEEPALIVE==1: Enable TCP_KEEPIDLE, TCP_KEEPINTVL and TCP_KEEPCNT * options processing. Note that TCP_KEEPIDLE and TCP_KEEPINTVL have to be set * in seconds. (does not require sockets.c, and will affect tcp.c) */ #ifndef LWIP_TCP_KEEPALIVE #define LWIP_TCP_KEEPALIVE 0 #endif /** * LWIP_SO_RCVTIMEO==1: Enable SO_RCVTIMEO processing. */ #ifndef LWIP_SO_RCVTIMEO #define LWIP_SO_RCVTIMEO 0 #endif /** * LWIP_SO_RCVBUF==1: Enable SO_RCVBUF processing. */ #ifndef LWIP_SO_RCVBUF #define LWIP_SO_RCVBUF 0 #endif /** * If LWIP_SO_RCVBUF is used, this is the default value for recv_bufsize. */ #ifndef RECV_BUFSIZE_DEFAULT #define RECV_BUFSIZE_DEFAULT INT_MAX #endif /** * SO_REUSE==1: Enable SO_REUSEADDR and SO_REUSEPORT options. DO NOT USE! */ #ifndef SO_REUSE #define SO_REUSE 0 #endif /* ---------------------------------------- ---------- Statistics options ---------- ---------------------------------------- */ /** * LWIP_STATS==1: Enable statistics collection in lwip_stats. */ #ifndef LWIP_STATS #define LWIP_STATS 1 #endif #if LWIP_STATS /** * LWIP_STATS_DISPLAY==1: Compile in the statistics output functions. */ #ifndef LWIP_STATS_DISPLAY #define LWIP_STATS_DISPLAY 0 #endif /** * LINK_STATS==1: Enable link stats. */ #ifndef LINK_STATS #define LINK_STATS 1 #endif /** * ETHARP_STATS==1: Enable etharp stats. */ #ifndef ETHARP_STATS #define ETHARP_STATS (LWIP_ARP) #endif /** * IP_STATS==1: Enable IP stats. */ #ifndef IP_STATS #define IP_STATS 1 #endif /** * IPFRAG_STATS==1: Enable IP fragmentation stats. Default is * on if using either frag or reass. */ #ifndef IPFRAG_STATS #define IPFRAG_STATS (IP_REASSEMBLY || IP_FRAG) #endif /** * ICMP_STATS==1: Enable ICMP stats. */ #ifndef ICMP_STATS #define ICMP_STATS 1 #endif /** * IGMP_STATS==1: Enable IGMP stats. */ #ifndef IGMP_STATS #define IGMP_STATS (LWIP_IGMP) #endif /** * UDP_STATS==1: Enable UDP stats. Default is on if * UDP enabled, otherwise off. */ #ifndef UDP_STATS #define UDP_STATS (LWIP_UDP) #endif /** * TCP_STATS==1: Enable TCP stats. Default is on if TCP * enabled, otherwise off. */ #ifndef TCP_STATS #define TCP_STATS (LWIP_TCP) #endif /** * MEM_STATS==1: Enable mem.c stats. */ #ifndef MEM_STATS #define MEM_STATS ((MEM_LIBC_MALLOC == 0) && (MEM_USE_POOLS == 0)) #endif /** * MEMP_STATS==1: Enable memp.c pool stats. */ #ifndef MEMP_STATS #define MEMP_STATS (MEMP_MEM_MALLOC == 0) #endif /** * SYS_STATS==1: Enable system stats (sem and mbox counts, etc). */ #ifndef SYS_STATS #define SYS_STATS (NO_SYS == 0) #endif #else #define LINK_STATS 0 #define IP_STATS 0 #define IPFRAG_STATS 0 #define ICMP_STATS 0 #define IGMP_STATS 0 #define UDP_STATS 0 #define TCP_STATS 0 #define MEM_STATS 0 #define MEMP_STATS 0 #define SYS_STATS 0 #define LWIP_STATS_DISPLAY 0 #endif /* LWIP_STATS */ /* --------------------------------- ---------- PPP options ---------- --------------------------------- */ /** * PPP_SUPPORT==1: Enable PPP. */ #ifndef PPP_SUPPORT #define PPP_SUPPORT 0 #endif /** * PPPOE_SUPPORT==1: Enable PPP Over Ethernet */ #ifndef PPPOE_SUPPORT #define PPPOE_SUPPORT 0 #endif /** * PPPOS_SUPPORT==1: Enable PPP Over Serial */ #ifndef PPPOS_SUPPORT #define PPPOS_SUPPORT PPP_SUPPORT #endif #if PPP_SUPPORT /** * NUM_PPP: Max PPP sessions. */ #ifndef NUM_PPP #define NUM_PPP 1 #endif /** * PAP_SUPPORT==1: Support PAP. */ #ifndef PAP_SUPPORT #define PAP_SUPPORT 0 #endif /** * CHAP_SUPPORT==1: Support CHAP. */ #ifndef CHAP_SUPPORT #define CHAP_SUPPORT 0 #endif /** * MSCHAP_SUPPORT==1: Support MSCHAP. CURRENTLY NOT SUPPORTED! DO NOT SET! */ #ifndef MSCHAP_SUPPORT #define MSCHAP_SUPPORT 0 #endif /** * CBCP_SUPPORT==1: Support CBCP. CURRENTLY NOT SUPPORTED! DO NOT SET! */ #ifndef CBCP_SUPPORT #define CBCP_SUPPORT 0 #endif /** * CCP_SUPPORT==1: Support CCP. CURRENTLY NOT SUPPORTED! DO NOT SET! */ #ifndef CCP_SUPPORT #define CCP_SUPPORT 0 #endif /** * VJ_SUPPORT==1: Support VJ header compression. */ #ifndef VJ_SUPPORT #define VJ_SUPPORT 0 #endif /** * MD5_SUPPORT==1: Support MD5 (see also CHAP). */ #ifndef MD5_SUPPORT #define MD5_SUPPORT 0 #endif /* * Timeouts */ #ifndef FSM_DEFTIMEOUT #define FSM_DEFTIMEOUT 6 /* Timeout time in seconds */ #endif #ifndef FSM_DEFMAXTERMREQS #define FSM_DEFMAXTERMREQS 2 /* Maximum Terminate-Request transmissions */ #endif #ifndef FSM_DEFMAXCONFREQS #define FSM_DEFMAXCONFREQS 10 /* Maximum Configure-Request transmissions */ #endif #ifndef FSM_DEFMAXNAKLOOPS #define FSM_DEFMAXNAKLOOPS 5 /* Maximum number of nak loops */ #endif #ifndef UPAP_DEFTIMEOUT #define UPAP_DEFTIMEOUT 6 /* Timeout (seconds) for retransmitting req */ #endif #ifndef UPAP_DEFREQTIME #define UPAP_DEFREQTIME 30 /* Time to wait for auth-req from peer */ #endif #ifndef CHAP_DEFTIMEOUT #define CHAP_DEFTIMEOUT 6 /* Timeout time in seconds */ #endif #ifndef CHAP_DEFTRANSMITS #define CHAP_DEFTRANSMITS 10 /* max # times to send challenge */ #endif /* Interval in seconds between keepalive echo requests, 0 to disable. */ #ifndef LCP_ECHOINTERVAL #define LCP_ECHOINTERVAL 0 #endif /* Number of unanswered echo requests before failure. */ #ifndef LCP_MAXECHOFAILS #define LCP_MAXECHOFAILS 3 #endif /* Max Xmit idle time (in jiffies) before resend flag char. */ #ifndef PPP_MAXIDLEFLAG #define PPP_MAXIDLEFLAG 100 #endif /* * Packet sizes * * Note - lcp shouldn't be allowed to negotiate stuff outside these * limits. See lcp.h in the pppd directory. * (XXX - these constants should simply be shared by lcp.c instead * of living in lcp.h) */ #define PPP_MTU 1500 /* Default MTU (size of Info field) */ #ifndef PPP_MAXMTU /* #define PPP_MAXMTU 65535 - (PPP_HDRLEN + PPP_FCSLEN) */ #define PPP_MAXMTU 1500 /* Largest MTU we allow */ #endif #define PPP_MINMTU 64 #define PPP_MRU 1500 /* default MRU = max length of info field */ #define PPP_MAXMRU 1500 /* Largest MRU we allow */ #ifndef PPP_DEFMRU #define PPP_DEFMRU 296 /* Try for this */ #endif #define PPP_MINMRU 128 /* No MRUs below this */ #ifndef MAXNAMELEN #define MAXNAMELEN 256 /* max length of hostname or name for auth */ #endif #ifndef MAXSECRETLEN #define MAXSECRETLEN 256 /* max length of password or secret */ #endif #endif /* PPP_SUPPORT */ /* -------------------------------------- ---------- Checksum options ---------- -------------------------------------- */ /** * CHECKSUM_GEN_IP==1: Generate checksums in software for outgoing IP packets. */ #ifndef CHECKSUM_GEN_IP #define CHECKSUM_GEN_IP 1 #endif /** * CHECKSUM_GEN_UDP==1: Generate checksums in software for outgoing UDP packets. */ #ifndef CHECKSUM_GEN_UDP #define CHECKSUM_GEN_UDP 1 #endif /** * CHECKSUM_GEN_TCP==1: Generate checksums in software for outgoing TCP packets. */ #ifndef CHECKSUM_GEN_TCP #define CHECKSUM_GEN_TCP 1 #endif /** * CHECKSUM_CHECK_IP==1: Check checksums in software for incoming IP packets. */ #ifndef CHECKSUM_CHECK_IP #define CHECKSUM_CHECK_IP 1 #endif /** * CHECKSUM_CHECK_UDP==1: Check checksums in software for incoming UDP packets. */ #ifndef CHECKSUM_CHECK_UDP #define CHECKSUM_CHECK_UDP 1 #endif /** * CHECKSUM_CHECK_TCP==1: Check checksums in software for incoming TCP packets. */ #ifndef CHECKSUM_CHECK_TCP #define CHECKSUM_CHECK_TCP 1 #endif /* --------------------------------------- ---------- Debugging options ---------- --------------------------------------- */ /** * LWIP_DBG_MIN_LEVEL: After masking, the value of the debug is * compared against this value. If it is smaller, then debugging * messages are written. */ #ifndef LWIP_DBG_MIN_LEVEL #define LWIP_DBG_MIN_LEVEL LWIP_DBG_LEVEL_ALL #endif /** * LWIP_DBG_TYPES_ON: A mask that can be used to globally enable/disable * debug messages of certain types. */ #ifndef LWIP_DBG_TYPES_ON #define LWIP_DBG_TYPES_ON LWIP_DBG_ON #endif /** * ETHARP_DEBUG: Enable debugging in etharp.c. */ #ifndef ETHARP_DEBUG #define ETHARP_DEBUG LWIP_DBG_OFF #endif /** * NETIF_DEBUG: Enable debugging in netif.c. */ #ifndef NETIF_DEBUG #define NETIF_DEBUG LWIP_DBG_OFF #endif /** * PBUF_DEBUG: Enable debugging in pbuf.c. */ #ifndef PBUF_DEBUG #define PBUF_DEBUG LWIP_DBG_OFF #endif /** * API_LIB_DEBUG: Enable debugging in api_lib.c. */ #ifndef API_LIB_DEBUG #define API_LIB_DEBUG LWIP_DBG_OFF #endif /** * API_MSG_DEBUG: Enable debugging in api_msg.c. */ #ifndef API_MSG_DEBUG #define API_MSG_DEBUG LWIP_DBG_OFF #endif /** * SOCKETS_DEBUG: Enable debugging in sockets.c. */ #ifndef SOCKETS_DEBUG #define SOCKETS_DEBUG LWIP_DBG_OFF #endif /** * ICMP_DEBUG: Enable debugging in icmp.c. */ #ifndef ICMP_DEBUG #define ICMP_DEBUG LWIP_DBG_OFF #endif /** * IGMP_DEBUG: Enable debugging in igmp.c. */ #ifndef IGMP_DEBUG #define IGMP_DEBUG LWIP_DBG_OFF #endif /** * INET_DEBUG: Enable debugging in inet.c. */ #ifndef INET_DEBUG #define INET_DEBUG LWIP_DBG_OFF #endif /** * IP_DEBUG: Enable debugging for IP. */ #ifndef IP_DEBUG #define IP_DEBUG LWIP_DBG_OFF #endif /** * IP_REASS_DEBUG: Enable debugging in ip_frag.c for both frag & reass. */ #ifndef IP_REASS_DEBUG #define IP_REASS_DEBUG LWIP_DBG_OFF #endif /** * RAW_DEBUG: Enable debugging in raw.c. */ #ifndef RAW_DEBUG #define RAW_DEBUG LWIP_DBG_OFF #endif /** * MEM_DEBUG: Enable debugging in mem.c. */ #ifndef MEM_DEBUG #define MEM_DEBUG LWIP_DBG_OFF #endif /** * MEMP_DEBUG: Enable debugging in memp.c. */ #ifndef MEMP_DEBUG #define MEMP_DEBUG LWIP_DBG_OFF #endif /** * SYS_DEBUG: Enable debugging in sys.c. */ #ifndef SYS_DEBUG #define SYS_DEBUG LWIP_DBG_OFF #endif /** * TCP_DEBUG: Enable debugging for TCP. */ #ifndef TCP_DEBUG #define TCP_DEBUG LWIP_DBG_OFF #endif /** * TCP_INPUT_DEBUG: Enable debugging in tcp_in.c for incoming debug. */ #ifndef TCP_INPUT_DEBUG #define TCP_INPUT_DEBUG LWIP_DBG_OFF #endif /** * TCP_FR_DEBUG: Enable debugging in tcp_in.c for fast retransmit. */ #ifndef TCP_FR_DEBUG #define TCP_FR_DEBUG LWIP_DBG_OFF #endif /** * TCP_RTO_DEBUG: Enable debugging in TCP for retransmit * timeout. */ #ifndef TCP_RTO_DEBUG #define TCP_RTO_DEBUG LWIP_DBG_OFF #endif /** * TCP_CWND_DEBUG: Enable debugging for TCP congestion window. */ #ifndef TCP_CWND_DEBUG #define TCP_CWND_DEBUG LWIP_DBG_OFF #endif /** * TCP_WND_DEBUG: Enable debugging in tcp_in.c for window updating. */ #ifndef TCP_WND_DEBUG #define TCP_WND_DEBUG LWIP_DBG_OFF #endif /** * TCP_OUTPUT_DEBUG: Enable debugging in tcp_out.c output functions. */ #ifndef TCP_OUTPUT_DEBUG #define TCP_OUTPUT_DEBUG LWIP_DBG_OFF #endif /** * TCP_RST_DEBUG: Enable debugging for TCP with the RST message. */ #ifndef TCP_RST_DEBUG #define TCP_RST_DEBUG LWIP_DBG_OFF #endif /** * TCP_QLEN_DEBUG: Enable debugging for TCP queue lengths. */ #ifndef TCP_QLEN_DEBUG #define TCP_QLEN_DEBUG LWIP_DBG_OFF #endif /** * UDP_DEBUG: Enable debugging in UDP. */ #ifndef UDP_DEBUG #define UDP_DEBUG LWIP_DBG_OFF #endif /** * TCPIP_DEBUG: Enable debugging in tcpip.c. */ #ifndef TCPIP_DEBUG #define TCPIP_DEBUG LWIP_DBG_OFF #endif /** * PPP_DEBUG: Enable debugging for PPP. */ #ifndef PPP_DEBUG #define PPP_DEBUG LWIP_DBG_OFF #endif /** * SLIP_DEBUG: Enable debugging in slipif.c. */ #ifndef SLIP_DEBUG #define SLIP_DEBUG LWIP_DBG_OFF #endif /** * DHCP_DEBUG: Enable debugging in dhcp.c. */ #ifndef DHCP_DEBUG #define DHCP_DEBUG LWIP_DBG_OFF #endif /** * AUTOIP_DEBUG: Enable debugging in autoip.c. */ #ifndef AUTOIP_DEBUG #define AUTOIP_DEBUG LWIP_DBG_OFF #endif /** * SNMP_MSG_DEBUG: Enable debugging for SNMP messages. */ #ifndef SNMP_MSG_DEBUG #define SNMP_MSG_DEBUG LWIP_DBG_OFF #endif /** * SNMP_MIB_DEBUG: Enable debugging for SNMP MIBs. */ #ifndef SNMP_MIB_DEBUG #define SNMP_MIB_DEBUG LWIP_DBG_OFF #endif /** * DNS_DEBUG: Enable debugging for DNS. */ #ifndef DNS_DEBUG #define DNS_DEBUG LWIP_DBG_OFF #endif #endif /* __LWIP_OPT_H__ */